HP Control Zone and Windows 10

I have the exact same issue with the trackpad. Laptop: HP Envy TS15 - q006tx Now that my laptop is oerating on Windows 10, is there anyway to reassign the old swipe functionalities of the control zone? Back in Windows 8.1, swiping the left side of the trackpad used to swap between apps and swiping on the right used to bring up charms. These features are now obsolete, so really I hope that I can replace them with something else, or at least in a future driver patch if not today.

Two issues I am having with the Windows 10 upgrade: First, I use a wireless mouse, since my computer is primarily for graduate school and typing papers. I have the setting via the Control Zone to turn OFF the touchpad when an external pointing device is in use. This setting will NOT stay. I have to re-open the control panel, navigate to the device options, and turn this on EVERY time I start my computer. Is there a patch to fix this? Or is there a registry item I can change to force this setting to remain on? I never want the touchpad operational if I am using a USB mouse (or any USB or external pointing device). I cannot find this answer on any search. Second is the NumLock. I had changed the registry item to force NumLock to be "On" on boot. I cannot get the computer to boot with NumLock on with Windows 10. This is incredibly important for my startup process. Thank you in advance for any advice/solutions!

Similar Messages

Removing control bar and windows bar

Is it possible to somehow remove flash control bar (bar with
buttons File, View, Control and Help) and windows bar with
minimalization, maximalization and termination buttons from flash
movie?

you only see that when you play the swf with the stand alone
flash viewer. No one will see that if they open it using a web
browser. Right-click the swf and choose open with IE (or whatever
browser you use) and you will see what they will see. BTW, a web
browser uses the flash plugin. The only people that have the stand
alone player (usually) are people that have Flash installed on
their computer

Icloud Control Panel and Windows XP

I want to use icloud control panel to upload my phones from my ipad to my computer, but I have Windows XP and Control Panel 3.0 won't work with Windows XP. How can I do this with my current version of Windows?

photos, not phones... Sorry for the typo.c

ICloud Control Panel and Windows 8

I cannot get it to install.....any help?

iCloud Control Panel is available in the Control Panel. To access to it, access to the desktop, right-click at the bottom left corner (where Start button should be) and choose Control Panel. Then, go to Network & Internet, and you will find iCloud there, so open it and log in with your Apple ID to access to iCloud

Erratic HP Control Zone Behaviour

I Recently purchased the laptop about 3 Weeks ago, and I began to notice the Synaptic HP Control Zone mouse would behave erraticly after some time. A reset of the device driver seems to fix it but the problem returns again when some time passes.
Everything seems to be upto date and the Control zone works with multitouch and normal use but this unsual and erratic behaviour that occurs quite often has become quite irritating. I've resorted to disabling the Control Zone and I am currently using an external wireless mice I purchased with the laptop.
Driver:
HP Control Zone - V18.1.7.8
A video of the issue
http://youtu.be/a8iXk0Wyjv0
Any help would be greatly Appreciated

I recently bought an HP Envy as well and I have multitutde of problems with the Control Zone. The only solution is whenever it happens I have to use the touchscreen to get to "HP Control Zone Settings" and do a "Reset Devices".
Has anyone found a permanent fix for this?
-- Amal

Problem with remote control and Windows 7 - HP Pavilion 6301eu

I installed Windows 7 32-bit and my remote control does not work. I have tried all possible drivers and still nothing ... Photo driver attached. Does anyone have a link to the current drivers for the remote control and Windows 7? thank you

Hi John:
Thanks but, I had already done this. I was having THAT problem with Encore (could not even initialize before tanking) when I first installed it and that's when I updated the Roxio engine. I don't know what else there is to update or correct at this point.
There was one thing that occurred to me: When I was using XP, I had to disable Open GL in order to get Encore to stabilize. I've heard one recommendation for Encore that one must disable graphics acceleration. I would like try that here except I can't figure out how to do that in Windows 7.
I've been Googling "Windows 7 Disable Graphics Accel" and have come up with nothing useful.
Thanks for your help though and if you have any other ideas, I'm all ears.
Mark

I have a pc running windows 7. I got an Airport Extreme 802.11n Wi-Fi and the printer is now plugged into the Airport. The wireless router works fine but the printer shows as offline in control panel and in word. The printer is a HP LaserJet CP1525nw.

I have a pc running windows 7. I got an Airport Extreme 802.11n Wi-Fi and the printer is now plugged into the Airport. The Airport works fine but the printer shows as offline in control panel and in word. The printer is a HP LaserJet CP1525nw.

+For now I have it set to Share Public IP address - Is this correct for my Network Setup with The Airport Extreme being the only router being used ?+
This would be the correct setting if the AirPort Extreme is connected to a simple modem (one ethernet port).
*Settings I have Enabled*
5 GHz name indicates that you have elected to use the option to assign a separate name to the 5 GHz network. This will allow you to "tell" compatible computers to connect to that network, rather than the slower 2.4 GHz network
Use Wide Channels is recommended for 5 GHz operation.
Interference Robustness often does more harm than good and should not be used unless you know you are in a area with a lot of wireless networks and you feel that your network is experiencing interference issues from a nearby network.

Time zone problem between mac and windows

i'm running os x snow leopard on one partition and windows 7 on another on a 2008 mbp. whenever i log into windows and then get back onto mac, my time is completely off. i can temporarily fix it by removing the local time file, which resets it, but every time i log into windows and back i get the same problem. i've tried turning off the automatic time zone, tried turning off auto everything and just setting the time myself and it always goes back to being messed up after a trip to the windows partition.
anybody got a fix?

For windows users can you create a connection key in Windows machine and send the same.

Is anyone experiencing problems with opening mission control from the desktop. Running mountain lion with parallels 7 and windows 7

is anyone experiencing problems with opening mission control from the desktop. Running mountain lion with parallels 7 and windows 7

I had been having a similar problem on Lion with Safari pdf files despite downloading the latest Adobe Reader XI.
I would constantly get the same messages - There was an error opening this document. The file is damaged and could not be repaired. And I would get a blank page when I tried to print the pdf if I tried printing from the Safari web page using File - Print from the top toolbar on my laptop.
Then I came across the grey Safari lozenge with action icons.
This allowed me, without downloading the pdf, to print the pdf file direct from the Safari page by using the Print icon on the grey lozenge that appears centrally three quarters down the screen.
Then I discovered that if I save the pdf using the Save icon from this same grey lozenge on the Safari page I can open and print this pdf version from my desktop.
I've tested it with a couple of different pdf files and these methods work using the grey lozenge icons but the same pdfs files don't work using File - Save As on the Tool Bar.

Fel: 0x8004010F: ZebraMapiCopySession::CreateMobileMeMessageStore: CreateMessageService failed This is what i get when i try to activate contacts in the icloud control panel and no contacs are syncronised..... iPhone 3GS, Windows 7

Fel: 0x8004010F: ZebraMapiCopySession::CreateMobileMeMessageStore: CreateMessageService failed
This is what i get when i try to activate contacts in the icloud control panel and no contacs are syncronised.....
iPhone 3GS, Windows 7

After much some reasearch I fixed this problem for my problem computer. I have two computers running Windows 7 64-bit, one working with iCloud contact/calendar sync and the other getting this "0x8004010F: ZebraMapiCopySession::CreateMobileMeMessageStore: CreateMessageService failed" error (when you look at the report data to Apple).
So when I compared my system to a working system, I found that there was a difference in the bit-named DLL used by iCloud.
Go to Outlook, File, Options, Add-Ins and in the Active Application Add-ins section highlight "iCloud Outlook Addin". You'll find the DLL name there.
On my working computer, it was APLZOD6432.DLL, while on my problem computer it was APLZOD32.DLL. Ah ha! Its trying to setup Outlook 64 with a 32-bit iCloud DLL. Or so I thought.
I looked for a 64-bit specific install for iCloud. Nope, iCloud 1.1 is for both. Hmmm...
I thought I had installed Office 2010 64-bit on my problem computer, but apparently I installed 32-bit. I was able to confirm this by going into Outook, File and Help. Under "About Microsoft Outlook" it said 32-bit. Checking the working computer, it was showing 64-bit Outlook.
So this also brought another thought to my mind. Maybe the problem is because I installed the iCloud control panel before I installed Office 2010. That said, I uninstalled iCloud Control Panel (Add/Remove Programs), and re-installed it from the manual download page http://support.apple.com/kb/DL1455 and tried contact syncing again. It worked!
Then I went to check the DLL in use. It was APLZOD32.DLL. So perhaps iCloud sets up for 64-bit Office when no office is installed on Windows 7 64-bit and breaks when you install 32-bit. Or there is a part of iCloud install that needs to be done with Office installed. Either way, I'm happy to have the issue fixed. Leaving the 32-bit Office there for now.

Outlook 2010 and the I Cloud Control Panel for Windows

After setting up the I Cloud Control Panel for Windows on my PC and watching it upload and download all of my Outlook 2010 calendar, I find that I now have 4 calendars: my calendar, an I Cloud calendar, another called Pocket Mirror Archive - I Cloud and yet another called Pocket Mirror Conflict - I Cloud. Also, Outlook is now very, very slow and unresponsive when I do anything and hangs up a lot for a minute or so. Do I need to keep all of these calendars open? And what's with the Pocket Mirror Calendars? And which one should I enter things into?
Then when I checked Contacts from Outlook in the Control Panel, it uploaded and downloaded and then permanently hung up with the wheel turning in the setup process - finally had to use Task Manager to exit the Control Panel.
I haven't yet changed my I phone or my I pad or my Macbook Air over to the cloud, mostly afraid to because when I've tried it previously, it caused all kinds of missing calendar items or duplicates and I had to erase it all and re-do the sync with I Tunes, the old way after restoring my .pst file and restoring my phone from a backup.
Do I dare re-connect my phone and ipad to the cloud now that Outlook is uploaded there?
Or must I just forget the cloud completely and stick to I Tunes?
Can anyone help me out with all of this? I know it's a lot of questions, but I'm at my wit's end.
Thanks in advance.

Why are you running Pocket Mirror, do you have a Palm device?
Uninstall Pocket Mirror, delete the 2 Pocket Mirror calendars, ignore 'My Calendar' the iCloud calendar is the one to use.
If you do not uninstall Pocket Mirror the calendars will keep recreating themselves

The keyboard shotcut to top of page was Control+home and to bottom was control+end. Now I am running Windows 8.1 neither works. Is there a keyboard shortcut?

Untii now the keyboard shortcut to top of page was control+home and to end was control+end. Now I am running Windows 8.1 and Firefox Beta neither of these work. Neither does control++ or control+0. (They did not work before I upgraded Firefox while I was using W8.1). Is there any keyboard shortcut to get immediately to top and to end?

Home and End without the Ctrl key should be sufficient to go to the top and bottom of a page.<br />
You only need the Ctrl key if you are in a text area.
Do you otherwise have problems with scrolling a page?
Does the Ctrl key work otherwise?
Did you try a new profile?
Create a new profile as a test to check if your current profile is causing the problem.
See "Creating a profile":
*https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
If the new profile works then you can transfer files from a previously used profile to the new profile, but be cautious not to copy corrupted files to avoid carrying over the problem
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

Windows server 2008 can't access control panel and can't choose "properties" under "my computer"

Hello everyone!
Today after a schedule restart on the night I thought everything was normal with my server. But When i go to "start -> control panel" it show me "empty". And if I try to lunch "change/remove software" via search window in
"start" then nothing happen.
I know also that I can't right click on "computer" and choose "properties" in the start-menu.
Also another problem. I did install Fbackup to make schedule file backups on the night. The software worked well to launch when I had installed it, but after the night, this morning it just crash on launch.
I can also tell that I did add from 4 CPU core to 6 CPU cores.

Hi,
Have you tried to see if the issue persists when you boot into Safe Mode? Since you it shows blank when accessing Control Panel, please check if the policy setting below has been
configured.
Please choose Start – Run - type (gpedit.msc) - click on (Administrative Templates) - (control Panel) -
Prohibit access to Control Panel and Show only specified Control Panel applets. If they were configured, please disable them to see if it could resolve the issue.
In addition, the issue may also be caused by the virus, please run a system scan to see if there is any virus. At this time, you can also launch Control Panel apps from the command
line, and here's a list of .cpl files for your reference that you can print out:
Accessibility Options
access.cpl
Add/Remove Programs
appwiz.cpl
Add Hardware Wizard
hdwwiz.cpl
Automatic Updates
wuaucpl.cpl
Bluetooth Properties
bthprops.cpl
Display Properties
desk.cpl
Firewall Properties
firewall.cpl
Game Controllers
joy.cpl
Internet Options
inetcpl.cpl
iSCSI Initiator
iscsicpl.cpl
Java Control Panel
jpicpl32.cpl
Licensing Mode
liccpa.cpl
Mouse Properties
main.cpl
Network Connections
ncpa.cpl
Network Setup Wizard
netsetup.cpl
ODBC Properties
odbccp32.cpl
Power Options
powercfg.cpl
Regional and Language Options
intl.cpl
Sound and Audio Devices
mmsys.cpl
Stored Passwords
keymgr.cpl
System Properties
sysdm.cpl
Telephone and Modem Properties
telephon.cpl
Time and Date Settings
timedate.cpl
User Accounts
nusrmgr.cpl
Windows Security Center
wscui.cpl
Wireless Link
irprops.cpl
Hope this helps.
Regards,
Andy Qi
Andy Qi
TechNet Community Support

Forms Authentication Error: User '' does not have required permissions. Verify that sufficient permissions have been granted and Windows User Account Control (UAC) restrictions have been addressed

I created a custom security extension following the steps listed in the Readme_Security Extension Sample. It works fine if I login as the user that is specified AdminConfiguration section of the rsreportserver.config file but if I
log in as another user, I get this error: User '' does not have required permissions. Verify that sufficient permissions have been granted and Windows User Account Control (UAC) restrictions have been addressed. I've added the user to both System Administrator
and System User roles to try to get it to work but still no luck.
Does anyone know how to fix this?
Thanks.

Hi MetronM,
The issue is due to that user have no permission to access the report server. In report manager, Reporting Services includes predefined roles that we can assign to users and groups to provide immediate access to a report server. Each role defines a collection
of related tasks.
You can refer to the following steps to assign corresponding role to the user.
Open report manager.
Click “Folder Setting” button.
Click “New Role Assignment” icon.
Type the user name and select the corresponding role.
There is an article about Granting Permissions on a Native Mode Report Server, you can refer to it.
http://technet.microsoft.com/en-us/library/ms156014.aspx
Regards,
Alisa Tang
Alisa Tang
TechNet Community Support

X230t and Windows 8 - tablet rotate and control buttons don't work

I am the proud owner of a new x230 tablet and I couldn't resist the tempation to load up Windows 8 on it. Overall I have found the operating system to work fairly well on the system as installed "out of the box"; however, I have noticed that when the computer is put in tablet mode the screen doesn't rotate, even if the rotate hardware button is pressed. Has anyone else encountered this and if so is there a solution other then waiting for the official release of the operating system and windows 8 certified drivers.
Thanks

This is for win7 but should also work in win8 because it is a simple configuration thing:
http://answers.microsoft.com/en-us/windows/forum/windows_7-desktop/how-torotate-screen-in-windows-7-...
similar:
http://answers.yahoo.com/question/index?qid=20070808054356AAufqKb
Using x230t (i5-3320M, 8GB RAM, 256GB SSD, 80GB mSata-SSD) and loving it!
"I may not own the world but I own my mind and therefore the world is at my feets." (me)

HP Control Zone and Windows 10

Similar Messages

Maybe you are looking for