HP DeskJet 1050 ALL-IN-ONE J410 series Printer Scanner stopped working suddenly

About a month back Scanner in my printer-scanner (DeskJet 1050 All-In-One J410 series) stopped working with a message on screen " HP Deskjet 1050 J410 series was not found". But the Printer was working fine. I have so far taken following steps with results against each -
a) HP Print & Scan doctor (HPPSdr.exe) showed HP Twain Scan faulty.
b) On advice from HP helpline, tried HP Deskjet Full Feature Software & Drivers (DJ1050_J410_1313.exe). It required uninstalling before installing. But uninstalling failed to happen.
c) Finally, with HP Printer Install Wizard (hppiw.exe) help it showed that Full Feature HP Software & Drivers is now installed. For its functionality, it called for its testing on 'print test page' and 'test scan'. After this, printer shows printing jobs in queue but will not print. At present it is limited to photocopying only without printing & scanning.
d) I am caught in a loop, because at the end of hppiw.exe message is '...if tests are not successful, HP recommends using HPPSdr.exe to diagnose and fix any problem' i.e. back to point (a) above.
Any solution to the above problem?

Hi there @sukuma ,
I can see that you have a thread open with @Futoji in regards to the issue however, no response. I would suggest completing his troubleshooting recommendations and reply back to continue the troubleshooting efforts. I hope that helps you!
Here is the link to your other thread: Troubleshooting Thread
Have a great day
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Similar Messages

  • HP DESKJET 1050 ALL IN ONE J410 SERIES.Bought in Mauritius

    Deskjet 1050 not compatible with HP301 but uses HP61

    Using HP301 or HP61 will depend on your region. Which country are you based in? 
    Finding and installing cartridges after moving to another country
    http://h30434.www3.hp.com/t5/Ink-Toner-Cartridge-Printhead-Issues/Finding-and-installing-cartridges-...
    Although I am an HP employee, I am speaking for myself and not for HP.
    Twitter: @Ciara_B_HP

  • The HP Deskjet 3050A All-In-One J611 series printer I just bought is not compatible with my Mac Book Pro.  What do I need to do?

    I recently purchased an HP Deskjet 3050A All-In-One J611 series printer and it is not compatible with the version of the operating system on my mac book pro.  I am currently running on OS X 10.4.11 and the printer is compatible with v10.5 or higher.  What can I do to update the operating system on my Mac Book Pro? 

    10.5 will be harder to find & more expensive, I think I'd go for 10.6
    Leopard requirements/10.5.x...
        *  Mac computer with an Intel, PowerPC G5, or PowerPC G4 (867MHz or faster) processor
    minimum system requirements
        * 512MB of memory (I say 1.5GB for PPC at least, 2-3GB minimum for IntelMacs)
        * DVD drive for installation
        * 9GB of available disk space (I say 30GB at least)
    Apple no longer has it for sale.
    Snow Leopard/10.6.x Requirements...
    General requirements
       * Mac computer with an Intel processor
        * 1GB of memory (I say 2GB at least)
        * 5GB of available disk space (I say 30GB at least)
        * DVD drive for installation
        * Some features require a compatible Internet service provider; fees may apply.
        * Some features require Apple’s MobileMe service; fees and terms apply.
    Which apps work with Mac OS X 10.6?...
    http://snowleopard.wikidot.com/
    It looks like they might still have it...
    http://store.apple.com/us/product/MC573Z/A?fnode=MTY1NDAzOA

  • Hp deskjet 1050a all in one j410 series

    have bought a new laptop with windows 8.1 but printer sofwear not compatable,   my previous computer had windows xp. Do I need to buy a new printer or is there softwear I can download?
    hope someone can help
    thank you

    Hi janicenew,
    I understand that you are looking for software and drivers for you Deskjet 1050a for Windows 8.1. I suggest that you make sure that all the updates are done on your laptop before you begin. Please follow the steps in this document for Installing the Printer Software in Windows 8. You want to use "Method one: Use the HP Printer Install Wizard" it will work for Windows 8.1.
    I am also including this link for HP Deskjet 1050 All-in-One Printer - J410a Drivers. If you would rather download and install on your own. Select your operating system (Windows 8.1 32 or 64 bit) and click next, scroll down and click on Driver - Product Installation Software, then choose either the full feature or basic software and drivers and download.
    I hope this helped, let me know.
    Thank you,
    I worked on behalf of HP.

  • I have a hp deskjet 2050 all-in-one j510 series printer wired it and ran cd still not printing what

    i have rechecked wires not sure what i did printer will not print please help

    Hi, Yesterday I bought the above printer and installed it on my Windows XP but when I click for the printer to print there is an error messsage that comed up bizsupport2.austinhp.. I have no idea what this means all I know is my printer is not printing
    Can someone please give me any help
    Thanks

  • I have a HP deskjet 3050 All-In-one J610 series printer.

    How long do I have to wait for the printer to find the IP address? If I want to do it manually what are the 3 IP addresses?

    I would manually clean the contacts on the cartridges and inside the printer. That process is outlined for your model of printer in step three of this document here.  The rest of the document does not apply to your issue, but it does a great job on giving step by step instructions  on the manual cleaning process and lists the materials that one needs to use. The manual cleaning will help insure that build up on the contacts is not the cause of the print quality issue that you are having. I hope that this helps. 
    I am a former employee of HP...
    How do I give Kudos?| How do I mark a post as Solved?

  • HP deskjet 3050 all-in-one J610 series printer won't recognize new network

    I have recently changed internet provider and my network setting have changed.  My printer is not recognizing my new network - help

    Well what exactly changed?  New equipment?  New router?  New Gateway?  New modem?  Wired or wireless connection?  OS of computer?  Reinstalled the software?  Reinstalled the drivers?  Detail everything in order on what you are trying to do and where in the manual what steps you are following.
    Say thanks by clicking the Kudos Thumbs Up to the right in the post.
    If my post resolved your problem, please mark it as an Accepted Solution ...
    I worked for HP but now I'm retired!

  • HP Deskjet 3050 All-in-One J610 series printer problem

    I can't get anything to print.  I removed the color cartridge and failed to replace it for several days.  The printer was not used during this time.  After replacing the cartridge,  I tried to print a document and  got a message stating no printer was installed.  I finally uninstalled the printer and reinstalled it.  It shows to be properly installed.  I am still unable to print.  What do I need to do now?

    Hi Gran_6
    I understand you are not able to print and on the computer and you had a message stating that the printer wasn't installed but you installed the printer software and still can't print.
    Try and print a hardware self test from the printer.
    Go to setup, printer report.
    I would download and run the Print and Scan Doctor to fix common printing and scanning
    problems.
    If you require further assistance please provide the following so I can assist you better.
    Did the self test print?
    What were the results of the Print and Scan Doctor? (did it print or scan, any error messages)
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Which external fax modem is compatible with deskjet 3050 All-In-One j611 series

    I would like to use my HP DESKJET 3050 All-In-One j611 series printer to send and receive faxes. Which external fax modem do you recommend?

    Hi 1937, 
    The Deskjet 3050 j611 printer doesn't support faxing. If you need a printer with fax capabilities check out the following link below. 
    http://shopping2.hp.com/en_US/home-office/-/products/Printers/Printers?SearchParameter=%26%40QueryTe...
    I am an HP employee.
    Say Thanks by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as "Accepted Solution"

  • Printing problem with HP deskjet 3050 all in one J610 series

    I have a HP deskjet 3050 all in one J610 series which I am using with Windows Vista Version 6.0 (Build 6006: Service pack 2).  Connecting is by USB port.  I have not used the printer for some time, but have done all the maintence checks & it is good to go.  When I want to print a letter the only thing that gets printed is the email address which is coloured blue.  I think the problem is in the settings of the printer features.  I can print the letter in gray scale but this is not easy to read and not suitable for business dealings.
    I would appreciate help with this problem.  A definition of the terms used in the printer features might help me resolve it by my self.
    Thanks
    This question was solved.
    View Solution.

    Hello @Tellen,
    Thank  you for visiting the HP Support Forums! I understand you are running into some print quality problems with your HP Deskjet 3050. I see when you attempt to print a letter you will only see the email address and its in blue ink.
    First I would like you to click here to download and run the Print and Scan Doctor > www.hp.com/go/tools- It was designed by HP to provide users with the troubleshooting and problem solving features needed to resolve many common problems experienced with HP print and scan products connected to Windows-based computers.
    What does the PSDR find? If you are still not getting black text, please continue here: Fixing Print Quality Problems for the HP Deskjet 3050 (J610) All-in-One Printer Series
    If after the troubleshooting has been done and you are still seeing the issue leave me with the following information:
    1. What is your current Operating system, Windows or Mac and which version?
    2. How is the printer connected, USB or Wireless?
    3. If you print a test page from the front panel do you see the same issue?
    I hope to hear from you soon.
    HevnLgh
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • HP DeskJet 3055A All-In-One Jobs Series margin

    Hi,
    I recently reinstalled Windows 7 on my laptop and ever since the top margin is too big and bottom margin too small.
    I haven't found a setting to correct this.
    The drivers are installed from the HP site and are the drivers for the HP DeskJet 3050A All-In-One J611 Series as suggested by the HP site. I ran all the HP Print and Scan doctor and the HP  Hardware Diagnose Progranm 4.1.
    Does anyone know who I can fix this problem coz this is very annoying:
    Everything I print a art of the bottom falls of th page and isn't printed?
    Thanks,
    Bas

    Hi @basf ,
    I understand that you are having issues with the top and bottom margins not printing properly. I will do my best to assist you with this issue.
    What application are you using?
    Check the page setup in the application you are printing from?
    Try another application to see if you have the same results.
    Here is a document for checking the paper size and paper type settings from the print driver.
    Changing Print Settings in Windows 8.
    How is the printer connected? (USB/Ethernet/Wireless)
    If you need further assistance, just let me know.
    Have a nice day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • HP Deskjet 3050A All-in-One J611 Series - getting exact driver to download

    I need to download a driver for my (per printer label) "HP Deskjet 3050A All-in-One J611 Series" -- but at hp.com, see listed only J611-Series models with postfixed abc letters "a" to "k" ... and one w/o a postfixed abc letter, but that lacks "J611" in its model name.
    Also, my printer label does not prefix "e-" to the printer name.
    Would the driver for  "J611-a" work with my printer?
    Or the driver for "HP Deskjet 3050A All-in-One" that lacks "J611"?
    Thank you.

    I need to get the printer going

  • HP DESKJET 3050A ALL-IN-ONE J611 series

    My friends.
    My problem is very simple.
    I have a printer "HP DESKJET 3050A ALL-IN-ONE J611 series" and she can not work properly on my laptop.
    I have windowns 8.1 as soy experienced all your drivers and the printer can not work well.
    Sometimes I can install it but the next day the computer can no longer print anything.
    And so before bedtime to trash this printer and choose another brand'm here to request v.ajuda.
    I would appreciate someone answer me for email
    [Personal Information Removed]
    greetings
    jose melo

    Hi @josedemelo , and welcome to the HP Forums!
    I understand you're experiencing print issues. I would like to help.
    Are you able to make a copy without issue?
    Are you connected via a USB cable or a wireless connection?
    I would recommend performing a power reset on your printer.  Disconnect the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug the printer back in. Ensure you plug the printer directly to a wall outlet. Make sure to bypass any sort of surge protector or power bar.
    I would then suggest downloading and running the HP Print and Scan Doctor.
    Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
    Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
    Jamieson
    I work on behalf of HP
    "Remember, I'm pulling for you, we're all in this together!" - Red Green.

  • Why can't I sign up to eprint? HP Deskjet 3050 All in one J611 series

    Website will not let me register my HP Deskjet 3050 All in one J611 series for e-print

    http://support.apple.com/kb/DL907

  • How do i connect HP Deskjet 3050 All-in-One J610 Series to my Laptop

    I need help to connect my HP Deskjet 3050 All-in-One J610 Series to my Samsung Laptop, can any1 help pls

    Hi,
    What is the operating system on your Samsung ? How do you want to connect it ? The following link is for Windows drivers:
        http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&lc=en&dlc=en&product=4066452
    For Android, please use the following app:
       https://play.google.com/store/apps/details?id=com.hp.android.print&hl=en
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Maybe you are looking for

  • C3-01 - Does Latest Software Improve WiFi Performa...

    Hi all According to the Nokia website, the current software for the C3-01 touch & type is v.7.51, but the most up to date version that I am able to install via Nokia Suite is v.7.15. I suspect this is because my phone is on the Orange/EE network in U

  • IDVD won't burn my project!!

    I have FCP and I exported using the Quicktime movie option. I took it into iMovie, organized it, and saved it. I went to iDVD, pulled the movies, go to burn the disc and the following happens: I insert the disk when prompted, it then says "waiting fo

  • ODI installation out of Oracle home

    Hi, I have to install Oracle Data Integrator on a development server where EPM 11.1.2 is already installed. I encounter the following error after setting the install folder (I leave it to default: D:\Oracle\Middleware\EPMSystem11R1): OUI-10044: The s

  • Total number of records in given range.

    total number of records in given range. Hi all , I have the Requirement as follows. I Have a Table which Contains Duplicate Dates like 22.11.2006 15.11.2006 31.10.2006 15.09.2006 15.09.2006 14.09.2006 15.09.2006 14.09.2006 16.09.2006 etc... The input

  • Gcc won't compile hello world

    Hello World : #include<iostream> using namespace std; int main () cout << "what am I doing wrong?"; return 0; All the strace sh!t execve("/usr/bin/gcc", ["gcc", "hello.cpp"], [/* 43 vars */]) = 0 uname({sys="Linux", node="stryder", ...}) = 0 brk(0) =