HP Designjet T520 Printing A3 cuts off at bottom

HP Designjet T520 Printing A3 cuts off at bottom When we plot something with AutoCad, and then print Portrait, it all prints fine except the bottom edge is slightly cut off. The paper we are using is A3, and the printer and Autocad settings is A3. Any ideas? WINDOWS 7 - NO ERROR MESSAGES

This very same issue is affecting me with T520.This happens with vertical A4 and A3, and till now I've not yet found a solution. To be sure to be within printer margins I've set the drawing actual margins on all the four sides to be 1.8 cm from paper sheets borders.But as alway I get the bottom border cut, while the upper border seems shifted downward and it's placed at 3,0 cm from the upper border of the paper. BUTif I set the page to be ORIZONTAL in the application, choose the orizontal page format etc the printout is perfectly aligned. To me this seems a weird issue.Experienced this issue using Archicad 16, Illustrator and Indisign. On OSX, from Snow Leopard to Mavericks. These are my printer details:Nome prodotto HP Designjet T520 24inNumero modello prodotto CQ890A Versione firmware AXP2CN1437AR

Similar Messages

I upgraded to OS X Yosemite, and now every time I print, it cuts off the bottom of the page, and is missing content.

Ever since I updated to OS X Yosemite, I have had trouble printing. I don't just use one program. I use many. Printing from the internet, Word, Preview, everything. It just won't print correctly. It has no margin at the bottom of the page, and continues as though theres more paper, and is therefore missing content. It's so annoying. I'm going out of my mind. what do I do?

Printers not behaving? Reset them and start from scratch | MacIssues
OS X- Printer and scanner software available for download

Why are prints from Preview cut off at bottom of page

When I print a PDF from Preview the print has about 3/4" cut off the bottom of a portrait document or from the right of a landscape document.. When I print the same document from Acrobat Reader, it prints correctly. I use Page Setup before printing. The scaling in the other direction seems correct which makes the cut-off a mystery.
I prefer Preview for PDFs as it is much faster than Acrobat Reader. The cut-off prints have caused me grief when I have not detected them. What is going on here?

I have the same problem and can confirm it also happens in Leopard. There was traffic on a similar Leopard issue printing landscape to Windows shared printers that was fixed in 10.5.2, but it doesn't seemed to be solved for my situation (printing to CUPS shared printer). Note that it seems to be a bug in the way Preview creates a PDF for printing, since Adobe Reader works fine, and "lpr <filename>" from the command line will also work.
If you have any more info since you posted, I would be interested.

When I try to print out something on my macbook pro,it cuts off the bottom, but if printed from a pc I get the whole article

when I try to print out something on my macbook pro, it cuts off the bottom, if printed from PC the whole article is printed

marionfromclermont wrote:
I have HP Photosmart 55510 series. In the print dialogue box it shows where the bottom of the 1st page is cut off and the top of the second.
Yes, but the part cut off the bottom of the first page should appear at the top of the second. No content should be lost, just split between pages.
Safari makes little or no attempt to keep a line of print or a picture from splitting across pages, seemingly just imaging the web page as one large image and printing so many inches or millimeters of the image per page.

Print out cut off right hand side

Hi All,
We configured network printer in production system,print out cut off right hand side
user giving print out e-recruiting web based system.i had made all changes in SPAD.
It seems to apply some SAP note Can anyone suggest me please.
Thanks in advance
Jalandar Reddy

Hi,
One note, addressing same problem as you have: 1226913.
<removed_by_moderator>
Do not ask for points.*
Read the "Rules of Engagament"
Thanks & Regards,
Sujit.
Edited by: Juan Reyes on Oct 1, 2009 10:55 AM

How do I get the page to shift up by as little as 1/8" so it does not cut off the bottom coding of

How do I get the page to shift up by as little as 1/8" so it does not cut off the bottom coding of official documents? There is usually plenty of white space at the top. Center command does not seem to help.

You cannot change pdf files in Reader. You can set it to print with a shrink to fit option.

IMovie cuts off the bottom 10% of my video image once it is moved to the editing area. I need the whole image. How can I solve this?

iMovie cuts off the bottom 10% of my video image once it is moved to the editing area. I need the whole image. How can I solve this?

I have solved the problem by changing the Project Aspect to 4:3 rather than wide screen.

Browser fill image cuts off at bottom when published from Muse to BC...?

The site previews fine in the browser but when I publish it to BC it cuts off the bottom of the image and just shows the browser fill color (which is dark grey). I'm pretty sure this is a BC issue because everything looks fine in Muse. I have done all I can think of to fix this but havn't figured anything out. Here is some information if it helps. Weird thing is only the img. I used for the header is listed in the css, the img. for the browser fill is not listed.
http://grasslandoregon01.businesscatalyst.com/index.html
Master Page css:
#u7524
          border-style: none;
          border-color: transparent;
          position: relative;
          background: transparent url("/images/header_swoosh.png") no-repeat center center;
          background-size: cover !important;
#u7524_align_to_page,#u7579
          position: relative;
#u32679
          border-style: none;
          border-color: transparent;
          background-color: transparent;
          color: #FFFFFF;
          position: relative;

Hello,
You probably did not find this article at the right time but there is one KB article explaining how to insert the Edge content into a Muse website.
Basically what you have to do is, after you publish the Edge project, to take the exported folder, or just the files, (but I'm totally into taking taking the whole folder) and upload them to your FTP where the Muse site is published. After that just use the "Object > Insert HTML..." option from Muse and paste the <iframe> code from the KB and customize the path to the folder where the files are located and the width & height for the iframe.
KB can be accessed here: http://www.adobekb.com/inserting_edge_content.html
An example can be found here.
- Edge project uploaded to FTP.
- Content of the project folder.
- HTML code
I hope this will answer your question.
Cheers,
Cristian

Print PDF Directly to Printer - Margins cut off

Hello,
I am using an application called PeopleSoft, and we generate out report files in PDF format.
If I direct the output file directly to the printer then the right and bottom margins are cutting off the document text.
Whereas, if I direct the printer out put to a network drive, then open the PDF in an PDF reader of Acrobate, then print the file it works fine.
Can anyone explain to me why this is so, and if there is a way to change the margins, when sending the output to the printer. To ensure the entire document is printed.
Thanks in advance,
Matt.

Yes, same PDF file.
I run a batch process that generates the report output file, I can choose to direct the output directly to a network printer, or save it to a network drive.
If I choose to direct the output run to the printer then the right margins and bottom margin is cutting off the text of the actual report file.
However, if I direct the output to be saved to the network drive, then open it using Adobe Reader, then print it, the entire report document fits easily within the margins and no text is being cut-off.
I lack the technical knowledge to explain how/why this is happening.

Print gets cut off C4280

I am sending from a hospital - we have purchased a Photosmart C4280 All in One Printer - The printer has now started cutting off the 4x6 print - we print all our specimen pictures from a SD card - It's like the picture gets cut off - the date is partially there and ends with an approximate 1/2" space on print Any help would be appreciated

Hi,
One note, addressing same problem as you have: 1226913.
<removed_by_moderator>
Do not ask for points.*
Read the "Rules of Engagament"
Thanks & Regards,
Sujit.
Edited by: Juan Reyes on Oct 1, 2009 10:55 AM

Every other line of print is cut off on my Photosmart C4750

I have recently replaced and aligned new cartridges on my Photosmart C4750. I am printing directly from computer to printer via USB. The last two items I have printed are being cutt off every other line of print, on either the top or bottom of the printed pages. Any ideas?

Hello there, Welcome to the Forums! I hope you enjoy your experience
I noticed your post about the printing problems you are having and would like to offer you my suggestion. First of all, print using a different program to see if the issue is only within one program. If you see the issue happening no matter where you print from, run the HP Print and Scan Doctor if you're running a Windows OS.
Also, try a copy to see if there are cut offs with them as well!
Please let me know what happened and include your OS and programs you have tried printing from.
Help to find which Operating System you are running:
Which Windows Operating System am I running?
Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
Hope to hear from you soon I hope my post was helpful.
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Print border cut off

Hello, I just got a Pixma Pro 10 yesterday and after several hours figuring stuff out (downloading the right software, etc) as my cd/dvd drive is not working. I finally was able to print a test print.
My issue is that after I made a print, on one side of the print the border is cut off, there's like only a hair's width of a border on the left side, I'm printing in Landscape orientation if that helps. . So only three sides have the white border. I used Canon's Print Studio Pro as well as printing from Lightroom. Printing from Lightroom left a bit more border on the left side but not much.
I spent hours up trying to figure out how to fix it but to no avail. If anyone can help I'd really appreciate it.
iMac running Yosemite

First, you must not let the printer set anything. Turn off every bit off control it has. You can do this with the Canon My Printer under the Printer Settings tab. Do you know how? I will guess, yes, for now but if you don't get back to me.
Second, you need to have your photo editor (like Photoshop) handle all the settings and color matching. You know how to do this? I prefer Photoshop and I use AdobeRGB color space.
And lastly, it is essential you get some settings on your monitor that somewhat matches what the printer is printing. Your printer may be doing exactly what you are telling it to do and you have no idea it is, because your monitor is so far off. If you don't do this step, you can forget the other steps. However, there are only a few things that you need to be concerned with. You don't need any fancy extra add-ins to do this. No additional software or gadgets, etc.
Most people set their monitors too bright.
You must get the gray-scale very close. You need to get the brightness very close and you need the contrast very close.
After you do these things you can make adjustments to your prints by just looking at your screen. Because you know the monitor and printer are on the same level. One more point, you can NOT get a printer to print every color exactly the way you saw it. It isn't possible as all colors and adjustments effect all others. My goal is to get the skin tones right. That is what people notice most. Remember you are dealing with two different disciplines here. One is colored light and the other is colored dyes. They are not the same thing.
All the Canon photo printers I have ever seen have a warm/magenta cast. Canon engineers must prefer this look. It can not be changed. You need to "fix" it in post.
Make sure you have the correct ICC profiles and you are using Canon brand ink and paper until you get good with the printer. Very, very important, otherwise you don't know if the printer is doing exactly what you are telling it to or not.
Important is, use the USB connection until everything is right. You are just adding another issue when you try to set up the printing and the wireless all at the same time. Just like using Canon branded products until it is a go. Use a real printer USB cable. Not just any old USB cable. Get everything right before you explore.
EOS 1Ds Mk III, EOS 1D Mk IV, EF 50mm f1.2 L, EF 24-70mm f2.8 L,
EF 85mm f1.2 L II USM, EF 70-200mm f2.8 L IS II,
Sigma 120-300mm f2.8 EX APO, Photoshop CS6, ACR 9, Lightroom 6

Printing area cut off

I have a HP4500 officejet on a mac power pc G4 with 10.5.8.
My problem is that the print cuts off in the middle of words, 15mm from the short edge of a landscape sheet!
the other side short edge of the landscape sheet (A4) prints to 10mm from the edge as it should do.
I am using Quark express 6.1
help!
regards
Roger

Let me make sure I understand. When using QuarkXPress and you change the page format from portrait to landscape, the words continue to go past the edge of the paper so they are getting cut off and not wrapping around automatically, correct? It has been a long time since I used Quark so I will do my best to help out if I can. I had to do a lot of searching but I did find this page about Mastering Printing in Quark. Let me know if this doesn't help you and I will look into a setting like margins to change in the HP Utility for your printer, but I would start with the print settings in Quark first.
Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
When a solution is found please mark the post that solves your issue.
Every problem has a solution!

PDF printing margins cut off

Hi,
every time I try to print a PDF directly from Safari 7.0.2, the edges get cut off.
If I download the PDF and print it using Preview or Acrobat, everything is fine. Chrome can print perfectly, so it is not a browser thing.
There are tons of threads about safari cutting edges, wrong margins, etc. I tried a few of workarounds, some dark magic plist editing, nothing helps.
It is not only me, all users of my webapp are reporting the same problem.
Must I disable Safari for my users and ask them to switch to firefox or chrome?
Please help

Hey Apple, I thought you wanted to place Safari as a competitive browser!
Still the same issue on Safari 7.0.3, the margins simply cut off parts of any pdf. It looks like it is a margins issue, but I am not sure.
I am moving all my users to Chrome or Firefox!
PLEASE FIX!!!

Outlook calendar printing is cut off

HP Photosmart e-Stn C510a series
Windows XP Pro
Has anyone had issues with printing an Outlook calendar, monthly view and the calendar is cut off after the first 3 days worth of data?
Page is coming out incomplete.
Any assistance is greatly appreciated as my boss is really frustrated with this printer.
Thank you

Hi, the minimum margins are as follows:
Top: 0.06 / Right & Left: 0.125 / Bottom: 0.57
Set your Margin guides to these margins in Publisher.
Please mark the post that solves your issue as "Accept as Solution".
If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
I am not a HP employee.

HP Designjet T520 Printing A3 cuts off at bottom

Similar Messages

Maybe you are looking for