HP DesignJet 1050plus and HP OfficeJet 7000 wide format do not network plot/print with windows 7 64b

It is impossible to plot/print via network with HP DesignJet 1050plus and HP Officejet 7000 wide format. I use windows 7 64-bit. Please help. Thank you for your time.

This forum is focused on consumer level products.  For the Designjet you may have better results posting in the HP Designjet forum here.
Bob Headrick,  HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Similar Messages

  • Officejet 7000 Wide Format 809a

    How do I get a replacement external power supply for the HP Officejet 7000 Wide Format 809a printer. I have followed the HP on line video to do a reset and check on the power supply and believe that the ext'l power supply is dead. Printer was last seen to be working as expected.  Any Clues - I've got nothing 

    Hi,
    Probably you only need the following part:
    You can buy from:
       http://www.amazon.com/HP-AC-Power-Adapter-0957-2271/dp/B004ZVQ3MO
    Or use part # check other online stores incuding eBay>
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Officejet 7000 Wide Format printing birds

    Hello my new HP friends.
    I have an Officejet 7000 wide format printer, connected to a jetdirect box to print via NDPS. The people in the office are complaining that the printer is printing out 'little birds'. These are of course the birds on the alignment pages. Apparently it prints 2 of these per day.
    Why is the printer doing this every day? The pigeons are starting to mount up.
    Thanks,
    Phil

    Hello MerlotLady,
    The lines are indeed clearly visable and look like they are caused by the inkt not bleeding very well through the paper. In this case I would recommend using another paper. I checked the HP website for you and HP recommends using advanced paper. So any kind of HP Advanced Paper will do, either glossy or high gloss as long as it is from the HP Advanced line. A copy of the recomendation below. If this will not solved the problem, best thing to do is contacting your local HP support. Let me know if it helps.
    "Advanced photo paper
    Best for printing with HP 02, 38, 60, 110, 564, 920, or 940 inks; you get vivid, instantly dry, smudge- and water-resistant photos"
    Say "Thanks" by clicking the Kudos Star in the post that helped you.
    Although I work for HP my posts and replies are my own
    Please mark the post that solves your problem as "Accepted Solution"

  • OfficeJet 7000 Wide Format Printer

    I would like to buy the OfficeJet 7000 Wide Format printer if it meets my needs.
    I want to be able to print addresses and some small graphics onto 9X12 catalog envelopes so as to not need labels.  Does anyone know if this would work?
    Thank you!

    Hi AndersT,
    Thank you for visiting the HP Support Forums and Welcome. I have read your thread on your HP Officejet 7000 Wide Format Printer and not working with Windows 8. Here is a link to the HP Print and Scan Doctor. The HP Print and Scan Doctor will run a check on your system and download the appropriate software for you version of Windows. It will help you connect the printer and the computer to the same network.
    Hope this is helpful.
    Thanks.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • HP Officejet 7000 Wide Format Printer - E809a - losing connection through router

    We have an issue getting sustained response from our HP Officejet 7000 Wide Format Printer - E809a which is linked to the wireless network by ethernet cable to a Netgear router.  We have tried stripping out the driver software & uninstalling the printer from the register, then re-installing through latest downloads from the HP site.  This works, especially if the device is set as the default printer, but within an hour the printer greys out in the device register and the default automatically resets to another printer.  Does anyone know why this printer is losing its connection?

    Hi , I see by your post that the default printer keeps changing. I would be happy to help you.
    Uncheck the SMTP setting in the print drivers, to see if that will help.From Devices and Printers, right click on the printer and left click on Printer Properties, click on the Ports tab, select Configure Port, uncheck SMTP and the printer should show online again. If the issue persists, please take a look at this document. HP Single-Function and Multifunction Printers - 'Printer is offline' Message Displays on the Computer and the Printer Does Not Print: Windows 7. If you appreciate my efforts, please click the 'Thumbs up' button below. Thank You.
      

  • HP Officejet 7000 Wide Format Printer Series Error "ALL LIGHTS ARE BLINKING?"

    What are the causes of my printer HP Officejet 7000 Wide Format had this error "all lights blinking"? Which part of my printer have a problem? please help!! thankzzzz......

    Hello ryigo24,
    Welcome to the HP Forums.
    I see that you are having an issue with all the lights blinking on the printer.
    Please click on the following link that deals with Blinking Lights.
    If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
    Thanks for your time.
    Cheers,   
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • Blink the catridge led one by one in officejet 7000 wide format

    When send the test page the printer become offline and the led of catridge is blink one by one.Please suggest to how to resolve it.

    Hello , I may be able to help you with the blinking lights on your Officejet 7000 wide format printer. Using the Blinking Lights on the HP Officejet 7000 (E809a) document I found out that the light sequence you described is related to the printhead installation. To make it easier for I have copied the suggested steps here for you; Solution One: Check the printhead installation
    Use the following steps to make sure the printhead is correctly installed.
    Step one: Remove the printheadMake sure that the product is on.Lift the top cover. The carriage moves to the center of the product.
    Figure : Open the top cover
    Wait until the carriage is idle and silent.Disconnect the power cord from the back of the product.Remove the cartridges. Press the tab on each cartridge, and then remove each cartridge from its slot.
     NOTE:Do not leave the cartridges outside the product longer than 30 minutes. Doing so can result in damage to both the product and the cartridges.Lift the latch handle on the carriage until it stops.
    Figure : Lift the latch handle
    Lift the printhead straight up to remove it.
    Figure : Remove the printhead
    Step two: Reinstall the printhead
    Reinsert the printhead. Make sure the green and purple blocks on the sides of the printhead align with the corresponding color blocks on the carriage; green to green, purple to purple.
    Figure : Insert the printhead
    Carefully lower the latch handle before reinserting the cartridges.
     NOTE:Leaving the latch handle raised can result in incorrectly seated cartridges and printing issues. The latch must remain down to correctly install the cartridges.Figure : Lower the latch handle
    Reinstall the cartridges. Using the colored shape icons for help, slide the cartridges into their appropriate slots until they snap into place and are seated firmly in the slot.Close the top cover.Try printing again. You could also try the steps in 'Printhead Problem' or 'Printhead Appears to be Missing or Damaged' Displays for HP Officejet 7000 Wide Format Printers.  If the issue continues, I would Contact HP Support for further assistance. Fill in the model number and the form to receive a case number. You can view all other ways of contacting HP from their list of Support Options.  Please let me know if any of these steps resolved your issue, or if there is anything else I can do to help.    Thanks, 

  • HP Officejet 7500A Wide Format e-All-in-One Printer - E910a

    HP Officejet 7500A Wide Format e-All-in-One Printer - E910 scaner & copy not workser:-MY4C8510F9 

    Hello bondcip ,
    Welcome to the HP Forums.
    I see that you are having an issue when attempting to Print on A3 paper.
    What program are you printing from?  Does this happen with Microsoft word or emails?
    Run the HP Print and Scan Doctor and let me know if it finds any errors and what they are.
    Cheers,  
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • Officejet 7000 wide format

    Please can someone help me -before I get carted off to the funny farm!
    I recently bought a 7000 wide format and as I live in Spain, I had it sent out from Amazon to me.  No problem there - I installed it and started to print.  I was well pleased.....BUT....
    after about 20 pages, I got messy print-outs. I carried out head cleaning, but there were still smudges on the paper.
    So, following the instructions I removed the printhead and found there was ink all over it, so I carefully cleaned it and replaced it.
    Now I keep getting the error message from the toolbox telling me the printhead either isn't compatible or is damaged.
    I have tried to contact HP in Spain where the warranty is registered, but the site won't allow me access, as it says I don't
    have an HP printer.  It says the model number I entered doesn't exist either, so I can't get any information from there.
    If I have inadvertantly damaged the printhead, can I get a new one?  Someone told me that I can, but I just can't find out
    how and where.
    I can't send it back to Amazon because, owing to a shgortage of space,  I binned the original box and packaging - so
    I'm totally stuffed.
    Any help would be really appreciated.
    Thanks
    Lee

    Hi @Ratboy2k 
    I understand you are having some troubles with our Officejet 7000. I would be happy to help you. From your description, it sounds to me like the printer might need to be aligned. Please use the following steps to align the printer and let me know if doing so resolves the issue.
    Load plain white paper in the input tray.
    Open HP Solution Center:
    Windows XP: Click Start, click All Programs, point to HP, and then click HP Solution Center.
    Windows Vista or Windows 7: Click the Windows icon (), click All Programs, point to HP, and then click HP Solution Center.HP Solution Center opens in a separate window.
    Click Settings ().
    Under Print Settings, click Printer Toolbox. The printer Toolbox opens in a new window.
    Click the Device Services tab.
    Click Align the Printheads.
    - Source
    If this does not resolve the issue, please print a Print Quality report so we can determine if the issue is the printer itself or somehow related the driver or program you are printing from. To print a Quality report, use the steps above, but instead of choosing Align printheads, select Print a Print Quality Diagnostic Page, and then click Print Page.
    The report should look like the image below;
    Thanks, I look forward to hearing from you.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • Officejet 7000 Wide Format not printing Black

    Hi THere.  I have a HP Officejet 7000 wide Printing format and it is not printing Black.  The ink levels are showing full.  I have cleaned, 2nd tier clean & Aligned the printer with no affect. 
    I had removed the old cartridge when this happened and it was actually half full, so I also bought a new cartridge and it still prints the same. 
    Any ideas out there?
    Thanks
    Finto

    If the printer is out of warranty one thing that might be worth a shot is soaking the printhead...
    1) Get a pan and put 1/2" of very hot (not boiling) water in the bottom.
    2) Next remove all the ink cartridges, then remove the printhead assembly.
    3) Gently put the printhead nozzles down in the water and let it soak for five minutes.
    4) Remove the printhead and gently dry the electrical contacts.
    5) Put the printhead back in the printer and then reinstall the ink cartridges.
    http://h30434.www3.hp.com/t5/Ink-Toner-Cartridge-Printhead-Issues/HP-6500-Office-jet-E709a-Black-pri...
    Can you please let me know how you get on?
    Thanks, Ciara
    Although I am an HP employee, I am speaking for myself and not for HP.
    Twitter: @Ciara_B_HP

  • HP Officejet 7000 Wide Format printing black AND white lines on photos

    I am having some serious problems with my officejet 7000. I have contacted HP and have went through all the steps required (although all they could do is send me a new head and cartridges to help remedy the problem). This however has failed. Let me give a quick example of my problem. Although these 4 images are different in almost every way, they are printed on the exact same paper lol.
    <img src="http://a4.sphotos.ak.fbcdn.net/hphotos-ak-snc7/298​367_2181658093219_999934383_32331922_448499237_n.j​...">
    The bottom two 4x6 are on HP Premium Plus photo paper.... Not cheap, and being wasted daily, trying to get this thing to print...
    I finally had a break thru when I printed bordered on my 4x6 AND 8x10's.... The printer will work and print flawlessly on a bordered picture... This does not help me when the customers want a borderless picture though. When it is printing a borderless picture, it seems to be rushing through the process, but when it is printing bordered, it takes its time.... any ideas as to how to fix this?
     It is a Windows 7 system. Ive tried wire and wireless printing to rule out communication failures. Which also concluded it is not software related due to reinstalling software for wire and wireless.
    Sorry to rant, just getting fedup with what could be a great printer......
    One more thing... Why cant you print 11x14 on a 13x19 page?!(no option for it  )

    Sorry to hear about the issue you are facing.
    There is an updated print driver for your product which was released:
    http://h10025.www1.hp.com/ewfrf/wc/softwareCategor​y?os=4062&lc=en&cc=us&dlc=en&sw_lang=&product=3883​...
    Check if this newer print driver helps.
    To answer your other query about selecting a different size media vs inputting different size, the printer actually does not allow it to protect it from overspray on the carriage.
    I work for HP.

  • OfficeJet 7000 Wide Format - network install problem

    Hello to all.
    I get a call to install this printer in a small network of three computers. All of them are Windows XP 32bit. Install process is fine till one point. Printer is recognized on the network. Address is given by DHCP server on ADSL router. Install program see it and when I click 'next' I see in dialog box 'printer detected'. Few seconds after that large red 'X' shows on screen. No message, no error number. Nothing. Then I input IP address through web browser. Printer details are shown. Ink level, IP address, MAC address etc. There I changed IP address to static. Went to other two computers and repeat installation proces. Same thing again. After two hours I was crazy. Connected printer to every PC with USB cable. Install it as local and then changed port from USB to IP address. They can print on it through network but there are some other issues. MSI error started when windows started. I belive it shows because of that kind of installation. But rest of the problems are strange. Their CAD software lags. Saving time was 2 to 10 seconds before installation of OJ7000 and now is minute to minute and a half. When I removed software and printer from one PC saving time was again OK. On owners computer HP image software stopped to respond and he can't use scanner as he did before. Also, they have HP ploter, one laser A4 printer, and K8600 printer wich is on repair. Because of that they bought 7000 model. Does anyone knows why I can't setup printer normally as network when it is visible on the network and I can access all features over the web browser? I need info ASAP if it's possible. Local HP office told me to try  HP support chat but they don't have support for that model of printer.
    Thank you in advance.

    Me again. Problem solved!  Small HP tool for installing network printers did the work. Now I just have to find solution for Image Zone software and it's error.
    One note about that HP software. If you can, provide driver file for printer and prepare it before you start setup software. Installation process is faster and very easy.

  • HP Officejet 7110 Wide Format Printer not printing true black on HP Semi Glossy A4 paper

    I recently bought an HP Officejet 7110 Wide Format Printer and I have tried several times to print black on HP Semi Glossy A4 paper C6818A and each time it comes out as an almost dark brown off-black. I have tested it with another HP printer and it printed a perfect dark black from the same file using standard printer settings for plain paper. I have just replaced the printer cartridges supplied with the printer with some new ones and this has not fixed the problem either. If you could suggest any possible solutions I would appreciate it. Thanks

    Hi , I see that you are experiencing issues with the printer printing the black in a dark brown, using HP Semi Glossy A4 paper, you have already changed the cartridges with the same results. I would like to help you with this issue. I have provided a document with some steps to try to see if that will resolve the issue.Fixing Print Quality Problems for the HP Officejet 7110 Wide Format ePrinter Series. Try printing from another application to see if you have the same results. What applications have you tried to print from? Check the print driver settings to make sure the paper type and quality is set properly.Changing Print Settings in Windows 8. Here is another document to troubleshoot the cartridge if it isn't software related.Printer Prints a Blank Page or Does Not Print Black or Color Ink for the HP Officejet 7110 Wide Format ePrinter Series. What operating system are you using? How to Find the Windows Edition and Version on Your Computer. If you need further assistance, just let me know. Have a nice day!
    Thank You.

  • Custom paper size with HP Officejet 7500A Wide Format e-All-in-O​ne Printer

    I am wanting to print on a paper size 12x18.  I do not find a "Custom" paper size on my printer HP Officejet 7500A Wide Format e-All-in-One Printer.  Is there another driver which I can download which would allow me to enter custom paper sizes?

    I am wanting to print on a paper size 12x18.  I do not find a "Custom" paper size on my printer HP Officejet 7500A Wide Format e-All-in-One Printer.  Is there another driver which I can download which would allow me to enter custom paper sizes?

  • Printing Sizes for Office Jet 7000 and Office Jet 7500A Wide Format Printers

    I have the Office Jet 7000 wide Format Printer and the Office Jet 7500 Wide format All In One Printer. Is there any way to customize the size of paper that you want to print Or can you only use the ones in the drop down menu. I do scrapbooking and would like the option to print full bleed 8 x 8 inch papers. I can print full bleed on the 7000, but I do not see an option for custom sizing.

    I have the Office Jet 7000 wide Format Printer and the Office Jet 7500 Wide format All In One Printer. Is there any way to customize the size of paper that you want to print Or can you only use the ones in the drop down menu. I do scrapbooking and would like the option to print full bleed 8 x 8 inch papers. I can print full bleed on the 7000, but I do not see an option for custom sizing.

Maybe you are looking for