HP Deskjet 1000 J110 Series Printer

When I try to print something, I get an error message on my HP computer saying: "Printer in an error state."  The pop-up window for the printing process lists: "Status: Error - No Toner/Ink."  I have just had both ink cartridges refilled, so I'm at a loss for what's going on here.  How do I get the printer out of this "error state" and get the printer to indicate that I have a full complement of ink?  Please Help!

Hi JaBojo,
Welcome to the HP Forums!
I have examined your post on a cartridge-related error message, and I would be happy to assist you!
Please follow this document on An 'Ink Cartridge Problem' Message Displays on the Computer.
If you come to the point of replacing a defective cartridge, I must note that it is your choice if you want to refill your ink cartridges, but be aware that the print quality and reliability may not be as good as the original HP.
If you are still having problems after replacing your ink cartridge, please call our technical support at 1-800-474-6836. If you live outside the US/Canada Region please click the link below to get the support number for your region.
http://www.hp.com/cgi-bin/hpsupport/index.pl
Thank you for visiting the HP Forums, and I am looking forward to your reply!
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Similar Messages

  • Why doesn't my Macbook Air print with my HP desk jet 1000 J110 series printer?

    I have tried to print pictures and documents on Pages from my MacBook Air with my HP deskjet 1000 J110 series printer but it doesn't happen. The printer connects all right and doesn't show a problem whilst I am choosing the format I want my document/picture to be printed but after I click Print, a little icon representing the printer pops up in the bottom but after a second or two, it disapppears leaving me with no printouts. Why is it happening and what are the solutions?

    OS X Mavericks: Reset the printing system

  • My Deskjet 1000 J110 series is cutting off bottom parts of sentences?

    My Deskjet 1000 J110 series is cutting off bottom parts of sentences. I have not had this problem in the past. It only does it to a few sentences & my headers. 
    What could be causing this and what can I do about it?

    Hi IlianaGrace96,
    There are several things that can cause your problem.  I would start by reviewing the following HP Consumer Support document:
    Fixing Ink Streaks, Faded Prints, and Other Common Print Quality Problems
    1. Perform a hard reset on the printer. Unplug the power cord from the back.  Leave it out for 30 seconds and then plug it back in.
    2. Use the automated tool to align the cartridges.
    3. Use the automated tool to clean the cartridges.
    4. Manually clean the cartridges with a lint free cloth and water.
    5. Try soaking your printheads in semi warm water for about 5 minutes.
    I hope this helps.
    Regards,
    BethenyF
    Click the Thumbs up to say thanks. Mark Accepted Solution if the solution solves your issue.

  • Installation of HP Deskjet 1000 J110 Series

    Dear Guys,
    I bought an HP Deskjet 1000 Printer J110 Series. Unfortunately, the installation CD that came with the Printer is for Mac OS X Versions 10.5 and 10.6 and i can't install it onto my MacBook Pro using the Mac OS X 10.8.4 Version. I have also tried to search on the website any possible solutions and have come along none.
    Is any one out there who can help out?
    Thanks
    Maurice

    When I connect the printer to the laptop, with Internet connected, the computer tries to automatically search for availability of printer drivers. However, at the end of the search a message is retuned that there are no available drivers for installation of the said printer and that I should check software update later.

  • HP Deskjet 1000 J110 - Pausing causes long print times

    Hi everyone. My company just bought the Deskjet 1000 J110 series for our shipping computer.
    Every time we try to print, the machine pulls the paper in a few inches and pauses while the power light is flashing. It will sit like this for a few moments before printing a few more lines and pausing again (with the power light flashing.) It repeats this process several times. Sometimes, maybe only one line will print, other times it will be more. Eventually, the entire page IS printed and looks just fine with crisp readable text or barcodes with no visible errors. However, it takes anywhere between 1 and 3 minutes to print a full page. This happens whether it is a shipping barcode, a body of text from Word, or even the ‘Print Test Page’ option under the printer properties. Seriously, it took me ten minutes to print six pages today, and they were each only about a half a page of content.
    Does anyone have any suggestions? Any and all help is greatly appreciated.
    I’ve included some system information for reference.
    Thanks!
    Microsoft Windows XP
    Professional
    Version 2002
    Service Pack 3
    Dell Optiplex 740
    AMD Athlon 64 X2 Dual
    Core Processor 3800+
    1.00 GHz, 960 MB of RAM
    This question was solved.
    View Solution.

    Hi,
    The symptoms you described will most likely indicate a communication issue.
    Unplug the USB cable from the back of the printer, then try printing an hardware self test print as following:
    While holding the power button pressed, open and close the Cartridge Access Door for 10 times, then release the power button.
    If the self test being printed as it should, try plugging the USB cable into a different USB port, make sure to connect it directly to a free USB port on the back of your PC and not by using any USB hub.
    If there is still no change, i would suggest you to try using a differenct USB cable and check for any change.
    If the same appears while printing a self test with no USB attached, it might be a cartridge problem affecting the device.
    If so, contact the local HP Call Center in order to troubleshoot the problem and provide any required service according.
    You may find the local number listed below:
    http://www8.hp.com/us/en/hp-information/summary/ww-contact-us.html
    Please let me know of any change,
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • HP Deskjet 1000 j110 sleep mode on Mac OSX 10.7.2

    Just bought a Deskjet 1000 j110 for an iMac.  I have it hooked up and updated drivers loaded (as of 11/21/11).  When I let the printer sit idle, it appears to go into a sleep mode (power button fades in and out).  When attempting to print, I see "Waiting for printer to become available" in the print queue window.  It remains this way and never actually prints.  I hit the power button, thinking that pressing the it would bring the printer out of sleep mode, but it didn't work.  
    My work around is to physically pull the power cable from the printer and reconnect it.  Once that happens, the HP utilities see it again, and the print job goes through.  Obviously, this is not the way it should work.  It seems there is something wrong with the driver on Mac OSX 10.7.2 - I would think there would be code to 'waken' the printer and submit the job, but apparently not.  
    Does anyone have any ideas on what is wrong with this configuration and/or driver?  

    Hello cfournival,
    As this is an older thread I want to verify that you are using the latest driver and sofware for Mac OSX.
    You can find information about it here
    Software & Driver Downloads - HP Deskjet 1000 Printer - J110a
    If I have helped you in any way click the Kudos button to say Thanks.
    The community works together, click Accept as Solution on the post that solves your issue for other members of the community to benefit from the solution.
    - Friendship is magical.

  • Problem with HP Deskjet 1000 J110 cut photo

      Hello,
    With any format the document or image is cut to instill
    about 2 CM, despite having tried with different programs, also to take away
    edges of the press, etc., etc., is that the printer does not estisce those last cm? original:
    http://postimg.org/image/dwyzuvoh5/
    printed: http://postimg.org/image/wodllbdzb/  Tancks. 

    @pz1,
    Welcome to the forums!
    I understand your print jobs are printing out with partial printing on them, and I hope to help!
    I am curious to know if the issue could be within the printer hardware itself, and would like you to print out a diagnostic test page to find out.
    Please click this link, follow all of the steps and let me know the results:
    Fixing Print Quality Problems for the HP Deskjet 1000 (J110), 2000 (J210), 3000 (J310), and HP Deskj...
    If you wish to send me a "thank you" for my response to help, click the thumbs up  below!
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • Deskjet 1000 J110 stopped checking ink levels

    Hi
    I have a Deskjet 1000 J110 and I'm running Windows 7.
    The HP software used to allow me to check ink levels, now it doesn't. I checked them no more than 2 weeks ago without a problem. Now, when I tried to check them, the option simply wasn't there. I'm not sure, but I think the shortcut on the HP menu folder is directing me to the Control Panel printers folder, not to the HP software like it used to.
    Anyone has any idea what the problem might be?
    Cheers!
    This question was solved.
    View Solution.

    Hi seileach,
    Welcome to the HP Forums, I hope you enjoy your experience!
    I read your post and see that the Printer Assistant isn't opening to view the ink levels when you click on the printer shortcut.
    I will be happy to help you.
    Try going to start, all programs, HP, Deskjet 1000 J110, then click on the Deskjet 1000 J110 again to see if the Printer Assistant will now open this way.
    If not, then most likely the driver is corrupted. I would uninstall and reinstall the printer software.
    Uninstalling the Printer Software.
    HP Deskjet 1000 Printer - J110a Drivers. 
    Select your operating system, click next and click on the software to download and install.
    Now try and access the Printer Assistant.
    Hope this helps.
    Thank you for posting on the HP Forums.
    Have a wonderful day!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • HP Deskjet 1000 J100a series ink cartrage replacement issue

    About a year ago I bought a Hp DeskJet 1000 J110a It worked great until I tried to change the ink Carthage I bought a double Carthage at Office Depot I believe it said 122 . It was HP. I never deviate from that. When I bought HP and installed the  61 I get a message that says these are the wrong cartilages for the printerthey way they are confederated. Please advise meThanks L Scott

    @pz1,
    Welcome to the forums!
    I understand your print jobs are printing out with partial printing on them, and I hope to help!
    I am curious to know if the issue could be within the printer hardware itself, and would like you to print out a diagnostic test page to find out.
    Please click this link, follow all of the steps and let me know the results:
    Fixing Print Quality Problems for the HP Deskjet 1000 (J110), 2000 (J210), 3000 (J310), and HP Deskj...
    If you wish to send me a "thank you" for my response to help, click the thumbs up  below!
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • How to add a new custom paper size? I am using a HP Deskjet 1000 J 110a printer.

    How to add a new custom paper size? I am using a HP Deskjet 1000 J 110a printer. I am using Windows XP home edition. The Custom option itself is not appearing in the process of selecting paper sizes in Printing preferences. I have installed this printer just today, but I bought it eight months back in Dubai. Could there be chance that since I purchased it in Dubai and I am using it in India, the software's not functioning properly. 
    Can you please help me with this problem immediately? Reply soon...

    Hi RajeshPujara,
    Please refer the link below to know the paper size supported by this printer.
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02231304&tmp_task=prodinfoCategory&cc=us&dlc=en...
    May I know the size of paper you are trying to print.
    Although I am an HP employee, I am speaking for myself and not for HP.
    --Say "Thanks" by clicking the Kudos Star in the post that helped you.
    --Please mark the post that solves your problem as "Accepted Solution"

  • Obtaining IP Address of HP Deskjet 1050 J410 series printer

    Hello! I recently downloaded a printer plug-in on my Android phone( Sony Xperia Z) and my phone asks me for my printer's IP adress. From where to acquire it? My printer's model is HP Deskjet 1050 J410 series

    Hello @megsborat, 
    Welcome to the HP Support Forums. I understand that you would like to learn how to find the IP address for your Deskjet 1050 printer.
    The Deskjet 1050 printer only supports a USB cable connection so it will not have an IP address.  I have included the Printer Specifications for the HP Deskjet 1050 for reference.
    Regards,
    Happytohelp01
    Please click on the Thumbs Up on the right to say “Thanks” for helping!
    Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
    I work on behalf of HP

  • How to SCAN w. usb cable connected from my deskjet F 4580 series printer

    HOW TO SCAN  [WITH USB CABLE CONNECTED TO MY PC] FROM MY DESKJETF4580 ALL IN ONE PRINTER ?

    If you have the HP full software installed, just press that "Scan" button on the printer.
    ======================================================================================
    * I am an HP employee. *
    ** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **
    ***Click on White “Kudos” STAR to say thanks!***

  • Deskjet 1000 not printing

    I recently got a new ink cartrage and tried pinting something for school but it wont print. It shows that i do have ink but when i try to print it gives me blank pages. HELP!

    Hello , Thanks for posting in the HP Forums, and welcome! I'd like to help you with the blank pages that are printing out from your HP Deskjet 1000 Printer. Have you tried printing anything in color? Or from an alternate program? If printing in color works okay, then it could be an issue with the cartridge that you purchased. Follow the steps in the document below to resolve your print quality issue.Fixing Print Quality Problems for the HP Deskjet 1000 (J110), 2000 (J210), 3000 (J310), and HP Deskjet Ink Advantage 2010 (K010a) Printer Series If printing in color does not work, and you are still having the issue from alternate programs, make sure you have the most recent version of the full feature driver installed on your computer. You can download it here - HP Deskjet Full Feature Software and Drivers I hope this helps!

  • HP Deskjet 1000 stopped printing

    Running Slackware 13.37, on 1686 with Athlon AMD XP2200+ under cups 1.4.6-i486 and HPLIP 3.113a on kernel 2.6.3.7.6-smp.
    Was printing fine when ink ran out, installed new black and ran hp-levels showing 80% color 100% black.  Tried to print from Firefox 4.0 and from command line both cases I get "Device Communications Error 5012.  Strange it would stop under this situation.  Is there a reset?  User and root both members of scanner and lp groups.  Now user attempts to run hp-levels yields:Unable to communicate with device (code=12):...  lsusb shows: Bus 001 Device 003: ID 03f0:8811 Hewlett-Packard
    Any thoughts or suggestions welcome

    @pz1,
    Welcome to the forums!
    I understand your print jobs are printing out with partial printing on them, and I hope to help!
    I am curious to know if the issue could be within the printer hardware itself, and would like you to print out a diagnostic test page to find out.
    Please click this link, follow all of the steps and let me know the results:
    Fixing Print Quality Problems for the HP Deskjet 1000 (J110), 2000 (J210), 3000 (J310), and HP Deskj...
    If you wish to send me a "thank you" for my response to help, click the thumbs up  below!
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • Problem with Deskjet 1000

    Image that should be one page is printing portions of the image on many pages.

    Arrgh....  OK, the "original" Deskjet 1000 was a 13"x19" printer from a dozen or so years ago that used 45 and 41 cartridges.  Sorry about that, the Deskjet 1000-J110 does support an ink level gauge.  I would suggest clicking on Start, Devices and Printers, right click on the Deskjet 1000, Printer Properties, Ports and make sure the checkbox is checked for "Enable bidirectional support".
    BTW, with ink supplies as small as the 61 I would suggest always having a spare on hand :-).
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Maybe you are looking for

  • Mini DVI to VGA or Mini DisplayPort to VGA

    I've used up all the HDMI connectors on my 1080p LCD, so need to use the VGA connection, which thankfully supports 1920 x 1080 native. I was in the Apple store today and noticed they sell both a mini DVI to VGA adapter, as well as a mini DisplayPort

  • If i open a new window instead of a new tab, in the new window does not appear the menu tab

    i want to open new windows instead of tabs and in the new window should appear the menu tab and scrolling up and down, but now with the new version the menu tab does not appear and i cannot scroll up and down.

  • Problem with recognition

    I have a 1st gen nano. It sometimes doesn't get recognized fora while but now it hasn't been recognized by the computer or any other device I try to connect it to for longer than 12 hours, which has never been the case before. I am starting to worry

  • Problem with quotes

    Hie, I want to use the quotes characters &laquo and &raquo (for example : &laquo test &raquo) in my HTML page built with DW8. When I display the page using FIREFOX, the result is OK. But when I use INTERNET EXPLORER6 then the quotes appear the wrong

  • PARALLEL option in oracle 8i

    Hi, I have a problem in using the parallel hint in my sql statement. I have enabled the parallel dml option, also given the parallel hint in the script. This works fine with the test database which is a clone of the production database. But it behave