HP DesignJet 800ps error 86:01 severe error 0x8010001
We have an HP DesignJet 800ps in which we have just changed the belt. After 2 successful (black only) printouts, and 1 unsuccessful colour printout (the blacks were all very grey and no color was printed) the front panel now displays error 86:01. If we hit "menu" we see "Severe error 0x8010001."
I have lubricated the slide bar. I have cleaned out all the dust from the suction holes. I have run all the tests I can (by holding down "up-arrow" + "enter" on bootup) and they all come out OK.
The one thing I haven't done, mostly because I'm not sure how, is to do step number 5 on the error boot, "Align print heads"
Anga2010 wrote:
Wow! What a completely unhelpful response. Can I just get a "go away little boy" instead? I AM the consurmer.
This is the only forum for the DesignJet 800ps printer there is! Suggesting a different forum is not what I would call "customer support" instead, I would call that a lazy response.
The link I gave above is for Designjet's and will be populated with users with experience that may be able to answer your question. This forum is focused on consumer level products - Deskjet's, Photosmart printers and similar products tpically selling for $500 or less.
Although you may be a standard consumer the Designjet's are not typical consumer items. You are free to ask here, but you should be aware that you are likely to get much better results posting in the HP Enterprise Designjet forum here.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V
Similar Messages
-
Postscript error/ HP DesignJet 800PS
Hello:
I have an issue printing PDFs to 2 HP DesignJet 800PS.
Error on Printer Display is 61:05
I tired all of the fixes listed under troubleshooting 61:05 errors.
Error printed on page is:
ERROR: typecheck
OFFENDING COMMAND: anchorsearch
stack:
(Pantone )
/None
true
/None
[/Separation /None /DeviceCMYK {0 0 0 }]
File created on Macintosh - Quark distilled to PDF. File prints fine to either DesignJet 800PS from Macintosh. This error only occurs when printing from Windows 2000 over ethernet to the Design Jet printers. Not all PDF's have this this issue.
Downloaded the latest driver from HP installed as a new printer, same problem. The Firmware is the latest version. This problem happens on all Windows workstations attempting to print these PDFs.
IF you print the PDF to a Image then print it, the image prints fine but I know it's 'printing a bitmap at that point.
I talked to HP tech support and they suggested sending the file via AppleTalk?? From a PC? I assumed they meant changing the encoding from Binary to Ascii2.
One other thing, when files are printed from the Windows machines the sizes are sometimes are off slighty..
Anybody have any ideas?Anga2010 wrote:
Wow! What a completely unhelpful response. Can I just get a "go away little boy" instead? I AM the consurmer.
This is the only forum for the DesignJet 800ps printer there is! Suggesting a different forum is not what I would call "customer support" instead, I would call that a lazy response.
The link I gave above is for Designjet's and will be populated with users with experience that may be able to answer your question. This forum is focused on consumer level products - Deskjet's, Photosmart printers and similar products tpically selling for $500 or less.
Although you may be a standard consumer the Designjet's are not typical consumer items. You are free to ask here, but you should be aware that you are likely to get much better results posting in the HP Enterprise Designjet forum here.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V -
Elements 9.0 Severe Error Opening a new project
Hi,
after opening a new project, there is just a grey "PremiereElements" Screen. If I then open the project I just created, an error message appears "severe error... shut down... try to save new project".
Measures to toubleshoots already taken:
- reinstall premiere and photoshop elements
- delete all elements files from users and program folder
- install all updates
- verify latest version of quicktime.
I am new in this forum and hope, I did not miss an already existing discussion. If so, please do not hesitate to lead me to this discussion and sorry in advance.
Thanks for help
hgk1409hgk1409
For now I am assuming that you are running Premiere Elements 9 on Windows 7, 8, or 8.1 64 bit......and, that the problem exists with and without the antivirus and firewall(s) disabled.....
What computer operating system is your Premiere Elements 9 running on? Have you installed the 9.0.1 Update for the program? If not, please do so from the following link from Adobe
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4929
You can install the above even with Premiere Elements 9 closed.
Can we assume that you did that when you wrote
- install all updates
Did you delete the Adobe Premiere Elements Prefs file, and, if that did not work, the whole 9.0 Folder in which the Adobe Premiere Elements Prefs file exists?
Can we assume that you have when you wrote
- delete all elements files from users and program folder
When was the last time you used the program successfully?
When you did the uninstall/reinstall, did you do the sequence
1. Uninstall via Control Panel
2. free ccleaner run through (regular cleaner and registry cleaner parts)
CCleaner - Download
3. reinstall with antivirus and firewall(s) disabled
Let us start here and then decide what next based on your details.
Thank you.
ATR -
EHP6 - Severe error(s) occurred in phase PREP_INPUT/KX_CPYORG!
Hi All,
We are at the "extraction" stage of our EHP6 upgrade for pre-prod system, this serves as rehearsal for the execution of the same upgrade in production system.
However, SUM is stopped due to below error.
SUM - EXTRACTION phase stops at PREP_INPUT/KX_CPYORG, showing the error message below:
Severe error occurred in phase PREP_INPUT/KX_CPYORG!
Last error code set is: Failed to copy 1 files, check 'KX_CPYORG.LOG' for details
And checking from log, it shows "4EETQ399 Source file 'exe_syb.lst' missing!". This file doesn't exist anywhere in the system. Also, checking from logs of previous EHP6 upgrade in our DEV and QAS systems, this file doesn't exist. And instead of "exe_syb.lst", what has been copied from previous upgrades is 'exe_db6.lst'. We are at HP-UX and DB6.
Logs:
4EETQ399 Source file 'exe_syb.lst' missing!
1 ETQ399 Copied 821 files.
1EETQ399 Last error code set is: Failed to copy 1 files, check 'KX_CPYORG.LOG' for details
1EETQ204 Upgrade phase "KX_CPYORG" aborted with severe errors ("20140721180154")
Please advise how to fix.
Regards,
PhilipHI,
Kindly share 'KX_CPYORG.LOG files for analysis.Meanwhile try to patch the kernel with latest available at SMP and recheck for permissions and ownerships under kernel directory.
Regards,
Gaurav -
The message: "Severe Error; Can 't load resourse file; can not run" appears after closing Firefox4. All other applications on my pc do not have this problem.
I've found text of this error in npdjvu.dll plugin, remove it and error seems to disappear.
-
Hello to all,
I am new to Arch Linux and not that experienced in Linux. But I want to learn more. In fact, I have learned a lot since I switched from Fedora to Arch.
I will straight away go to my problem:
As indicated in the subject, I have noticed several errors concerning [drm:....] this morning when I booted and checked my system with journalctl -b.
I do not know how long these errors are there because I yesterday used journalctl for the first time.
Here is the result of journalctl -b:
-- Logs begin at Mi 2013-03-13 19:24:10 CET, end at Fr 2013-05-17 10:19:37 CEST. --
Mai 17 08:07:45 Nathan systemd-journal[113]: Allowing runtime journal files to grow to 193.3M.
Mai 17 08:07:45 Nathan kernel: Initializing cgroup subsys cpuset
Mai 17 08:07:45 Nathan kernel: Initializing cgroup subsys cpu
Mai 17 08:07:45 Nathan kernel: Linux version 3.9.2-1-ARCH (nobody@thomas) (gcc version 4.8.0 20130502 (prerelease) (GCC) ) #1 SMP PREEMPT Sat May 11 20:31:08 CEST 2013
Mai 17 08:07:45 Nathan kernel: Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=65820d33-ca90-4ed3-9b9e-e26a75f9331f ro quiet
Mai 17 08:07:45 Nathan kernel: e820: BIOS-provided physical RAM map:
Mai 17 08:07:45 Nathan kernel: BIOS-e820: [mem 0x0000000000000000-0x000000000008dfff] usable
Mai 17 08:07:45 Nathan kernel: BIOS-e820: [mem 0x000000000008e000-0x000000000008ffff] reserved
Mai 17 08:07:45 Nathan kernel: BIOS-e820: [mem 0x0000000000090000-0x000000000009fbff] usable
Mai 17 08:07:45 Nathan kernel: BIOS-e820: [mem 0x000000000009fc00-0x00000000000fffff] reserved
Mai 17 08:07:45 Nathan kernel: BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
Mai 17 08:07:45 Nathan kernel: BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
Mai 17 08:07:45 Nathan kernel: BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
Mai 17 08:07:45 Nathan kernel: BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
Mai 17 08:07:45 Nathan kernel: BIOS-e820: [mem 0x0000000040200000-0x000000008ad33fff] usable
Mai 17 08:07:45 Nathan kernel: BIOS-e820: [mem 0x000000008ad34000-0x000000008ad5efff] ACPI NVS
Mai 17 08:07:45 Nathan kernel: BIOS-e820: [mem 0x000000008ad5f000-0x000000008afa1fff] ACPI data
Mai 17 08:07:45 Nathan kernel: BIOS-e820: [mem 0x000000008afa2000-0x000000008affefff] reserved
Mai 17 08:07:45 Nathan kernel: BIOS-e820: [mem 0x000000008afff000-0x000000008affffff] ACPI data
Mai 17 08:07:45 Nathan kernel: BIOS-e820: [mem 0x000000008b000000-0x000000008f9fffff] reserved
Mai 17 08:07:45 Nathan kernel: BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
Mai 17 08:07:45 Nathan kernel: BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
Mai 17 08:07:45 Nathan kernel: BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
Mai 17 08:07:45 Nathan kernel: BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved
Mai 17 08:07:45 Nathan kernel: BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved
Mai 17 08:07:45 Nathan kernel: BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
Mai 17 08:07:45 Nathan kernel: BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
Mai 17 08:07:45 Nathan kernel: BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
Mai 17 08:07:45 Nathan kernel: BIOS-e820: [mem 0x0000000100000000-0x000000016fdfffff] usable
Mai 17 08:07:45 Nathan kernel: NX (Execute Disable) protection: active
Mai 17 08:07:45 Nathan kernel: SMBIOS 2.4 present.
Mai 17 08:07:45 Nathan kernel: DMI: Apple Inc. MacBookAir4,2/Mac-742912EFDBEE19B3, BIOS MBA41.88Z.0077.B0F.1201241549 01/24/2012
Mai 17 08:07:45 Nathan kernel: e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
Mai 17 08:07:45 Nathan kernel: e820: remove [mem 0x000a0000-0x000fffff] usable
Mai 17 08:07:45 Nathan kernel: No AGP bridge found
Mai 17 08:07:45 Nathan kernel: e820: last_pfn = 0x16fe00 max_arch_pfn = 0x400000000
Mai 17 08:07:45 Nathan kernel: MTRR default type: write-back
Mai 17 08:07:45 Nathan kernel: MTRR fixed ranges enabled:
Mai 17 08:07:45 Nathan kernel: 00000-9FFFF write-back
Mai 17 08:07:45 Nathan kernel: A0000-BFFFF uncachable
Mai 17 08:07:45 Nathan kernel: C0000-DFFFF write-protect
Mai 17 08:07:45 Nathan kernel: E0000-FFFFF uncachable
Mai 17 08:07:45 Nathan kernel: MTRR variable ranges enabled:
Mai 17 08:07:45 Nathan kernel: 0 base 0C0000000 mask FC0000000 uncachable
Mai 17 08:07:45 Nathan kernel: 1 base 0A0000000 mask FE0000000 uncachable
Mai 17 08:07:45 Nathan kernel: 2 base 090000000 mask FF0000000 uncachable
Mai 17 08:07:45 Nathan kernel: 3 base 08C000000 mask FFC000000 uncachable
Mai 17 08:07:45 Nathan kernel: 4 base 08B800000 mask FFF800000 uncachable
Mai 17 08:07:45 Nathan kernel: 5 disabled
Mai 17 08:07:45 Nathan kernel: 6 disabled
Mai 17 08:07:45 Nathan kernel: 7 disabled
Mai 17 08:07:45 Nathan kernel: 8 disabled
Mai 17 08:07:45 Nathan kernel: 9 disabled
Mai 17 08:07:45 Nathan kernel: x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
Mai 17 08:07:45 Nathan kernel: e820: last_pfn = 0x8ad34 max_arch_pfn = 0x400000000
Mai 17 08:07:45 Nathan kernel: Scanning 1 areas for low memory corruption
Mai 17 08:07:45 Nathan kernel: Base memory trampoline at [ffff880000099000] 99000 size 24576
Mai 17 08:07:45 Nathan kernel: reserving inaccessible SNB gfx pages
Mai 17 08:07:45 Nathan kernel: init_memory_mapping: [mem 0x00000000-0x000fffff]
Mai 17 08:07:45 Nathan kernel: [mem 0x00000000-0x000fffff] page 4k
Mai 17 08:07:45 Nathan kernel: BRK [0x01b30000, 0x01b30fff] PGTABLE
Mai 17 08:07:45 Nathan kernel: BRK [0x01b31000, 0x01b31fff] PGTABLE
Mai 17 08:07:45 Nathan kernel: BRK [0x01b32000, 0x01b32fff] PGTABLE
Mai 17 08:07:45 Nathan kernel: init_memory_mapping: [mem 0x16fc00000-0x16fdfffff]
Mai 17 08:07:45 Nathan kernel: [mem 0x16fc00000-0x16fdfffff] page 2M
Mai 17 08:07:45 Nathan kernel: BRK [0x01b33000, 0x01b33fff] PGTABLE
Mai 17 08:07:45 Nathan kernel: init_memory_mapping: [mem 0x16c000000-0x16fbfffff]
Mai 17 08:07:45 Nathan kernel: [mem 0x16c000000-0x16fbfffff] page 2M
Mai 17 08:07:45 Nathan kernel: init_memory_mapping: [mem 0x100000000-0x16bffffff]
Mai 17 08:07:45 Nathan kernel: [mem 0x100000000-0x16bffffff] page 2M
Mai 17 08:07:45 Nathan kernel: BRK [0x01b34000, 0x01b34fff] PGTABLE
Mai 17 08:07:45 Nathan kernel: init_memory_mapping: [mem 0x00100000-0x1fffffff]
Mai 17 08:07:45 Nathan kernel: [mem 0x00100000-0x001fffff] page 4k
Mai 17 08:07:45 Nathan kernel: [mem 0x00200000-0x1fffffff] page 2M
Mai 17 08:07:45 Nathan kernel: init_memory_mapping: [mem 0x20200000-0x3fffffff]
Mai 17 08:07:45 Nathan kernel: [mem 0x20200000-0x3fffffff] page 2M
Mai 17 08:07:45 Nathan kernel: init_memory_mapping: [mem 0x40200000-0x8ad33fff]
Mai 17 08:07:45 Nathan kernel: [mem 0x40200000-0x8abfffff] page 2M
Mai 17 08:07:45 Nathan kernel: [mem 0x8ac00000-0x8ad33fff] page 4k
Mai 17 08:07:45 Nathan kernel: RAMDISK: [mem 0x37a56000-0x37d22fff]
Mai 17 08:07:45 Nathan kernel: ACPI: RSDP 00000000000fe020 00024 (v02 APPLE )
Mai 17 08:07:45 Nathan kernel: ACPI: XSDT 000000008ad8e1c0 000AC (v01 APPLE Apple00 00000060 01000013)
Mai 17 08:07:45 Nathan kernel: ACPI: FACP 000000008ad8c000 000F4 (v04 APPLE Apple00 00000060 Loki 0000005F)
Mai 17 08:07:45 Nathan kernel: ACPI: DSDT 000000008ad81000 05050 (v01 APPLE MacBookA 00040001 INTL 20100915)
Mai 17 08:07:45 Nathan kernel: ACPI: FACS 000000008ad3e000 00040
Mai 17 08:07:45 Nathan kernel: ACPI: HPET 000000008ad8b000 00038 (v01 APPLE Apple00 00000001 Loki 0000005F)
Mai 17 08:07:45 Nathan kernel: ACPI: APIC 000000008ad8a000 000BC (v02 APPLE Apple00 00000001 Loki 0000005F)
Mai 17 08:07:45 Nathan kernel: ACPI: SBST 000000008ad88000 00030 (v01 APPLE Apple00 00000001 Loki 0000005F)
Mai 17 08:07:45 Nathan kernel: ACPI: ECDT 000000008ad87000 00053 (v01 APPLE Apple00 00000001 Loki 0000005F)
Mai 17 08:07:45 Nathan kernel: ACPI: SSDT 000000008ad7d000 00024 (v01 APPLE SmcDppt 00001000 INTL 20100915)
Mai 17 08:07:45 Nathan kernel: ACPI: SSDT 000000008ad7b000 006CA (v01 APPLE UsbSD 00001000 INTL 20100915)
Mai 17 08:07:45 Nathan kernel: ACPI: SSDT 000000008ad77000 00159 (v02 APPLE IGHda 00001000 INTL 20100915)
Mai 17 08:07:45 Nathan kernel: ACPI: SSDT 000000008ad73000 015EB (v02 APPLE SsdtIGPU 00001000 INTL 20100915)
Mai 17 08:07:45 Nathan kernel: ACPI: SSDT 000000008ad72000 00506 (v01 PmRef Cpu0Ist 00003000 INTL 20100915)
Mai 17 08:07:45 Nathan kernel: ACPI: SSDT 000000008ad71000 009B1 (v01 PmRef CpuPm 00003000 INTL 20100915)
Mai 17 08:07:45 Nathan kernel: ACPI: SSDT 000000008ad70000 00315 (v01 PmRef Cpu0Tst 00003000 INTL 20100915)
Mai 17 08:07:45 Nathan kernel: ACPI: SSDT 000000008ad6f000 0037A (v01 PmRef ApTst 00003000 INTL 20100915)
Mai 17 08:07:45 Nathan kernel: ACPI: MCFG 000000008ad89000 0003C (v01 APPLE Apple00 00000001 Loki 0000005F)
Mai 17 08:07:45 Nathan kernel: ACPI: SSDT 000000008ad80000 000FA (v01 SataRe SataPri 00001000 INTL 20100915)
Mai 17 08:07:45 Nathan kernel: ACPI: SSDT 000000008ad7f000 000D0 (v01 SataRe SataSec 00001000 INTL 20100915)
Mai 17 08:07:45 Nathan kernel: ACPI: SSDT 000000008ad7e000 00032 (v01 Apple SsdtS3 00001000 INTL 20100915)
Mai 17 08:07:45 Nathan kernel: ACPI: Local APIC address 0xfee00000
Mai 17 08:07:45 Nathan kernel: No NUMA configuration found
Mai 17 08:07:45 Nathan kernel: Faking a node at [mem 0x0000000000000000-0x000000016fdfffff]
Mai 17 08:07:45 Nathan kernel: Initmem setup node 0 [mem 0x00000000-0x16fdfffff]
Mai 17 08:07:45 Nathan kernel: NODE_DATA [mem 0x16fdf8000-0x16fdfcfff]
Mai 17 08:07:45 Nathan kernel: [ffffea0000000000-ffffea0005bfffff] PMD -> [ffff88016b400000-ffff88016f3fffff] on node 0
Mai 17 08:07:45 Nathan kernel: Zone ranges:
Mai 17 08:07:45 Nathan kernel: DMA [mem 0x00001000-0x00ffffff]
Mai 17 08:07:45 Nathan kernel: DMA32 [mem 0x01000000-0xffffffff]
Mai 17 08:07:45 Nathan kernel: Normal [mem 0x100000000-0x16fdfffff]
Mai 17 08:07:45 Nathan kernel: Movable zone start for each node
Mai 17 08:07:45 Nathan kernel: Early memory node ranges
Mai 17 08:07:45 Nathan kernel: node 0: [mem 0x00001000-0x0008dfff]
Mai 17 08:07:45 Nathan kernel: node 0: [mem 0x00090000-0x0009efff]
Mai 17 08:07:45 Nathan kernel: node 0: [mem 0x00100000-0x1fffffff]
Mai 17 08:07:45 Nathan kernel: node 0: [mem 0x20200000-0x3fffffff]
Mai 17 08:07:45 Nathan kernel: node 0: [mem 0x40200000-0x8ad33fff]
Mai 17 08:07:45 Nathan kernel: node 0: [mem 0x100000000-0x16fdfffff]
Mai 17 08:07:45 Nathan kernel: On node 0 totalpages: 1025744
Mai 17 08:07:45 Nathan kernel: DMA zone: 64 pages used for memmap
Mai 17 08:07:45 Nathan kernel: DMA zone: 156 pages reserved
Mai 17 08:07:45 Nathan kernel: DMA zone: 3996 pages, LIFO batch:0
Mai 17 08:07:45 Nathan kernel: DMA32 zone: 8805 pages used for memmap
Mai 17 08:07:45 Nathan kernel: DMA32 zone: 563508 pages, LIFO batch:31
Mai 17 08:07:45 Nathan kernel: Normal zone: 7160 pages used for memmap
Mai 17 08:07:45 Nathan kernel: Normal zone: 458240 pages, LIFO batch:31
Mai 17 08:07:45 Nathan kernel: ACPI: PM-Timer IO Port: 0x408
Mai 17 08:07:45 Nathan kernel: ACPI: Local APIC address 0xfee00000
Mai 17 08:07:45 Nathan kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Mai 17 08:07:45 Nathan kernel: ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
Mai 17 08:07:45 Nathan kernel: ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
Mai 17 08:07:45 Nathan kernel: ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
Mai 17 08:07:45 Nathan kernel: ACPI: LAPIC (acpi_id[0x05] lapic_id[0xff] disabled)
Mai 17 08:07:45 Nathan kernel: ACPI: LAPIC (acpi_id[0x06] lapic_id[0xff] disabled)
Mai 17 08:07:45 Nathan kernel: ACPI: LAPIC (acpi_id[0x07] lapic_id[0xff] disabled)
Mai 17 08:07:45 Nathan kernel: ACPI: LAPIC (acpi_id[0x08] lapic_id[0xff] disabled)
Mai 17 08:07:45 Nathan kernel: ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
Mai 17 08:07:45 Nathan kernel: ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
Mai 17 08:07:45 Nathan kernel: ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
Mai 17 08:07:45 Nathan kernel: ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
Mai 17 08:07:45 Nathan kernel: ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
Mai 17 08:07:45 Nathan kernel: ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
Mai 17 08:07:45 Nathan kernel: ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
Mai 17 08:07:45 Nathan kernel: ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
Mai 17 08:07:45 Nathan kernel: ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
Mai 17 08:07:45 Nathan kernel: IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
Mai 17 08:07:45 Nathan kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Mai 17 08:07:45 Nathan kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Mai 17 08:07:45 Nathan kernel: ACPI: IRQ0 used by override.
Mai 17 08:07:45 Nathan kernel: ACPI: IRQ2 used by override.
Mai 17 08:07:45 Nathan kernel: ACPI: IRQ9 used by override.
Mai 17 08:07:45 Nathan kernel: Using ACPI (MADT) for SMP configuration information
Mai 17 08:07:45 Nathan kernel: ACPI: HPET id: 0x8086a201 base: 0xfed00000
Mai 17 08:07:45 Nathan kernel: smpboot: Allowing 8 CPUs, 4 hotplug CPUs
Mai 17 08:07:45 Nathan kernel: nr_irqs_gsi: 40
Mai 17 08:07:45 Nathan kernel: PM: Registered nosave memory: 000000000008e000 - 0000000000090000
Mai 17 08:07:45 Nathan kernel: PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
Mai 17 08:07:45 Nathan kernel: PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
Mai 17 08:07:45 Nathan kernel: PM: Registered nosave memory: 0000000020000000 - 0000000020200000
Mai 17 08:07:45 Nathan kernel: PM: Registered nosave memory: 0000000040000000 - 0000000040200000
Mai 17 08:07:45 Nathan kernel: PM: Registered nosave memory: 000000008ad34000 - 000000008ad5f000
Mai 17 08:07:45 Nathan kernel: PM: Registered nosave memory: 000000008ad5f000 - 000000008afa2000
Mai 17 08:07:45 Nathan kernel: PM: Registered nosave memory: 000000008afa2000 - 000000008afff000
Mai 17 08:07:45 Nathan kernel: PM: Registered nosave memory: 000000008afff000 - 000000008b000000
Mai 17 08:07:45 Nathan kernel: PM: Registered nosave memory: 000000008b000000 - 000000008fa00000
Mai 17 08:07:45 Nathan kernel: PM: Registered nosave memory: 000000008fa00000 - 00000000e0000000
Mai 17 08:07:45 Nathan kernel: PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
Mai 17 08:07:45 Nathan kernel: PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
Mai 17 08:07:45 Nathan kernel: PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
Mai 17 08:07:45 Nathan kernel: PM: Registered nosave memory: 00000000fec01000 - 00000000fed00000
Mai 17 08:07:45 Nathan kernel: PM: Registered nosave memory: 00000000fed00000 - 00000000fed04000
Mai 17 08:07:45 Nathan kernel: PM: Registered nosave memory: 00000000fed04000 - 00000000fed10000
Mai 17 08:07:45 Nathan kernel: PM: Registered nosave memory: 00000000fed10000 - 00000000fed14000
Mai 17 08:07:45 Nathan kernel: PM: Registered nosave memory: 00000000fed14000 - 00000000fed18000
Mai 17 08:07:45 Nathan kernel: PM: Registered nosave memory: 00000000fed18000 - 00000000fed1a000
Mai 17 08:07:45 Nathan kernel: PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
Mai 17 08:07:45 Nathan kernel: PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
Mai 17 08:07:45 Nathan kernel: PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
Mai 17 08:07:45 Nathan kernel: PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
Mai 17 08:07:45 Nathan kernel: PM: Registered nosave memory: 00000000fee01000 - 00000000ff800000
Mai 17 08:07:45 Nathan kernel: PM: Registered nosave memory: 00000000ff800000 - 0000000100000000
Mai 17 08:07:45 Nathan kernel: e820: [mem 0x8fa00000-0xdfffffff] available for PCI devices
Mai 17 08:07:45 Nathan kernel: Booting paravirtualized kernel on bare hardware
Mai 17 08:07:45 Nathan kernel: setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1
Mai 17 08:07:45 Nathan kernel: PERCPU: Embedded 28 pages/cpu @ffff88016fa00000 s85824 r8192 d20672 u262144
Mai 17 08:07:45 Nathan kernel: pcpu-alloc: s85824 r8192 d20672 u262144 alloc=1*2097152
Mai 17 08:07:45 Nathan kernel: pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Mai 17 08:07:45 Nathan kernel: Built 1 zonelists in Node order, mobility grouping on. Total pages: 1009559
Mai 17 08:07:45 Nathan kernel: Policy zone: Normal
Mai 17 08:07:45 Nathan kernel: Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=65820d33-ca90-4ed3-9b9e-e26a75f9331f ro quiet
Mai 17 08:07:45 Nathan kernel: PID hash table entries: 4096 (order: 3, 32768 bytes)
Mai 17 08:07:45 Nathan kernel: __ex_table already sorted, skipping sort
Mai 17 08:07:45 Nathan kernel: xsave: enabled xstate_bv 0x7, cntxt size 0x340
Mai 17 08:07:45 Nathan kernel: Checking aperture...
Mai 17 08:07:45 Nathan kernel: No AGP bridge found
Mai 17 08:07:45 Nathan kernel: Calgary: detecting Calgary via BIOS EBDA area
Mai 17 08:07:45 Nathan kernel: Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Mai 17 08:07:45 Nathan kernel: Memory: 3955240k/6027264k available (4981k kernel code, 1924288k absent, 147736k reserved, 3968k data, 1092k init)
Mai 17 08:07:45 Nathan kernel: SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Mai 17 08:07:45 Nathan kernel: Preemptible hierarchical RCU implementation.
Mai 17 08:07:45 Nathan kernel: RCU dyntick-idle grace-period acceleration is enabled.
Mai 17 08:07:45 Nathan kernel: Dump stacks of tasks blocking RCU-preempt GP.
Mai 17 08:07:45 Nathan kernel: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8.
Mai 17 08:07:45 Nathan kernel: NR_IRQS:4352 nr_irqs:744 16
Mai 17 08:07:45 Nathan kernel: Console: colour dummy device 80x25
Mai 17 08:07:45 Nathan kernel: console [tty0] enabled
Mai 17 08:07:45 Nathan kernel: allocated 16777216 bytes of page_cgroup
Mai 17 08:07:45 Nathan kernel: please try 'cgroup_disable=memory' option if you don't want memory cgroups
Mai 17 08:07:45 Nathan kernel: hpet clockevent registered
Mai 17 08:07:45 Nathan kernel: tsc: Fast TSC calibration using PIT
Mai 17 08:07:45 Nathan kernel: tsc: Detected 1699.863 MHz processor
Mai 17 08:07:45 Nathan kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 3401.38 BogoMIPS (lpj=5666210)
Mai 17 08:07:45 Nathan kernel: pid_max: default: 32768 minimum: 301
Mai 17 08:07:45 Nathan kernel: Security Framework initialized
Mai 17 08:07:45 Nathan kernel: AppArmor: AppArmor disabled by boot time parameter
Mai 17 08:07:45 Nathan kernel: Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mai 17 08:07:45 Nathan kernel: Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mai 17 08:07:45 Nathan kernel: Mount-cache hash table entries: 256
Mai 17 08:07:45 Nathan kernel: Initializing cgroup subsys cpuacct
Mai 17 08:07:45 Nathan kernel: Initializing cgroup subsys memory
Mai 17 08:07:45 Nathan kernel: Initializing cgroup subsys devices
Mai 17 08:07:45 Nathan kernel: Initializing cgroup subsys freezer
Mai 17 08:07:45 Nathan kernel: Initializing cgroup subsys net_cls
Mai 17 08:07:45 Nathan kernel: Initializing cgroup subsys blkio
Mai 17 08:07:45 Nathan kernel: CPU: Physical Processor ID: 0
Mai 17 08:07:45 Nathan kernel: CPU: Processor Core ID: 0
Mai 17 08:07:45 Nathan kernel: mce: CPU supports 7 MCE banks
Mai 17 08:07:45 Nathan kernel: CPU0: Thermal monitoring enabled (TM1)
Mai 17 08:07:45 Nathan kernel: [117B blob data]
Mai 17 08:07:45 Nathan kernel: Freeing SMP alternatives: 20k freed
Mai 17 08:07:45 Nathan kernel: ACPI: Core revision 20130117
Mai 17 08:07:45 Nathan kernel: ACPI: All ACPI Tables successfully acquired
Mai 17 08:07:45 Nathan kernel: ftrace: allocating 19539 entries in 77 pages
Mai 17 08:07:45 Nathan kernel: ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
Mai 17 08:07:45 Nathan kernel: smpboot: CPU0: Intel(R) Core(TM) i5-2557M CPU @ 1.70GHz (fam: 06, model: 2a, stepping: 07)
Mai 17 08:07:45 Nathan kernel: TSC deadline timer enabled
Mai 17 08:07:45 Nathan kernel: Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, Intel PMU driver.
Mai 17 08:07:45 Nathan kernel: perf_event_intel: PEBS disabled due to CPU errata, please upgrade microcode
Mai 17 08:07:45 Nathan kernel: ... version: 3
Mai 17 08:07:45 Nathan kernel: ... bit width: 48
Mai 17 08:07:45 Nathan kernel: ... generic registers: 4
Mai 17 08:07:45 Nathan kernel: ... value mask: 0000ffffffffffff
Mai 17 08:07:45 Nathan kernel: ... max period: 000000007fffffff
Mai 17 08:07:45 Nathan kernel: ... fixed-purpose events: 3
Mai 17 08:07:45 Nathan kernel: ... event mask: 000000070000000f
Mai 17 08:07:45 Nathan kernel: NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
Mai 17 08:07:45 Nathan kernel: smpboot: Booting Node 0, Processors #1 #2 #3
Mai 17 08:07:45 Nathan kernel: Brought up 4 CPUs
Mai 17 08:07:45 Nathan kernel: smpboot: Total of 4 processors activated (13604.52 BogoMIPS)
Mai 17 08:07:45 Nathan kernel: devtmpfs: initialized
Mai 17 08:07:45 Nathan kernel: PM: Registering ACPI NVS region [mem 0x8ad34000-0x8ad5efff] (176128 bytes)
Mai 17 08:07:45 Nathan kernel: RTC time: 6:07:41, date: 05/17/13
Mai 17 08:07:45 Nathan kernel: NET: Registered protocol family 16
Mai 17 08:07:45 Nathan kernel: ACPI: bus type PCI registered
Mai 17 08:07:45 Nathan kernel: PCI: MMCONFIG for domain 0000 [bus 00-97] at [mem 0xe0000000-0xe97fffff] (base 0xe0000000)
Mai 17 08:07:45 Nathan kernel: PCI: MMCONFIG at [mem 0xe0000000-0xe97fffff] reserved in E820
Mai 17 08:07:45 Nathan kernel: PCI: Using configuration type 1 for base access
Mai 17 08:07:45 Nathan kernel: bio: create slab <bio-0> at 0
Mai 17 08:07:45 Nathan kernel: ACPI: Added _OSI(Module Device)
Mai 17 08:07:45 Nathan kernel: ACPI: Added _OSI(Processor Device)
Mai 17 08:07:45 Nathan kernel: ACPI: Added _OSI(3.0 _SCP Extensions)
Mai 17 08:07:45 Nathan kernel: ACPI: Added _OSI(Processor Aggregator Device)
Mai 17 08:07:45 Nathan kernel: ACPI: EC: EC description table is found, configuring boot EC
Mai 17 08:07:45 Nathan kernel: [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
Mai 17 08:07:45 Nathan kernel: ACPI: SSDT 000000008ad39190 00781 (v01 PmRef Cpu0Cst 00003001 INTL 20100915)
Mai 17 08:07:45 Nathan kernel: ACPI: Dynamic OEM Table Load:
Mai 17 08:07:45 Nathan kernel: ACPI: SSDT (null) 00781 (v01 PmRef Cpu0Cst 00003001 INTL 20100915)
Mai 17 08:07:45 Nathan kernel: ACPI: SSDT 000000008ad3a710 003A4 (v01 PmRef ApIst 00003000 INTL 20100915)
Mai 17 08:07:45 Nathan kernel: ACPI: Dynamic OEM Table Load:
Mai 17 08:07:45 Nathan kernel: ACPI: SSDT (null) 003A4 (v01 PmRef ApIst 00003000 INTL 20100915)
Mai 17 08:07:45 Nathan kernel: ACPI: SSDT 000000008ad38d90 00119 (v01 PmRef ApCst 00003000 INTL 20100915)
Mai 17 08:07:45 Nathan kernel: ACPI: Dynamic OEM Table Load:
Mai 17 08:07:45 Nathan kernel: ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20100915)
Mai 17 08:07:45 Nathan kernel: ACPI: Interpreter enabled
Mai 17 08:07:45 Nathan kernel: ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130117/hwxface-568)
Mai 17 08:07:45 Nathan kernel: ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130117/hwxface-568)
Mai 17 08:07:45 Nathan kernel: ACPI: (supports S0 S3 S4 S5)
Mai 17 08:07:45 Nathan kernel: ACPI: Using IOAPIC for interrupt routing
Mai 17 08:07:45 Nathan kernel: PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
Mai 17 08:07:45 Nathan kernel: ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
Mai 17 08:07:45 Nathan kernel: acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-97] only partially covers this bridge
Mai 17 08:07:45 Nathan kernel: PCI host bridge to bus 0000:00
Mai 17 08:07:45 Nathan kernel: pci_bus 0000:00: root bus resource [bus 00-ff]
Mai 17 08:07:45 Nathan kernel: pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
Mai 17 08:07:45 Nathan kernel: pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
Mai 17 08:07:45 Nathan kernel: pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
Mai 17 08:07:45 Nathan kernel: pci_bus 0000:00: root bus resource [mem 0x8fa00000-0xfeafffff]
Mai 17 08:07:45 Nathan kernel: pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
Mai 17 08:07:45 Nathan kernel: pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
Mai 17 08:07:45 Nathan kernel: pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
Mai 17 08:07:45 Nathan kernel: pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
Mai 17 08:07:45 Nathan kernel: pci 0000:00:01.0: System wakeup disabled by ACPI
Mai 17 08:07:45 Nathan kernel: pci 0000:00:02.0: [8086:0116] type 00 class 0x030000
Mai 17 08:07:45 Nathan kernel: pci 0000:00:02.0: reg 10: [mem 0xa0000000-0xa03fffff 64bit]
Mai 17 08:07:45 Nathan kernel: pci 0000:00:02.0: reg 18: [mem 0x90000000-0x9fffffff 64bit pref]
Mai 17 08:07:45 Nathan kernel: pci 0000:00:02.0: reg 20: [io 0x2000-0x203f]
Mai 17 08:07:45 Nathan kernel: pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
Mai 17 08:07:45 Nathan kernel: pci 0000:00:16.0: reg 10: [mem 0xa0607100-0xa060710f 64bit]
Mai 17 08:07:45 Nathan kernel: pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
Mai 17 08:07:45 Nathan kernel: pci 0000:00:1a.0: [8086:1c2c] type 00 class 0x0c0300
Mai 17 08:07:45 Nathan kernel: pci 0000:00:1a.0: reg 20: [io 0x2140-0x215f]
Mai 17 08:07:45 Nathan kernel: pci 0000:00:1a.7: [8086:1c2d] type 00 class 0x0c0320
Mai 17 08:07:45 Nathan kernel: pci 0000:00:1a.7: reg 10: [mem 0xa0606c00-0xa0606fff]
Mai 17 08:07:45 Nathan kernel: pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
Mai 17 08:07:45 Nathan kernel: pci 0000:00:1a.7: System wakeup disabled by ACPI
Mai 17 08:07:45 Nathan kernel: pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
Mai 17 08:07:45 Nathan kernel: pci 0000:00:1b.0: reg 10: [mem 0xa0600000-0xa0603fff 64bit]
Mai 17 08:07:45 Nathan kernel: pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
Mai 17 08:07:45 Nathan kernel: pci 0000:00:1b.0: System wakeup disabled by ACPI
Mai 17 08:07:45 Nathan kernel: pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
Mai 17 08:07:45 Nathan kernel: pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
Mai 17 08:07:45 Nathan kernel: pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
Mai 17 08:07:45 Nathan kernel: pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
Mai 17 08:07:45 Nathan kernel: pci 0000:00:1c.1: System wakeup disabled by ACPI
Mai 17 08:07:45 Nathan kernel: pci 0000:00:1d.0: [8086:1c27] type 00 class 0x0c0300
Mai 17 08:07:45 Nathan kernel: pci 0000:00:1d.0: reg 20: [io 0x20e0-0x20ff]
Mai 17 08:07:45 Nathan kernel: pci 0000:00:1d.7: [8086:1c26] type 00 class 0x0c0320
Mai 17 08:07:45 Nathan kernel: pci 0000:00:1d.7: reg 10: [mem 0xa0606800-0xa0606bff]
Mai 17 08:07:45 Nathan kernel: pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
Mai 17 08:07:45 Nathan kernel: pci 0000:00:1d.7: System wakeup disabled by ACPI
Mai 17 08:07:45 Nathan kernel: pci 0000:00:1f.0: [8086:1c4d] type 00 class 0x060100
Mai 17 08:07:45 Nathan kernel: pci 0000:00:1f.2: [8086:1c01] type 00 class 0x01018f
Mai 17 08:07:45 Nathan kernel: pci 0000:00:1f.2: reg 10: [io 0x2168-0x216f]
Mai 17 08:07:45 Nathan kernel: pci 0000:00:1f.2: reg 14: [io 0x217c-0x217f]
Mai 17 08:07:45 Nathan kernel: pci 0000:00:1f.2: reg 18: [io 0x2160-0x2167]
Mai 17 08:07:45 Nathan kernel: pci 0000:00:1f.2: reg 1c: [io 0x2178-0x217b]
Mai 17 08:07:45 Nathan kernel: pci 0000:00:1f.2: reg 20: [io 0x2060-0x206f]
Mai 17 08:07:45 Nathan kernel: pci 0000:00:1f.2: reg 24: [io 0xffe0-0xffef]
Mai 17 08:07:45 Nathan kernel: pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
Mai 17 08:07:45 Nathan kernel: pci 0000:00:1f.3: reg 10: [mem 0xa0607000-0xa06070ff 64bit]
Mai 17 08:07:45 Nathan kernel: pci 0000:00:1f.3: reg 20: [io 0xefa0-0xefbf]
Mai 17 08:07:45 Nathan kernel: pci 0000:03:00.0: [8086:151a] type 01 class 0x060400
Mai 17 08:07:45 Nathan kernel: pci 0000:03:00.0: supports D1 D2
Mai 17 08:07:45 Nathan kernel: pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
Mai 17 08:07:45 Nathan kernel: pci 0000:00:01.0: PCI bridge to [bus 03-97]
Mai 17 08:07:45 Nathan kernel: pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
Mai 17 08:07:45 Nathan kernel: pci 0000:00:01.0: bridge window [mem 0xa0700000-0xa49fffff]
Mai 17 08:07:45 Nathan kernel: pci 0000:00:01.0: bridge window [mem 0xa4a00000-0xa89fffff 64bit pref]
Mai 17 08:07:45 Nathan kernel: pci 0000:04:00.0: [8086:151a] type 01 class 0x060400
Mai 17 08:07:45 Nathan kernel: pci 0000:04:00.0: supports D1 D2
Mai 17 08:07:45 Nathan kernel: pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
Mai 17 08:07:45 Nathan kernel: pci 0000:04:03.0: [8086:151a] type 01 class 0x060400
Mai 17 08:07:45 Nathan kernel: pci 0000:04:03.0: supports D1 D2
Mai 17 08:07:45 Nathan kernel: pci 0000:04:03.0: PME# supported from D0 D1 D2 D3hot D3cold
Mai 17 08:07:45 Nathan kernel: pci 0000:04:04.0: [8086:151a] type 01 class 0x060400
Mai 17 08:07:45 Nathan kernel: pci 0000:04:04.0: supports D1 D2
Mai 17 08:07:45 Nathan kernel: pci 0000:04:04.0: PME# supported from D0 D1 D2 D3hot D3cold
Mai 17 08:07:45 Nathan kernel: pci 0000:03:00.0: PCI bridge to [bus 04-67]
Mai 17 08:07:45 Nathan kernel: pci 0000:03:00.0: bridge window [mem 0xa0700000-0xa09fffff]
Mai 17 08:07:45 Nathan kernel: pci 0000:05:00.0: [8086:151a] type 00 class 0x088000
Mai 17 08:07:45 Nathan kernel: pci 0000:05:00.0: reg 10: [mem 0xa0700000-0xa073ffff]
Mai 17 08:07:45 Nathan kernel: pci 0000:05:00.0: reg 14: [mem 0xa0740000-0xa0740fff]
Mai 17 08:07:45 Nathan kernel: pci 0000:05:00.0: supports D1 D2
Mai 17 08:07:45 Nathan kernel: pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
Mai 17 08:07:45 Nathan kernel: pci 0000:04:00.0: PCI bridge to [bus 05]
Mai 17 08:07:45 Nathan kernel: pci 0000:04:00.0: bridge window [mem 0xa0700000-0xa07fffff]
Mai 17 08:07:45 Nathan kernel: pci 0000:04:03.0: PCI bridge to [bus 06-36]
Mai 17 08:07:45 Nathan kernel: pci 0000:04:03.0: bridge window [mem 0xa0800000-0xa08fffff]
Mai 17 08:07:45 Nathan kernel: pci 0000:04:04.0: PCI bridge to [bus 37-67]
Mai 17 08:07:45 Nathan kernel: pci 0000:04:04.0: bridge window [mem 0xa0900000-0xa09fffff]
Mai 17 08:07:45 Nathan kernel: pci 0000:00:1c.0: PCI bridge to [bus 01]
Mai 17 08:07:45 Nathan kernel: pci 0000:00:1c.0: bridge window [mem 0xa0500000-0xa05fffff]
Mai 17 08:07:45 Nathan kernel: pci 0000:02:00.0: [14e4:4353] type 00 class 0x028000
Mai 17 08:07:45 Nathan kernel: pci 0000:02:00.0: reg 10: [mem 0xa0400000-0xa0403fff 64bit]
Mai 17 08:07:45 Nathan kernel: pci 0000:02:00.0: supports D1 D2
Mai 17 08:07:45 Nathan kernel: pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
Mai 17 08:07:45 Nathan kernel: pci 0000:02:00.0: System wakeup disabled by ACPI
Mai 17 08:07:45 Nathan kernel: pci 0000:00:1c.1: PCI bridge to [bus 02]
Mai 17 08:07:45 Nathan kernel: pci 0000:00:1c.1: bridge window [mem 0xa0400000-0xa04fffff]
Mai 17 08:07:45 Nathan kernel: acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d)
Mai 17 08:07:45 Nathan kernel: acpi PNP0A08:00: ACPI _OSC control (0x19) granted
Mai 17 08:07:45 Nathan kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
Mai 17 08:07:45 Nathan kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
Mai 17 08:07:45 Nathan kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
Mai 17 08:07:45 Nathan kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
Mai 17 08:07:45 Nathan kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
Mai 17 08:07:45 Nathan kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
Mai 17 08:07:45 Nathan kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
Mai 17 08:07:45 Nathan kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
Mai 17 08:07:45 Nathan kernel: ACPI: Enabled 3 GPEs in block 00 to 3F
Mai 17 08:07:45 Nathan kernel: acpi root: \_SB_.PCI0 notify handler is installed
Mai 17 08:07:45 Nathan kernel: Found 1 acpi root devices
Mai 17 08:07:45 Nathan kernel: ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
Mai 17 08:07:45 Nathan kernel: ACPI: No dock devices found.
Mai 17 08:07:45 Nathan kernel: vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
Mai 17 08:07:45 Nathan kernel: vgaarb: loaded
Mai 17 08:07:45 Nathan kernel: vgaarb: bridge control possible 0000:00:02.0
Mai 17 08:07:45 Nathan kernel: PCI: Using ACPI for IRQ routing
Mai 17 08:07:45 Nathan kernel: PCI: pci_cache_line_size set to 64 bytes
Mai 17 08:07:45 Nathan kernel: e820: reserve RAM buffer [mem 0x0008e000-0x0008ffff]
Mai 17 08:07:45 Nathan kernel: e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
Mai 17 08:07:45 Nathan kernel: e820: reserve RAM buffer [mem 0x8ad34000-0x8bffffff]
Mai 17 08:07:45 Nathan kernel: e820: reserve RAM buffer [mem 0x16fe00000-0x16fffffff]
Mai 17 08:07:45 Nathan kernel: NetLabel: Initializing
Mai 17 08:07:45 Nathan kernel: NetLabel: domain hash size = 128
Mai 17 08:07:45 Nathan kernel: NetLabel: protocols = UNLABELED CIPSOv4
Mai 17 08:07:45 Nathan kernel: NetLabel: unlabeled traffic allowed by default
Mai 17 08:07:45 Nathan kernel: hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
Mai 17 08:07:45 Nathan kernel: hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Mai 17 08:07:45 Nathan kernel: Switching to clocksource hpet
Mai 17 08:07:45 Nathan kernel: pnp: PnP ACPI init
Mai 17 08:07:45 Nathan kernel: ACPI: bus type PNP registered
Mai 17 08:07:45 Nathan kernel: pnp 00:00: [dma 4]
Mai 17 08:07:45 Nathan kernel: pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
Mai 17 08:07:45 Nathan kernel: pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active)
Mai 17 08:07:45 Nathan kernel: system 00:02: [mem 0xfed00000-0xfed003ff] has been reserved
Mai 17 08:07:45 Nathan kernel: system 00:02: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
Mai 17 08:07:45 Nathan kernel: pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
Mai 17 08:07:45 Nathan kernel: system 00:04: [io 0x1000-0x100f] has been reserved
Mai 17 08:07:45 Nathan kernel: system 00:04: [io 0x0400-0x047f] has been reserved
Mai 17 08:07:45 Nathan kernel: system 00:04: [io 0x0500-0x057f] has been reserved
Mai 17 08:07:45 Nathan kernel: system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
Mai 17 08:07:45 Nathan kernel: pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
Mai 17 08:07:45 Nathan kernel: pnp 00:06: Plug and Play ACPI device, IDs APP0001 (active)
Mai 17 08:07:45 Nathan kernel: system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
Mai 17 08:07:45 Nathan kernel: system 00:07: [mem 0xfed10000-0xfed17fff] could not be reserved
Mai 17 08:07:45 Nathan kernel: system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
Mai 17 08:07:45 Nathan kernel: system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
Mai 17 08:07:45 Nathan kernel: system 00:07: [mem 0xe0000000-0xefffffff] has been reserved
Mai 17 08:07:45 Nathan kernel: system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
Mai 17 08:07:45 Nathan kernel: system 00:07: [mem 0xfed90000-0xfed93fff] has been reserved
Mai 17 08:07:45 Nathan kernel: system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved
Mai 17 08:07:45 Nathan kernel: system 00:07: [mem 0xff000000-0xffffffff] could not be reserved
Mai 17 08:07:45 Nathan kernel: system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
Mai 17 08:07:45 Nathan kernel: system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
Mai 17 08:07:45 Nathan kernel: system 00:08: [mem 0x20000000-0x201fffff] has been reserved
Mai 17 08:07:45 Nathan kernel: system 00:08: [mem 0x40000000-0x401fffff] has been reserved
Mai 17 08:07:45 Nathan kernel: system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
Mai 17 08:07:45 Nathan kernel: pnp: PnP ACPI: found 9 devices
Mai 17 08:07:45 Nathan kernel: ACPI: bus type PNP unregistered
Mai 17 08:07:45 Nathan kernel: pci 0000:04:03.0: bridge window [io 0x1000-0x0fff] to [bus 06-36] add_size 1000
Mai 17 08:07:45 Nathan kernel: pci 0000:04:03.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 06-36] add_size 200000
Mai 17 08:07:45 Nathan kernel: pci 0000:04:04.0: bridge window [io 0x1000-0x0fff] to [bus 37-67] add_size 1000
Mai 17 08:07:45 Nathan kernel: pci 0000:04:04.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 37-67] add_size 200000
Mai 17 08:07:45 Nathan kernel: pci 0000:04:03.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
Mai 17 08:07:45 Nathan kernel: pci 0000:04:04.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
Mai 17 08:07:45 Nathan kernel: pci 0000:03:00.0: bridge window [io 0x1000-0x0fff] to [bus 04-67] add_size 2000
Mai 17 08:07:45 Nathan kernel: pci 0000:04:03.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
Mai 17 08:07:45 Nathan kernel: pci 0000:04:04.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
Mai 17 08:07:45 Nathan kernel: pci 0000:03:00.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04-67] add_size 400000
Mai 17 08:07:45 Nathan kernel: pci 0000:03:00.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 400000
Mai 17 08:07:45 Nathan kernel: pci 0000:03:00.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 2000
Mai 17 08:07:45 Nathan kernel: pci 0000:03:00.0: BAR 15: assigned [mem 0xa4a00000-0xa4dfffff 64bit pref]
Mai 17 08:07:45 Nathan kernel: pci 0000:03:00.0: BAR 13: can't assign io (size 0x2000)
Mai 17 08:07:45 Nathan kernel: pci 0000:03:00.0: BAR 15: assigned [mem 0xa4a00000-0xa4dfffff 64bit pref]
Mai 17 08:07:45 Nathan kernel: pci 0000:03:00.0: BAR 13: can't assign io (size 0x2000)
Mai 17 08:07:45 Nathan kernel: pci 0000:04:03.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
Mai 17 08:07:45 Nathan kernel: pci 0000:04:04.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
Mai 17 08:07:45 Nathan kernel: pci 0000:04:03.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
Mai 17 08:07:45 Nathan kernel: pci 0000:04:04.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
Mai 17 08:07:45 Nathan kernel: pci 0000:04:03.0: BAR 15: assigned [mem 0xa4a00000-0xa4bfffff 64bit pref]
Mai 17 08:07:45 Nathan kernel: pci 0000:04:04.0: BAR 15: assigned [mem 0xa4c00000-0xa4dfffff 64bit pref]
Mai 17 08:07:45 Nathan kernel: pci 0000:04:03.0: BAR 13: can't assign io (size 0x1000)
Mai 17 08:07:45 Nathan kernel: pci 0000:04:04.0: BAR 13: can't assign io (size 0x1000)
Mai 17 08:07:45 Nathan kernel: pci 0000:04:04.0: BAR 15: assigned [mem 0xa4a00000-0xa4bfffff 64bit pref]
Mai 17 08:07:45 Nathan kernel: pci 0000:04:04.0: BAR 13: can't assign io (size 0x1000)
Mai 17 08:07:45 Nathan kernel: pci 0000:04:03.0: BAR 15: assigned [mem 0xa4c00000-0xa4dfffff 64bit pref]
Mai 17 08:07:45 Nathan kernel: pci 0000:04:03.0: BAR 13: can't assign io (size 0x1000)
Mai 17 08:07:45 Nathan kernel: pci 0000:04:00.0: PCI bridge to [bus 05]
Mai 17 08:07:45 Nathan kernel: pci 0000:04:00.0: bridge window [mem 0xa0700000-0xa07fffff]
Mai 17 08:07:45 Nathan kernel: pci 0000:04:03.0: PCI bridge to [bus 06-36]
Mai 17 08:07:45 Nathan kernel: pci 0000:04:03.0: bridge window [mem 0xa0800000-0xa08fffff]
Mai 17 08:07:45 Nathan kernel: pci 0000:04:03.0: bridge window [mem 0xa4c00000-0xa4dfffff 64bit pref]
Mai 17 08:07:45 Nathan kernel: pci 0000:04:04.0: PCI bridge to [bus 37-67]
Mai 17 08:07:45 Nathan kernel: pci 0000:04:04.0: bridge window [mem 0xa0900000-0xa09fffff]
Mai 17 08:07:45 Nathan kernel: pci 0000:04:04.0: bridge window [mem 0xa4a00000-0xa4bfffff 64bit pref]
Mai 17 08:07:45 Nathan kernel: pci 0000:03:00.0: PCI bridge to [bus 04-67]
Mai 17 08:07:45 Nathan kernel: pci 0000:03:00.0: bridge window [mem 0xa0700000-0xa09fffff]
Mai 17 08:07:45 Nathan kernel: pci 0000:03:00.0: bridge window [mem 0xa4a00000-0xa4dfffff 64bit pref]
Mai 17 08:07:45 Nathan kernel: pci 0000:00:01.0: PCI bridge to [bus 03-97]
Mai 17 08:07:45 Nathan kernel: pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
Mai 17 08:07:45 Nathan kernel: pci 0000:00:01.0: bridge window [mem 0xa0700000-0xa49fffff]
Mai 17 08:07:45 Nathan kernel: pci 0000:00:01.0: bridge window [mem 0xa4a00000-0xa89fffff 64bit pref]
Mai 17 08:07:45 Nathan kernel: pci 0000:00:1c.0: PCI bridge to [bus 01]
Mai 17 08:07:45 Nathan kernel: pci 0000:00:1c.0: bridge window [mem 0xa0500000-0xa05fffff]
Mai 17 08:07:45 Nathan kernel: pci 0000:00:1c.1: PCI bridge to [bus 02]
Mai 17 08:07:45 Nathan kernel: pci 0000:00:1c.1: bridge window [mem 0xa0400000-0xa04fffff]
Mai 17 08:07:45 Nathan kernel: pci 0000:04:03.0: enabling device (0000 -> 0002)
Mai 17 08:07:45 Nathan kernel: pci 0000:04:04.0: enabling device (0000 -> 0002)
Mai 17 08:07:45 Nathan kernel: pci 0000:00:1c.0: enabling device (0000 -> 0002)
Mai 17 08:07:45 Nathan kernel: pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
Mai 17 08:07:45 Nathan kernel: pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
Mai 17 08:07:45 Nathan kernel: pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
Mai 17 08:07:45 Nathan kernel: pci_bus 0000:00: resource 7 [mem 0x8fa00000-0xfeafffff]
Mai 17 08:07:45 Nathan kernel: pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff]
Mai 17 08:07:45 Nathan kernel: pci_bus 0000:03: resource 0 [io 0x3000-0x3fff]
Mai 17 08:07:45 Nathan kernel: pci_bus 0000:03: resource 1 [mem 0xa0700000-0xa49fffff]
Mai 17 08:07:45 Nathan kernel: pci_bus 0000:03: resource 2 [mem 0xa4a00000-0xa89fffff 64bit pref]
Mai 17 08:07:45 Nathan kernel: pci_bus 0000:04: resource 1 [mem 0xa0700000-0xa09fffff]
Mai 17 08:07:45 Nathan kernel: pci_bus 0000:04: resource 2 [mem 0xa4a00000-0xa4dfffff 64bit pref]
Mai 17 08:07:45 Nathan kernel: pci_bus 0000:05: resource 1 [mem 0xa0700000-0xa07fffff]
Mai 17 08:07:45 Nathan kernel: pci_bus 0000:06: resource 1 [mem 0xa0800000-0xa08fffff]
Mai 17 08:07:45 Nathan kernel: pci_bus 0000:06: resource 2 [mem 0xa4c00000-0xa4dfffff 64bit pref]
Mai 17 08:07:45 Nathan kernel: pci_bus 0000:37: resource 1 [mem 0xa0900000-0xa09fffff]
Mai 17 08:07:45 Nathan kernel: pci_bus 0000:37: resource 2 [mem 0xa4a00000-0xa4bfffff 64bit pref]
Mai 17 08:07:45 Nathan kernel: pci_bus 0000:01: resource 1 [mem 0xa0500000-0xa05fffff]
Mai 17 08:07:45 Nathan kernel: pci_bus 0000:02: resource 1 [mem 0xa0400000-0xa04fffff]
Mai 17 08:07:45 Nathan kernel: NET: Registered protocol family 2
Mai 17 08:07:45 Nathan kernel: TCP established hash table entries: 32768 (order: 7, 524288 bytes)
Mai 17 08:07:45 Nathan kernel: TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
Mai 17 08:07:45 Nathan kernel: TCP: Hash tables configured (established 32768 bind 32768)
Mai 17 08:07:45 Nathan kernel: TCP: reno registered
Mai 17 08:07:45 Nathan kernel: UDP hash table entries: 2048 (order: 4, 65536 bytes)
Mai 17 08:07:45 Nathan kernel: UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
Mai 17 08:07:45 Nathan kernel: NET: Registered protocol family 1
Mai 17 08:07:45 Nathan kernel: pci 0000:00:02.0: Boot video device
Mai 17 08:07:45 Nathan kernel: PCI: CLS 256 bytes, default 64
Mai 17 08:07:45 Nathan kernel: Unpacking initramfs...
Mai 17 08:07:45 Nathan kernel: Freeing initrd memory: 2868k freed
Mai 17 08:07:45 Nathan kernel: PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Mai 17 08:07:45 Nathan kernel: software IO TLB [mem 0x86d34000-0x8ad34000] (64MB) mapped at [ffff880086d34000-ffff88008ad33fff]
Mai 17 08:07:45 Nathan kernel: Scanning for low memory corruption every 60 seconds
Mai 17 08:07:45 Nathan kernel: audit: initializing netlink socket (disabled)
Mai 17 08:07:45 Nathan kernel: type=2000 audit(1368770861.326:1): initialized
Mai 17 08:07:45 Nathan kernel: HugeTLB registered 2 MB page size, pre-allocated 0 pages
Mai 17 08:07:45 Nathan kernel: VFS: Disk quotas dquot_6.5.2
Mai 17 08:07:45 Nathan kernel: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Mai 17 08:07:45 Nathan kernel: msgmni has been set to 7730
Mai 17 08:07:45 Nathan kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
Mai 17 08:07:45 Nathan kernel: io scheduler noop registered
Mai 17 08:07:45 Nathan kernel: io scheduler deadline registered
Mai 17 08:07:45 Nathan kernel: io scheduler cfq registered (default)
Mai 17 08:07:45 Nathan kernel: pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
Mai 17 08:07:45 Nathan kernel: pcieport 0000:03:00.0: irq 41 for MSI/MSI-X
Mai 17 08:07:45 Nathan kernel: pcieport 0000:04:00.0: irq 42 for MSI/MSI-X
Mai 17 08:07:45 Nathan kernel: pcieport 0000:04:03.0: irq 43 for MSI/MSI-X
Mai 17 08:07:45 Nathan kernel: pcieport 0000:04:04.0: irq 44 for MSI/MSI-X
Mai 17 08:07:45 Nathan kernel: vesafb: mode is 1024x768x32, linelength=4096, pages=0
Mai 17 08:07:45 Nathan kernel: vesafb: scrolling: redraw
Mai 17 08:07:45 Nathan kernel: vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Mai 17 08:07:45 Nathan kernel: vesafb: framebuffer at 0x90000000, mapped to 0xffffc9000a000000, using 3072k, total 3072k
Mai 17 08:07:45 Nathan kernel: Console: switching to colour frame buffer device 128x48
Mai 17 08:07:45 Nathan kernel: fb0: VESA VGA frame buffer device
Mai 17 08:07:45 Nathan kernel: intel_idle: MWAIT substates: 0x21120
Mai 17 08:07:45 Nathan kernel: intel_idle: v0.4 model 0x2A
Mai 17 08:07:45 Nathan kernel: intel_idle: lapic_timer_reliable_states 0xffffffff
Mai 17 08:07:45 Nathan kernel: GHES: HEST is not enabled!
Mai 17 08:07:45 Nathan kernel: Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
Mai 17 08:07:45 Nathan kernel: Linux agpgart interface v0.103
Mai 17 08:07:45 Nathan kernel: i8042: PNP: No PS/2 controller found. Probing ports directly.
Mai 17 08:07:45 Nathan kernel: tsc: Refined TSC clocksource calibration: 1700.009 MHz
Mai 17 08:07:45 Nathan kernel: Switching to clocksource tsc
Mai 17 08:07:45 Nathan kernel: i8042: No controller found
Mai 17 08:07:45 Nathan kernel: mousedev: PS/2 mouse device common for all mice
Mai 17 08:07:45 Nathan kernel: rtc_cmos 00:05: RTC can wake from S4
Mai 17 08:07:45 Nathan kernel: rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
Mai 17 08:07:45 Nathan kernel: rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
Mai 17 08:07:45 Nathan kernel: Intel P-state driver initializing.
Mai 17 08:07:45 Nathan kernel: Intel pstate controlling: cpu 0
Mai 17 08:07:45 Nathan kernel: Intel pstate controlling: cpu 1
Mai 17 08:07:45 Nathan kernel: Intel pstate controlling: cpu 2
Mai 17 08:07:45 Nathan kernel: Intel pstate controlling: cpu 3
Mai 17 08:07:45 Nathan kernel: cpuidle: using governor ladder
Mai 17 08:07:45 Nathan kernel: cpuidle: using governor menu
Mai 17 08:07:45 Nathan kernel: EFI Variables Facility v0.08 2004-May-17
Mai 17 08:07:45 Nathan kernel: drop_monitor: Initializing network drop monitor service
Mai 17 08:07:45 Nathan kernel: TCP: cubic registered
Mai 17 08:07:45 Nathan kernel: NET: Registered protocol family 10
Mai 17 08:07:45 Nathan kernel: NET: Registered protocol family 17
Mai 17 08:07:45 Nathan kernel: Key type dns_resolver registered
Mai 17 08:07:45 Nathan kernel: PM: Hibernation image not present or could not be loaded.
Mai 17 08:07:45 Nathan kernel: registered taskstats version 1
Mai 17 08:07:45 Nathan kernel: Magic number: 13:967:114
Mai 17 08:07:45 Nathan kernel: Freeing unused kernel memory: 1092k freed
Mai 17 08:07:45 Nathan kernel: Write protecting the kernel read-only data: 8192k
Mai 17 08:07:45 Nathan kernel: Freeing unused kernel memory: 1152k freed
Mai 17 08:07:45 Nathan kernel: Freeing unused kernel memory: 420k freed
Mai 17 08:07:45 Nathan systemd-udevd[56]: starting version 203
Mai 17 08:07:45 Nathan kernel: ACPI: bus type USB registered
Mai 17 08:07:45 Nathan kernel: usbcore: registered new interface driver usbfs
Mai 17 08:07:45 Nathan kernel: usbcore: registered new interface driver hub
Mai 17 08:07:45 Nathan kernel: usbcore: registered new device driver usb
Mai 17 08:07:45 Nathan kernel: SCSI subsystem initialized
Mai 17 08:07:45 Nathan kernel: ACPI: bus type ATA registered
Mai 17 08:07:45 Nathan kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Mai 17 08:07:45 Nathan kernel: libata version 3.00 loaded.
Mai 17 08:07:45 Nathan kernel: ehci-pci: EHCI PCI platform driver
Mai 17 08:07:45 Nathan kernel: uhci_hcd: USB Universal Host Controller Interface driver
Mai 17 08:07:45 Nathan kernel: ehci-pci 0000:00:1a.7: setting latency timer to 64
Mai 17 08:07:45 Nathan kernel: ehci-pci 0000:00:1a.7: EHCI Host Controller
Mai 17 08:07:45 Nathan kernel: ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
Mai 17 08:07:45 Nathan kernel: ehci-pci 0000:00:1a.7: debug port 2
Mai 17 08:07:45 Nathan kernel: ehci-pci 0000:00:1a.7: cache line size of 256 is not supported
Mai 17 08:07:45 Nathan kernel: ehci-pci 0000:00:1a.7: irq 23, io mem 0xa0606c00
Mai 17 08:07:45 Nathan kernel: ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
Mai 17 08:07:45 Nathan kernel: hub 1-0:1.0: USB hub found
Mai 17 08:07:45 Nathan kernel: hub 1-0:1.0: 6 ports detected
Mai 17 08:07:45 Nathan kernel: ehci-pci 0000:00:1d.7: setting latency timer to 64
Mai 17 08:07:45 Nathan kernel: ehci-pci 0000:00:1d.7: EHCI Host Controller
Mai 17 08:07:45 Nathan kernel: ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
Mai 17 08:07:45 Nathan kernel: ehci-pci 0000:00:1d.7: debug port 2
Mai 17 08:07:45 Nathan kernel: ehci-pci 0000:00:1d.7: cache line size of 256 is not supported
Mai 17 08:07:45 Nathan kernel: ehci-pci 0000:00:1d.7: irq 22, io mem 0xa0606800
Mai 17 08:07:45 Nathan kernel: ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
Mai 17 08:07:45 Nathan kernel: hub 2-0:1.0: USB hub found
Mai 17 08:07:45 Nathan kernel: hub 2-0:1.0: 8 ports detected
Mai 17 08:07:45 Nathan kernel: ata_piix 0000:00:1f.2: version 2.13
Mai 17 08:07:45 Nathan kernel: ata_piix 0000:00:1f.2: MAP [
Mai 17 08:07:45 Nathan kernel: P0 P2 P1 P3 ]
Mai 17 08:07:45 Nathan kernel: ata_piix 0000:00:1f.2: setting latency timer to 64
Mai 17 08:07:45 Nathan kernel: scsi0 : ata_piix
Mai 17 08:07:45 Nathan kernel: scsi1 : ata_piix
Mai 17 08:07:45 Nathan kernel: ata1: SATA max UDMA/133 cmd 0x2168 ctl 0x217c bmdma 0x2060 irq 19
Mai 17 08:07:45 Nathan kernel: ata2: SATA max UDMA/133 cmd 0x2160 ctl 0x2178 bmdma 0x2068 irq 19
Mai 17 08:07:45 Nathan kernel: uhci_hcd 0000:00:1a.0: setting latency timer to 64
Mai 17 08:07:45 Nathan kernel: uhci_hcd 0000:00:1a.0: UHCI Host Controller
Mai 17 08:07:45 Nathan kernel: uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
Mai 17 08:07:45 Nathan kernel: uhci_hcd 0000:00:1a.0: irq 21, io base 0x00002140
Mai 17 08:07:45 Nathan kernel: hub 3-0:1.0: USB hub found
Mai 17 08:07:45 Nathan kernel: hub 3-0:1.0: 2 ports detected
Mai 17 08:07:45 Nathan kernel: uhci_hcd 0000:00:1d.0: setting latency timer to 64
Mai 17 08:07:45 Nathan kernel: uhci_hcd 0000:00:1d.0: UHCI Host Controller
Mai 17 08:07:45 Nathan kernel: uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
Mai 17 08:07:45 Nathan kernel: uhci_hcd 0000:00:1d.0: irq 19, io base 0x000020e0
Mai 17 08:07:45 Nathan kernel: hub 4-0:1.0: USB hub found
Mai 17 08:07:45 Nathan kernel: hub 4-0:1.0: 2 ports detected
Mai 17 08:07:45 Nathan kernel: usb 1-1: new high-speed USB device number 2 using ehci-pci
Mai 17 08:07:45 Nathan kernel: hub 1-1:1.0: USB hub found
Mai 17 08:07:45 Nathan kernel: hub 1-1:1.0: 3 ports detected
Mai 17 08:07:45 Nathan kernel: usb 1-2: new high-speed USB device number 3 using ehci-pci
Mai 17 08:07:45 Nathan kernel: usb 2-1: new high-speed USB device number 2 using ehci-pci
Mai 17 08:07:45 Nathan kernel: hub 2-1:1.0: USB hub found
Mai 17 08:07:45 Nathan kernel: hub 2-1:1.0: 2 ports detected
Mai 17 08:07:45 Nathan kernel: usb 1-1.1: new full-speed USB device number 4 using ehci-pci
Mai 17 08:07:45 Nathan kernel: hub 1-1.1:1.0: USB hub found
Mai 17 08:07:45 Nathan kernel: hub 1-1.1:1.0: 3 ports detected
Mai 17 08:07:45 Nathan kernel: usb 1-1.2: new full-speed USB device number 5 using ehci-pci
Mai 17 08:07:45 Nathan kernel: ata2.00: failed to resume link (SControl 0)
Mai 17 08:07:45 Nathan kernel: hidraw: raw HID events driver (C) Jiri Kosina
Mai 17 08:07:45 Nathan kernel: usbcore: registered new interface driver usbhid
Mai 17 08:07:45 Nathan kernel: usbhid: USB HID core driver
Mai 17 08:07:45 Nathan kernel: input: Apple Inc. Apple Internal Keyboard / Trackpad as /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1.2/1-1.2:1.0/input/input0
Mai 17 08:07:45 Nathan kernel: apple 0003:05AC:024D.0001: input,hidraw0: USB HID v1.11 Keyboard [Apple Inc. Apple Internal Keyboard / Trackpad] on usb-0000:00:1a.7-1.2/input0
Mai 17 08:07:45 Nathan kernel: usb 2-1.1: new high-speed USB device number 3 using ehci-pci
Mai 17 08:07:45 Nathan kernel: apple 0003:05AC:024D.0002: hidraw1: USB HID v1.11 Device [Apple Inc. Apple Internal Keyboard / Trackpad] on usb-0000:00:1a.7-1.2/input1
Mai 17 08:07:45 Nathan kernel: Initializing USB Mass Storage driver...
Mai 17 08:07:45 Nathan kernel: scsi2 : usb-storage 2-1.1:1.0
Mai 17 08:07:45 Nathan kernel: usbcore: registered new interface driver usb-storage
Mai 17 08:07:45 Nathan kernel: USB Mass Storage support registered.
Mai 17 08:07:45 Nathan kernel: ata1.01: failed to resume link (SControl 0)
Mai 17 08:07:45 Nathan kernel: usb 1-1.1.1: new full-speed USB device number 6 using ehci-pci
Mai 17 08:07:45 Nathan kernel: ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Mai 17 08:07:45 Nathan kernel: ata1.01: SATA link down (SStatus 0 SControl 0)
Mai 17 08:07:45 Nathan kernel: ata1.00: ATA-8: APPLE SSD SM128C, AXM09A1Q, max UDMA/133
Mai 17 08:07:45 Nathan kernel: ata1.00: 236978176 sectors, multi 16: LBA48 NCQ (depth 0/32)
Mai 17 08:07:45 Nathan kernel: usb 1-1.1.2: new full-speed USB device number 7 using ehci-pci
Mai 17 08:07:45 Nathan kernel: ata1.00: configured for UDMA/133
Mai 17 08:07:45 Nathan kernel: scsi 0:0:0:0: Direct-Access ATA APPLE SSD SM128C AXM0 PQ: 0 ANSI: 5
Mai 17 08:07:45 Nathan kernel: usb 1-1.1.3: new full-speed USB device number 8 using ehci-pci
Mai 17 08:07:45 Nathan kernel: ata2.01: failed to resume link (SControl 0)
Mai 17 08:07:45 Nathan kernel: ata2.00: SATA link down (SStatus 0 SControl 0)
Mai 17 08:07:45 Nathan kernel: ata2.01: SATA link down (SStatus 0 SControl 0)
Mai 17 08:07:45 Nathan kernel: sd 0:0:0:0: [sda] 236978176 512-byte logical blocks: (121 GB/113 GiB)
Mai 17 08:07:45 Nathan kernel: sd 0:0:0:0: [sda] Write Protect is off
Mai 17 08:07:45 Nathan kernel: sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Mai 17 08:07:45 Nathan kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Mai 17 08:07:45 Nathan kernel: sda: sda1 sda2
Mai 17 08:07:45 Nathan kernel: sd 0:0:0:0: [sda] Attached SCSI disk
Mai 17 08:07:45 Nathan kernel: EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
Mai 17 08:07:45 Nathan systemd[1]: systemd 204 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
Mai 17 08:07:45 Nathan systemd[1]: Set hostname to <Nathan>.
Mai 17 08:07:45 Nathan kernel: scsi 2:0:0:0: Direct-Access APPLE SD Card Reader 2.00 PQ: 0 ANSI: 0
Mai 17 08:07:45 Nathan kernel: sd 2:0:0:0: [sdb] Attached SCSI removable disk
Mai 17 08:07:45 Nathan systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory. See system logs and 'systemctl status display-manager.service' for details.
Mai 17 08:07:45 Nathan systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
Mai 17 08:07:45 Nathan systemd[1]: Started Forward Password Requests to Wall Directory Watch.
Mai 17 08:07:45 Nathan systemd[1]: Starting Remote File Systems.
Mai 17 08:07:45 Nathan systemd[1]: Reached target Remote File Systems.
Mai 17 08:07:45 Nathan systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
Mai 17 08:07:45 Nathan systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
Mai 17 08:07:45 Nathan systemd[1]: Starting Device-mapper event daemon FIFOs.
Mai 17 08:07:45 Nathan systemd[1]: Listening on Device-mapper event daemon FIFOs.
Mai 17 08:07:45 Nathan systemd[1]: Starting LVM2 metadata daemon socket.
Mai 17 08:07:45 Nathan systemd[1]: Listening on LVM2 metadata daemon socket.
Mai 17 08:07:45 Nathan systemd[1]: Starting Delayed Shutdown Socket.
Mai 17 08:07:45 Nathan systemd[1]: Listening on Delayed Shutdown Socket.
Mai 17 08:07:45 Nathan systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
Mai 17 08:07:45 Nathan systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
Mai 17 08:07:45 Nathan systemd[1]: Starting Encrypted Volumes.
Mai 17 08:07:45 Nathan systemd[1]: Reached target Encrypted Volumes.
Mai 17 08:07:45 Nathan systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
Mai 17 08:07:45 Nathan systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
Mai 17 08:07:45 Nathan systemd[1]: Starting Paths.
Mai 17 08:07:45 Nathan systemd[1]: Reached target Paths.
Mai 17 08:07:45 Nathan systemd[1]: Starting Journal Socket.
Mai 17 08:07:45 Nathan systemd[1]: Listening on Journal Socket.
Mai 17 08:07:45 Nathan systemd[1]: Mounting Debug File System...
Mai 17 08:07:45 Nathan systemd[1]: Started Set Up Additional Binary Formats.
Mai 17 08:07:45 Nathan systemd[1]: Starting Setup Virtual Console...
Mai 17 08:07:45 Nathan systemd[1]: Starting Apply Kernel Variables...
Mai 17 08:07:45 Nathan systemd[1]: Mounting Huge Pages File System...
Mai 17 08:07:45 Nathan systemd[1]: Mounting POSIX Message Queue File System...
Mai 17 08:07:45 Nathan systemd[1]: Starting Load Kernel Modules...
Mai 17 08:07:45 Nathan systemd[1]: Starting Create static device nodes in /dev...
Mai 17 08:07:45 Nathan systemd[1]: Starting Journal Service...
Mai 17 08:07:45 Nathan systemd[1]: Started Journal Service.
Mai 17 08:07:45 Nathan systemd[1]: Starting udev Kernel Socket.
Mai 17 08:07:45 Nathan systemd[1]: Listening on udev Kernel Socket.
Mai 17 08:07:45 Nathan systemd[1]: Starting udev Control Socket.
Mai 17 08:07:45 Nathan systemd[1]: Listening on udev Control Socket.
Mai 17 08:07:45 Nathan systemd[1]: Starting udev Coldplug all Devices...
Mai 17 08:07:45 Nathan systemd[1]: Starting Swap.
Mai 17 08:07:45 Nathan systemd[1]: Reached target Swap.
Mai 17 08:07:45 Nathan systemd[1]: Started File System Check on Root Device.
Mai 17 08:07:45 Nathan systemd[1]: Starting Remount Root and Kernel File Systems...
Mai 17 08:07:45 Nathan systemd[1]: Mounting Temporary Directory...
Mai 17 08:07:45 Nathan systemd[1]: Expecting device dev-disk-by\x2duuid-168d8e59\x2db7eb\x2d4af3\x2da286\x2dddb662307a59.device...
Mai 17 08:07:45 Nathan kernel: cfg80211: Calling CRDA to update world regulatory domain
Mai 17 08:07:45 Nathan systemd-udevd[120]: starting version 204
Mai 17 08:07:45 Nathan kernel: lib80211: common routines for IEEE802.11 drivers
Mai 17 08:07:45 Nathan kernel: lib80211_crypt: registered algorithm 'NULL'
Mai 17 08:07:45 Nathan systemd-journal[113]: Journal started
Mai 17 08:07:45 Nathan systemd-sysctl[108]: Duplicate assignment of kernel/sysrq in file '/usr/lib/sysctl.d/50-default.conf', ignoring.
Mai 17 08:07:45 Nathan systemd[1]: Started Apply Kernel Variables.
Mai 17 08:07:45 Nathan systemd[1]: Started Create static device nodes in /dev.
Mai 17 08:07:45 Nathan systemd[1]: Starting udev Kernel Device Manager...
Mai 17 08:07:45 Nathan systemd[1]: Started udev Kernel Device Manager.
Mai 17 08:07:45 Nathan systemd[1]: Started udev Coldplug all Devices.
Mai 17 08:07:45 Nathan systemd[1]: Mounted Debug File System.
Mai 17 08:07:45 Nathan systemd[1]: Mounted Temporary Directory.
Mai 17 08:07:45 Nathan kernel: wl: module license 'Mixed/Proprietary' taints kernel.
Mai 17 08:07:45 Nathan kernel: Disabling lock debugging due to kernel taint
Mai 17 08:07:45 Nathan kernel: input: PC Speaker as /devices/platform/pcspkr/input/input1
Mai 17 08:07:45 Nathan kernel: ACPI: Requesting acpi_cpufreq
Mai 17 08:07:45 Nathan kernel: INFO @wl_cfg80211_attach : Registered CFG80211 phy
Mai 17 08:07:45 Nathan kernel: ACPI: AC Adapter [ADP1] (on-line)
Mai 17 08:07:45 Nathan kernel: input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
Mai 17 08:07:45 Nathan kernel: ACPI: Lid Switch [LID0]
Mai 17 08:07:45 Nathan kernel: input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
Mai 17 08:07:45 Nathan kernel: ACPI: Power Button [PWRB]
Mai 17 08:07:45 Nathan kernel: input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input4
Mai 17 08:07:45 Nathan kernel: ACPI: Sleep Button [SLPB]
Mai 17 08:07:45 Nathan systemd[1]: Mounted Huge Pages File System.
Mai 17 08:07:45 Nathan systemd[1]: Mounted POSIX Message Queue File System.
Mai 17 08:07:45 Nathan kernel: ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20130117/utaddress-251)
Mai 17 08:07:45 Nathan kernel: ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
Mai 17 08:07:45 Nathan kernel: ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \GPIO 1 (20130117/utaddress-251)
Mai 17 08:07:45 Nathan kernel: ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
Mai 17 08:07:45 Nathan kernel: ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20130117/utaddress-251)
Mai 17 08:07:45 Nathan kernel: ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
Mai 17 08:07:45 Nathan kernel: ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20130117/utaddress-251)
Mai 17 08:07:45 Nathan kernel: ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
Mai 17 08:07:45 Nathan kernel: lpc_ich: Resource conflict(s) found affecting gpio_ich
Mai 17 08:07:45 Nathan kernel: input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
Mai 17 08:07:45 Nathan kernel: ACPI: Power Button [PWRF]
Mai 17 08:07:45 Nathan systemd[1]: Started Remount Root and Kernel File Systems.
Mai 17 08:07:45 Nathan systemd[1]: Starting Local File Systems (Pre).
Mai 17 08:07:45 Nathan systemd[1]: Reached target Local File Systems (Pre).
Mai 17 08:07:45 Nathan systemd[1]: Starting Load Random Seed...
Mai 17 08:07:45 Nathan kernel: EXT4-fs (sda1): re-mounted. Opts: data=ordered
Mai 17 08:07:45 Nathan systemd[1]: Started Load Random Seed.
Mai 17 08:07:45 Nathan kernel: ACPI Warning: 0x000000000000efa0-0x000000000000efbf SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20130117/utaddress-251)
Mai 17 08:07:45 Nathan kernel: ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
Mai 17 08:07:45 Nathan kernel: microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x1a
Mai 17 08:07:45 Nathan systemd-modules-load[111]: Inserted module 'wl'
Mai 17 08:07:45 Nathan systemd[1]: Started Load Kernel Modules.
Mai 17 08:07:45 Nathan systemd[1]: Mounted FUSE Control File System.
Mai 17 08:07:45 Nathan systemd[1]: Mounting Configuration File System...
Mai 17 08:07:45 Nathan kernel: lib80211_crypt: registered algorithm 'TKIP'
Mai 17 08:07:45 Nathan kernel: eth0: Broadcom BCM4353 802.11 Hybrid Wireless Controller 5.100.82.112
Mai 17 08:07:45 Nathan kernel: [drm] Initialized drm 1.1.0 20060810
Mai 17 08:07:45 Nathan kernel: mei 0000:00:16.0: setting latency timer to 64
Mai 17 08:07:45 Nathan kernel: mei 0000:00:16.0: irq 45 for MSI/MSI-X
Mai 17 08:07:45 Nathan systemd[1]: Mounted Configuration File System.
Mai 17 08:07:45 Nathan kernel: microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x1a
Mai 17 08:07:45 Nathan kernel: microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x1a
Mai 17 08:07:45 Nathan kernel: microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x1a
Mai 17 08:07:45 Nathan kernel: microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
Mai 17 08:07:45 Nathan systemd[1]: Found device APPLE_SSD_SM128C.
Mai 17 08:07:45 Nathan systemd[1]: Starting File System Check on /dev/disk/by-uuid/168d8e59-b7eb-4af3-a286-ddb662307a59...
Mai 17 08:07:45 Nathan kernel: ACPI: Battery Slot [BAT0] (battery present)
Mai 17 08:07:45 Nathan kernel: snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
Mai 17 08:07:45 Nathan systemd[1]: Started Setup Virtual Console.
Mai 17 08:07:45 Nathan kernel: input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
Mai 17 08:07:45 Nathan kernel: input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
Mai 17 08:07:45 Nathan kernel: input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
Mai 17 08:07:45 Nathan kernel: input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
Mai 17ewaller wrote:For the record, drm and EDID both have to do with your display system and have nothing do to with networking.drm is Direct Rendering M... Okay, I don't know what the M means. (not to be confused with Digital Rights Management)
EDID is Extended Display Identification Data, information stored about you display's capabilities and geometry that are read by the video driver so provide automatic configuration. The checksum error meant that there were inconsistencies in the data read. No idea why.
Edit,
Oh, and welcome to Arch
Thank you for the info and for the welcome. I will read more about EDID and drm.
WonderWoofy wrote:I would also like to extend a welcome to the Arch forums and community.
With journalctl, you have certainly discovered a powerful debugging tool. It will no doublt come in handy along your learning adventures here.
I will admit being very impressed by your use of code tags in a first post as a new Arch Linux user. Bravo sir!
Thank you also for your welcome and your advises. I saw from other posts that the people here use some special style of representing code, so I searched a bit and clicked here and there and clicked on the BBCode link below the 'Quick post'-window and voila found the help site of the forum.
Unfortunately, the errors came back this morning:
Mai 18 08:22:29 Nathan kernel: [drm:intel_dp_aux_wait_done] *ERROR* dp aux hw did not signal timeout (has irq: 1)!
Mai 18 08:22:29 Nathan kernel: [drm:intel_dp_aux_wait_done] *ERROR* dp aux hw did not signal timeout (has irq: 1)!
Mai 18 08:22:29 Nathan kernel: iTCO_vendor_support: vendor-support=0
Mai 18 08:22:29 Nathan kernel: iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
Mai 18 08:22:29 Nathan kernel: iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
Mai 18 08:22:29 Nathan systemd-udevd[139]: renamed network interface eth0 to wlp2s0
Mai 18 08:22:29 Nathan systemd-sysctl[590]: Duplicate assignment of kernel/sysrq in file '/usr/lib/sysctl.d/50-default.conf', ignoring.
Mai 18 08:22:29 Nathan kernel: [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 250
Mai 18 08:22:29 Nathan kernel: Raw EDID:
Mai 18 08:22:29 Nathan kernel: 00 ff ff ff ff ff ff 00 10 df 9c 00 00 00 00 1a
Mai 18 08:22:29 Nathan kernel: 15 01 04 95 1d 12 78 02 ef 05 97 57 54 92 27 22
Mai 18 08:22:29 Nathan kernel: 50 54 00 00 00 01 01 01 01 01 01 01 01 01 01 01
Mai 18 08:22:29 Nathan kernel: 01 01 01 01 01 c2 23 a0 d4 50 84 1a 30 40 2a 36
Mai 18 08:22:29 Nathan kernel: 00 1e b3 10 00 00 18 00 00 00 10 00 00 00 00 00
Mai 18 08:22:29 Nathan kernel: iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
Mai 18 08:22:29 Nathan systemd-udevd[139]: renamed network interface eth0 to wlp2s0
Mai 18 08:22:29 Nathan systemd-sysctl[590]: Duplicate assignment of kernel/sysrq in file '/usr/lib/sysctl.d/50-default.conf', ignoring.
Mai 18 08:22:29 Nathan kernel: [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 250
Mai 18 08:22:29 Nathan kernel: Raw EDID:
Mai 18 08:22:29 Nathan kernel: 00 ff ff ff ff ff ff 00 10 df 9c 00 00 00 00 1a
Mai 18 08:22:29 Nathan kernel: 15 01 04 95 1d 12 78 02 ef 05 97 57 54 92 27 22
Mai 18 08:22:29 Nathan kernel: 50 54 00 00 00 01 01 01 01 01 01 01 01 01 01 01
Mai 18 08:22:29 Nathan kernel: 01 01 01 01 01 c2 23 a0 d4 50 84 1a 30 40 2a 36
Mai 18 08:22:29 Nathan kernel: 00 1e b3 10 00 00 18 00 00 00 10 00 00 00 00 00
Mai 18 08:22:29 Nathan kernel: 00 00 00 00 00 00 00 00 00 00 00 00 fe 00 4c 50
Mai 18 08:22:29 Nathan kernel: 31 33 33 57 50 31 2d 54 4a 41 33 00 00 00 fc 00
Mai 18 08:22:29 Nathan kernel: 43 6f 6c 6f 72 20 4c 43 44 0a 20 20 20 00 7e 00
Mai 18 08:22:29 Nathan kernel: usb 1-1.1.2: USB disconnect, device number 7
Mai 18 08:22:29 Nathan kernel: [drm:intel_dp_aux_wait_done] *ERROR* dp aux hw did not signal timeout (has irq: 1)!
Mai 18 08:22:29 Nathan systemd-logind[335]: Watching system buttons on /dev/input/event1 (Lid Switch)
Mai 18 08:22:29 Nathan systemd-logind[335]: Watching system buttons on /dev/input/event2 (Power Button)
Mai 18 08:22:29 Nathan systemd[1]: Starting Bluetooth.
Mai 18 08:22:29 Nathan systemd[1]: Reached target Bluetooth.
Mai 18 08:22:29 Nathan systemd-logind[335]: Watching system buttons on /dev/input/event3 (Sleep Button)
Mai 18 08:22:29 Nathan systemd-logind[335]: Watching system buttons on /dev/input/event4 (Power Button)
Mai 18 08:22:29 Nathan kernel: [drm:intel_dp_aux_wait_done] *ERROR* dp aux hw did not signal timeout (has irq: 1)!
Mai 18 08:22:30 Nathan kernel: [drm:intel_dp_aux_wait_done] *ERROR* dp aux hw did not signal timeout (has irq: 1)!
Mai 18 08:22:30 Nathan kernel: [drm:intel_dp_aux_wait_done] *ERROR* dp aux hw did not signal timeout (has irq: 1)!
Mai 18 08:22:30 Nathan kernel: [drm:intel_dp_aux_wait_done] *ERROR* dp aux hw did not signal timeout (has irq: 1)!
Mai 18 08:22:30 Nathan kernel: [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 8
Mai 18 08:22:30 Nathan kernel: Raw EDID:
Mai 18 08:22:30 Nathan kernel: 00 ff ff ff ff ff ff 00 06 10 df 9c 00 00 00 00
Mai 18 08:22:30 Nathan kernel: 1a 15 01 04 95 1d 12 78 02 ef 05 97 57 54 92 27
Mai 18 08:22:30 Nathan kernel: 22 50 54 00 00 00 01 01 01 01 01 01 01 01 01 01
Mai 18 08:22:30 Nathan kernel: 01 01 01 01 01 c2 23 a0 d4 50 84 1a 30 40 2a 36
Mai 18 08:22:30 Nathan kernel: 00 1e b3 10 00 00 18 00 00 00 10 00 00 00 00 00
Mai 18 08:22:30 Nathan kernel: 00 00 00 00 00 00 00 00 00 00 00 00 fe 00 4c 50
Mai 18 08:22:30 Nathan kernel: 31 33 33 57 50 31 2d 54 4a 41 33 00 00 00 fc 00
Mai 18 08:22:30 Nathan kernel: 43 6c 6f 72 20 4c 43 44 20 20 20 00 00 00 00 00
I will search the net a bit and will report here what I have found on this issue.
Edit,
oh, and if someone here has an idea, I would be happy to 'hear' it.
Last edited by Rhodan@Nathan (2013-05-18 08:20:22) -
Throws severe error in OBIEE SA with Essbase Cube as Source
Hi All,
Currently we built the SA using Essbase ASO cube as source.Wehen we are trying to drag more then 4-5 dimension hierarchies it throws an severe error
Essbase Error: Query is allocating too large memory(>4GB) and cannot be executed.Query allocation exceeds allocation limits(HY000)
I am not able to identify the same in Essbase Excel addin.All are single-level based hierarchies and the count of dimensions is not more than 1000.
Can someone help me out to find out a way to resolve this issue or any work around.
Thanks,
SatyaBWhat is the version that you using for OBIEE and Essbase ?? This is a know bug when Essbase as a source is used for OBIEE reporting. Try to get in touch with Oracle Support by raising an SR and getting correct patch (set of library files) for your system.
This shud solve your problem. -
Severe error(s) occured in phase MAIN_INIT/UCMIG_STATUS_CHK!
Dear team,
We have started Upgrading our existing SAP R/3 x200 system ( Windows 6.1 & oracle 10.2.0.5) to ECC 6.0 EHP5.
All the processes upto 'check' completed without error.
In preprocessing phase we got stuck at phase "MAIN_INIT/UCMIG_STATUS_CHK!" ( As shown bellow).
Severe error(s) occured in phase MAIN_INIT/UCMIG_STATUS_CHK!
Last error code set: The Unicode Conversion Preparations on the startrelease (transaction SPUMG) have not been finished, procedure cannot continue
Trouble Ticket Generation
A trouble ticket and an archive with all relevant log files have been generated. Trouble ticket: "D:\usr\sap\SND\upg\abap\log\SAPup_troubleticket.log" Log archive: "D:\usr\sap\SND\upg\abap\log\SAPup_troubleticket_logs.sar"
We have manually done SPUMG as per note 1051576 (Our system is single code page system)
But error still exist.. Kindly guide.
Regards,
VishalHello Vishal,
Are you doing non-unicode R/3 x200 to unicode ECC 6.0 EHP5 upgrade? If yes, please go through CUUC upgrade document for pre-requisites.
Please take a look at below threads. It can help you.
CUUC - SPUMG Related Quary
http://www.saptechies.com/combined-upgrade-unicode-conversion-cuuc-faq/
Thanks,
Siva Kumar
Edited by: Siva Kumar Arivinti on Dec 9, 2011 7:36 PM -
MS SQL server is going down frequently(10 days of gap) with exception message: "A severe error occurred
on the current command. The results, if any, should be discarded". We are facing this issue for past two month.But funny thing is server will be up automatically with out any service restart manually. Also if we try to restart the SQL
server service manually then SQL server will be in a dead lock situation and it will not come up even if we wait for long time. Then we should do a windows server machine restart to
make the SQL sever up. As a suggestion from Microsoft to fix this kind of similar issue,
we have installed service pack 3 for SQL Server. But even after we are facing same issue.
Server Details:
Server OS: Windows Server 2008 R2
Two type of database servers are installed on server:
1. MS SQL Server 2008 R2
2. My SQL
Also Reporting server is configured for the purpose of generating SSRS report from a dot net website.
NOTE:Immediately after the data retrieval/save, we are closing the connection explicitly by the
application.
we have checked the windows event log and below are the details:
Log Name: Application
Source: ASP.NET 4.0.30319.0
Application information:
Application domain: /LM/W3SVC/5/ROOT-1-130718142067856406
Trust level: Full
Application Virtual Path: /
Application Path: E:\WebSpaceFolder\ACSQuiK\Production\
Machine name: DBSERVER
Process information:
Process ID: 148
Process name: w3wp.exe
Account name: NT AUTHORITY\NETWORK SERVICE
Exception information:
Exception type: SqlException
Exception message: A severe error occurred on the current command. The results, if any, should be discarded.
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj, Boolean& dataReady)
Log Name: Application
Source: Report Server Windows Service (MSSQLSERVER)
Description:
Report Server Windows Service (MSSQLSERVER) cannot connect to the report server database.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Report Server Windows Service (MSSQLSERVER)" />
<EventID Qualifiers="0">107</EventID>
Could anybody can suggest any kind of fix for this issue? Thanks in advance.Hi YesYemPee,
I have tried but still not clear about your issue, I would like you provide more details information about your issue based on below points to better analysis about the issue:
What action did you do and caused the error "A severe error occurred on the current command. The results, if any, should be discarded", did you run report on the web application or something else then the error happen?
If you rendering the report and got the error, please try to provide us more error information in the log files which path like:
C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVER\Reporting Services\LogFiles
If it is not the case in step1, Please try to provide SQL Server Error log(SQL Server Logs) and more details information.
If you still have any problem, please feel free to ask.
Regards,
Vicky Liu
Vicky Liu
TechNet Community Support -
I have an older iPod (2005). After years of inactivity I tried to install the cd on my PC. I get the following error message, after several attempts to install: iTunes cannot run because some of its required files are missing. Please re install iTunes.
Did you follow the exact instructions in this Apple support document to remove and re-install iTunes and ALL other Apple software on your XP machine?
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
B-rock -
Hi Experts ,
Currently performing EHP7 upgrade I have faced error during the configuration phase , below attached was the error screenshot .
error logs shows the below :
Executing module 'PREP_INSTALL'.
Execution of PREPARE module "Installation" begins at 20140302202456
# Starting phase execution with maxpar = 6, scheduled: 14x'-'
CURRENTPHASE PREP_INSTALL/SHDINST_OS
...started at 20140302202456
# Using phase log file 'SHDINST_OS.LOG'.
..finished at 20140302202457 with status ABORTED.
# Error message set: 'Process H:\SUM\abap\exe/sapstartsrv.exe exited with -1, see 'H:\SUM\abap\log\SAPup.ECO' for details'
.begin dialog at 20140302202459
SHDINST_OS log :
1 ETQ399 Possibly the password for user ISNET\SAPServiceDEC entered in phase
1 ETQ399 INITPUT was wrong. You can reset it by calling 'SAPup set stdpar'.
1 ETQ399 Try to execute SAPSTARTSRV.EXE manually using the following syntax:
1 ETQ399 H:\SUM\abap\exe\sapstartsrv.exe -r
1 ETQ399 -p H:\SUM\abap\DEC\SYS\profile\START_DVEBMGS01_SAPECCDV -s DEC -n 01
1 ETQ399 -U ISNET\SAPServiceDEC -P <PASSWORD> -e ISNET\decadm
1 ETQ399 and check if the service SAPDEC_01 can be stopped and restarted.
1EETQ399 Last error code set is: Process H:\SUM\abap\exe/sapstartsrv.exe exited with -1, see 'H:\SUM\abap\log\SAPup.ECO' for details
1EETQ204 Upgrade phase "SHDINST_OS" aborted with severe errors ("20140302202457")
Kindly advice to fixHi Mohan,
Solution of your issue is already present in SHDINST_OS.LOG
Possibly the password for user ISNET\SAPServiceDEC entered in phase
1 ETQ399 INITPUT was wrong. You can reset it by calling 'SAPup set stdpar'.
1 ETQ399 Try to execute SAPSTARTSRV.EXE manually using the following syntax:
1 ETQ399 H:\SUM\abap\exe\sapstartsrv.exe -r
1 ETQ399 -p H:\SUM\abap\DEC\SYS\profile\START_DVEBMGS01_SAPECCDV -s DEC -n 01
1 ETQ399 -U ISNET\SAPServiceDEC -P <PASSWORD> -e ISNET\decadm
1 ETQ399 and check if the service SAPDEC_01 can be stopped and restarted.
Read the log carefully.Have you performed the above mentioned steps from SHDINST_OS.LOG file at your end.
Also just give a full restart your server,up all the required services & confirm the execution of the phase.
Thanks,
Gaurav -
ORA-02068: following severe error from ....
Hi,
we have a dataguard setup for 10g databases on AIX platform as below.
host1(TALON) host2(CATALINA)
TICSPROD (PRIMARY ) TICSPROD(STANDBY)
PLSPROD (STANDBY) PLSPROD (PRIMARY)
We have decided to recreate PLSPROD STANDBY(because of some setup issues) this weekend and last night we just disabled the PLSPROD STANDBY.Means now only PLSPROD PRIMARY is working.
Last night, suddenly in the PRIMARY TICSPROD alert log file we see the below error.Is it because of the dataguard issue or any other issue.Please help as we have no clue how to resolve this.
ORA-02050: transaction 4.34.2844973 rolled back, some remote DBs may be in-doubt
ORA-02068: following severe error from PLSPROD
ORA-03113: end-of-file on communication channelWe have decided to recreate PLSPROD STANDBY(because of some setup issues) this weekend and last night we just disabled the PLSPROD STANDBY.Means now only PLSPROD PRIMARY is working.
Last night, suddenly in the PRIMARY TICSPROD alert log file we see the below error.Is it because of the dataguard issue or any other issue.Please help as we have no clue how to resolve this.
ORA-02050: transaction 4.34.2844973 rolled back, some remote DBs may be in-doubt
ORA-02068: following severe error from PLSPROD
ORA-03113: end-of-file on communication channel
What are the parameters of standby
post
show parameter dest_2
show parameter state_2ORA-02050:
transaction string rolled back, some remote DBs may be in-doubt
Cause: network or remote failure in 2PC.
Action: Notify operations; remote DBs will automatically re-sync when the failure is repaired.
defer the destination state 2 also refer the below link
http://www.orafaq.com/forum/t/67115/2/ -
ORA-02068: following severe error from LNK -(Prob with HS ODBC pls. help)
HI Every one...
Please help me out...
Problem in d/b link using generic connectivity of oracle to connect MS Access here are the details ...
ORACLE VERSION - Oracle8i Release 8.1.7.0.0
OS - WINDOWS 2000 Service Pack 3
MSAccess 2000
I sussessfully created System DSN steps....
ODBC Data Source Administrator -> System DSN -> ADD -> (select) Microsoft Access
Driver [*.mdb] Version- 4.00.6200.00 -> ODBC Microsoft Access Setup (Data Source
Name = dbq and selected the MS Access database file. and OK -> OK
HS parameter file...
Location .... D:\oracle\ora81\hs\admin
Name........ initdbaccess.ora
HS_FDS_CONNECT_INFO =dbq
HS_FDS_TRACE_LEVEL =off
listener.ora
Location.... D:\oracle\ora81\network\ADMIN
(SID_DESC =
(SID_NAME = dbaccess)
(ORACLE_HOME = D:\oracle\ora81)
(PROGRAM = hsodbc)
TNSNames.ora
Location.... D:\oracle\ora81\network\ADMIN
DBACCESS =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
(CONNECT_DATA =
(SID = dbaccess)
(HS = OK)
I stop the listener and start it again.... then on sqlplus.....
SQL> connect qu3/qu3@mysys
Connected.
SQL> create database link lnk using 'DBACCESS';
Database link created.
SQL> select * from t_emp_main@lnk;
select * from t_emp_main@lnk
ERROR at line 1:
ORA-02068: following severe error from LNK
ORA-03114: not connected to ORACLE
Why this Error is comming.... any solution pls......
Thanks in advance....
SMGHelp please... problem still pending ....
-
ORA-02068: following severe error from db link
Hi,
I have the following piece of code which gives an error.
FOR items IN (SELECT DISTINCT item FROM ccm_items@caav_link a)
LOOP
itemtrans.process_item@manuf_link(items.item);
END LOOP;
Procedure process_item may take several hours to complete execution. Hence after processing one or two items, I get an error "ORA-02068: following severe error from caav_link
ORA-03113: end-of-file on communication channel"
I guess this occurs due to some timeout issue. Can you please give some pointers on why this issue occurs and how to avoid it? Also note that I need to use the same link after the loop. So a timeout could cause a problem there also.
Thanks,
BlessonMay be this link will be useful:
http://www.dba-oracle.com/t_ora_02068_following_severe_error_from_stringstring.htm -
ORA-02068: following severe error from - How to handle the overgiven Except
Hello again ^^,
hope its okay to write the follwnig question into a new Thread...
I sometimes get errors from remote dbs.
ORA-02068: following severe error from DBLINK
ORA-01089: immediate shutdown in progress - no operations are permitted
ORA-02068: following severe error from DBLINK
ORA-03113: end-of-file on communication channelThese are in one sqlerm. Is it possible to handle the second errors without string operations?
Thanks and regards
Edited by: user10283133 on 28.10.2008 08:33
Try to force the headlineThe remote db is accessible from 6 am to 6 pm. When querring longer than given time span I get the Error ORA-02068. In the sqlerm for this Error is a second Errormessage from an second different Error concatenated.
Now I will tell what I think is happening:
I think the remote db say: >>I will go sleep now<< an throws Error A (ORA-01089 (or ORA-03113, or what else)). This Error A goes to the local db. The local db get the Error A and throw a new Error (Error B = ORA-02068). This Error B is independet from Error A. And I see a String which is "Error B + Error A"
I recieve also three possible Errormessages:
ORA-02068: following severe error from DBLINK
ORA-03113: end-of-file on communication channel
ORA-02068: following severe error from DBLINK_ODS_STBY
ORA-01089: immediate shutdown in progress - no operations are permitted
ORA-02068: following severe error from DBLINK_ODS_STBY
ORA-whatelse: what elseI can handle the ORA-02068. But my questions is, can I handle the second Error (thus Error A) without string operations?
The Relase is 10g2. Please tell me which information you still need ...
Thank you very much.
regrads
Maybe you are looking for
-
I have photoshop CC. I cannot open two files such as Tiffs and view them side by side. When I open the second file it overrides the first. Do I need to do something with preferences?
-
Hey folks, hope you guys will tune into this week'sOn the Air (10am CT on 7/15)where we are talking about "The MostPowerful Workstations in the Universe!"We're going to talk with HPand Spicehead Travis0729about why and when you need to go above and b
-
How to use optional prompts with stored procedure universe?
Hi Experts, Iu2019m working on stored procedure universe in BO XI 3.0 SP2 FP2.5 with oracle at back end. My requirement is that I have to pass 5 optional prompts in the report and we have to pass these prompts through open document link. Please tell
-
Export to PDF with Working Hyperlink
Post Author: JaeLevel3 CA Forum: Exporting I saw a few of these questions, and left unanswered. I hope answering this question can help several people. It appears when the hyperlink starts with http, exporting Crystal to PDF, Acrobat recognizes the
-
Drag and Drop not working in Library Mode.
I tried rebooting but there seems to be no way to move images from the grid under folders to catalogs. Can't drag and drop in LR 5.3.