HP Designjet Z3200ps Constantly on "Pause" and Driver Issue

Hello.
I have a Z3200ps 44-inch, which goes to "Pause" all the time and doesn't allow to print at all. Also I cannot see Paper/Quality menu in printer driver window.
HP Printer Monitor shows the printer to be "Idle", which is its normal state.
All the drivers are up-to-date and I tried to reinstall them, as well as resetting the printing system - it just doesn't help.
Any ideas?

This forum is focused on consumer level products. For the Designjet you may have better results posting in the HP Enterprise Designjet forum here.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Similar Messages

Display and driver issues with Windows 7 on i5 MBP

Hello-
I just purchased one of the i5 Macbook Pros, and set out to get Windows 7 working through boot camp. I did this on an older model (32-bit) previously with no problems.
This time around, installation of Windows worked fine, but I have had some trouble getting all the drivers working. The setup.exe program on the OS X DVD didn't want to run at all, I had to do a workaround from the command line that I found on a forum (otherwise I just got a response of "Bootcamp x64 is unsupported on this computer model").
Eventually I got (at least some of) the drivers to work, but there are still some issues.
After installing the drivers, things like brightness and two-finger clicking started working. A number of other things still aren't, though:
- Display: My machine has a 1440x900 screen. But for some reason Windows refuses to go higher than 1280x800.
- Network: No wireless at all. Windows doesn't detect any wireless capability, and only gets on-line via ethernet.
There may be other issues, but these are the big ones. Can anyone provide suggestions on what to do to get everything working?
Thanks!

I just used winclone to move my Win 7 from my Core2Duo MPB to an i5 MBP and had to do a few updates and have eneded up in pretty much the same place as you. I won't bother installing from scratch. I'm guessing we just need to wait for some bootcamp updates for these new machines.
For those of you who are looking to migrate your bootcamp partition over, winclone made it easy - I followed the directions for resizing and Win7 boots, does a disk check, then installed many of the new drivers automatically. There are some drivers that are still needed however, wifi and video. I also so a USB driver issue but have to look at that a little closer before I comment.
Best of luck,
Simon

Printing Banners and Driver Issues

I have recently updated some family tree stuff and wanted to print this off on a multi page banner. I have 2 HP printers a Photosmart 5520 and a P1102W laser printer and neither appear to give the option to print a multipage banner.
After a search it was suggested by someone that the driver for the Deskjet 6980 would work on the 5520 however I cant find it to downoad anywhere.
I have a macbook running osx 10.8 and all the option say to upgrade drivers via the software update feature but given I dont currently have a deskjet 6980 then I cant get the upgrade (even the HP site for the driver doesnt seem to have a driver to download)
Is there a way to get an updated software for any of the printers I have that would let me print a banner or get a compatible driver that will?
Seems a bit weird that the printer I had 15 years ago let me print banners but these new ones won't
Anyway, I hope someone can help
Best reagrds
Scott
This question was solved.
View Solution.

Hello scm256. I understand you are having banner printing and driver upgrade issues.
In terms of banner printing, only our higher-end printers are almost guaranteed to possess that capability. I will post the specifications of both the printers, so you can review the supported paper sizes and types:
Photosmart 5520: http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/kb/docDisplay/?sp4ts.oid=5157533&spf...
Laserjet P1102W: http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c01999607
In terms of updating the drivers, you are probably experiencing that the printers you own do not possess any driver updates at this time, especially an older printer like the Deskjet 6980. Also, there likely will not be a driver update for banner printing, for any printers that do not originally support it.
Please let me know if you have any other questions or concerns. I'm only here to help!
Mario
I worked on behalf of HP.

MZen Micro Software and Driver Issue

I'm operating with the following and have not been able to link to Creative site or computer for several years, just able to play existing songs.
- Zen Micro V.0.03
- Vista 6.0 Build 6002 Service Pack 2? 32 bit
- Windows Media Player .0.6002.83
If anyone can help me with which drivers and SW that I need to upgrade to it would be appreciate. I fear I may have to upgrade initially on an XP system and then again on Vista. If someone can help me with this it would be greatly appreciated.
Jim

(Re: MZen Micro Software and Driver IssuesHere's what is stated in the firmware details. ?
IMPORTANT:
Be sure to back up all the audio and data files on your Zen Micro before installing this firmware update as all content will be lost when you install the new firmware. After installing the firmware, use Windows Media? Player 0 to restore audio and/or data files to your player.<
This firmware will currently ONLY work on Windows XP or Windows XP Professional x64.<
Installation of this firmware may take up to 5 minutes, and your device may reboot a number of times during installation.<
Software updates are required if you want to use any currently installed applications like Creative MediaSource?, Zen Media Explorer, or other track management tools with your player.<

Formating to Win7 VECD and driver issues

I have recently formated my booklet 3g to win7 vecd for enterprise issues.
After reinstalling all the drivers I've found that just the 3G option modem usb driver doesn't installs correctly, the driver listed from the nokia->support webpage.
Eitherway, in the option webpage, with my IMEI i cannot find the method to download the globetrotter connect 3.1 since it is a "secured" file. I have also tried to download the software that my mobile provider gives to me, but it doesn't work neither. Also tried to install the driver from the option webpage for the option 382E embedded device, and still is not recogniced...
I have my sim inside the SIM slot... but in the device administrator from windows 7, its says that there is an "unknown device" under the USB tab.
I don't know what shall I do now in order to find a solution for this.
Thanks in advance for any possible solution
Regards
Solved!
Go to Solution.

Up to today, I've tried multiple choices in order to make this work.
Still find in the Device Adminsitrator: "unknown device", under the USB controllers. I expect this to be the 3G/GPS modem, but not sure, since is the only thing not working still on my laptop.
Ive tried using drivers version 5.1.32, 5.1.33 even a driver for 382 made for a laptop Acer Timeline, with no success...
Thing is I have tried also uninstalling the unknown device driver, and rebooting computer, but still comes back the same driver... this done with all the drivers downloaded so far.
Under the drivers folder for the "official nokia-option" set, appears some like:
GtGps.inf
gthsmdm.inf
gthsndis.inf
I've tried to installed them manually but then, the device gets stuck with no response. I'm starting to believe that maybe the usb modem is broken, or doesn't support the windows 7 enterprise edition. But that is pretty strange, since is a 32 bit edition, and all version are based on the same type of software... then starting to believe the first thing.
My booklet is branded with Spanish Movistar provider, and I have a Movistar SIM into the slot, so I should have no problems of SIM locks or anything like that (even it doesn't even recognice the modem).
This is kind of frustrating since is the only thing left for me to have the booklet working great

ITunes pause and play issue

For some unknown reason, iTunes will play/pause the current song anytime the following happen:
- I move any file to another folder (also CMD Del)
- I empty the Trash
- I hit play or pause in YouTube
- A message comes into iChat
Also sometimes in iTunes I have to hit Play button three times to get song to play. Same with DVD Player.
How do I resolve this issue?
I have all the latest software versions on a Mac Pro Dual Core.

I get a message that tells me only installed programs can be accessed. When I try to upgrade to the new version the install fails and I ma told it cannot find the file "itunes.imi".
Doublecking something, bobo ... is that the iTunes.msi file that it says is missing?
If so the iTunes.msi is actually damaged, rather than missing, and the damaged .msi is also causing the problem with launching your existing version of iTunes.
Try the procedure I outline in the following post:
http://discussions.apple.com/thread.jspa?messageID=9694258&#9694258

Reinstall of Win XP Pro on T42 help = Device and Driver Issue

Hi All, need help. Recently I re-installed Win XPro on a T42 Type 2373 ThinkPad. Prior to doing a re-installed all devices were working(just 3 days ago). Wireless and Ethernet. After a clean installed the systems does not see ethernet or wireless device. I checked Device Manager and I get the famous "? Other Devices" for Ethernet Controller. I have installed all the driver listed on
http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-55386
Still systems does not recognize device. Devices are ENABLED in the BIOS. Device Manager does not show Wireless device and Ethernet. I was able to install video, sound, & modem. So here I am stuck unable to connect to internet via LAN or Wireless. I am lost for words. Any help would be greatly appreciated.
Thanks

Solved: after downloading the driver I actually had to go to the location of the file and click on the SetUp and it worked.
After downloading and opening the exe file i assumed (and we know what that does) that was all i needed to do. It seems that also have to then open the folder that this file unpacked to and click on the setup file (which i didn't realise was there).
http://forum.thinkpads.com/viewtopic.php?t=66278

WoW Wireless Headphones Mic and Driver issue

I know a lot of people have issues with the mic sounding muffled to others. One thing i noticed is that the default sample rate is 16000 Hz (Tape Recorder Quality). Is this my only option becuase I feel that is my issue. My destop mic is set at 48000 (DVD Quality). I cant believe there is not a way to change this. I have updated the firmware but dont feel that did much at all.
The other thing I wanted to mention is the driver date. I downloaded it on the website where it says released March 23 2010, yet when I go into the actual driver its date is December 9 2009. Is it really that old.

Are your headphones showing up as the default playback device? I have an X-FI Titanium and the headphones connected and my Titanium is usually my default for my speakers. In Windows 7, I usually go to control panel and sound, and there I choose the WoW as default and this solves my issue.
Windows usually chooses the first device listed in control panel until you choose another default.

USB and Driver Issues

Hello!
I recently received a bunch of new devices for Christmas - a digital camera, MP3 player, etc., plus I just bought a BlackBerry this week.
The problem I'm having with all of these devices is my Compaq Presario CQ60 Laptop will not connect with these devices. It works fine with my mouse and my printer, but those are drivers I had installed right when I got the computer.
Although I installed the drivers using disks or website files for all of these other devices, when I plug them in the computer does not recognize them. It tries to install the driver then says pops up with the "device driver software was not successfully installed".
The devices themselves also act as if they are connected to the computer for about 1-2 seconds, then act as if they aren't. My Kodak camera won't even turn on if it's plugged to the computer. The BlackBerry turns itself on and off of charging mode but I manage to back it up when I run the software.
This happens with all 3 USB ports.
And under My Computer the devices don't show up if they are plugged in. Again, it works fine with things that worked with the computer before the problem started, which as far as I can tell was before the holidays.
Any advice? Thanks!

Thanks,
tcam22 wrote:
420US
This would be the first thing to consider as I have no knowlege of which, if any, service pack for Vista you have installed.
Have you gone to the support web page for your laptop and applied the Windows Essential updates that are recommended by HP? Here is a direct link to the HP web support document. There are hotfixes for numerous issues included in the updates which are specifically for your laptop.
regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

IPod Play/Pause and Sound Issue

After the recent 3.1.2 update I'm having a problem with my iPhone's sound cutting out. It's not the speaker because I can reboot the iPhone and it will come back. I'm also having the issue where when I hit the play button in the iPod app after it switches to the pause button it immediately reverts back to the play button. Has anyone had/resolved the issues?

I was just coming in here to search for an issue like this, and found this thread.
I started experiencing what seems like this same issue yesterday. When playing MUSIC ONLY on the iPod, iPhone 3G, random skipping, within the songs, pausing etc. is occurring. This is not occurring when playing podcasts however.
The other oddity here is it does not happen, when playing through headphones. It's only happening when using an auxiliary cable through my car stereo. I know there is nothing wrong with the jack, or plug, as other devices, including another phone\ipod work just fine.
I'm calling Apple regarding this as I literally just had the phone replaced due to a problem with the ring\vibrate switch falling off, so this is a new\replacment 3G. It's been updated to the latest of everything, so this is really disturbing me at this point.

ATIx1900 and driver issue

hi everybody out there
i have a MAC Pro 8 core - 4 gb ram - ATIx1900
i'm running winzozz xp sp2 via bootcamp on my mac pro and i'm trying to playing some games :\
the windows installation through bootcamp was easy and winzozz it's working ok.
I installed Ghost Recon Advanced Warfighter 2 but the game doesn't start, it crash and return to windows while is loading give me this error:
Crash in application version: 30292.2673
Unhandled exception - access violation
C STACK:
DINPUT8: DirectInput8Create
graw2: ???
Renderer: threaded
Physics : threaded
Running the game hardware detector it says the video card drivers are too old (v. 6677); so i tryed to download some new drivers from ATI website but it didn't work and on the apple site the drivers are dated 2005 O.O ?.? -.-'
Is there any chance to update the video card drivers?
Am i doing something wrong?
Many thx in advance for your help

There are threads on x1900 and BootCamp, on display issues, and updating. Also over in the BootCamp Beta forum.
ATI's latest x1900 Catalyst driver looks to be May '06.
When was the game last updated?
Maybe it, and BootCamp 1.3, doesn't 'know' or properly recognize your logicboard, an 8-core system.
"It didn't work."
doesn't give a lot to go on. Did you uninstall and then restart and install? I know Nvidia has improved driver update process in the last two updates (monthly).
I am using Vista 64-bit so I don't even know if SP2 is up to what you need and run on your system.
AMD has Boot Camp only drivers
http://ati.amd.com/support/drivers/mac/bootcamp-xp.html
You could try the x1900 driver and Catalyst which are newer
http://ati.amd.com/support/drivers/xp/radeonx-xp.html
FWIW I use native Nvidia driver from July 26 on OEM 7300 GT in Vista.

Weird glitch noise and driver issues

Hi, recently i bought a probook 450 g2 and i have the following problems:
1) I get an error code 28 and can't find the needed drivers to install
Here is what i see on my screen: PCI bus 0, device 31, function 6
Also i got 3 unknown devices
2) The second issue is I keep hearing some glitching noise from time to time when i watch videos or listen to music. I have read that this may be caused by the HP Support Assistant, but i didn't install it.
Any feedback would be appreciated.

Hi:
You need these drivers...
ACPI\HPQ6007:
http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=6943827&swItemId=ob_132986_1&swEnvOid=405...
USB\VID_138A&PID_003F:
http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=6943827&swItemId=ob_134806_1&swEnvOid=405...
ACPI\INT33A0:
http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=6943827&swItemId=ob_143428_1&swEnvOid=405...

FCPX constantly backing up and rendering issues.

FCPX makes an automatic backup of almost every single change I make. It's really slowing me down. Every clip I select and drop into the timeline is backed up and I have to wait for it to process or the program grinds to a halt. It's essentially backing up every few seconds as i work.
Also noticed that when i open a current project it re-renders the whole thing. And often sections of a project I'm in the middle of working on just suddenly start rendering again. I might make a change to a clip near the end and suddenly the first 30 clips start re-rendering.
Another rendering issue is when I have made a change to a part of a multicam clip, say a colour correction or added an effect etc. It won't render the change until I adjust the clip length and return it to normal. As in, stretch the clip out by +2 seconds then pull it back in -2 seconds, then the render will begin.
These problems are costing me a lot of time and money and would love to hear if anyone else has experienced similar and has solutions.
FCPX 10.2 / OSX Yosemite 10.10.3 / iMac 27-Inch Late 2012, 3.4GHz, 32GB Ram, NVIDIA GeForce GTX 680MX 2048MB, Fusion 3TB

Suggest that you download TimeTracker to reveal exactly what is being backed up on each pass.
http://www.charlessoft.com/
The application is not fancy, and it will probably take 5-10 minutes to load depending on how much data you have on the Time Capsule.
Once you identify the file that is causing the bloat, you can elect to exclude that file from backups if it is not needed, using Time Machine Options.
It might be a backup history for your browser or something similar if you do not clear the history on a regular basis.
Please post with your results to share with other users who may be experiencing a similar issue.

Can I disconnect a bitlocker USB drive that is in a state of Decryption (paused) and attach to another machine?

Can I disconnect a bitlocker USB drive that is in a state of Decryption (paused) and attach to another machine?
The background on this question is that I didn't realize at first that I was plugged in to a USB 1.1 hub and it took over 1 hour just to get to 1% decryption. I've paused the decryption but a tad hesitant to disconnect and plug in to another system.

Hi,
How about your problem now? Generally speaking, when you encrypt USB drive using Bitlocker, you can pause encryption if you need to remove the device for some reason. If you don't do so, you could damage or lose files stored on the device.
If you need further assistance on this particular issue or any other Windows related issue, let us know and we will be glad to assist you.
Roger Lu
TechNet Community Support

I downloaded quick time becausei tried watching a movie i purchased on itunes and and have watched it before on my laptop but paused and continued. i tried opening it today and it said i needed to download quicktime and i did. it still says i need to

I downloaded quick time because i tried watching a movie i purchased on itunes and and have watched it before on my laptop but paused and continued. i tried opening it today and it said i needed to download quicktime and i did. it still says i need to download it, what do I do

Hi morgangang,
Although that message is not listed in the following article, I would still go through it for help. Things like installing in safe mode may help.
QuickTime: Windows troubleshooting tips
Troubleshooting Tips
Make sure your computer meets the system requirements.
Try running ScanDisk to verify that the directory is OK. This is an important step to take before installing any software.
Try running the stand-alone version of the QuickTime installer in "Safe Mode." It is available here. This can help to isolate issues with background applications, and some driver conflicts.
Make certain you have installed the most recent drivers for your sound and video cards. Even if you have a "brand new" computer, it is not guaranteed to have the most recent software installed. Contact the manufacturer of your sound and video cards for additional information.
Make certain you have installed a recent version of DirectX.
Errors are usually related to software conflicts, unusable files, or incompatibilities. They can also be related to specific hardware combinations, and sometimes the way in which the hardware is configured. Keep in mind that an error message does not necessarily point to a particular cause or solution. Since there can be many different causes for a particular symptom, some suggestions may not work, and you may need to discover a solution on your own.
Note: Please contact Microsoft Corporation or your computer vendor for help configuring Microsoft Windows.
Thank you for visiting Apple Support Communities.
Nubz

HP Designjet Z3200ps Constantly on "Pause" and Driver Issue

Similar Messages

Maybe you are looking for