HP DesignJet 111 not detected black and cian cartridges.

Hi,
I have a plotter HP DesignJet 111 (CQ533A). The display shows the cian and black cartridges are fault. I change both cartrigdes, I can print two or three times, but fault again. I change the cartridges again and happens again.
The strange thing is the two cian cartridges are not detected by another plotter (DesignJet 110 use the same cian cartridge, but the black is different). Can the plotter flash the chip of the cartridge? Any tips?
Regards
Hola:
Tengo un ploter HP DesignJet 111 (modelo CQ533A). En el display muestra que falta cartucho negro y cian, los cambio. Me deja tirar un par de impresiones, pero al momento me dice de nuevo que no hay cartuchos. Pongo otros dos cartuchos nuevos, funciona un par de veces, pero a las dos o tres impresiones, no me detecta los cartuchos negro y cian.
Lo extraño es que esos dos cartuchos cian (tinta modelo 11) tampoco son detectados en otro ploter (un 110, no puedo probar el negro porque el cartucho no es el mismo); es decir, es como si la máquina flasheara el chip de los cartuchos.
¿Alguna sugerencia?
Saludos

Hello AntonioR, and welcome to the HP Forums.
I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at http://h30499.www3.hp.com/hpeb/ .
I hope this helps!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Similar Messages

My problem is that one of the USB ports and the device does not detect this and inactive but can not find how to reactivate.Help me please! greetings thanks!

Hello good evening, I have a MacBook Pro and my problem is that one of the USB ports and the device does not detect this and inactive but can not find how to reactivate.
Help me please! greetings thanks!

Do you have the Firefox new tab page but the actual sites are missing, or do you have some other page?
If you have some different page, try the quick fix in Fred McD's reply.
If the sites are missing, did you use the Reset feature? That will clear the storage associated with the new tab page. I'm not sure it's possible to recover from that; you probably need to rebuild your page from scratch as you browse.
For possible future reference, here is how to access the hidden setting for the page to display on new tabs:
(1) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
(2) In the search box above the list, type or paste '''newtab''' and pause while the list is filtered
(3) Double-click the '''browser.newtab.url''' preference and enter your preferred page:
* ''Page thumbnails (default)'' => about:newtab
* ''Blank tab'' => about:blank
* ''Built-in Firefox home page'' => about:home
* ''Any other page'' => full URL to the page
Press Ctrl+t to open a new tab and verify that it worked. Fixed?
Some gotchas:
''If Firefox won't let you edit this setting:'' you may have something called SearchProtect on your system.
''If Firefox lets you save your change but ignores it:'' one of your extensions may be overriding it. You can review, disable, and/or remove extensions on the add-ons page:
"3-bar" menu button (or Tools menu) > Add-ons > ''in the left column click'' Extensions
''If the change works during your session, but at the next startup is back to an unwanted page:'' you might have a user.js file in your personal Firefox settings folder (your Firefox profile folder). This article describes how to track down and remove the file: [[How to fix preferences that won't save]].
Any luck?

My mac not detected flashdisk and iphone5

my mac not detected flashdisk and iphone5

You aren't likely to find it here unless you have a specific iBook G4 issue.
Perhaps you need to repartition and reformat your HDD or reformat the Linux partition and reinstall it.

CP1518ni - not printing black and white only

I only print black and recently the magenta cartridge started making sounds as a defective cartridge. Since I only have black cartridges on hand so I replaced it with a black one, but it says that the magenta is in the wrong spot. The overide out is on and I don't know how to override this error. Help please.
http://h30434.www3.hp.com/t5/Printing-Issues-Troubleshooting/CP1518ni-not-printing-black-and-white-only/td-p/1494733

Hi , I read your post and see that the magenta cartridge started making sounds as a defective cartridge, you replaced it with the black cartridge and it was rejected. You are using over ride and still can't print. I would like to help you.
You have to replace the cartridges for the marked cartridges in the printer.Over ride will allow you to continue printing until one of the toners are completely empty & then will have to be replaced to continue printing. Basically this setting is for you to finish the print job. You will have to replace the magenta cartridge in order to resume printing. If you appreciate my efforts, please click the 'Thumbs up' button below. Thank You.

How can I print with the black and white cartridge only?

I am trying to print using the black and white cartridge only because magenta is out of ink but I'm getting the following error message in HP Photosmart C7200 series print dialog:
The printer is out of ink.
The following ink cartridges are empty: Magenta. Replace these ink cartridges to resume printing.
How can I print with the black and white cartridge only?
Mac OSX 10.7.3
HP Photosmart C7280 (7200 series)
This question was solved.
View Solution.

I am absolutely disgusted by this; clearly a scam from HP to make more money by selling extra ink cartridges!! I will make sure to never buy any products from the shoddy rip off merchants at HP ever again!!
You should be ashamed!!

Black and magenta cartridges showing up empty on printer

Okay..my printer is a dinosaur. HP 6180 Photosmart. Last night I moved it as I was cleaning. Today when I went to print, the screen of my laptop said that the black and magenta cartridges were empty. I broke up my day, went out and bought and installed new cartridges. Hewlitt Packard brand cartridges purchased from Staples. I am getting the same message. The ink levels on the printer itself show that the black and magenta are full. If anything, it indicates the blue needs to be replaced soon. Have some photos that need printing...help!
Thank you and God bless.

Hi @mrsdider,
Welcome to the HP Forums!
I understand that on your laptop screen it is showing that the black and magenta cartridges are empty on your HP Photosmart 6180. I am happy to help you with this printing issue!
For further assistance, I will need some additional information:
If you are using a Windows or Mac Operating System, and the version number. To find the exact version, visit this link. Whatsmyos.
If the printer can make a self-test page. Printing the Self-Test Diagnostic Page.
If the power cable is plugged into a surge protector, or directly to the wall outlet. Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector. This applies to Inkjet printers as well.
In the meantime, if you are using Windows, please try the HP Print and Scan Doctor.
Hope to hear from you soon!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

I can not print black and white only documents and I have a full black ink cartridge

I have been an loyal HP customer since the orginal laserjet in the early 90s and then many inkjets from HP after that.
I bought an HP 6600 All in one for the house and have only ever printed in black and white.
For some reason one of the color ink carts is empty after a few months of black and white only printing.   No problem - I only print in black and white - or so I thought.
Nothing I have been able to do (aside from buying a color cart I don't need) is able to tell the printer to not worry about color and only use the black and white cart. Past inkjets from HP didn't have a problem with this.
Please tell me HP didn't do this on purpose and is going to trying and justify the need for me to buy any color carts if I never print in color. HP - if you did and you are going to try and tell me you neeeded to do this for any reason then someone please sign me up for the class action lawsuit if you are an attorney looking for plaintiffs.
However, I am sure I am overlooking some simple setting on the 6600 to move past this annoyance.
Thanks!

Hi Atlanta90210,
We appreciate your brand loyalty, and I'm very sorry for the frustration this has caused.
There is a lot of good information in Cannot Print When One of the HP Ink Cartridges is Empty. It explains how your printer works and how it is designed. Another good resource is posted here.
In the first link I mentioned, there are steps to print with black ink only. I have a similar printer to this at home (with the same print mech), and I have found that the steps to print with black ink only have saved me lots of ink.
There needs to be ink in all the cartridges for this printer to continue printing (after the cartridge's reserve mode is depleted). Once you have replaced the empty cartridges, you can change the print settings to print with only black ink so the printer doesn't use color ink. Until then, there is not a way to bypass this.
I know this is not the answer you were hoping to receive, but I do hope it was helpful.
I'd be happy to help you with any other questions or concerns.
-- ReverseTalk
I work on behalf of HP.
Click the thumbs up + button if I have helped you. Mark Accepted Solution if I solved your inquiry.

My wifi will not detect networks and will not search for other networks when I search for them. Do I need a new iPhone or can I fix it myself?

My wifi is on and when it tries to find a wifi connection, the gray little circle just keeps spinning and will not detect our home wifi. I have tried to search for it and connect to it manually, but it will not search for the network name. I'm hoping I don't need a new phone so please help.

The following may have something that will help: http://support.apple.com/kb/TS1398

IPhoto not detecting iPhone and iPad

I'm using iPhoto 08, ver 7.1.5 (378).
I've been using it with my iPhone 3GS and iPad with no problems until last night.
But starting from this morning, iPhoto would NOT detect any of my devices.
I've tried some tips from the forum -- restarting the system, deleting images from emails in my iPhone, taking picture with my iPhone and reconnect to my Mac. Noe of them worked.
Any help?

Yes you are right, I found image capture app on applications folder, looks like it is an alternative to iPhoto app, however when I connect my devices and open the app I am getting a message "no camera or scanner is connected" so look like whatever is causing the problem for iPhoto also blocks image capture, that app also does not recognise my devices, is there any other way I can transfer photos?? Or what might be the problem for this iPhoto \ image capture issue??
By the way I just realised even iTunes is not detecting my devices now, so I will try a restart after I finish downloading some stuff, meanwhile please let me know if any solutions.
P.S: Is APPLE paying you guys to bombard negative comments?? Almost like once negative comments are detected you guys jump on it, I understand the fanaticism however I am facing a problem that clearly prevents me to upload my photos to my MAC and I am complaing abut it, i believe i have the right to do that as a consumer.
Not sure why you guys take the neative comments and complaints so serious.

With automatic proxy discovery autoupdate dose not detect proxy and fails

When automatic proxy detection is used (for example in corporate network environment) FireFox correctly detects internet proxy server. Autoupdate feature fails as it does not detect the proxy and tries direct internet connection.

Hi,
Sorry for the late response.
Since the issue is complex and difficulty to troublshooting, we discussed for some time corssing the specialty. Here is some direction we may let you know to do further troubleshooting:
capture network trace to confirm whats happening across the wire.
confirm the wpad.dat is the expected.
If you have any difficulty when doing this, we suggest you to contact with IT Pro Support via the link below:
http://technet.microsoft.com/en-us/ms772425?WT.mc_id=SMCfoot_ENUS_TEXT
I think it can help you define the root cause via some deeper tools due to the complicated symptom you have.
I appreciate your understanding and time.
Best Regards,
Annie Gu

Pacman not detecting core and extra repositories

Yesterday, I installed yaourt and pacman-color. After installing these, my pacman doesnot find most of the packages(cups,firefox,zip,unzip,unrar).
Specifically, when I search using pacman "pacman -Ss" I get results only from the community and not from core and extra.
When I search for firefox or the above mentioned packages, I get "error: target not found: firefox"
I checked the pacman.conf file, community and core repos are uncommented only. There is no error in pacman log also. I have uninstalled yaourt and pacman-color for now. But still the issue persists.
I ran the command "pacman -Syyu" but still not detecting the packages.
Not sure this info helps, but the extra.db file in /var/lib/pacman/local has a size of 0 while the other files are not size 0. Please advice

psathiya1987 wrote:I checked the pacman.conf file, community and core repos are uncommented only. There is no error in pacman log also. I have uninstalled yaourt and pacman-color for now. But still the issue persists.
e
It looks like you have extra commented so pacman is being told not to look at it. Out of interest how do you know core isn't working? Have you tried searching for a package in core - eg:
\pacman -Ss coreutils
Can you post your pacman.conf please?

Render background black is not really black and white is not really white

Goodday,
I have problem when i try to render movies from Premiere Pro CS4 in Adobe Media Encoder.
When it is has black background or a white background and i want to render it in Adobe Media Encoder the color shifts a little bit. Black gets really dark grey and white is not white anymore.
I import the composition in Media Encoder and make a WMV from it with all its values to the max. I also tried a few different codecs, but non of them keeps the background black or white.
what can i do to solve the problem?
sincerly,
3Demian

It's possible you have got some "sit-up" on the black. Do you have access to a 'scope? Not the rubbish thing in PrPro. If you have then look at the line timebase in the output and check the position of the 0 level after the back porch (after the line sync period). An overly raised black level (pedestal) in the video period will cause the blacks to look grey. If you are using a Proc Amp anywhere in the output then check the setup.
Similarly, raising the black level can cause clipping on your whites, which can result in the white not looking "white" depending upon how much it's being clipped and the setup of the clipping device threshold.
Just a thought.

Smart connect not detecting connections and phone not detecting headphones

Hi
The smart connect app in my Z2 used to auto launch the profile i set when my Blue tooth ear phones connect and disconnect but not anymore. Force stopping the app does not work. It was working before the lasted android update.
Also my phone has stopped detecting my beats plug in headphones. Again it used to work prior to the software update last month.
Sony if you're reading this please issue a patch soon thanks!

Did you also try to clear data for smart connect?
All we have to decide is what to do with the time that is given to us - J.R.R. Tolkien

HP printer does not prit black and white if one of the color heads are depleted?

I bought a 7110 A3 printer and have had several problems till today. The first was that the printer does not print in A3 format if the system is not in Amrican English. Now I just swap the black cartridge and when I use this printer says that the yellow cartridge is over and it does not print anything even in black or white! The strange thing is that i never print anything in color, only use black ink! I'm almost throwing the printer out the window, i do not know how i got scamed again by HP . I had promised myself never to buy anything from this company anymore!

Hello,
Please see this link, it describes a bit about the issue you are seeing:
http://h30434.www3.hp.com/t5/Ink-Toner-Cartridge-Printhead-Issues/Can-my-printer-print-BLACK-without...
I work for HP.

FBUS-HSE/H1 not detecting 100Mbps and status light blinking green

I had the HSE/H1 connected to my network, but it decided to go crazy on me and drop off the map. I know the IP Address of the unit, but am unable to connect with it anymore. I did a factory reset on the unit, but am unsure if that resets the IP address as well. If that is the case what is the best way to force an IP address on the unit? The status light blinks green at a rather fast rate as well. I can add the ethernet interface board in the interface fonfiguration utility, but can not add the hse/h1 LD since it just sits there and listens for the board forever. I hope it is an easy fix and not a matter of the unit died on me.
Thanks
Kyle

The blinking status LED indicates that the linking device is in standby state. The linking device will be assigned an IP address automatically through DHCP.
Please check whether the linking device and the host PC are in the same subnet. Otherwise, the linking device will not be detected.
Feilian (Vince) Shen

HP DesignJet 111 not detected black and cian cartridges.

Similar Messages

Maybe you are looking for