HP Deskjet 2060 Won't communicate with HP Pavilion Touchsmart 14-B132tx laptop

PLEASE HELP. My HP DESKJET 2060 All-In-One printer won't communicate with my HP Pavilion Touchsmart 14-b132tx. I've been printing before smoothly and it just suddenly stopped a week ago. I already bought a new printer cord and even the new one won't allow my printer to communicate with my laptop.
I am using Windows 8-64 bit. I've already downloaded the latest HP Print and Scan Doctor and even uninstalled and re-installed the HP Deskject Ink Advantage driver but my printer still doesn't work with or communicate with my laptop.
Please help me anyone? Out there?

It would appear that the printer USB port is damaged. It would be best to contact HP Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here.
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Similar Messages

  • My iPad won't sync with apple tv home sharing my laptop appears in computers section but even though I have turned home sharing on my iPad and used same apple Id

    My iPad won't sync with apple tv home sharing my laptop appears in computers section but even though I have turned home sharing on my iPad and used same apple Id.can anybody help plz

    you have to go to your atv's settings and remove the sync setup with the in the atvs eyes "old" computer
    before you can add the "new" computer as a sync computer
    an atv can only be set to sync with 1 and it don't know the "old" computer is not just off

  • Help! I've recently updated itunes & ipod but now it won't sync with my ipod even though the laptop recognises it and charges. I've reinstalled itunes and factory reset ipod, still nothing. How can I fix?

    Help! I've recently updated itunes & ipod but now it won't sync with my ipod even though the laptop recognises it and charges. I've reinstalled itunes and factory reset ipod, still nothing. How can I fix?

    iOS: Device not recognized in iTunes for Mac OS X
    Also see:
    If you connect the iPod to another computer does iTunes not see it?
    What version of iTunes is installed?
    Whast model iPod and iPhone and what iOS version?
    Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities
    For the enugh space, you are trying to sync too much media to the iPhone

  • Printer deskjet f4200 will not communicate with computers

    OK so I am at a loss I know the communication is the issue.  I used this without problem from install till I had to have the computer crashed. Any help ? I have tried installing twice and the doc numerous times.

    Hi @cmac22,
    Welcome to the HP Forums!
    I understand that your HP Deskjet f4200 printer will not communicate with your computers running Windows Vista. I am happy to look into this for you!
    Please, take a look through this guide, 'Printer is offline' Message Displays on the Computer and the Printer Will Not Print: Windows Vista.
    Hope this guide helps!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • My 2009 mac pro won't communicate with the connected monitor

    my mac pro desktop was bought roughly in 2009.its running the latest os that this model can run with tiger.the problem used to be intermittent,now it is very hard to get this thing to communicate with the external monitor.the led on the mac shows that its on but it won't chime as it starts up.whenever it did cut on,it would stay on for a moment then a dark tint would scroll over the screen desktop from top to bottom and everything freezes.i then have to turn off the computer from the button.A side note:This computer never functioned properly from day one when i was using it to run my protools music recording DAW.i could barely complete songs as it would run out of cpu and processing power.the computer has 14 gigs of ram,and quad core processing.i took it to apple store for tech support but they found nothing.now i am solely trying to run my serato dj software with it.based on these symptoms,what is wrong with my computer? is it software problem or is it a bad graphics card,bad cpu,is there any parts i can buy to inexpensively overhaul this computer?

    it won't chime as it starts up.
    Then it has a Hardware problem. Macs run a Power-On Self Test, and the chime is generated in software when the first part of the test has passed, and if a suitable source of software can be found, booting is likely.
    Is the power light flashing in a pattern? That indicates "not enough working RAM to start up."

  • HP DeskJet F380 won't work with Airport Express

    Hello,
    I just purchased a HP DeskJet F380 AIO printer to use with my PBook G4 12". It works fine when connected directly to the PBook through USB, but when I try to use it with Airport Express it won't work. The printer setup utility recognizes the printer as a Bonjour printer but then the specific model won't show up in the pull-down menu. I've tried picking other HP printer models, but when I try to print the printer won't do anything at all. I asked HP support and they basically threw up their hands and gave no assistance.
    How can I make this printer work with Airport?
    Thanks!
    PowerBook G4 12"   Mac OS X (10.4.7)  

    Hi and welcome to the Discussions
    Try the process outlined here:
    HP Printers (and others) not on compatibility list and Airport Extreme Printing
    http://www.ifelix.co.uk/tech/1300.html
    If the supplied HP driver won't work (and as there are no third party alternatives available) then no it won't work with Airport.
    iFelix

  • Computer Won't Communicate with Wireless HP C6380 All-In -One

    I own a HP C6380 All-In-One which I use with a desktop and laptops running Windows 7 and a netgear router.
    Everything has been working fine until the other day when the unit just stopped printing jobs.  Print jobs in the que just time out.  There are no print errors indicated.
    I re-did the network setup for the printer and it recognizes and connects to the router but the troubleshooting diagnostic says that the computer can't communicate with the printer.
    What am I missing??  Any help would be greatly appreciated.

    Download and run this utility: Download and run this utility: http://h20180.www2.hp.com/apps/Nav?h_pagetype=s-926&h_lang=en&h_client=s-h-e17-1&h_keyword=dg-NDU&ju...
    What does it say?
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • MacBook Pro won't communicate with wireless HP6500 printer

    My MacBook Pro late  2011 will not communicate with my HP6500 Officejet all-in-one. I have tried everything imaginable to fix the problem. My iPad mini works wonderfully with the same printer.

    Hi there sailor ricky,
    You may find the troubleshooting steps in the article below helpful.
    Troubleshooting printer issues in OS X
    http://support.apple.com/kb/TS3147
    -Griff W. 

  • Dell Dimension desktop sometimes won't communicate with my HP Photosmart 6510 wireless printer

    At random times, when trying to print from Dell Dimension desktop to HP Photosmart 6510 wireless printer, I get a message that the computer can't communicate with the printer.  The printer shows that it is connected to the Internet. I haven't changed any settings.   Each time this happens, I unplug the printer and router, but it doesn't fix the problem.  After about 20 minutes or so, it prints normally.  It always happens at the most inopportune times.  Any suggestions about how I can keep this from recurring?

    These settings are for setting up your wireless printer to stay connected to your router, keeps wireless devices better connected and makes your router secure and hack proof.
    1. Set a static IP in the printer (see step 6) outside the DHCP range of the router (check your manual). 
    2. Verify in the printer that 'Auto Off' is disabled.  Use the Embedded Web Server (EWS) by going to the  
        printers IP address in your browsers address bar, click  Settings Tab/Auto Off.  Or use the Printer
        Assistant, Printer Home Page (EWS). 
    In the router:  (Refer to your router manual for information)
    3. Use a fixed wireless channel like 1,6 or 11, never 'auto', try channel 1 first then the rest. 
    4. Set router to 20Mhz only, or 145Mbps depending on router. 
    5. Always use WPA2-AES (Personal) encryption, but you can try ‘mixed’ mode. 
    6. Disable WPS and never use it and disable UPnP for the routers security.  Nobody can hack your
        system now and helps with wireless connectivity (if you want to know why, search the web). 
    7. If you have a dual band router (2.4Ghz and 5.0Ghz bands), make sure the SSID’s are NOT the same,
        they must be different for all bands, even for any Guest networks. 
    8. Save all settings.  Power off both, wait 5 mins.  Power on router wait 3 mins. 
    9. Power on printer and verify it reconnects to router. 
    Windows 7/8/8.1   Is Network Discovery on or off?
    Control Panel\Network and Internet\Network and Sharing Center\Advanced sharing settings.
    Under Home or Work (current profile) \ Network Discovery.
    Select "Turn on network discovery" and save changes.
    Say thanks by clicking the Kudos Thumbs Up to the right in the post.
    If my post resolved your problem, please mark it as an Accepted Solution ...
    I worked for HP but now I'm retired!

  • HT3887 My iMac won't communicate with my mouse.  It keeps saying "wireless connection undiscoverable".  This is the first time I have set up my equipment after having a Data Transfer session yesterday. It's a brand new computer.  How can I fix this?

    How do I get my iMac to communicate with my mouse.  It keeps saying "wireless connection not discoverable". Thanks

    Hey Jeanette
    If you have a USB mouse handy, you can plug it in and use it to navigate to the Bluetooth settings in System Preferences to get the mouse to pair again. There are also troubleshooting steps in the article below for getting the mouse to pair as well.
    Troubleshooting wireless mouse and keyboard issues
    http://support.apple.com/kb/TS3048
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

  • Built in iSight won't communicate with iMovie

    I can't get iMovie to communicate with the built in iSight camera on my Mac Book Pro. The only option showing when clicking on the camera icon is time lapse. Any suggestions?
    How do you capture video through QuickTime Pro?

    ... iMovie ... with the built in iSight camera on my Mac Book Pro ... Any suggestions?
    Using iSight with iMovie
    How do you capture video through QuickTime Pro?
    QuickTime Player 7.0 Help: Recording Audio and VIdeo

  • Photosmart C4795 Wireless. Won't communicate with Mac Computer unless its through Ethernet cable

    Hello,
    I recently just purchased a new router (MediaLink) and had to change the name of my wifi account. Before, my printer was communicating and working perfectly with my Macbook Pro (10.6.8). Since I installed the new router, my printer is not being recognized by the computer. It states it is "not connected."
    My first step:
    I used HP Setup Assistant to reinstall my printer and configure it to the new wifi name.
    It went through and connected to the internet, HOWEVER, when I got to the IP page, with the printer connected via USB, it said that "Device is not connected" and mentioned that my COMPUTER was not communicating with the wifi (even though I had full bars and was on the internet at the time).
    Then I unplugged the printer and plugged in the ETHERNET Cable directly from the router and the printer was immediately recognized. I was in the other room and printing. But when I unplugged the ethernet cable, the printer disapeared! and went back to its original state! "Not connected/found"
    My second step:
    I proceeded to search MANY online forums AND call HP (they were no help since my warrenty is out) and did a few different steps:
    Uninstalled and reinstalled HP setup and software
    Downloaded softwere compatable with Mac Os 10.6.8
    Unplugged printer, computer, and router and then replugged it in
    Reset printer
    Reset printer to factory settings
    Reset printing system on my computer via system preferences
    Tried manually adding printer via IP address
    Adding printer normally from system pref. (the printer was not found UNLESS I was plugged into the Ethernet cable)
    AND I HAVE HAD NO LUCK AT ALL!!! Before the new router, the printer has been fine! and was so easy!! What is happening and what can I do to fix it? Im considering purchasing a new printer Im so frustrated.
    Please help!
    Thank you.

    You don't need a new printer, you need a new router - one that supports Bonjour, which your Mac needs to communicate with your printer.
    Is this router supplied by your ISP?  Did you contact them about it?  If you bought the router yourself, I recommend returning it and getting a standard router like Netgear or Linksys.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • Imac 10.8.3 won't communicate with laserjet P2055dn

    iMAC OS 10.8.3 wont communicate with Laser Jet P2005dn throught USB

    If it is HP, it appears it isn't supported:
    HP LaserJet and Color LaserJet Printers, MFPs, and All-in-Ones - Products not supported or with limited support in OS X 10.8 (Mountain Lion)
    You might be able to get it to work using these drivers:
    HPIJS for Mac OS X
    Gimp - Print

  • CanoScan 4400F won't communicate with Toolbox 5.0

    After two external disk crashes, I have apparently mostly recovered from loss of some files and programs.  One lingering problem is still no communication established between CanoScan 4400F scanner and CanoScan Toolbox 5.0.  I have checked connections repeatedly and successfully downloaded new scanner driver and new Toolbox program, after first deleting the existing version.
    The error message when starting up Toolbox is "Cannot communicate with scanner.  Cable may be disconnected or scanner may be turned off.  Check status.  Scanner driver will be closed.  1.0.0."   The scanner does not have an on/off switch.
    I'm badly in need of some guidance on what to do next.

    Unless you removed it, Pages ’09 v4.3 was automatically moved into /Applications/iWork '09 folder during the Pages v5 installation process.
    You can continue to use the older Pages with Antidote, but must be careful to not double-click documents to open them, because Pages v5 will intervene. Pages v5+ will irreparably damage earlier Pages documents, as the new document architecture is entirely incompatible.

  • Camera won't communicate with FCP or Imovie

    I apologise if this has been asked a million times before, but I'm on a very tight time crunch, and I think each case is different.
    I'm making a montage/video to be shown at a friend's wedding on thursday, and I can't get the freakin camera to communicate with FCP!
    I also tried Imovie, and the only thing it recognizes is the built in Isight camera.
    I'm running:
    OSX 10.4.9
    FCP 5.1.9
    QuickT 7.1.5
    and the camera's a small sony consumer cam (DCR0PC101E PAL)
    I've got all my settings right, i've done this before a million times, but for some reason, something is off today.
    I haven't used this particular camera on this computer before, I used to use it on my old powerbook (i don't know if it matters, but I'm wondering if this is an intel issue)
    Is there a way to check if the computer itself can read my camera... Like if I go to system profiler, should I look under firewire and find the name of my camera or?
    Any help you can send my way is deeply appreciated.

    From time to time similiar questions pop up here. But, most indicate everything works just fine in iMovie but not FCP. Since iMovie also does not recognize the camcorder, you might have any number of problems.
    Do you have access to another camcorder? If another camcorder works just fine with FCP or iMovie, that would narrow your troubleshooting to the DCR0PC101E.
    If another camcorder doesn't work, it could be the firewire cable. I'm guessing the cable to the external drive is a 6/6 and the camera cable is a 4/6, so you might also need to try a different cable.

Maybe you are looking for