HP Deskjet 1515 Stops Printing Mid Way

I have a HP Deskjet Ink Advantage 1515.  Whenever I try to print a certain pdf(It's a whole colored page) it stops printing it midway. I have tried converting it to a .doc, that doesn't seem to fix the issue as well. I tried printing other non- intensive colored pictures but it seems to print it just fine; I just have problems printing with that one pdf. I've tried using HP Print and Scan Doctor and reinstalling the drivers but it still doesn't fix the problem.
I honestly don't believe that this printer cannot print such kinds of documents so any suggestions will be a great help!

Hi @lloydk26 
nd welcome to the HP Forums, I hope you enjoy your experience!
I see you're running into print issues. I would love to try and help you, but I do need a little information first. I am linking a few HP Support documents below that will show you how to find which operating system you are using. Also, if you're using Windows, please include whether your operating system is 32-bit or 64-bit. With this information we can provide you with accurate information.
Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
Which Windows operating system am I running?
Is the Windows Version on My Computer 32-bit or 64-bit?
I would recommend renaming and resaving the PDF file, in case of any corruptions.
I would also recommend a power reset on the printer.  Disconnect the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug the printer back in. Ensure you plug the printer directly to a wall outlet. Make sure to bypass any sort of surge protector or power bar.
Another suggestion I would make would be updating Adobe:
Adobe Product updates
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Similar Messages

  • Deskjet 1515 doesnt print bottom part of a page

    hello ahm would someone help me cause i dont know how to fix it. my  newly-bought deskjet 1515 all-in-one series doesnt print the bottom part of any page. for example i insert a border line and then when i press ctrl-p the print layout showed that the bottom border was not there despite the margins are correct.
    This question was solved.
    View Solution.

    Hello Aldwin06, and welcome to the HP Forums, I hope you enjoy your experience!
    I see you are experiencing issues with your printouts.  I would love to try and help you, but I do need a little information first. I am linking a few HP Support documents below that will show you how to find which operating system you are using. Also, if you're using Windows, please include whether your operating system is 32-bit or 64-bit. With this information we can provide you with accurate information.
    Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
    Which Windows operating system am I running?
    Is the Windows Version on My Computer 32-bit or 64-bit?
    Also, does this issue occur when printing from multiple programs?
    Please let me know what you find.  Thanks for posting on the HP Forums!
    Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
    Jamieson
    I work on behalf of HP
    "Remember, I'm pulling for you, we're all in this together!" - Red Green.

  • Javascript causing some pages to stop loading mid-way in Safari 3.04

    I am having problems with Safari 3.04 which stops loading some pages mid -way when I have javascript enabled. I am running 10.4.11 tiger. I tried resetting safari and empty cache. I also ran Oxyx and cleared cache with it.
    Is javascript a separate program that I could reload> Do I need to reload Safari? If so, how do I do that?

    It would seem that Apple has messed up the javascript implementation in 10.4.11/3.0.4. I think it is more a 3.0.4 issue as there are a number of folks reporting crashes using 3.0.4 on leopard. Looks like us poor schmucks who are either to cheap or are not brave enough to be early adopters actually win. While the prize in this case is less than stellar is still beats a hard crash....
    <rant>
    One would like to think that apple has enough common sense to post a thread indicating that
    1) they acknowledge the problem.
    2) they are working on it.
    As it is they seem to be behaving more and more like microsnot with every patch they release. I guess if you don't have an iPod or iTV or god forbid an iPhone your $3K investment just doesn't count as much.
    </rant>

  • FireFox 3.6.13 Locks up Microsoft XPS Document Writer, PDF995 (created Acrobat pdf file output) stops printing mid document, and Internet Explorer works fine

    Microsoft XPS Document Writer locks up and PDF995.com (creates acrabat pdf file) stops printing after the second page from this site http://super.nova.org/DPR/CinematicApproach/. This was a Windows 7, 64 bit machine that had the issue. Microsoft Internet explorer works fine and printed the document with Internet Explorer.
    The machine that displayed FireFox printing issues was a up to date Win 7, 64 bit, Quad Core, 8 Gig Ram. Don't really have a question just reporting a FireFox Bug.

    Hi,
    do you have a solution for the problem? We have actually a similar problem with locked IE8 when using a zoom factor > 100% (it's a customer WD4A).
    Regards,
    Steffen Brauner
    Edited by: Steffen Brauner on Jul 7, 2011 6:54 AM
    I found the notes 1534606+1534610 that solved my prob.
    Edited by: Steffen Brauner on Jul 7, 2011 6:55 AM

  • HT4623 why has my iphone 5 stopped working mid way through the update?

    can anybody help me? brand new iphone 5. updated it but mid way through screen went black and now not turning on. apple are not helping me...

    do a reset. hold down the home/sleep button together until you see the apple logo and then release, then wait for the phone to boot back up.
    if that doesn't help look the link http://support.apple.com/kb/HT1808

  • HP Deskjet 1000 stopped printing

    Running Slackware 13.37, on 1686 with Athlon AMD XP2200+ under cups 1.4.6-i486 and HPLIP 3.113a on kernel 2.6.3.7.6-smp.
    Was printing fine when ink ran out, installed new black and ran hp-levels showing 80% color 100% black.  Tried to print from Firefox 4.0 and from command line both cases I get "Device Communications Error 5012.  Strange it would stop under this situation.  Is there a reset?  User and root both members of scanner and lp groups.  Now user attempts to run hp-levels yields:Unable to communicate with device (code=12):...  lsusb shows: Bus 001 Device 003: ID 03f0:8811 Hewlett-Packard
    Any thoughts or suggestions welcome

    @pz1,
    Welcome to the forums!
    I understand your print jobs are printing out with partial printing on them, and I hope to help!
    I am curious to know if the issue could be within the printer hardware itself, and would like you to print out a diagnostic test page to find out.
    Please click this link, follow all of the steps and let me know the results:
    Fixing Print Quality Problems for the HP Deskjet 1000 (J110), 2000 (J210), 3000 (J310), and HP Deskj...
    If you wish to send me a "thank you" for my response to help, click the thumbs up  below!
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • Deskjet 5440 stopped printing wirelessly from my MacBook Pro after upgrading to OS 10.8

    My home printer is connected by cable to a desktop Mac (Power Mac G5).  I have always printed wirelessly to it from my MacBook Pro laptop through our home wireless network.  However, just recently I upgraded the operating system on my laptop to 10.8.2.  At the same time, I upgraded the HP driver software (from HP) that is supposed to allow the 5440 to work with the new OS.  Since then, I can print from my laptop if it is connected by cable to the printer, but not wirelessly.  When I attempt to print wirelessly, get a message that says the printer is not connected.

    So you are using Printer Sharing on the PowerMac?  If so, on the PowerMac, go to System Preferences > Print & Fax and delete the printer with the '-' sign at the bottom of the printer list.  Re-add it with the '+' sign.
    Make sure that Printer Sharing is checked and that in System Preferences > Sharing that Printer Sharing is also checked there.
    Now, on the MacBook Pro, go to System Preferences > Print & Scan and click the '+' sign to add the printer.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • DVD stops playing mid-way

    I'm stumped. I'm trying to troublehoot a problem a co-worder is having where they authored a 17 min. DVD that that simply stops playing suddenly in a standalone DVD player right at the 5 minute mark. Captured and edited DV video in FCP. There were initially some offline clips and unrendered clips when I looked at it, but I deleted or rendered all those. No go. I even tried exporting the whole sequence as a QT, re-imported, re-encoded and burned and it still stops right at 5:00. Strange. Plays fine in the DVD SP simulator, but the burned disc won't play on the Mac or in a player. We're using our usual reliable Verbatim media. Any ideas?
    Thanks,
    Doug

    Thanks for the replies, but I don't think its any of those usual suspects. Total length is 17 minutes or something like that. 7.0 CBR MPEG-2 with 224 kbps Dolby 2.0. No labels. We're thinking there's something wrong with the drive because apparently he's had similar trouble with other projects recently. But I wanted to make sure there wasn't something simple in the software we're missing.
    Doug

  • Pixma MG5420 stops printing midway through picture

    Printing out a handful of 4"X6" borderless postcards. It will print several at a time, or maybe not even finish one, and just stop. No message on the display. The only thing I see in the console on the Mac is "Canon_MG5400_series: File "/Library/Caches/com.apple.ipp2ppd.Canon MG5400 series.icns" not available: No such file or directory", which I think is an ignorable error. 
    What causes a printer to just stop printing mid-page and think it's done? Ink levels look good, paper feed looks good...
    Thanks!

    Hi stubbleskark!
    In order to provide you with the proper steps, please let everyone know what version OS (Mac OS 10.x, etc)  you are running on your machine. That way, the community will be able to assist you with a workflow appropriate for your computer.
    Thanks!

  • TS1424 songs cut off mid-way through??

    i downloaded an album and some of the songs stop playing mid-way through while others are fine. has anyone seen this before and is there a fix for it?

    If your country's iTunes Store allows you to redownload purchased tracks, I'd delete your current copies of the dodgy tracks and try redownloading fresh copies. For instructions, see the following document:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    Otherwise, I'd report the problem to the iTunes Store.
    Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
    Find the items that are not playing properly. If you can't see "Report a Problem" next to the items, click the "Report a problem" button. Now click the "Report a Problem" links next to the items.

  • K8600 stops printing

    hello, i have a k8600 and it stops printing mid-page or does not print at all. 
    i have tried...
    turning it off, unplugging it, disconnecting from network
    when i turned it off and unplugged it, then hooked it back up it would print a page or two then revert to its abnormal behavior
    i have uninstalled/reinstall from my PC, uninstalled/reinstalled (and completely delete) drivers
    this just started happening, no changes in system, and is happening to all the @15 people who (try to) use it
    any help would be most appreciated

    Hi - A couple of things to check:
    - First, verify that the K8600 is the default printer driver or the selected printer in whatever program you're printing from (probably is, but wanted to double check).
    - Second, in many cases this is a communication related issue (even if it is intermittent).  Try disconnecting and reconnecting the USB cable from both the printer and computer.  If that doesn't resolve it, I'd try another USB cable.
    Hope that helps.
    Say Thanks by clicking the Kudos thumbs up. Please mark the post that solves your problem as an Accepted Solution so other forum users can utilize the solution.
    I am an HP employee.

  • Lightroom 4.2 stopped mid way through tethering with Canon 1DX.  any suggestions?

    Lightroom 4.2 stopped mid way through tethering with Canon 1DX.  Top left corner bar read still transferring, but all images had already been viewed in preview of tether and i had given it an etxra 15 minutes to contine transferring until I rebooted everything.  I restarted several times while client waited, but LR would no longer accept tethered images any longer.  Any suggestions?

    Well, the EOS Utility was incompatable with OSX for quite awhile and once LR appeared to support tethering, I migrated away from it. Until yesterday.
    The workflow is still wonky, if you want to use LR for display/printing (which I do), but it's doable.
    There are tutorials online, I remember finding them (sorry no links) years ago.
    The main bugaboo is creating the appropriate folders in the right order. Both LR and EOS Utility are really picky about those folders (have to be empty, both apps picky about that, so you'll probably have to manually empty after firing off a couple of test images).
    I always forget how I did it, but last night's kind of fresh in my mind — I think the order that worked for me was:
    create a destination folder in EOS Utility
    in LR's auto-import settings, choose the step #1 folder as the watched folder (you've got to do this before putting a single thing in that folder, which will likely mean manually tossing some test images, because if you don't LR will ***** at you that the folder must be empty.)
    below that in the same window, create a Destination folder. (don't know why this is necessary, but it is)
    Finally, I suggest doing all this in one parent folder and creating a shortcut to that folder somewhere very convenient so that you want drive yourself crazy in the inevitable opening, closing and reopening of these folders, trying to troubleshoot. :-)

  • Central 5.4 stops printing, a reboot of the server is the only way to fix the problem

    Hi, We are running central 5.4 on windows 2000 SP4, this has worked for ages but has just started with an intermittent fault.  When we send some output it suddenly stops printing, and no forms sent to central will be printed, the only way to get them to print is to reboot the server, stopping and starting central has no effect.<br />there seems to be no errors (event viewer etc)apart from below<br /><br />errors in log file<br />2005/05/11 11:20:43 D:\jfsrvr\jfserver.exe: [308]Sleeping for 5 seconds.<br />2005/05/11 11:20:48 D:\jfsrvr\jfserver.exe: [305]Scanning for data files, directory 'D:\jfsrvr\Control\'.<br />2005/05/11 11:20:49 D:\jfsrvr\jfserver.exe: [305]Scanning for data files, directory 'D:\jfsrvr\Data\'.<br />2005/05/11 11:20:49 D:\jfsrvr\jfserver.exe: [306]Processing file 's43719.dat', '^job miteksopr'.<br />2005/05/11 11:20:49 D:\jfsrvr\jfserver.exe: [307]Launching task '"D:\jfsrvr\jfmerge" MITEKSOPR.mdf D:\jfsrvr\Data\s43719.dat -l -apr -allD:\jfsrvr\jfserver.log -asl1 -amq0 -amsD:\jfsrvr\Mst\Despatch.mst -m1T -z"HP2280" -axfon  -aiiD:\jfsrvr\jfmerge.ini'.<br />2005/05/11 11:20:49 D:\jfsrvr\jfmerge: [125]* Processing data file: 'D:\jfsrvr\Data\s43719.dat'.<br />2005/05/11 11:20:49 D:\jfsrvr\jfmerge: [289]MDF file `d:\jfsrvr\forms\MITEKSOPR.mdf' opened.<br />2005/05/11 11:20:49 D:\jfsrvr\jfmerge: [400](6) The handle is invalid.<br /><br />2005/05/11 11:20:49 D:\jfsrvr\jfmerge: [3016]Error, unable to obtain document properties.<br />2005/05/11 11:20:49 D:\jfsrvr\jfmerge: [3008]Error, unable to get info about device 'HP2280' attached to port '<nil>'.<br />2005/05/11 11:20:49 D:\jfsrvr\jfmerge: [400](183) Cannot create a file when that file already exists.<br /><br />2005/05/11 11:20:49 D:\jfsrvr\jfmerge: [2]Error opening output device/file 'HP2280'.<br />2005/05/11 11:20:49 D:\jfsrvr\jfmerge: [400](6) The handle is invalid.<br /><br />2005/05/11 11:20:49 D:\jfsrvr\jfmerge: [3018]Error ending page on printer.<br />2005/05/11 11:20:49 D:\jfsrvr\jfmerge: [210]Nothing was printed.<br />2005/05/11 11:20:49 D:\jfsrvr\jfserver.exe: [314]Agent exit message: [3018]Error ending page on printer.<br />2005/05/11 11:20:49 D:\jfsrvr\jfserver.exe: [312]Warning: skipping disabled task JfError.<br />2005/05/11 11:20:49 D:\jfsrvr\jfserver.exe: [308]Sleeping for 5 seconds.<br />2005/05/11 11:20:54 D:\jfsrvr\jfserver.exe: [305]Scanning for data files, directory 'D:\jfsrvr\Control\'.<br />2005/05/11 11:20:54 D:\jfsrvr\jfserver.exe: [305]Scanning for data files, directory 'D:\jfsrvr\Data\'.<br />2005/05/11 11:20:54 D:\jfsrvr\jfserver.exe: [308]Sleeping for 5 seconds.

    2005/05/11 11:20:49 D:\jfsrvr\jfmerge: [125]* Processing data file: 'D:\jfsrvr\Data\s43719.dat'.
    2005/05/11 11:20:49 D:\jfsrvr\jfmerge: [289]MDF file `d:\jfsrvr\forms\MITEKSOPR.mdf' opened.
    2005/05/11 11:20:49 D:\jfsrvr\jfmerge: [400](6) The handle is invalid

  • I cannot get my HP Deskjet 2540 to stop printing, it's off color cartriges are new.

    My HP Deskjet 2540 won't stop printing and even when it prints the color is off, the ink is new, what doI do to fix this?

    Hi boogies,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    Sorry to hear that you are having printing issues as well as an issue with the color ink cartridge. In order to better assist you, Please respond with which Operating System you are running:
    Which Windows Operating System am I running?
    Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
    I am always happy to help.
    Thank you.
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • HP officejet 100 Mobile Printer Stops in Mid Print

    This printer worked fine (NO problems with Bluetooth even) for the first couple of months and several changes in print cartridges. For the last year, every time I print a document, it will either stop printing on the second or third document or stop in the middle of the first document, and all the indicator lights come on telling me I need to clean cartridges, etc. Every time is different. Some times it is one indicator error light, the next print job may trigger all the lights. Every print job I execute and it fails, I have to remove the battery, re-insert the battery and print again. It works every time after I reprint the job after removing the battery. The next document triggers errors again and it will not print. I do not have a warranty, but I am ready to throw it in the garbage! What can I do? I am running on a Mac Osx system. Please help. Thank you!

    Hello there! Welcome to the forums @IdahoElk 
    I read your post about the printer issues you're having with your Officejet 100 Mobile printer. I have a couple of suggestions that may help you.
    First of all, power reset the printer and ensure the printer is plugged in directly to the wall outlet, avoiding power bars and surge protectors. This ensures the printer is receiving full power and may help greatly.
    Press the Power button to turn on the product.
    With the product turned on, disconnect the power cord from the rear of the product.
    Unplug the power cord from the wall outlet.
    Wait at least 30 seconds.
    Plug the power cord back into the wall outlet.
    Reconnect the power cord to the rear of the product.
    If the product does not turn on by itself, press the Power button to turn it on.
    Also, check out this troubleshooting document. Check the issues to see if you can find the description to what you are seeing on your printer.
    Blinking Lights on the HP 100 Officejet Mobile Printers
    If the troubleshooting does not help at all, I would lastly suggest technical support.
    Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
    Happy Monday
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Maybe you are looking for