Hp deskjet 2514 driver install issue

My deskjet 2514 driver will not install properly from the website or cd provided and this is very upsetting. I can't not use the printer from my laptop running window 7 at this point in time. I have runned the install wizard and troubleshooter and still can't get the driver installed and I have had no issues with a different hp deskjet1000c on my desktop running WinXP. I need to know as to why the driver is not installing at all. I saved the driver onto another cd (blank) to try it and still fails to install. How can this happen when the printer is brand new from the store and is useless.

I have the same exact problem. I get driver 82801EB 24D2 during the initial install, then I went to troubleshoot and it says it found the problem and to install again and each time it gets the same driver issue but a different ending suffix. it goes from 24D2 to 24D7 and 24Dx.

Similar Messages

  • E5510 driver install issues with 6300 wifi and Bluetooth

    I hope someone can help. I have an E5510 that the hard disk crashed on. When I reload the windows 7 disk and install all of the drivers I seem to have a conflict between the 6300 wifi driver and the bluetooth drivers. Everything looks good until I do the windows updates. Then the bluetooth goes away and I have a bunch of wifi driver errors in the device manager. you cant uninstall them.  Anyone have any ideas?

    Hi bwing777,
    Thanks for the post! It sounds like the Windows update could have a ‘Microsoft recommended’ Bluetooth driver update included. I would suggest running a system restore or uninstalling the Bluetooth device, then double checking the device drivers being installed by Microsoft Update and preventing them from updating automatically.
    For the recommended Dell drivers, and the order we suggest these drivers be installed, check out the guide below.
    Latitude E5510: Windows 7 Driver Install Order
    http://www.dell.com/support/article/us/en/19/SLN286334/EN
    Thanks,

  • Catalyst driver install issue

    Hey!
    I have an ATI Mobility radeon HD 5650 and i needed to run openCL on it, so i wanted to install catalyst-utils and the opencl-catalyst, however, i first installed the xf86-video-ati driver, so i tried installed using
    pacman -S catalyst-utils
    And i got the following output:
    [root@guimtr-arch ~]# pacman -S catalyst-utils
    resolving dependencies...
    looking for inter-conflicts...
    :: catalyst-utils and mesa-libgl are in conflict. Remove mesa-libgl? [y/N] y
    :: catalyst-utils and xorg-server are in conflict. Remove xorg-server? [y/N] y
    error: failed to prepare transaction (could not satisfy dependencies)
    :: catalyst-utils: requires xorg-server
    :: ati-dri: requires mesa-libgl=9.1.1
    :: gdm: requires xorg-server
    :: glamor-egl: requires mesa-libgl
    :: intel-dri: requires mesa-libgl=9.1.1
    :: nouveau-dri: requires mesa-libgl=9.1.1
    So the problem is that catalyst-utils conflicts with xorg-server, but then if say yes i want to remove, it says it needs it for catalyst-utils
    Thanks in advance
    Last edited by guilhermemtr (2013-04-04 22:12:40)

    Somone will post when they have something to say. Do not bump your threads in a hour. Remember that the forum does not wait for YOU to ask questionsw but YOU need to wait for the forum to answer.
    Read the forum rules with regards to bumping threads ::  https://wiki.archlinux.org/index.php/Fo … te#Bumping
    As for your issue, have you even taken the effort to search? there are 3 solved threads on the boards.
    Closing...

  • SB Live 5.1 Plat/XP SP2 driver/install issues..

    I'm about to pull my hair out, maybe someone here can help me.....thanks in advance.
    My SB Li've 5. Platinum card and drivers/programs had been working fine for years. Shortly after the SP2 install, I started getting corrupted driver messages upon startup (unable to identify which), until finally startup failed altogether. Thinking that my hard-dri've was failing too (bad sectors), I decided to upgrade and do a complete re-install of win98se, XP and all my programs. The re-install has been going great (albeit slow), until I got to the install of my SB card and programs. Here's the issues I've been having since:
    -The Auto-Updater said I had the latest software & drivers before I installed anything from Creative
    -The SB Li've original CD says it's not compatible with my OS (XP Home update version/SP2 updated). I tried to download the programs, but it said I needed previous versions when trying to install. (Later, I installed the CD anyway per a previous topic I saw on this board.....startup was ok.)
    -Then I installed the Li'veDrvUni-pack found on the downloads page (28 Feb 03), and the other program updates. The remote control center & Recorder updated, the others say I have the latest version.
    Now I'm back to the same startup-freeze-reboot cycle that I had on my old HD. Booting in safe mode isn't easy to do either.
    Anybody have any suggestions to help me be able to use my computer and beloved Creative software without a win98-like experience? I'm at a loss at what to do......

    I'm a little seasoned in this stuff. It seems to me that your problem is not related to the Creative card, driver, or software. For this kind of help it might be more helpful for you to try posting your problems and all system information on forums like help.com (CNET), WindowsBBS, the Microsoft forums, computing.net, etc, etc.
    I could try to help troubleshoot you but I would be the only one helping you, whereas if you post to those other kinds of computer forums you'll get access to lots of folks who have varied experiences.
    You've got some work ahead, but keep at it and you'll get things running again.

  • T400 Intel GM45 driver install issues

    My T400 has switchable graphics using the Intel GM45 drivers as one option.  I'm trying to update the integated grpahics driver to 8.15.10.2226.  Unfortunately though, I've never been able to update GM45 display drivers with any Lenovo driver because the install process has always stopped with the error, "This computer does not meet the minimum requirements for installing the software".
    This morning, I decide to just uninstalled the Intel drivers and after a couple reboots now see the GM45 display drivers being reported as 8.15.10.2141.  This version doesn't appear in the list of Intel drivers provided by Lenovo but actually falls in-between two versions!
    The other issue that has surfaced now is when switchable graphics are enabled in BIOS, the system crashes with a blue screen during startup.  It will run discrete graphics mode only or Integrated graphics only but not both.  My ATI HD3400 graphics driver is 8.752.4-101022a-107489C, dated 11-15-10.
    Thanks for any suggestions or advice...
    T400 2764CTO
    Windows 7 x64

    The installer (.exe file) extracts the files before giving me the error message. So when the "Add New Hardware Wizard" pops up on a restart, I try manually pointing it to the driver in the intel ../DRIVERS/WIN/DISPLAY2/Graphics sub-directory. This didn't work the first few times I tried it. Then on the 4th or 5th time, it saw the driver and installed it. However, upon a restart, it popped up the "Add New Hardware Wizard" again and the VGA Controller was again listed under Unknown Devices in the Device Manager. Anyways, thought some more info might be helpful. Thanks again in advance for any help

  • Dell Inspiron 20 3048 Wifi driver install issue

    My new machine came with ubuntu, and i installed windows which i have, and now when i was about to install wifi driver ((which comes along bluetooth)) It asks wid a YELLOW TRIANGULAR WARNING SIGN
    " Activate Blutooth using wireless switch " My bluetooth is ON and visible to other device, Now i cant use wifi... please do source me help... thank you... Its like bought new machine, and cant do anything at all

    Hello,
    Was the wireless and bluetooth working when all that was on the system was Ubuntu?  And which version of Windows are you trying to install?  
    You may want to check out the product support pages for the Inspiron 3048.  Particularly the Quick start guide and the user manual.  The quick start guide will aid you in setting up your wireless card, depending on which version of Windows you have.  The user manual will help show some troubleshooting steps that you can use.
    I would also recommend checking out our Networking and Wireless Support Center for more help in troubleshooting your problem.  
    I would also recommend checking out this thread that has one solution to the problem that you're seeing.
    Please let me know if any of this helps, or if you resolve the issue in a different way.
    Thank you,
    Todd 

  • 17" MacBook Pro Core i5 Boot Camp Nvidia 64 bit driver install issue

    Can't get correct Nvidia driver to install on 17" MacBook Pro core i5. Windows 7 64 bit is installed and running but its using a standard VGA driver for the video card so the full resolution of the display is unatainable. I've loaded the snow leopard windows 64 bit drivers, downloaded the BootCamp 3.1 64bit drivers and installed but each time I try to run it the Nvidia part of the installer closes with the error, you are trying to use a 32bit uninstaller for a 64bit program, and it exits. I've double checked to make sure I have the 64bit driver installer instead of the windows 7 32bit installers but I still get the error every time. I then downloaded Nvidias own driver for windows 7 64bit Gt 330M and it gets the same error. Please help?

    A number of people in this and other forum threads have reported problems with the Nvidia drivers when installing Windows 7 (64bit) on the new Macbook Pro (April 2010).
    The problems appear to be due to an installation of Boot Camp 3.0, followed by the update to Boot Camp 3.1. As Boot Camp 3.0 does not include the Nvidia graphics drivers for the
    Macbook Pro 2010, the graphics card is not recognized and the subsequent update to Boot Camp 3.1 does not complete successfully.
    The proper approach consist of installing Boot Camp 3.1, which is included in the system disk that shipped with the laptop. A copy of that version was posted e.g. here
    http://files.me.com/jason_fearing/an51fn. One should not use on the Macbook Pro 2010 the Boot Camp version 3.0 that shipped with the original DVD of Mac OS X Snow Leopard.
    I had the same problems that were reported in the forum, when installing Boot Camp 3.0 + Boot Camp 3.1 update on Windows 7 (64bit). First I had to manually run the 64bit Boot Camp setup, as suggested by others, and then I had to install the Nvidia drivers with the modified INF files from http://www.laptopvideo2go.com/, as the graphics card was not recognized.
    However when I used the proper Boot Camp 3.1 that came with the laptop, everything went completely smoothly and the installation consisted of just clicking on the setup file.

  • WoW Wireless - Driver install issue WinXP

    I have my headset plugged in and working fine. However, I cannot get the software pack installed, so I cannot use the illumination features.
    The error I am getting is:
    File error [@S]CRC1,0xfbcd1916:0x3577324c
    This is using the SBWH_PCUSBDRV1_LB_1_01_0001.exe driver
    Any ideas how I can resolve this?

    That is a CRC error or Cyclic redundancy Check which means your download may be corrupted or the location the files extract to is full. if you have WinRAR or WinAce or even 7-zip, you can right click the executable file you download and choose EXTRACT To...........whatever location. I usually use a temp folder on the desktop for easy access. Once the files are downloaded, look inside that folder and find the setup.exe file. Run it and see if it installs. Usually when you double click Creative's executable it installs to c:\windows\temp or %user%/tmp or something similar. Those folders may be full of all your previous program installs. Try it my way and let us know how it goes.

  • Driver install issues with 8800gt 512 OC

    been searchin msi site for help on this but couldnt find anything.  Trying to install the 8800gt 512 OC on updated win xp pro.  installation gets to 50% then screen goes black with dos like cursor at top left-cant type anything.  restart once windows hangs mid load.  restart again andi have to load previously known good configuration.  driver remains uninstalled. 
    GEAR LIST:
    asus p5n-d
    intel quad q9300 2.5ghz
    hitachi sata 750 gb
    Rosewill 550w psu
    corsair 4gb(2x2) 800mhz ddr2

    Quote from: apm13 on 05-May-08, 04:03:28
    Haha YES!  the forceware 174.93 did the trick.  thanks aaron.  If you dont mind could you explain why it worked?  im curious and would like to get a better understanding of some of this stuff.  even just a link somewhere would be great.  thanks again
    They're newer and contain lots of fixes.

  • Sun StorEdge 2U SDLT 600 Tape Drive install issue

    After installing the tape drive and doing a scsi probe I get the following errors:
    ERROR: LSI1030 MPT FIRMWARE, FAULT CODE:
    8112: PCI BUS FAULT
    ERROR: LSI 1030 COULD NOT SET INITIATOR ID.
    CANT OPEN SCSI HOST ADAPTER.
    What would cause this? hardware is brand new also.

    Hi All,
    Thanks for your help.
    The problem is now solved when i proceeded as followed:
    1. When i executed the command cfgadm -al
    the output showed the below information about the tape drive controller:
    c3              Connected        unconfigured             OK
    I disconnected the controller and then run the devfsadm -c tapes which took about 1 hour to complete and then, now the system can detect and tape and the first backup run
    successfully.

  • Mac OS 10.5.8 too old for HP deskjet 2514 driver and I can't download new Mac software. HELP!

    Hi,
    I have an older Mac with the OS 10.5.8 system. It's too old to download to 10.6 the new Mac software because it's not intel-based so I can't download the driver for the printer.
    I've been trolling the hp support boards and there doesn't seem to be a solution. So is my printer essentially useless with my computer?
    Please help =)

    hi, you would need to state what make and model the printer is for anyone to help

  • Audigy 2 ZS driver install issues wtih Vista Ultimate 64-bit

    I am having a really hard time installing these available drivers for the above card and OS listed. I can download the drivers just fine, but when I go to install them I get the "no supported product found" message. I know that windows can see it and my copy of Everest Ultimate sees it as well, but for whatever reason the drivers can't seem to find it anywhere.
    Does anyone know a solution?

    Nothing huh? Nobody has any idea about this or knows of another thread where this question was answered?
    Thanks in advance if you can help out!

  • Printer driver install issues for Officejet Pro 8500A

    This printer was working seamlessly for a couple of years and now all of a sudden the drivers will not download properly. I am at mt wits end, please help! Thanks

    They should be here.
    https://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&lc=en&dlc=en&product=4116838
    Say thanks by clicking the Kudos Thumbs Up to the right in the post.
    If my post resolved your problem, please mark it as an Accepted Solution ...
    I worked for HP but now I'm retired!

  • I am having sporadic issues after new hard drive install and recovery using Time Machine. The same sluggish response, start up screen pixelating...If I reinstall Lion will it wipe out other applications? My HD was formatted and partitioned correctly, I ha

    I am having sporadic issues after new hard drive install and recovery using Time Machine. The same sluggish response, start up screen pixelating...If I reinstall Lion will it wipe out other applications? My HD was formatted and partitioned correctly, I have a late 2009 iMac.

    Use the trackpad to scroll, thats what it was designed for. The scroll bars automatically disappear when not being used and will appear if you scroll up or down using the trackpad.
    This is a user-to-user forum and most people will post on here if they have problems. You very rarely get people posting to say there update went smooth. The fact is the vast majority of Mountain Lion users will not be experiencing any major problems with the OS, or maybe with apps which are not compatible, but thats hardly Apple's fault if developers don't update their apps.

  • Install issue with CD drives / and burning

    I am running Windows Vista 64 on a new computer I built (latest ASUS P5K-E with a quad Q6600 cpu and 4gigs of RAM). I transferred all my music and installed iTunes. Everything is working fine except for the burning of disks. It did give me a prompt at the end of the iTunes install and on first startup that there may be a problem recognizing the CD drives. However, there is no problem importing music on those CD/DVD burner drives -- but I cannot burn on those drivers. I can burn using other software on these drives -- no issues with the drives at all. Under iTunes "Preferences", and 'Burning' it states "No supported Disk burners found". Both are Lite-on CD/DVD burner drives and less than a year old -- and of course worked on the old XP computer with iTunes. I have uninstalled, reinstalled iTunes -- no luck. Any ideas? This looks to be something in the Registry on install, but not sure what to do. Any help appreciated.

    You may need the CD Configuration folder too, after you install the drivers.
    Here is the CD Configuration folder, with the Files you need Just Unzip it and place the CD Configuration Folder into Your C:\Program Files (x86)\iTunes Directory
    http://stahlhammer89.com/apple/CD_Configuration.zip
    I had my friend with Windows Vista x86 Install iTunes and give me the Folder and Files I needed.
    Hope this helps you

Maybe you are looking for