HP CoolSense 2.0 removed and refusing to install after updating Windows on DV7 Notebook

Last year I got the HP Pavilion dv7 Notebook PC and it had Coolsense 2.0 on it but sometime last month I updated my laptop against my better judgement and CoolSense got removed, I love to play games and it's really difficult when you're trying to play Minecraft and your laptop overheats, I can invest in a cooling pad for my laptop but I'd rather have my computer running with CoolSense and save the $30 I would spend on purchasing a cooling pad for my computer. I have tried reinstalling it many times but I get an error message which is pictured below. I know my computer supports 2.0, it's just failing to install, and to get to the area where it even attempts to install I have to go into my SWSetup folder and look for the setup files manually, other wise it just says it's preparing the installer and never installs.
Product number: LW472UA#ABA
Windows 7 Home Premium 64-bit Service Pack 1
Error: 

Try updating the HP Software Framework. In the Windows Installer Clean Up, it shows it listed, but it is not the most recent version. The HP Software Framework is required for Coolsense to work properly. 
My recommendation would be to uninstall the HP Software Framework and then install this more recent version:: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloa​dIndex?softwareitem=ob-110992-1&cc=us&dlc=en&lc=en​...
After installing that, try to reinstall CoolSense using the download here: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloa​dIndex?cc=us&lc=en&dlc=en&softwareitem=ob-99160-1
Also, some systems have CoolSense tied to HSPA, do you know if HSPA is functioning properly? 
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Similar Messages

  • WTPe Build 9879 RSAT Removed and will not install

    After 9879 installed, RSAT was removed and receive this message while reinstalling:
    Windows Update Standalone Installer encountered an error 0x8024001d.
    I need to get this working again asap.
    Thank You

    Ok I have a solution to this problem now.
    Expand WindowsTH-KB2693643-x64.msu by using the following command:
    WUSA WindowsTH-KB2693643-x64.msu /extract:<destination>
    Then from an elevated command prompt run the following command where the extracted files are located:
    pkgmgr /ip /m:<locationoffiles>\WindowsTH-KB2693643-x64.cab for example
    pkgmgr /ip /m:c:\temp\rsat\WindowsTH-KB2693643-x64.cab
    Wait for a few minutes then this will pop up:
    Restart your PC and your right to go. Tools should be installed now and working.
    Cheers
    Damon
    Thanks Damon,
    Instead of using pkgmgr I used the following command:
    DISM.exe /Online /Add-Package /PackagePath:C:\WindowsTH-KB2693643-x64.cab

  • I just got creative cloud 2014 and decided to install After effects on my laptop. I get error to install Adobe Application Manager. I got AAM but installing it, I got an error message "Installer failed to initialize. Please download Adobe support advisor"

    I just got creative cloud 2014 and decided to install After effects on my laptop. I get error to install Adobe Application Manager. I got AAM but installing it, I got an error message "Installer failed to initialize. Please download Adobe support advisor" Now, the support advisor is discontinued. What do I do?
    Please anyone help me.
    Thanks

    Error "Installer Failed to Initialize" | Install desktop application | Windows

  • After updating windows 7 and firefox i constantly receive timed out or server not found messages

    i constantly receive timed out or server not found messages after updating windows 7 and firefox 2 weeks ago. this was almost never a problem prior to updating

    Connection Errors
    https://support.mozilla.com/en-US/kb/Error%20loading%20web%20sites#w_connection-errors
    Interrupted or Reset Connection
    https://support.mozilla.com/en-US/kb/Error%20loading%20web%20sites#w_interrupted-or-reset-connection
    Check and tell if its working.

  • Why does the installer not open and finish the install after it downloads?

    I do not not understand why the downloader will not open and finish the install after it downloads - all I get is more advertising junk trying to sell me things I don't need.

    The Adobe Download Assistant.    I took a screen shot, and it is just kind of stuck here.

  • Ipad 2 facetime and Imessage didnt work after updated to IOS 7.

    Hi everyone,my problem is my Ipad 2 facetime and Imessage didnt work after updated to IOS 7. When i try to login ,it's keep saying
         "facetime activation could not sign in please check your network connection" or
         "fImessage activation could not sign in please check your network connection"
    so,i reset everything and reset my network too,but nothing change.
    BUT,when i connect my ipad 2 with my iphone using ad-hoc,the facetime and Imessage worked really good,just like normal.
    And my iphone using Optus network.,So when i connect like that,my iphone using 3G and share ad-hoc to my ipad and everything work fine.
    SO,anyone having idea of how to fix this problem,please,help me. And thanks alot for your time .I just want everything working normally just like before i update to IOS 7.
                   NOTE : before i update my ipad and my iphone,everything worked fine with my wireless router. It's just happen to my ipad since the update.
    Thanks alot for your time ,any idea will be very helpful to me at this time. Again,thanks for you help .

    backup the device with itunes.
    Restore the device with itunes and set up as new.
    Sign into the facetime and imessage to activate it.
    After that is done and activation is good.
    Restore from the backup.
    Then make sure to sign into facetime and imessage again and you should be good to go

  • I cannot agree with the term and conditions of itunes after update ios7?

    I cant agree with the terms and conditions of itunes after update to ios 7,

    had the same issue 52 pages and no button to agree - also the send to email doesnt work either.
    go to Radio on Music app not itunes store and you can agree it there - will appear red in top right hand corner worked for me!!

  • Portable Wireless Server WG-C10 doesn't stream any audio and some video content after updating phone to Android Lollipop 5.x

    The Portable Wireless Server WG-C10 I purchased in 2014 doesn't stream any audio and some video content after updating phone to Android Lollipop 5.x.
    The WG-C10 firmware is the last version which is available and the PWS Manager software is the last version available in Google Play Store.
    There are no updates for the WG-C10 firmware nor PWS Manager software since 2013 or for Android 5.x (Lollipop) and I don't know if the WG-C10 firmware is the problem or if the PWS Manager software is the problem.
    BTW, I am still able to stream this content on my tablet which is on KitKat (4.4.x) so the files are not corrupted.  The only problem is with Lollipop.
    PWS Manager in the Google Play Store says it supports Android 4.0+ which is no longer true.
    The audio file formats which fail to stream are:  mp3 and wav
    The video file formats which fail to stream are:  mp4, avi and 3gp
    JPEG Images appear to work fine, but I haven't tried other formats.
    I purchased the WG-C10 to stream audio and video primarily to my phone and now that this no longer works, the WG-C10 is useless to me.
    Any ideas?

    Hi juicespeare1,
    Welcome to the Sony Community!
    Upon checking your inquiry, the best division to respond to your concern is our Sony Mobile department.
    You can reach them at this site: http://www.sonymobile.com/global-en/support/contact-us/contact-info/.
    If my post answers your question, please mark it as "Accept as Solution"

  • HT4623 I updated my ipad to iOS 6 yesterday and it worked immediately after update.  I left home for about 4 hours and when I returned I was uable to get my ipad to come up. I only have a black screen.  When I press the on off button nothing happens.

    I updated my ipad to iOS 6 yesterday and it worked immediately after updating my ipad worked as it should.  I left and came back in about 4 hours and have a black screen.  When I press the on off button nothing happens.  Help.

    Assuming that the battery isn't empty (and it can take up to 15 minutes of charging before it will respond), then have you tried a reset ? Press and hold both the sleep/on/off and home buttons for about 10 to 15 seconds, after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • IGoogle (and perhaps others) broken after updating to 6.0.2 -- broken for ALL versions of Firefox now.

    Hi folks,
    Note: I've found a way to post images... here they are...
    [http://i1087.photobucket.com/albums/j480/_Melk_/iGoogle_Firefox_broken2.png iGoogle Firefox Broken (same in version 5.x, 6.x & 7.x)]
    [http://i1087.photobucket.com/albums/j480/_Melk_/iGoogle_IE9_Working.png iGoogle Firefox IE9 Working (was like this on FF too before last update)]
    This is a good one so bear with me, I'll try to be as precise as I can.
    I updated FF to 6.0.2 yesterday and since then iGoogle (and perhaps other pages.. not sure on this) does not display correctly anymore.
    Most evident is the fact that the links "Advanced Search" and "Language Tools" shown (usually) on the right side of the search edit box, don't show up anymore.
    Other changes are the graphics which are used by the gadgets. In IE9 & FF before the update, each gadget showed round corners, not anymore in FF after update. Also, if I try to change the theme, the buttons "Add This" don't show up in FF now.
    Now, here's the kicker! I completely removed Firefox from my system, meaning uninstalled it using the remove settings as well. I also deleted my profile folder & the Mozilla Firefox folder after the uninstall. Then I reinstalled version FIVE (5.0) to see if I could revert to the why things were back then, and behold, same problem!! So now, I can't repair my firefox to work properly even if I return to older versions!? wow
    Tried system restore to a few days ago, that didn't fix it.
    Tried version 5.x, 6.x and even the beta 7.x (all from scratch after uninstalling and deleting the profile folder + program files(x86) Mozilla folder) --- still NO FIX! ack! ;)
    Frankly, I'm at my wits end on this one. I usually can repair pretty much anything computer/OS related, but this one has me stumped.
    Thanks in advance for ANY help provided.. much appreciated :)
    /cheers
    P.S. I also tried safe mode (took the broken FF picture in Safe Mode), but it has the same issues. In other words, I'm now officially unable to have ANY version of Firefox display iGoogle correctly anymore (5.x, 6.x, even beta 7.x). Be it bare bone, with or without addons, etc etc. All this caused by updating to 6.0.2 from 6.0.1.
    Note that I've done tons of updates before without any issues. Also been using FF for the last 6+ years I think (been a while ;) )

    Turns out that it's iGoogle Styling that has changed! Not a Firefox bug (although there are bugs in the new iGoogle).
    The changes to my homepage (iGoogle) happened just as I was updating 6.0.2. So this led me to believe it was a Firefox bug, and since IE9 still shows the OLD style on iGoogle, it reinforced this belief.
    After reading up on it on the Google forums, and chatting with a great tech support on Mozilla tech, I realized it wasn't Firefox. So you can dismiss this as a human error ;)
    /cheers

  • Finder not able to view folders and files on EHD after updating to OS X 10.9.4

    I can see still see 'Hitachi' in the 'Devices' Sidebar, but I am not able to view folders and files on this Hitachi XL2000 2TB FAT32 Hard Drive (EHD) that is USB connected to the iMac below.
    Late 2013 Apple iMac (27-inch Display 2560 x 1440), 3.4GHz Quad-core Intel Core i5, Turbo Boost up to 3.8GHz, 8GB 1600MHz DDR3 SDRAM - 2X4GB, 512GB Flash Storage, NVIDIA GeForce GTX 775M 2GB GDDR5, Magic Trackpad, Apple Wireless Keyboard and OS X 10.9.4 Mavericks
    All was fine until I updated from OS X 10.9.3 to 10.9.4 earlier this week, so now when I double-click on 'Hitachi' it just loads and loads with nothing happening and never displays the folder and file contents of the EHD.
    Also, confirmed that Hitachi EHD has been removed from Spotlight indexing per System Preferences > Privacy > + > Hitachi and it was so this does not seem to be an indexing issue.
    I have used OnyX and Apple Disk Utilities unsuccessfully to try and fix this problem.
    Interestingly, Backblaze online backup still sees the EHD and connecting this EHD to a Win 8.1 PC also sees the EHD.
    Further, I ran the commands below in 'Terminal' to make sure the drive was visible and got the following results which shows that the EHD is not hidden.
    iMac:Applications john$ chflags nohidden /Volumes/Hitachi/
    iMac:Applications john$ GetFileInfo /Volumes/Hitachi/
    directory: "/Volumes/HITACHI"
    attributes: avbstclinmedz
    modified: 07/10/2014 23:26:44
    Finally, I installed XtraFinder and am still not able to see the contents of the EHD, but when I installed OmniDiskSweeper I can navigate the EHD folder tree with no problems and can see the contents of the EHD, but when I try and open up a file it opens Finder which loads and loads and nothing happens.

    Apple Support was quite helpful, but in the end I will wait to do a clean install of OS X Yosemite which is due in the Fall and not try and fix OS X 10.9.4 Mavericks.
    It turns out that I run backups on my '/Users/john/Library' and the size of this folder before the 10.9.4 update was 1.07 GB and after the update it is 806.9 MB which is baffling, but in the end all of these problems should be resolved with a clean install of OS X Yosemite.
    One lesson learned for the future is that I will wait on installing an update until it has been in the wild for awhile as a quick OS X Mavericks Finder Problem search and similar searches show there could be an issue.

  • Firefox stopped working and won't install after I uninstall and reinstall.

    Firefox stopped working one day. It would not load anything. I followed the directions and completely uninstalled and then reinstalled Firefox. It goes through the process and then says Firefox will load momentarily. It never does. Also, what do you have against hiring people to answer questions in person?

    It is possible that your security software (firewall, anti-virus) blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
    Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
    See:
    *https://support.mozilla.org/kb/Server+not+found
    *https://support.mozilla.org/kb/Firewalls
    *https://support.mozilla.org/kb/fix-problems-connecting-websites-after-updating
    *http://kb.mozillazine.org/Browser_will_not_start_up

  • Updating and installing apps won't install after update to R29

    Hi all,
    You can't update an existing app in Adobe DPS App Builder and install it.
    You need to create a new app each time. This is to time consuming.
    Anyone else noticed this?
    regards
    Mario

    We think we’ve located the problem. It could be the actual signing when you download the ipa frop DPS Builder.
    we’ve unpacked the ipa
    Removed the CodeSignatures folder
    And signed it again manually using Terminal
    Zipped it all back to an ipa
    And we successfully installed the ipa using iTunes.
    So therefore, we think this might be a signing issue in the Adobe DPS App Builder

  • What to do when your I pad refuses to open after update?

    My I pad refuses to ope after recent update! what do i do? it's 5 months old.

    Try reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.

  • HT2827 i just updated my software for the apple tv and the light is flashing and it wont restart after update  thoughts?

    i tried to update my software for apple tv and it will not restart after update.  flashing lights

    Welcome to the Apple Community.
    If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
    Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
    Connect the micro USB cable to the Apple TV and to your computer.
    Reconnect the power cable (only for Apple TV 3)
    Open iTunes.
    Select your Apple TV in the Devices list, and then click Restore.
    (You may already have a micro USB cable if you have a camera or other digital device)

Maybe you are looking for