HP Deskjet 1280 Printer intallation in 64 bit Windows Server 2012

We are not able to get suitable driver for 64 bit Windows server 2012 for printer HP Deskjet 1280. The same printer is working in Windows 2003 server. Printer manufacturer has not developed their driver fro WS-2012. Kindly help in resolving the issue.

Hi,
Can you please go through below Technet thread.
http://social.technet.microsoft.com/Forums/windowsserver/en-US/122542f7-19c2-417a-ade9-1211d4f96d13/cant-add-the-x86-drivers-of-hp-deskjet-1280-to-windows-2008-64-bit-server
Regards,
Manjunath Sullad

Similar Messages

Can we run 32 bit application over 64 bit windows server 2012 ?

Can we run 32 bit application over 64 bit windows server 2012 ?

Hi,
Thanks for your question.
Since the two cases that you posted are the same, I will merge them so that you can get a better assistance. Thanks for your understanding
and support.
In addition, according to your question, it depends on the applications. Some applications designed for the 32-bit version of Windows
will work on the 64-bit version of Windows, but some are not. Before you install the application, you’d better check if it is compatible with 64-bit version of Windows Server 2012.
Best regards,
Susie

Hp deskjet 2545 printer driver not supporting on windows server 2008 r2

I have purchased a 3 in 1 hp deskjet 2545 printer. I am trying to configure in on my home laptop (HCL) operating system: windows server 2008 R2, but unable to configure it. customer support executive told me hp deskjet 2545 printer driver is not compatible on windows server 2008 R2. but I have checked in my office and it is working fine on my office 2008 server. Please help.

Hello Arvindk,
Welcome to the HP Support Forums! I understand you are trying to use your HP Deskjet 2545 with your Windows Server 2008 R2. Because you are using a server your question will be best answered on the Commercial Forums: http://h30499.www3.hp.com/hpeb/
I was able to find this document for Installing the Printer Software on Windows Server 2003 or 2008, which may be helpful for you.
Thanks,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Printing Problem with Epson LX-300+ii and LX-310 in Windows Server 2012 R2 64-bit

I recently installed Windows Server 2012 R2 64-Bit.
We have Printer Epson LX-300+ii and LX-310 (dot-matrix) that we share among users. Each user access the Server using Remote Desktop. From previous experience with Windows Server 2008, I knew that these printers will be problematic, especially regarding
the Easy Print driver.
And I was right, using the Easy Print driver, I got the following result:
And so, I did manual mapping & disable the "Use Remote Desktop Easy Print printer driver first". Haha, what a surprise, I got the following result:
And so I uninstalled the printer driver, and install it again, thinking that I might chose a wrong driver, but.... same result. I know for sure that I chose the correct driver.
Next, I tried connecting the printer DIRECTLY to the server. Log-in to the Server directly,
not using Remote Desktop. And tried printing again, haha... really... what a surprise... I got the same problem here !!!
So now I know the problem is not the Easy Print driver, not mapping or registry problem either. It's the print driver. This is SUPER FRUSTRATING, I tried the same driver from the same CD in Windows 8.1 64-Bit with no problem. I tried it too in Windows 7
32-Bit with no-problem either. But somehow, this driver is problematic in Windows Server 2012 R2.
Any help? Anybody else bump into this same problem ? I'm close to giving up, been spending too much time figuring out this damn thing.
Andy

Hi Bulent Sahin,
Thank you for your reply, I tried IBM Graphics driver, but the result is equally as bad. But your answer inspire me to try different drivers. And so, the closest & best driver that I could use now is EPSON ESC/P 9pin V4 Class Driver
It's not as good as I would expect, but at least now, it's acceptable & readable. I can't believe that I'm the only one who have this problem
Thank you Mr. Sahin

How to install Windows Server 2012 as a Virtual Machine on Window 7 64 bit machine

Hi All,
I need to install virtual Window Server 2012 on Window 7 machine(8gb ram,64 bit machine).
Please give me the list of required softwares to install. If possible the please give download link as well.
Thanks
mit

Since you're on Windows 7 I'd probably go for using VirtualBox
https://www.virtualbox.org/ to host the virtual machine.
Downloading 2012 depends what you're after really, if you've got TechNet / MSDN then you can download it from there, otherwise you'd need to have a licenced copy. You can download 180 day evaluation versions from the Microsoft website here :
2012 - http://technet.microsoft.com/en-gb/evalcenter/hh670538.aspx
2012 R2 -
http://technet.microsoft.com/en-gb/evalcenter/dn205286.aspx

Windows Server 2012 R2 print issues

We are using terminal server with Windows Server 2012 R2. Our users are using Windows 7 Embedded thin clients with MSTSC RDP 8.0. We are using network printers.
There is problem with printing from Adobe Reader. We are using Adobe Reader 11.0.06. Sometimes users cannot print from Adobe Reader with error message "Printer not found" even though we can print on same printer from other software. This problem can be solved by relogging user, but in our enterprise environment, this is not acceptable solution.
Thanks for your help.

I had the same issue with another Canon UFRII that was not on the network. Canon has some monitor software that attempts to query the device and this threw back Invalid Parameter when the device did not exist. Is your device on the network?
Failed for get value IrregularPaper for printer . Error code 87(ERROR_INVALID_PARAMETER)
     InternalGetPrinterDataFromPort
3328
4984       0
0
LOCALSPL_TRACE
Failed for get value udpEnable for printer . Error code 87(ERROR_INVALID_PARAMETER)
Can you use one of the UFR drivers Canon included with the operating system?
Canon UFR II Color Class Driver
Canon UFR II B/W Class Driver
Alan Morris Windows Printing Team

Oracle client 32/64 bit on Crystal Server 2013 and Windows Server 2012

I'm getting the error "Unknown Database Connector Error" when I run report on the server and it works OK on crystal designer 2013.
Been reading this thread 32&64 bit Oracle Client but not much help there.
Here are the details
System
Windows Server 2012
Crystal Server 2013 SP5
Crystal Server has been installed and appears to work fine. I was able to develop a brand new report locally and saved it to the server and it displays ok. Of course when I click on refresh on the report, it will error out due to database connection it looks like.
We have installed both oracle client drivers 64 and 32. 64 was installed first and then 32.The path has been modified so that the 32 shows up first.
I even ensure oracle_home and oracle_home32 are specified and restarted the server. I still get the same error.
The tns entries are also located in both installs of oracle client...
What might be the issue?

Oracle Database Client 12.1.0.2.0 (32-bit and 64-bit installed)
Installation Type: Custom
COMPONENTS INSTALLED:
SQLPLUS
ORACLE NET
We are currently not using an ODBC connection.
We installed Crystal 2013 Server SP05. This is the sole package installed (believe it's the latest version) without any extra patch package installed (believe no patch needed as it's the latest version).

V3 Printer driver on Windows Server 2012

Hello there.....
I have installed Print services on Windows Server 2012. I have read several forum and found that it is a best practice to install V3 drivers if workstations run on Windows 7.
Our all of workstations have windows 7 so I want to install v3 printer drivers. we have printers of HP and Canon mostly.
So can anyone tell me how can I get V3 drivers of HP Laserjet P4015 for example...
I have installed a driver but found its v4.
Please tell me how can I install V3 driver for HP, Canon printers.....
Thanks
Kind Regards
Namvi

You would need to use the V3 drivers that the vendors provide to Windows Update
http://catalog.update.microsoft.com/v7/site/Home.aspx
or from the vendors website
Alan Morris Windows Printing Team

Administrator cannot change printer properties on "Advanced" tab from "Devices and Printers" on Windows Server 2012 R2

Hello, dear Colleagues.
User with administrators rights cannot change printer properties on "Advanced" tab from "Devices and Printers" on Windows Server 2012 R2.
If to launch "Devices and Printers" on server, all printer properties on "Advanced" tab are inactive (see screen below).
But I can change it manually with "Print Management". Features become active.
The main purpose - to uncheck "Enable advanced printing features" with powershell
scripts.
$erroractionpreference = "continue"
$colPrinters = Get-Wmiobject -Class win32_printer -computername print_server -Filter "Name like 'printer1' or Name like 'printer2' or Name like 'printer3' or Name like 'printer4' or Name like 'printer5' or Name like 'printer6'" # get printers on server and filter with names
ForEach ($objPrinter in $colPrinters) { # get printer details from WMI
If ($objPrinter.RawOnly -ne "True") { # check that Advanced printing fetaures is turned on
Write-host $objPrinter.Name
Write-Host $objPrinter.RawOnly
$objPrinter.RawOnly = "True" # Untick and update the object in WMI
$objPrinter.Put()
It works on Windows 7 workstation, but does not on print server Windows Server 2012 R2 with error
Exception calling "Put" with "0" argument(s): "Generic failure "
At \\print_server\c$\DisableAdvancedPrintingFeatures.ps1:8 char:17
+ $objPrinter.Put()
+ ~~~~~~~~~~~~~~~~~
+ CategoryInfo : NotSpecified: (:) [], MethodInvocationException
+ FullyQualifiedErrorId : DotNetMethodException
Can you help me with that? Look like somethings with rights.
Thank you.

Hello, Alan
Morris.
Thanks for your reply.
I've tried to runs PS Script both locally and remotely, previously running Powershell ISE as Administrator.
I've noticed interesting thing - if to
check "Enable advanced printing features"
manually thru Print Management snap-in, script works fine. But, time to time after some manipulations on print server, this advanced feature returns to enabled state automatically by system, I think. In this case PS Script does not work. Next, if to disable
feature manually again (thru Print Management snap-in),
and enable manually again, PS Script will work. Very strange situation.
Thanks.

UnsatisfiedLinkError running 32 bit on a 64 bit windows server 2008

Hi,
I have developped a JNI solution a while back and it runs fine on a Windows 2008 server 32 bit computer, but when running on a 64 bit windows server 2008 it gives me the following exception
Exception in thread "main" java.lang.UnsatisfiedLinkError: <name of the library> (JVMPORT015E Unable to resolve DLL references - a prerequisite DLL may be missing)
at java.lang.ClassLoader.loadLibraryWithPath(ClassLoader.java:957)
at java.lang.ClassLoader.loadLibraryWithClassLoader(ClassLoader.java:926)
at java.lang.System.loadLibrary(System.java:453)
at xxx.jni.xxx.<clinit>(Unknown Source)
at java.lang.J9VMInternals.initializeImpl(Native Method)
at java.lang.J9VMInternals.initialize(J9VMInternals.java:192)
at be.xxx.initialize(Unknown Source)
at be.xxx.main(Unknown Source)
I tried specifying the library path by using the -Djava.library.path= property (once again this works fine on 32 bit version) but the same error.
I used the old Visual studio 6 compiler to create the 32 bit DLL. Do I need to re-compile the DLL for 64 bit? And any pointers on how to do that?
I am a C++ newbie so any help would be appreciated

Don't feel like researching it myself but you might start here and get back to us with what you find.
[http://blogs.msdn.com/oldnewthing/archive/2008/10/20/9006720.aspx]
Although seems conclusive I would research it more since 32bit apps must run somehow.
I suspect that you will need a different VS IDE though to make a 64 bit build.

Windows Server 2012 Standard - HP OfficeJet Pro 8600 Plus printer not working after promoting to Domain Controller / AD Services

An associate and myself installed the built-in drivers for the HP OfficeJet Pro 8600 Plus multi-function (network) printer on a Windows Server 2012 Standard server installation and everything worked fine whenever I want to print anything directly from the
Windows Server machine (there's a reason for this, so please understand that ;) ).
We were able to print without any problems from the Windows Server 2012 machine, using the drivers from Microsoft. Mainly, because HP has not listed any specific support for Windows Server 2012, only Windows Server 2008 R2, however, the drivers that
came with Windows 2012 seem to work very well.
PROBLEM: I later had to promote the Windows Server 2012 to a Domain Controller, and created the Active Directory configurations, even enabled the Print Services. After doing all of that, the HP printer will not print anything. It's like all print
requests directly from the Windows Server go to Nil.
Has anyone encountered a problem like this before? The only thing I can think of is that after perhaps something affected printing directly once we promoted the server to being a DC, and added other features / roles. I even tried installing the
HP drivers for Windows Server 2008 R2, and the results are still the same...nothing prints. Trust me, the printer is set as the Default Printer and even when choosing to print, we make sure the HP OfficeJet Pro is selected, and is on, as other Windows
Client PC's can print to it directly.
Does anyone have any suggestions we could try? Thanks in advance.

While it is quite a while since this was posted - I can concur a similar issue exists.
We have spent the better part of a day trying to work out why other HP printers work fine but our 8620 prints are not printing and going to Nil. The print server is hosted on a shared DC. Comparing to the initial posters details, for some reason
it seems to be most commonly related to the OfficeJet Pro 8600/8610/8620/8630 series printers.
I ended up doing a print server migration from the domain controller to stand alone host and all printers now work from a single server rather than a mix. Domain controller OSes varied from 2008, 2012, 2012 R2 (tested with multiple) and only after
all of those failed then tried a stand alone server os machine as a last resort which worked fine. Printing directly from Win 7 / 8 /8.1 clients to the IP always worked.

Connect Oracle 11g (64-bit windows server) to Microsoft SQL Server 2000

Hi all,
I am trying to connect:
Oracle 11g (64-bit windows server) to Microsoft SQL Server 2000 (32-bit) on a different machine.
1) I have create an ODBC connection (called:GALAXY) which connects.
2) created a init.ora called it initgalaxy.ora in $oracle_home\hs\admin
HS_FDS_CONNECT_INFO = GALAXY
HS_FDS_TRACE_LEVEL = on
3) modified the listener.ora file as below
# listener.ora Network Configuration File: E:\Ora11g\product\11.1.0\db_1\network\admin\listener.ora
# Generated by Oracle configuration tools.
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = BIU01)(PORT = 1521))
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = extproc0))
SID_LIST_LISTENER=
(SID_LIST=
(SID_DESC =
(GLOBAL_DBNAME = HEX.BIU01.kingsch.nhs.uk)
(ORACLE_HOME = E:\Ora11g\product\11.1.0\db_1)
(SID_NAME = HEX)
(SID_DESC=
(SID_NAME = galaxy)
(ORACLE_HOME = E:\Ora11g\product\11.1.0\db_1)
(PROGRAM = dg4odbc)
(SID_DESC =
(PROGRAM = EXTPROC)
(SID_NAME = PLSExtProc)
(ORACLE_HOME = E:\Ora11g\product\11.1.0\db_1)
4) modified the tnsnames.ora file is as follows
GALAXY =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = BIU01.kingsch.nhs.uk)(PORT = 1521))
(CONNECT_DATA =
(SID = galaxy)
(HS = OK)
HEX =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = BIU01.kingsch.nhs.uk)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = HEX)
5) restarted the listener
6) created a public database connect
create PUBLIC DATABASE LINK "GALAXY" CONNECT TO "USER" IDENTIFIED by "PWD" USING 'galaxy';
This is the error message I can sell in $oracle_home\hs\admin\trace
Oracle Corporation --- MONDAY APR 27 2009 11:54:18.370
Heterogeneous Agent Release
11.1.0.6.0
Oracle Corporation --- MONDAY APR 27 2009 11:54:18.370
Version 11.1.0.6.0
HOSGIP for "HS_FDS_TRACE_LEVEL" returned "ON"
HOSGIP for "HS_OPEN_CURSORS" returned "50"
HOSGIP for "HS_FDS_FETCH_ROWS" returned "100"
HOSGIP for "HS_LONG_PIECE_TRANSFER_SIZE" returned "65536"
HOSGIP for "HS_NLS_NUMERIC_CHARACTER" returned ".,"
HOSGIP for "HS_FDS_RECOVERY_ACCOUNT" returned "RECOVER"
HOSGIP for "HS_FDS_TRANSACTION_LOG" returned ""HS_TRANSACTION_LOG""
HOSGIP for "HS_FDS_TIMESTAMP_AS_DATE" returned "TRUE"
HOSGIP for "HS_FDS_CHARACTER_SEMANTICS" returned "FALSE"
HOSGIP for "HS_FDS_MAP_NCHAR" returned "TRUE"
HOSGIP for "HS_FDS_RESULT_SET_SUPPORT" returned "FALSE"
HOSGIP for "HS_FDS_PROC_IS_FUNC" returned "FALSE"
HOSGIP for "HS_FDS_REPORT_REAL_AS_DOUBLE" returned "FALSE"
using galaxy_live as default value for "HS_FDS_DEFAULT_OWNER"
HOSGIP for "HS_SQL_HANDLE_STMT_REUSE" returned "FALSE"
##>Connect Parameters (len=42)<##
## DSN=GALAXY;
#! UID=galaxy_live;
#! PWD=*
hgocont, line 1890: calling SqlDriverConnect got sqlstate IM002
when I try to test the database link, I get this error:
ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
[Microsoft][ODBC Drive Manager] Data source name not found and no default driver specified
ORA-02063: preceding 2 lines from GALAXY
28500.00000- "connection from ORACLE to ad non-Oracle system returned this message:"
*Cause: The cause is explained in the forwarded message.
*Action: See the non-Oracle system's documentation of the forwarded message.
vendor code 28500
Edited by: user7336435 on 27-Apr-2009 05:56

11.2 is beta at the moment. There is no official release date so far.
As DG4ODBC is independant from the Oracle database (or the target database) you can use a 3 machine model:
On the first machine you have your Oracle database, on a second machine running 32bit Windows you can install DG4ODBC and on the 3rd machine you can run your foreign database.
If the SQL Server 2k is installed on a 32bit Windows machine, then you can also install DG4ODBC on this machine.
In general the connection from an Oracle database to the DG4ODBC machine is done using SDQL*Net. The listener responsible for DG4ODBC will then load the DG4ODBC executable which will connect to the SQL Server using SQL Server ODBC driver.

Trying to install a setup on a 64 bit machine with Windows server 2012 R2 which writes to registry FAILES

My msi is a 32 bit setup.
When I install it on a 32 bit machine with Windows XP it works fine .
I tried to install it on a 64 bit machine with windows server 2008 and it succeeds
While running my setup on a 64 bit machine with Windows server 2012 R2 it failes and I get the folloawing message:
"Registry object reference not set to an instance of an object"
Then the setup exits and leaves the app partially installed
I tried searching for known problems over the net, but found nothing
I will be happy to get some advice
Thanks
Liora

Sounds like you are trying to update a registry object that is not there.
Is this your own msi, or is it from a third party application? If third party, check with them to see if they support it on 2012 or if they have a known workaround.
If it is your own msi, sounds like it is time to debug it.
.:|:.:|:. tim

Install Oracle 10.2.0.1 (32 bit) on Windows Server 2012 (64 bit)

Hello
Can I install Migrate my database 10.2.0.1 (32 bit) to Windows Server 2012 (64 bit).
I would like to install Oracle 10.2 server (32 bit ) on Windows Server 2012 (64 bit).
Thanks

It is not a supported combination (see the Certification tab in MOS) - so things may or may not work as advertised. Is there a reason to continue to use a desupported version of the database ?
HTH
Srini

Unable to install Client Tools for Sybase ASE 15.7 on Windows Server 2012 64-Bit

Hello Folks,
I just downloaded the client tools package from https://support.sap.com/swdc --> Installation and Upgrades --> A-Z list --> SAP ADAPTIVE SERVER ENTERPRISE --> SYBASE ASE 15.7 --> Installation --> Microsoft Windows --> 51044415.zip
I'm trying to install the client tools for a newly provisioned Windows 2012 64-Bit machine. After unzipping the folder and running autorun, the installation does not proceed. When I go to pcclient64 and run either setup.exe or setupConsole.exe, I get the error "This Application has Unexpectedly Quit, Invocation of this Java Application has caused an InvocationTargetException. This application will now exit. (LAX)". I stumbled across various posts on the forum, and it appears that the installer is not certified for Windows Server 2012. I tried using the compatibility mode for Windows 7, and it proceeds further and launches the SAP GUI; however, it closes afterwards.
Any suggestions would be greatly appreciated. Thanks in advance.

Hi,
51044415 is a PC-Client 15.7 refresh.
You are using a version that was not certified with Windows 2012. Get the most current version PC-Client 15.7 SP130 or SDK 15.7 SP130 or SP132.
If your looking for PC-Client5.7 SP130 look for EBF23439
We didn't get certified with Windows 2012 until SDK 15.7 ESD#6 even with that I reported a few minor issues.
You need the following on the machine before the installation.
Microsoft Visual C++ 2010 Redistributable Package (x64)
Microsoft Visual C++ 2005 Redistributable Package (x86) (or dsedit and ocscfg will not work)
Microsoft Visual C++ 2005 Redistributable Package (x64) (or dsedit and ocscfg will not work)
Thanks,
Dawn Kim

HP Deskjet 1280 Printer intallation in 64 bit Windows Server 2012

Similar Messages

Maybe you are looking for