HP CQ45:harddisk failure and recovery disk won't work

hi, guys!
My HP CQ45 harddisk broke down and cannot be recognized by the system, I even coundn't get into the interface of bios. I put in a new harddisk and intended to recovery the system and just found one of the disks of recovery won't work. It said the disk was not finished. Oh,Jesus. What can I do? Where can I get a copy of the system？
Now I live in Vancouver and can't find local HP website or email. No customs service n only office here?

Call 1-800-474-6836
Or find your support page by using link at top of this page titled "Support & Drivers". Use your full Model number or Product number as listed on the Service Tag attached to bottom of laptop as input. On the Software & Drivers page there should be a link to order Recovery Disks. If you need more help, please post full Model number or Product number.
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Similar Messages

I got a new hard drive and my recovery disk won't work

I need help with my laptop satellite C650D model no. PSC0YC-02V026
I had to change my hdd and my recovery disk won't work.
When i run the disk i get an error saying that some files can't be read from file or disk.
if i click on the ignore button, i get the same message with a different file.
BOOT64.WIM
BCD
BOOT.SDI
ETFSBOOT
and at the end i get another error message:
Restore Wizard: initrecarea.exe - Application Error
The instruction 0x7656FF26 level refers to the address
0x01D70000 memory. The required data was not placed
memory because of an I / O 0xC000009C standard error.
Error 09-0000-0000
I even try with an windows 7 iso but when it start, i'm being asked for the cd/dvd driver, i download the driver but that didn't work either.

Satellite C650D-02V (PSC0YC-02V026)
When i run the disk i get an error saying that some files can't be read from file or disk..
You can obtain new recovery discs for that Canadian model from Toshiba by calling 800-663-0378.
-Jerry

Recovery partition and Recovery disk doesn't work

I have HP Pavilion dv6000 Windows Vista Home Premium with Recovery Partition at drive D:\. Here is my problem. I want to use the System Recovery to put my PC to its default setting, I have use Recovery Manager, but System Recovery does not work. I have also use a recovery disk, but nothing works. Using the Recovery disk, while the recovery is in process formatting the windows partition, and the process reaches 33%, a windows error pop-out (Error: ox4001100200001005). I need help because my laptop is unstable and I cannot work.
Yours truely,
colorlime

Enter BIOS setup by tapping/holding the F10 key immediately after powering on the laptop.Use Diagnostics to test your hdd.
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Windows Vista Home Premium Recovery Disks won't work

Have original disks for this Toshiba A215. The hard drive failed so put in new hard drive. Got the missing boot manager message. so a tecn person used a cd and reformated the new hard drive. Still wouldn't run the recovery disks to install to factory defaults. the Windows Vista sticker still on the computer with the activation code. So borrowed an install disk from a friend, but won't activate. Says it's not a valid activation code. and still won't recognize my recovery disks. starts to run the recovery program then gives message - cannot enumerate. What does it want to enumerate??

cannot enumerate.
Try resetting the BIOS from AHCI mode to IDE or Compatibility or whatever you find there.
Most likely the trouble is caused by a hard disk with advanced-format technology. After restoring, there will be more to do.
Which Satellite A215? Always tell us that. There is a label on the bottom.
-Jerry

TS4148 Hello I have a new iphone5 and I did the new update last night and now i'm getting SIM Failure and my pnone won't work unless I turn it off and on again. I never had this probelm before. Please advise.

My phone is saying SIM Failure after I did update last night.

Most likely you have Office 2004 which are PPC-only applications and will not work in Lion. Upgrade to Office 2011. Other alternatives are:
Apple's iWork suite (Pages, Numbers, and Keynote.)
Open Office (Office 2007-like suite compatible with OS X.)
NeoOffice (similar to Open Office.)
LibreOffice (a new direction for the Open Office suite.)

Reinstalling Lightroom after harddisk failure and new harddisk

Hi I have faced a harddisk crash and got a new 1 terabyte harddisk.
Now I am installing the programs again but when I put the disk into the slot it does accept it.
What can I do?
Pls help
rgds
Niels

Hi Adobe Photoshop Lightroom 5 and Elements 12
Den 30/11/2014 kl. 20.25 skrev John Waller <[email protected]>:
Reinstalling Lightroom after harddisk failure and new harddisk
created by John Waller <https://forums.adobe.com/people/John+Waller> in Adobe Creative Cloud - View the full discussion <https://forums.adobe.com/message/6973190#6973190>
when I put the disk into the slot it does accept it.
Which Adobe software are you trying to re-install?
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/6973190#6973190 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/6973190#6973190
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Adobe Creative Cloud by email <mailto:[email protected].com> or at Adobe Community <https://forums.adobe.com/choose-container.jspa?contentType=1&containerType=14&container=46 70>
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624 <https://forums.adobe.com/thread/1516624>.
Venlige hilsener
Niels Brandt

Application Restart and Recovery APIs doesn't work for windows services

I am using the Application Restart and Recovery mechanism (provided in Windows API Code Pack for Microsoft.NET Framework) to collect some information (i.e. stack information when there's an unhandledexception) before my windows service crash down.
It works well for windows form applications, but the callback method wouldn't be called if the host is a windows service.
I have checked the article: https://msdn.microsoft.com/zh-cn/subscriptions/downloads/cc303708
But it doesn't specify clearly whether it works for a windows service. It seems that the recovery will only be activated when the user interacts with the error dialog of Windows Error Reporting (clicking "close" on the dialog, for example).
So I am wondering is my guess right that the Application Restart and Recovery mechanism doesn't work for windows services. Or is there a better way to meet my requirement?

I would suggest trying ARR if that's what you want to use. The restart portion won't work, but it doesn't need to as if you fail out of your service, the Windows service controller will handle recovery (up to and including restarting your service).
You configure those recovery actions either through code or one of the built in administrative tools for services such as services.msc.
DebugDiag/ADplus and similar tools ultimately do use built-in APIs; you don't need to add anything external to collect debugging information. You do however have to write a good deal of code to do somethings. It's pretty simple to use the unmanaged
function that I pointed out before and
MiniDumpWriteDump to write a minidump when you hit an unexpected error(the dbghelp.dll that comes installed with Windows has it so you don't need anything additional installed). You can even write a basic debugger that literally debugs a process using
only kernel32 functions (see
https://msdn.microsoft.com/en-us/library/windows/desktop/ms679301(v=vs.85).aspx if you're interested).
WinSDK Support Team Blog: http://blogs.msdn.com/b/winsdk/

HT203164 My newly installed burner works fine from i-tunes, except the burned disk won't work in my car CD player. The old burner's disks work just fine in the car. Please help.

My newly installed burner works fine from i-tunes, except the burned disk won't work in my car CD player. The old burner's work just fine in the car. Please help.

Using my new G5 I have the same problem, which I did not know using my old G4 with an external LaCie burner. The CD-Changer in my car is not able to read audio-cds, also my cd-player in my home hifi-system. The only way to play these audio-cds is (strange...) to put them directly in the main tuner of my car (usually used for the navigation cd), not using the Changer.
Maybe the problem really depends on the quality of the CD-Rs. I have used CD-Rs from Sony (it´s a brand, I think?) and will try Verbatim.
Regards, Horst

My ipod touch has an "activation required" error and the slider won`t work

I have an itouch that is only 2.5yrs old and only gets occassional use. A week ago the slider wouldn't work; power switch didn't work; I reset and then tried (unsuccessfully) to restore to factory settings through itunes but encountered an error. At that point it appeared to be restored and I had use of original feature (clock, settings, etc) but I could not connect to WiFi and when I tried to connect to itunes again it did not recognize my device and now my Windows does not recognize my device. It tried to reset again but now I get an "activation required" error and the slider won`t work again.
I have read of other with the same problem but found no solution
Any help is greatly appreciated,
Thanks

Next try thge remaining items of
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

I've just updated my iPhone to the new iPhone OS and now it won't work and iTunes won't recognise that it's there. I've uninstalled iTunes and reinstalled twice and it's not working. Please help.

I've just updated my iPhone to the new iPhone OS and now it won't work and iTunes won't recognise that it's there. I've uninstalled iTunes and reinstalled twice and it's not working. Please help.

I have not had wifi since November when I upgraded to the newest IOS version. I called the Apple help line and they told me some things to do and I tried them all and they worked for a few hours and then wifi shut off again. I kept doing what they told me and it worked for a couple more days and then I could never turn it on again. My blue tooth doesn't work either. I had to actually increase my data usage with AT&T becuase of this. When I did that in December I went to the Apple store and was told that it is a hardware issue and since my phone is out of warranty I would have to pay for a new phone because they could not fix the issue. My upgrade isn't up until June 2014 so not only do I have to wait for the upgrade and I am not paying for a new phone but I have to pay $10 plus extra a month on my cell phone bill because I was going over on my Data!!! I have been beyond upset about this and Apple is not doing anything about this nor did they offer up some way to resolve the issue because obviously it is not just some rare incident if several people are having this issue. Who knows how many people out there have had this issue and have not said anything about it. Now there is a newer update that I can't do because it requires wifi in order to download.
June can not get here fast enough and I may not go back to Iphone after dealing with this for so long with no help from Apple.

I am having a big problem. I am not getting notifications from snapchat and only snapchat. I've made sure every notification setting was on and it just won't work. I have also restored my phone and deleted the app and re-downloaded it multiple times. Help

I am having a big problem. I am not getting notifications from snapchat and only snapchat. I've made sure every notification setting was on and it just won't work. I have also restored my phone and deleted the app and re-downloaded it multiple times. It just wont give me my notifications. Help please.

Go to Settings > Privacy > Location Services.
Turn off SnapChat.
Go to Settings > Notification Center
Turn off SnapChat.
Restart the device.
Go to Settings > Privacy > Location Services.
Turn on SnapChat.
Go to Settings > Notification Center
Turn on SnapChat.
Test the issue.

My game center won't load and shows up blank when I try to open it. I've already tried to close all the apps and restart it and it still won't work. Is their anyway to fix it without restoring it??

My game center won't load and shows up blank when I try to open it. I've already closed all of my apps and restarted it and it still won't work. Is their anyway to fix it without restoring it and starting over??

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- sign out and the sign back into Game Center
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.

My microsoft word and excel programs won't work and files won't open.

After an automatic HP update, my Microsoft Word and Excel programs won't work and my files won't open. What caused this and what can I do to fix the problem without losing my files? I have files that are part of my work and I HAVE to have them ASAP. Please help.
Thanks in advance.

Hi
Please find the steps to resolve your issue.
Open Installed Updates by clicking the Start button , clicking Control Panel, clicking Programs, and then, under Programs and Features, clicking View installed updates.
Click the update that you want to remove, and then click Uninstall. If you are prompted for an administrator password or confirmation, type the password or provide confirmation.
Or Try this step
If this does not resolve your issue then you can try a System restore to the date where unit was working fine steps provided below for you.
Start in search box type System Restore then click on it then select the Date where unit was working fine.
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

TS3212 when installing iTunes on my new laptop a message box appears saying some sort of error has occured and i have to uninstall it then reinstall it again and it still won't work what should i do?

when installing iTunes on my new laptop a message box appears saying some sort of error has occured and i have to uninstall it then reinstall it again and it still won't work what should i do?

Let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you? If so, does iTunes launch properly now?
If instead you get an error message during the install, let us know what it says. (Precise text, please.)

I tried to update my 4s and now it won't work. Is there anything I can do? It's only 6 months old..

I tried to update my 4s and now it won't work. Is there anything I can do? It's only 6 months old..

Yes, connect to your computer with the latest version of iTunes installed and restore it. If it doesn't show up in iTunes when you connect it see: http://support.apple.com/kb/HT1808

HP CQ45:harddisk failure and recovery disk won't work

Similar Messages

Maybe you are looking for