Hp Compaq Mini 700-Fatal Error System Halted CNU9122NHV

Hi I us in my computer Linux Mint i think so but now i start my computer and get this message..
Fatal Error System Halted CNU9122NHV.
I am not so good in english are from Sweden..And i hope someone can help me..
Thank you!!

CNU9122NHV IS THE CODE FATAL ERROR. I am not from USA Or London..I can read and write better in Swedish my english is ok not to good! I hope someone here give rigth code to my computer...

Similar Messages

  • HP MINI 110 FATAL ERROR SYSTEM HALTED . [edited] .!!!

    HP MINI 110 LAPTOP FATAL ERROR SYSTEM HALTED .
    [edited Serial Number by Moderator]
    plz ANYbody SOLVE THAT PROBLEM. I HAV NOT OPEN MY LAP SINCE 3 MONths..

    Cowboys try. e9lo3qquu9 3rd letter lowercase L. 4th letter lowercase O. 6th  and  7th letter lowercase Q.  Use that code to go into the BIOS. Disable all passwords that are enabled. If asked for the CURRENT password use that code. If asked for NEW password just hit enter. If asked to VERIFY password just hit enter. Save and exit. REO  I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damage that may arise to your system by using these services. Please be aware that you do this at your own risk.

  • HP MINI 110 FATAL ERROR SYSTEM HALTED

    Hi, I have a HP MINI 110 and I forgot the password for bios.
    After three unsuccessful attempts on the screen appears:   FATAL ERROR SYSTEM HALTED CNU9459FB0
     s/n(Personal information removed by Moderator)  - p/n: VJ205EA#UUZ 
    Thank you
    Text translated with google
    This question was solved.
    View Solution.

    Hi,
    Enter:     e9lovqo8p1     ( 3rd character is a lower case L )
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Password check failed fatal error system halted CNU9384PJY

    BOOTING ENTER CURRENT PASSWORD THREE TIMES GOES TO PASSWORD CHECK FAILED FATAL ERROR SYSTEM HALTEDCNU9384PJY AFTER NETBOOK SET UP FOR A WHILE THANKS FOR ANY HELP

     Enter:    e9lofuv2wi     ( 3rd character is a llower case L ) Regards, DP-K

  • Password Check Failed, Fatal Error, System Halted, CNU949701P

    Hello!
    I have a HP netbook model Mini CQ 10, and I have not switched it on in a while.
    I recently went to turn it on to recover some important documents and this error message shows up;
    Password check failed
    Fatal Error... System Halted
    CNU949701P
    Canu anyone PLEASE HELP ME! I would be so grateful!
    Thank you!
    x
    This question was solved.
    View Solution.

    Try >> e9lovox132
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • HELP! Fatal error system halted CNU00974PL in compaq mini CQ10

    The Bios is not working, it only shows that I need a password! but i don't have any.. someone, please help me!!

    Please try this password:  e9l11oxv2k Steps to be followed after you reset the password:Use the unlock code posted above to enter the BIOSDisable all passwords that are enabledIf asked for current password - type the unlock codeFor new password, just press ENTER keyRepeat the same for verify password column.Then leave the BIOS by saving & exit option to save the changes. Troubleshooting Steps:Incase if the Password doesn’t work please try a Hard Reset as follows.Shut down the notebookUnplug the AC Adapter and then remove the batteryHold  down the Power button for 30 secondsPlug in the Power/AC Adapter (Leave the battery out for the moment) & Start the NotebookIf you now see a password box, Please type the same Password I shared before and press enter  Hope this helps, for any further queries reply to the post and feel free to join us again  **Click the White Thumbs Up Button on the right to say Thanks**Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. Thank You,KNRKAlthough I am an HP employee, I am speaking for myself and not for HP

  • Re: hp mini fatal error system halted. CNU9363XZL NEED PASSWORD HELP????

    Thanks you for help!! Godbless.....
    This question was solved.
    View Solution.

    Hi,
    Try entering:    e9lofgf40k      ( Note that in both cases, the 3rd character is a lower case L and the 9th is Zero )
                                          or
                                  e9lofgfr0k
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Compaq mini 700 enter current password fatal error system hatled

    Compaq mini 700 laptop fatal error system halted. 
    CNU9192NQN
    Can you help me plz ? 
    This question was solved.
    View Solution.

    Hi
    Try this : e9lo3o7959
    Let us know how it goes!
    "I work for HP."
    ****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    Regards
    Manjunath

  • Compaq mini 700 model 735ED windiws 7 password check failed system halted CNU91453V3

    Ciao sono nuovo nella comunita ,e non so ancora bene come funziona.
    ma come o gia detto o un compaq mini 700 model 735ED con windiws 7 e ho acceso stamattina e sulla schermata nera mi diceva di inserire la password al bios ,(non so se ci ha messo le mani mio figlio ma e strano) quindi dopo vari di inserimenti password mi dice " password check failed system halted CNU91453V3" vi prego aiutatemi

    Hi,
    Please see the reply on your earlier thread on the following link.
    http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and-Software/hp-mini-compaq-700/m-p/4491550#...
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Getting Fatal error system Haulted........Message code CNU9318J82

    When I turn on my Laptop that I bought from a pawn shop, I get an error message below...
    Password check failed.
    Fatal Error.....System Halted.
    CNU9318J82
    This question was solved.
    View Solution.

    Hi:
    Reboot and enter the code:
    e9lof3uwu7

  • No audio on jack for compaq mini 700 (702EA) running XP proffesion​al

    hi,
    I have no audio coming out on the audio jack (headphones).
    my compaq mini 702 EA is running XP profesional.
    any ideas?
    thank you

    Try downloading and installing bootcamp 3.1 it fixed my sound for me.

  • Hardware error system Halted

    Bought 30 computers with Windows 7 to replace XP machines. Made the initial install of all the software needed and assigned static ip addresses and to make sure I didn't have any DOA machines.
    When reattaching a client computer to the network the server 2008 r2 domain controller, has a hardware fault and halts.
    I'm trying to figure out what would cause that to happen. I'm already pulled it and going to re-install windows 7 on it. I'm just want to know what is causing it.
    Anyone with an idea why?
    Thx,
    Bill

    Thanks for the reply.
    The 7 computer itself isn't freezing. It causes the server to blue screen, "Hardware fault" "System Halted". It happens every time it is turned on while connected to the network.
    It has a static IP address. I moved it to another office to test the wiring and it halted the server from that office too. This machine was connected before when I initially set it up with name, IP address and the default software we use and make to make
    sure it wasn't DOA.
    Needless to say I've taken this machine out of service. I'm going to reinstall Win7 on it and then try it again.
    Any other ideas?
    Bill

  • Hp mini laptop fatal error code

    I keep getting fatal error code CNU9277JZ I don't know the password and can't get in it and my mother doesn't remember it.

    Hi,
    Please try (all lower cases):
        e9lo7xxw07 (the 3rd char is lower case of L and 9th char is a zero).
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Hp mini 110 fatal error passcode

    My s/n is CNU0074LL6 and i need the passcode it wont let me on it without it. Please help it will be greatly appreciated!!
    This question was solved.
    View Solution.

    Hi,
    Please try (lower case)
         e9l11xvkkg
    or try 3 times and post the error code back
    Regards
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Compaq Mini 700 will neither run from, nor charge the battery

    Netbook will only run from mains charger.
    Original battery flat, battery icon has a red cross through it.
    I tried a n new battery which is recognised as 56% charged.
    No charge light and no "charging" message. Netbook shuts down when the charger lead is removed.
    I have replaced the power socket as the connections looked suspect, but still no joy.
    Any suggestions?
    model 702EA  Windows XP

    OK, I guess I'm  having the same problem... When the "Mini" was purchased, everything worked fine. I normally leave the "Mini" with the AC adapter plugged in on my desk. The little light by the plug on the computer is illuminated, so I'm supposing that the unit is charging. However, when I unplug  the unit from the adapter, the computer shuts off, and it will not turn back on unless it is plugged into the adapter (so much for portability)... Any suggestions??

Maybe you are looking for

  • Blend tool to objects with no fill (transparency)

    Is it possible to create a blend using the blend tool with one of the objects to be blended being transparent (having no fill or outline)? If not, could someone please suggest an alternate solution? I know I can do something somewhat similar with gra

  • Error in NWDIs CMS

    Hi Experts, I am getting the following error when trying to check-in components in the transport studio of NWDIs CMS: Unexpected error; inform your system administrator:com.sap.cms.util.exception.CMSUnexpectedException: Pls help me to solve this erro

  • In MM02 I want to update in Costing2 tab using BAPI

    Hello, I am asked to update certain values in MM02 t.code, Costing2 tab. I am asked to do this via BAPI. Recording techniques like CATT and BDC doesnt work since the recording cannot capture mouse scrolls which is needed to reach Costing2 tab. Can so

  • Terminal doesn't take password

    My friend's Leopard-equipped PowerBook G4 latch is broken, so I'm trying to turn off automatic lid wake on that laptop, as I have done successfully on my own PowerBook G4 with Tiger. I can paste or type the usual command into Terminal... sudo pmset l

  • K1 -- What are these 3 ICONS managing?

    All 3 are CYAN/WHITE-COLORED and appear to be stock (Android -or- Lenovo) icons, resident on the desktop when the tablet is first shipped: AUDIO HORN PADLOCK Some kind of TILTING thing **bleep**, I don't have a clue what it does LOL kv Product = K1 I