HP CP1520 Series driver's RAM configuration

Hi there!
I got myself a HP LaserJet CP1525n color and a RAM upgrade to this printer. In the "HP LaserJet CP1520 Series" driver dialouge, one can choose 128, 192 or 256 MB RAM but not my configuration (which is 384MB).
What am I missing?
Thanks in advance
Kind regards
Steffen

I would suggest that the values shown are "what size is the RAM you are adding", rather than "what is the total size of RAM in the printer". So if the printer already has 128MB as standard and you add 256MB, then you get the 384MB you mention.
Also, I think that regardless of what value you select, you will be able to print. The amount of RAM you set probably has no or a small amount of constraints that it sets for printing. This can be determined by checking the PPD for the printer in a text editor.

Similar Messages

Upgrade MacBook - Hard Drive and RAM

I want to upgrade my daughter's early 2008 white MacBook - both internal drive and RAM. I know how to install both and have done so before. I have purchased the internal drive, the RAM and a large external drive for Time Machine backups now and for the future. I also want to install Lion. I'm not sure of the sequence... Here is what I propose:
1) format the new external hard drive and then back up the current internal drive using Time Machine.
2) install the new RAM.
3) install the new internal drive.
4) boot up using Snow Leopard DVD. Install OS 10.6
5) upgrade to 10.6.8
6) install Lion.
7) import all of her applications, files, etc. from the Time Machine backup.
8) done?
Is this correct - will all work?
9) back up the new internal drive using Time Machine.
Will step #9 work when I select "Back Up Now" from the Time Machine?
10) If yes, is her itunes account, etc. ready to use? Can she sync iphone as before?
Thanks.

I can make this easier for you:
1) Download and install SuperDuper.
2) Using SuperDuper, make a clone of the current internal drive to the large external.
3) Test the clone by booting to the external drive
4) If good, install the new internal drive.
5) Boot from external, and use SuperDuper in reverse (clone back to new internal).
6) When done, boot the mac normally. Upgrade to Lion, and all should be good.

Hard drive and Ram switch

Can I add the hard drive and ram of a dual usb ibook to a clamshell ibook?

The hard drive will work.
The RAM may work but some PC133 RAM will not work at 66 MHz (the bus speed of the clamshell).

HI, I HAVE A MacBook Pro 2.3GHz dual-core Intel i5 AND I WAN'T TO UPGRADE THE HARD DRIVE UP TO 750GB AND ALSO THE RAM MEMORY TO 8GB. WHAT SPECIFIC MODEL OF HARD DRIVE AND RAM MEMORY SHOULD I BUY??? THANKS

HI, I HAVE A MacBook Pro 2.3GHz dual-core Intel i5 AND I WAN'T TO UPGRADE THE HARD DRIVE UP TO 750GB AND ALSO THE RAM MEMORY TO 8GB. WHAT SPECIFIC MODEL OF HARD DRIVE AND RAM MEMORY SHOULD I BUY??? THANKS

No need to type in all caps - we HEAR you!
I would take a look at the internal drives offered by both Crucial (click the link "Internal Hard Drives Now Available") and OWC. I would stay away from Western Digital drives as they seem to have problems on a number of Mac models.
You can also shop for RAM at Crucial and OWC - just select the System Scanner tab at the Crucial website to find out which memory is right for your machine.
Good luck,
Clinton

Does it void my warranty to upgrade the hard drive and ram in a MacBook?

Recently a new store in my local mall called Peachmac opened. They do repairs and upgrades. I went there to see about a hard drive and RAM upgrade. They told me if I do it myself, it voids the warranty. I have about 8 months of Apple care left on my Mac and don't want to loose it. My real question is does it void your warranty even though the instruction booklet specifically tells you how to do it? The reason I'm wondering this is because they want $69 an hour plus money for parts. They quoted around $125-$150 (for a 500GB HD and 4GB of RAM). Is this an ok deal? Or should I go for an SSD? I saw Crucial was doing a bundle for a 128GB SSD and 4GB of RAM at my local CompUSA. Which one is a better deal? Thanks!

If you replace the memory, it doesn't void your warranty, but the warranty will be voided if you replace the hard drive

Questions regarding Hard Drive and RAM upgrade

I just purchased a Macbook white (Late 2006 model) for my son off ebay. I know next to nothing about hard drives and RAM.
I only paid $400 for this thing so I'm willing to put some extra cash into it.
What is the maximum hard drive I can put in this thing? Also, does the size of the hard drive depend on the amount of RAM I can put in it?
Like I said, I dont know very much about this stuff at all. Could someone please give me specific examples of the size hard drive & RAM I can put in.
Thank you.

Replacing the Hard Drive and RAM is very easy. Apple has a PDF file with instructions for replacing a hard drive and RAM. You'll need a #0 phillips screwdriver for the "L" bracket and a Torx 6 driver for the caddy screws.
http://manuals.info.apple.com/en/MacBook13inch_HardDriveDIY.pdf
http://manuals.info.apple.com/enUS/MacBook_13inch_MemoryDIY.pdf

How much ram can I add to my late 2008 MacBook Pro? I run Mavericks and just got a new inexpensive hard drive. RAM is not very expensive so Thought I would bump it up from the current 2MB of 1067 Mhz DDr3

How much ram can I add to my late 2008 MacBook Pro? I run Mavericks and just got a new inexpensive hard drive. RAM is not very expensive so Thought I would bump it up from the current 2MB of 1067 Mhz DDr3

Maximum Memory
8.0 GB (Actual) 4.0 GB (Apple)
Memory Slots
2 - 204-pin PC3-8500 (1066 MHz) DDR3 SO-DIMM

[svn:bz-trunk] 17010: Bug: Watson #2652870 - use a property file to drive the custom configuration tokens as opposed to setting it in the command line

Revision: 17010
Revision: 17010
Author:   [email protected]
Date:     2010-07-22 02:52:41 -0700 (Thu, 22 Jul 2010)
Log Message:
Bug: Watson #2652870 - use a property file to drive the custom configuration tokens as opposed to setting it in the command line
QA: Yes
Doc: Yes - in custom tokens section, talk about the new token.file option
Checkintests: Pass
Details: Changed TokenReplacer to look for a token.file JVM option. If it's specified (eg. -Dtoken.file=/User/matamel/Desktop/token.properties), then TokenReplacer looks for a properties file where token name and values are specified. This allows someone to specify a file for custom tokens. Custom tokens can still be specified as straight JVM option and in case where a token is defined both as a JVM option and in a token properties file, JVM option takes precedence.
Modified Paths:
    blazeds/trunk/modules/common/src/flex/messaging/config/TokenReplacer.java

Remember that Arch Arm is a different distribution, but we try to bend the rules and provide limited support for them. This may or may not be unique to Arch Arm, so you might try asking on their forums as well.

I need hp laserjet 1000 series driver for win 8 64 bit

i need hp laserjet 1000 series driver for win 8 64 bit
[Personal Information Removed]

Hi,
The printer is not supported on Windows 8 or Windows 8.1, a drevice is not available for the OS:
http://h20564.www2.hp.com/hpsc/doc/public/display?docLocale=en_US&docId=emr_na-c03450061
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Best RAM configuration for Macbook (mid 2007)

Hi, I have a Macbook (mid 2007) with 1 GB ram and I would like to upgrade. Currently I have 2x512MB, so both of my memory slots are taken. Is it a good idea to have one 512MB card and a 2GB card in the other slot? Otherwise, what is the best RAM configuration for a mid 2007 macbook?
I am also looking into purchasing this memory card for my macbook, is this a good choice?
http://www.amazon.com/Crucial-2x1GB-200-Pin-667Mhz-SODIMM/dp/B000FQ2JLW/ref=sr_1 _3?ie=UTF8&qid=1307335802&sr=8-3
Any advice would be very much appreciated!

Kappy wrote:
In these early models, Ronda, the benefit is very marginal.
Yes, I read the figure 128 in regards to the benefit. Something about interleaving, maybe?
In doing a Google search for that article I saw, I found this:
http://www.mac-forums.com/forums/apple-notebooks/99215-4gb-ram-my-macbook.html
the maximum amount of RAM your laptop can take is 3.3GB. So while you can physically insert 4GB of RAM, OS X will only be able to see 3.3GB of it.
But I don't know how knowledgeable that poster is who says it can utilize 3.3 GB. I do know that the full 4 GB shows up in the System Profiler on my MacBook Core 2 Duo 2.16 GHz.

Replacing Hard Driver and RAM

Is it okay to replace the Internal Hard Drive and RAM at the same time? Also, once I replace the hardware how do I restore my last Time Capsule Backup to the new hard drive?

Hello Jason Castellani -Usually best to do one major change at a time in case something goes wrong. That said I can see where you are going here once you got your MBP apart. If you are a gambling man go for both, esp if you have done the procedures before and comfortable with the operation.
See this knowledge base article for your migration question.
http://support.apple.com/kb/HT1177
Hope this helps
Message was edited by: leroydouglas

The driver is not configured for integrated authentication

my code is :
String connectionUrl = "jdbc:sqlserver://169.254.35.45:1486;" +
"databaseName=ipec;"+"integratedSecurity=true";
Connection con = null;
Statement stmt = null;
try
// Establish the connection to the principal server.
Class.forName("com.microsoft.sqlserver.jdbc.SQLServerDriver");
System.out.println("driver loaded");
con = DriverManager.getConnection(conne ctionUrl);
System.out.println("Connected to the principal server.");
but this throws an SQL exception that : Driver is not configured for integrated authentication.
I've placed the sqljdbc_auth.dll in
catalina_root/common/lib where the driver jar file is placed....
but its still givin the same error............
replies are welcomed.............
thank you,
shibhs

shibhs wrote:
but this throws an SQL exception that : Driver is not configured for integrated authentication.
I've placed the sqljdbc_auth.dll in
catalina_root/common/lib where the driver jar file is placed....
but its still givin the same error...........I know this is an old message but I have just had the same problem and it seemed to mean that the driver couldn't find the auth dll. When I put in the windows\system32 directory, the integrated authentication worked fine.
Rgrds
Peter
Edited by: P_Tootill on Jul 3, 2008 3:26 AM

Mac Pro 8-core RAM Configuration question

I know there is a lot of questions about Ram fro Mac Pro on this site but I got a brand new Mac Pro 8-Core today, didn't buy RAM from Apple because of the obvious reason, 1GB (2x512mb) is what I have right now. I am interested in upgrading to 8GB...SO... my question is, What is the best RAM configuration for my Mac Pro? Read the list below. Keep in mind that I am a web/graphic designer so Photoshop is one of my main tools along with Aperture, DreamWeaver, Flash, Final Cut, Illustrator, etc...
My options:
2x4GB
4x2GB or...
8x1GB ???
Please advise. Thanks in advance.

2GB X 4 is best due to the combination of benefits of performance, cost, power consumption, thermal profile.
Performance: groupings of four FB-DIMM allow 256 Bit memory access
Cost: 2GB FB-DIMM are less expensive and more generally available than 4GB
Power consumption: 4 FB-DIMM use 1/2 the power of 8
Thermal Profile: fewer FB-DIMM generate less heat and allow more airflow

Oracle 11g driver to be configured to weblogic9.2

Hi All,
I need oracle 11g driver to be configured to weblogic9.2...
Surfing for this found we need to add ojdbc5_g.jar; but no luck.
Can u advise here if u have any idea?
Thanks in advance.

sourav wrote:
Hi ,
I am using windows server 2003 and oracle 11g R1 .
There is an old dump file taken using oracle export utility whch I need to import in oracle 10g R2 .
Command I am using in 10g for doing this is
imp tkcsowner/tkcsowner@wfcdbtst file=D:\Backups\Hold_Backups\wfcdbtst_export.dmp log=D:\Backups\Hold_Backups\wfcdbtst_export.log fromuser=tkcsowner touser=tkcsowner statistics=none
But , it is throwing me the below error ..
IMP-00010: not a valid export file, header failed verification
IMP-00000: Import terminated unsuccessfully
If I use the same dump file in 11g , it imports fine .
Can , someone tell me if it is not possible to import an 11g dumpfile to 10g , if possible then please lete me know the steps . Thanksis the export taken using exp or expdp?

Register information on X series driver for encoder

Hi All:
I am working on the X series driver development by using MHDDK. After comparing M series and X series I found that theere is a Gi_Save_Trace bit in register Gi_Command_Register in M series. When it is set, the register goes into the latched mode after the next clock edge to assure valid data was latched. However, I can't find equivalent register bit in all X series counter registers.
Can anyone tell me what is the equivalent register bit for same function that Gi_Save_Trace does?
Thanks,
Larry

Hi PedroMunoz,
Actually, I wanted to post it at DDK forum. I don't know why it is shown here. I may need to do it again.
Thanks,
Larry

HP CP1520 Series driver's RAM configuration

Similar Messages

Maybe you are looking for