HP DESKJET 1050 ALL IN ONE J410 SERIES.Bought in Mauritius

Deskjet 1050 not compatible with HP301 but uses HP61

Using HP301 or HP61 will depend on your region. Which country are you based in?
Finding and installing cartridges after moving to another country
http://h30434.www3.hp.com/t5/Ink-Toner-Cartridge-Printhead-Issues/Finding-and-installing-cartridges-...
Although I am an HP employee, I am speaking for myself and not for HP.
Twitter: @Ciara_B_HP

Similar Messages

HP DeskJet 1050 ALL-IN-ONE J410 series Printer Scanner stopped working suddenly

About a month back Scanner in my printer-scanner (DeskJet 1050 All-In-One J410 series) stopped working with a message on screen " HP Deskjet 1050 J410 series was not found". But the Printer was working fine. I have so far taken following steps with results against each -
a) HP Print & Scan doctor (HPPSdr.exe) showed HP Twain Scan faulty.
b) On advice from HP helpline, tried HP Deskjet Full Feature Software & Drivers (DJ1050_J410_1313.exe). It required uninstalling before installing. But uninstalling failed to happen.
c) Finally, with HP Printer Install Wizard (hppiw.exe) help it showed that Full Feature HP Software & Drivers is now installed. For its functionality, it called for its testing on 'print test page' and 'test scan'. After this, printer shows printing jobs in queue but will not print. At present it is limited to photocopying only without printing & scanning.
d) I am caught in a loop, because at the end of hppiw.exe message is '...if tests are not successful, HP recommends using HPPSdr.exe to diagnose and fix any problem' i.e. back to point (a) above.
Any solution to the above problem?

Hi there @sukuma ,
I can see that you have a thread open with @Futoji in regards to the issue however, no response. I would suggest completing his troubleshooting recommendations and reply back to continue the troubleshooting efforts. I hope that helps you!
Here is the link to your other thread: Troubleshooting Thread
Have a great day
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Hp deskjet 1050a all in one j410 series

have bought a new laptop with windows 8.1 but printer sofwear not compatable, my previous computer had windows xp. Do I need to buy a new printer or is there softwear I can download?
hope someone can help
thank you

Hi janicenew,
I understand that you are looking for software and drivers for you Deskjet 1050a for Windows 8.1. I suggest that you make sure that all the updates are done on your laptop before you begin. Please follow the steps in this document for Installing the Printer Software in Windows 8. You want to use "Method one: Use the HP Printer Install Wizard" it will work for Windows 8.1.
I am also including this link for HP Deskjet 1050 All-in-One Printer - J410a Drivers. If you would rather download and install on your own. Select your operating system (Windows 8.1 32 or 64 bit) and click next, scroll down and click on Driver - Product Installation Software, then choose either the full feature or basic software and drivers and download.
I hope this helped, let me know.
Thank you,
I worked on behalf of HP.

HP Deskjet 1050 All-in-One Printer series - J410A not printing photos

Hi,
It's been months since I tried to fix the photo printing of my printer and until now it's still not fixed.
My problem is that I can't print photos via windows photo viewer. When I hit print, it shows a printer icon on my task bar and it disappears. I am using Windows 7.
Also, if I check on Device Settings tab of my printer properties, the photo tray is missing. See screenshot:
I tried printing using Paint and IE9 and it printed but my problem is that the photos are too dark.
So I have two problems here:
1) I cannnot print via windows photo gallery and my photo tray is missing.
2) Printing to other applications like Paint and IE9 produces very dark photos.
This happened after I updated my driver. I tried switching back to my old driver and it printed but the photos are too dark already. When the printer was still new using the old driver, I had no problems with my photos and they look all good. I updated my driver because the time came when I cannot see my ink levels with my old driver. I have also tried uninstalling and reinstalling the drivers and the problems still persist.
Please help!! I have wasted a lot of photo paper and ink by trial and error. T^T

If you are having problems with printing photos, see if this document is of any assistance in finding the right settings:
--Print Photos Saved On Your Computer--
I would like to add that I have never seen a photo tray option in the Device Settings of the Printer's Properties. I checked all of mine and some had the duplex option here but no mention of a photo tray even if the printer had one. But while you're in that section, you may want to change it from "Letter" to the photo size you are trying to print (4x6, 3x5 etc).
One problem I had with your question regarding the photo tray, I didn't know this printer had a photo tray. I will post a picture below of this printer and when you reply, let me know where exactly this photo tray is in case I am just not seeing it.
When printing from IE9 or Paint, the images come out dark but what about an image in a Word document? Does that come out too dark as well? Can you make a copy of a normal photo and it come out dark too?
Answer those questions for me please and I will be happy to help.
Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
When a solution is found please mark the post that solves your issue.
Every problem has a solution!

Printing problem with HP deskjet 3050 all in one J610 series

I have a HP deskjet 3050 all in one J610 series which I am using with Windows Vista Version 6.0 (Build 6006: Service pack 2). Connecting is by USB port. I have not used the printer for some time, but have done all the maintence checks & it is good to go. When I want to print a letter the only thing that gets printed is the email address which is coloured blue. I think the problem is in the settings of the printer features. I can print the letter in gray scale but this is not easy to read and not suitable for business dealings.
I would appreciate help with this problem. A definition of the terms used in the printer features might help me resolve it by my self.
Thanks
This question was solved.
View Solution.

Hello @Tellen,
Thank you for visiting the HP Support Forums! I understand you are running into some print quality problems with your HP Deskjet 3050. I see when you attempt to print a letter you will only see the email address and its in blue ink.
First I would like you to click here to download and run the Print and Scan Doctor > www.hp.com/go/tools- It was designed by HP to provide users with the troubleshooting and problem solving features needed to resolve many common problems experienced with HP print and scan products connected to Windows-based computers.
What does the PSDR find? If you are still not getting black text, please continue here: Fixing Print Quality Problems for the HP Deskjet 3050 (J610) All-in-One Printer Series
If after the troubleshooting has been done and you are still seeing the issue leave me with the following information:
1. What is your current Operating system, Windows or Mac and which version?
2. How is the printer connected, USB or Wireless?
3. If you print a test page from the front panel do you see the same issue?
I hope to hear from you soon.
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

The HP Deskjet 3050A All-In-One J611 series printer I just bought is not compatible with my Mac Book Pro. What do I need to do?

I recently purchased an HP Deskjet 3050A All-In-One J611 series printer and it is not compatible with the version of the operating system on my mac book pro. I am currently running on OS X 10.4.11 and the printer is compatible with v10.5 or higher. What can I do to update the operating system on my Mac Book Pro?

10.5 will be harder to find & more expensive, I think I'd go for 10.6
Leopard requirements/10.5.x...
    * Mac computer with an Intel, PowerPC G5, or PowerPC G4 (867MHz or faster) processor
minimum system requirements
    * 512MB of memory (I say 1.5GB for PPC at least, 2-3GB minimum for IntelMacs)
    * DVD drive for installation
    * 9GB of available disk space (I say 30GB at least)
Apple no longer has it for sale.
Snow Leopard/10.6.x Requirements...
General requirements
   * Mac computer with an Intel processor
    * 1GB of memory (I say 2GB at least)
    * 5GB of available disk space (I say 30GB at least)
    * DVD drive for installation
    * Some features require a compatible Internet service provider; fees may apply.
    * Some features require Apple’s MobileMe service; fees and terms apply.
Which apps work with Mac OS X 10.6?...
http://snowleopard.wikidot.com/
It looks like they might still have it...
http://store.apple.com/us/product/MC573Z/A?fnode=MTY1NDAzOA

HP DeskJet 3055A All-In-One Jobs Series margin

Hi,
I recently reinstalled Windows 7 on my laptop and ever since the top margin is too big and bottom margin too small.
I haven't found a setting to correct this.
The drivers are installed from the HP site and are the drivers for the HP DeskJet 3050A All-In-One J611 Series as suggested by the HP site. I ran all the HP Print and Scan doctor and the HP Hardware Diagnose Progranm 4.1.
Does anyone know who I can fix this problem coz this is very annoying:
Everything I print a art of the bottom falls of th page and isn't printed?
Thanks,
Bas

Hi @basf ,
I understand that you are having issues with the top and bottom margins not printing properly. I will do my best to assist you with this issue.
What application are you using?
Check the page setup in the application you are printing from?
Try another application to see if you have the same results.
Here is a document for checking the paper size and paper type settings from the print driver.
Changing Print Settings in Windows 8.
How is the printer connected? (USB/Ethernet/Wireless)
If you need further assistance, just let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

HP Deskjet 3050A All-in-One J611 Series - getting exact driver to download

I need to download a driver for my (per printer label) "HP Deskjet 3050A All-in-One J611 Series" -- but at hp.com, see listed only J611-Series models with postfixed abc letters "a" to "k" ... and one w/o a postfixed abc letter, but that lacks "J611" in its model name.
Also, my printer label does not prefix "e-" to the printer name.
Would the driver for "J611-a" work with my printer?
Or the driver for "HP Deskjet 3050A All-in-One" that lacks "J611"?
Thank you.

I need to get the printer going

HP DESKJET 3050A ALL-IN-ONE J611 series

My friends.
My problem is very simple.
I have a printer "HP DESKJET 3050A ALL-IN-ONE J611 series" and she can not work properly on my laptop.
I have windowns 8.1 as soy experienced all your drivers and the printer can not work well.
Sometimes I can install it but the next day the computer can no longer print anything.
And so before bedtime to trash this printer and choose another brand'm here to request v.ajuda.
I would appreciate someone answer me for email
[Personal Information Removed]
greetings
jose melo

Hi @josedemelo , and welcome to the HP Forums!
I understand you're experiencing print issues. I would like to help.
Are you able to make a copy without issue?
Are you connected via a USB cable or a wireless connection?
I would recommend performing a power reset on your printer. Disconnect the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug the printer back in. Ensure you plug the printer directly to a wall outlet. Make sure to bypass any sort of surge protector or power bar.
I would then suggest downloading and running the HP Print and Scan Doctor.
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Why can't I sign up to eprint? HP Deskjet 3050 All in one J611 series

Website will not let me register my HP Deskjet 3050 All in one J611 series for e-print

http://support.apple.com/kb/DL907

HP Deskjet 3050 All-in-One Printer series - J6

HP Deskjet 3050 All-in-One Printer series - J6? what a load 0f rubbish,only one place for this the bin!
Purchased less than a year ago countless problems with wireless reinstaled more times than I can think and now paper jams so off to the bin, never to buy HP products again, being disabled is hard enough but having to going shopping for a new printer this I could do without. thank you HP.
Brian

I am sorry to hear that you are having that issue with the printer. If the printer is under a year old from the date of purchase, please call into HP Total care. The printer comes with a factory warranty that gives the owner free tech support on the product. Paper jams are a hardware issue. If all troubleshooting steps are done on the phone with the agent and the product is still not working. That agent who is assisting you will be able to give further options on what can be done. The number for US and Canada customers is 800-474-6836. Customers in other countries can find contact information here. I hope that this helps.
I am a former employee of HP...
How do I give Kudos?| How do I mark a post as Solved?

How do i connect HP Deskjet 3050 All-in-One J610 Series to my Laptop

I need help to connect my HP Deskjet 3050 All-in-One J610 Series to my Samsung Laptop, can any1 help pls

Hi,
What is the operating system on your Samsung ? How do you want to connect it ? The following link is for Windows drivers:
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&lc=en&dlc=en&product=4066452
For Android, please use the following app:
https://play.google.com/store/apps/details?id=com.hp.android.print&hl=en
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Which external fax modem is compatible with deskjet 3050 All-In-One j611 series

I would like to use my HP DESKJET 3050 All-In-One j611 series printer to send and receive faxes. Which external fax modem do you recommend?

Hi 1937,
The Deskjet 3050 j611 printer doesn't support faxing. If you need a printer with fax capabilities check out the following link below.
http://shopping2.hp.com/en_US/home-office/-/products/Printers/Printers?SearchParameter=%26%40QueryTe...
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

How do I connect my HP Deskjet 1050 All-in-One Printer - J410a to a wireless connection

I have a
HP Deskjet 1050 All-in-One Printer - J410a
I am connected to a computer but would also like to connect it to my laptop wirelessly.
Can't do it. Must be doing something wrong. Need help thanks.

Hi @5468,
Welcome to the HP Forums!
I noticed that you are wondering how to connect your HP Deskjet 1050 All-in-One Printer - J410a to a wireless connection. I am happy to look into this for you!
According to your printer's specifications and the Setup Poster, this printer can only be connected to a computer via a USB 2.0 printer cable connection. This printer does not have wireless capabilities.
Hope this answers your question, and have a great day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

How do I change my HP Deskjet 3050A All-In-One J611 Series to draft mode

How do I change my HP Deskjet 3050A All-In-One J611 Series to draft mode? I have read some of the "solutions," but they don't make any sense to me. I need simple instructions. Thanks!

Hi there!
Try these steps that I have posted below. This will change the settings for all print jobs, so you will need to go back in to these settings if you wish to change the quality back to normal, best, etc.
Source
Once you are in the Printing Preferences window, you will see a Paper/Quality tab, click on it and you can change the Quality to Draft here.
That should work for you! Let me know if this helps
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

HP DESKJET 1050 ALL IN ONE J410 SERIES.Bought in Mauritius

Similar Messages

Maybe you are looking for