HP deskjet 3050 no longer connects to wireless since changing the router
The printer no longer prints to wireles or when connected via USB for that matter. Recently changed routers and now it doesn't pick up the printer. I have tried to reinstall the software and that hasn't made a difference. Help please!!
Hi nikki879,
Here is a way you can connect the printer to your router:
-Restore network defaults inside the wireless menu on the printer front panel.
-From your computer, connect wireless to the printer's network (it should be a name similar to HP-Setup-xx-Deskjet 3050A J611).
-After successfully connecting to the printer, open your web browser and type in 192.168.223.1 in the addressbar and press enter.
-Click on Wireless Setup Wizard
-Select your router and enter the password to connect the printer to the router.
Rerun the printer software from your computer to rediscover the printer over the network.
Show support by clicking the Thumbs Up in the post that resolved your problem. Doing so will help other forum members find their solutions too.
Similar Messages
-
HP Photosmart B209a no longer connecting to wireless since modem/router change
I recently had to change from a Motorola Surfboard modem and Netgear router (both at least 5 years old). The new modem/router combo is a C3700 Docsis 3.0. My HP Photosmart Plus printer model B209a no longer connects to the wireless network. I've tried both push button and pin. I get a WPS failed to connect. When I print network settings my network is listed but the printer shows as being offline with no active conection . Firmware is EIL1FNO926AR and shows up as the latest revision for the printer. Under 802.11 Wireless the mac address is given and status is disconnected. By the way, the printer and modem/router are approximately 3 feet apart on the same desk.
Any ideas as to what to do to get my printer back online or is incompatible with the new modem/router?
Thanks
This question was solved.
View Solution.Replacing your wireless router try here.
http://www.hp.com/global/au/en/wireless/reconfiguring-system-help3.html
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired! -
TV no longer connects to wireless internet after installation of Airport Time Capsule
TV no longer connects to wireless Wi-Fi internet after installation of AirPort Time Capsule.
I am having a similar problem with a new TIme Capsule. The wifi on the Time Capsule was working fine for months with all devices, iPhone 4s, iPad Air, iMac Air, Mac mini, and vizio smart TVs. After a recent software update the Time capsule wifi no longer connects to the smart tvs or the iPhones. It still connects to the mac mini, iPad and iMac Air. I do NOT think the software update timing was just coincidental. But I have not found any information or other users confirming a similar problem on the Apple support site.
-
My wireless keyboard no longer connects with my iMac since changing the batteries. It now shows as not connected, not paired and not configured. A friend recently connected his iPad to the iMac and since then the problem started. Any ideas to resolve this?
a friend told me that he wants my os x cd for my macbook pro to upgrade his imac.
The discs that come with your Mac are "machine specfic" and cannot be used on another Mac. -
My macbook pro no longer connects to my TV with the mini dvi to hdmi adapter. A while ago the computer fell down and hit the cable. How can I tell if the computer is working ok. Doesn't show mirroring any more. Was working while watching a movie but when I pulled it out from the computer and put it back in the system would no longer mirrorr the screen on the TV.
The best option is an appointment at an Apple store genius bar. The evaluation will be for FREE!
Ciao. -
Can not connect my wireless printer to the new router.
Can not connect my wireless printer to the new router.
Can you please provide details:
1. The make and model of printer
2. Make and Model of Wireless Router
3. Is your printer connection wireless to router or a cable to PC
4. What have you done or attempted to do to establish a connection?
5. Any further info to assist -
Can no longer connect to internet since express intalled!
Hi
Been trying to configure my AE for iTunes and seem to have buggered up my general wifi settings. My router has not changed (since all my other mac's can connect OK), but the machine I was configuring AE on just says:
"Airport is connected to the network xxxx. Airport has a self-assigned IP address and may not be able to connect to the internet"
It is set to DHCP, but keeps getting one of those useless 169.x.x.x addresses instead of the 192.x.x.x ones. I have no changed the router at all.
How do I reset my airport connection?
ShaunTo set up AirTunes on the AirPort Express Base Station (AX), connect your computer directly (using an Ethernet cable) to the Ethernet port of the AX, and then, use the AirPort Admin Utility to check these settings:
AirPort tab
- Base Station Name: <whatever you wish or use the default>
- Wireless Mode: Join an Existing Wireless Network (Wireless Client)
- Wireless Network: <select the existing wireless network>
Music tab
- Enable AirTunes on this base station (checked)
- Enable AirTunes over the Ethernet port (optional)
- iTunes Speaker Name: <whatever you wish>
- iTunes Speaker Password (optional)
In iTunes:
iTunes > Preferences... > Advanced > General
- Look for remote speakers connected with AirTunes (checked) -
I upgraded my iPad 2 (3G) to the new OS8 and I can no longer connect to 3G. All the settings on the iPad are correct. It just shows that it's searching for a signal. I'm in an area where my signal (pre OS8) was very good in strength. Please help!
Hello Jpahlphoto!
I'm sorry to learn about the issues mentioned in your post. Let's fix this for you OK?
Please restore your iPad and see if that does the trick. You'll find the steps here:
http://bit.ly/16hQAlr
Thanks,
ChristinaB_VZW
Follow us on Twitter @VZWSupport -
please help ive tryed everything and i cant get my ipad to restore, ive discontecting it, defult starting it and no matter what my laptop keeps telling me that "this device is no longer connected " and on my ipad the apple logo comes up but the bar does not load please help !!!! i need my ipad for lectures
Hi rhiess,
Thanks for visiting Apple Support Communities.
It sounds like your iPad may not have restored fully. I'd recommend restoring it again with the iPad in recovery mode.
Use the steps in this article to place your iPad in recovery mode:
iOS: Unable to update or restore
http://support.apple.com/kb/ht1808
After placing your iPad in recovery mode, use the steps in this article to troubleshoot the connection between it and your computer:
iOS: Troubleshooting USB connection
http://support.apple.com/kb/TS1286
If you still don't see your device in iTunes, follow these steps for Mac or these for Windows.
Best Regards,
Jeremy -
Hi I run the 6.0.2 patch and I stiil have the same problem, no wifi connection even if i change the wireless antenna and the security any ideas??
There are two steps to the update for an iPhone 5. First you run the patch then you update the iOS. Did you do both? And does iOS 6.0.2 show up in Settings > General > About > Version
The first thing apple will tell you to do if you bring them the phone is to reset the phone. Try that before going any further.
First thing to try is to reset your device. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider should one appear until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem. -
my wireless key board doesn't seem to communication with my computer even though bluetooth shows it is connected. I have changed the batteries on the keyboard and when turn on the key board the green lights comes on shortly and disappears. Can any one help?
Hey Annar99,
I found a few articles that might help with the issue you're encountering. These first two are if the Bluetooth keyboard you're using is the one that came with your iMac. The first is a general "how to" for setting up your Apple Wireless keyboard, while the second one is for troubleshooting if the advice in the first article isn't working:
Bluetooth: How to set up your Apple Wireless Keyboard
http://support.apple.com/kb/ht1809
Troubleshooting wireless mouse and keyboard issues
http://support.apple.com/kb/TS3048
If, on the other hand, you're using a third party keyboard, then I would take a look at the following article's troubleshooting section:
Bluetooth Quick Assist
http://support.apple.com/kb/HT1153#Tips
Hope that helps,
David -
I just got my cable company to switch my wireless router to a wired one considering now I have the wireless airport device (the newest one) but now I can't get a wireless signal. The router works when directlyplugged in,the aiport wireless device is green. I've tried going through my new MacBook Pro settings and it the diagnostics check, it says network changes detected, I tell it that it "yes" does connect to a cable modem, it tells me to restart it, after I do it asks if there are any other devices hooked up ( firewall) and when I say no it tells me that it can't fix the problem.
Now I know that I probably have a new IP address because of the cable company switching the boxes but it was working fine with the other box, now there isn't a signal to be had on it!
Please anybody out there that can help!!!??Any time you change networking hardware it is always a good idea to perform a complete power recycle with the new equipment. Check out the following AirPort User Tip. Please post back your results.
-
Can't use Find My Friends on iPhone due to Apple ID not being verified.
Can't do this as I can't access my .mac email any longer and I can not change the primary e-mail address for my Apple ID!
So my options are:
Create a new Apple ID, use that and lose all the apps I've purhcased with it (a fairly substantial amount)
Somehow Migrate these purchases over to a new Apple ID
Apple let me change the primary ID for the account
Anyone else ran into this before?
I've tried accessing the mail through a mail application using the correct server information, and trying both the old 6 character password and the one I had to change it too after they updated the security guidelines - neither work.
Help would be greatly appreciated as I can see more services down the line not working without the address being verified!To change the iCloud ID you have to go to Settings>iCloud, tap Delete Account, provide the password for the old ID when prompted to turn off Find My iDevice, then sign back in with the ID you wish to use. When you do this you may find that the password for your old ID isn't accepted. If this should happen, and if your old ID is an earlier version of your current ID, you need to temporarily recreate your old ID by going to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Click edit next to the primary email account, change it back to your old email address and save the change. Then edit the name of the account to change it back to your old email address. You should not need to verify the old email address. You can now use your current password to turn off Find My iDevice on your device, even though it prompts you for the password for your old account ID. Then save any photo stream photos that you wish to keep to your camera roll. When finished go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was. Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.
-
HT1199 I-pod no longer reconised by computer since downloaging the latest upgrade from i-tunes?
Ipod no longer reconised by computer since downloading the lastest upgrade from i tunes.
Same here.
I have tried all the repeated reccomendations I've found in other posts.
Nothing has worked.
I have tried installing older versions of ITunes also...will not recognize my library so it will not start up. Have tried rebuilding it. Not working....
One thing that did work was resetting my Ipod nano...now all I have is the message "Please use Itunes to sync music to this Ipod." :/ -
Strange issue when pausing LONG audiobook--pressing play again changes the
Strange issue when pausing LONG audiobook--pressing play again changes the position within the book--it doesn't start back exactly where it left off.
The audiobook of "Harry Potter and the Half Blood Prince" is between 18 and 19 HOURS long--all as one long track/file.
I've noticed that when I pause while listening and then press play again, it "rewinds" and starts playing portions of the audiobook from about 10 minutes prior--but the time stamp doesn't change. At least this is the time frame from the first "test". Other pauses/plays may result in different time differences.
The first time this happened, I didn't realize what it was doing. I pressed play (from the pause) and I heard a portion that I had already played. I thought that the bookmark just didn't "remember" as it should have, so I scrubbed forward trying to find where I remembered leaving off. If you end up pausing/playing even a couple of times with this happening each time, the portion of the audiobook that you're playing and the time stamp becomes COMPLETELY off! For example, almost an hour into the time stamp was really only about 10-15 minutes into the actual book.
I'm not sure if this makes any sense, but hopefully it does to someone. It's very frustrating to have this happen simply because you had to pause while listening. You have to scrub backwards or forwards each time to find out where you REALLY left off at and the time stamp becomes of no help value since it doesn't change as the playback position moves itself.
I'm sure that this is something happening due to the extreme length of the audio file. That maybe it can't track as precisely as it could with shorter lengths. ???
Any ideas? Has anyone else seen this happen? Any ideas on whether or not there is anything that can be done to prevent this?I'm glad that I'm not the only one having this
problem. It's ironic that we're both having issues
with the SAME audiobook. I haven't had a chance to
listen to Books 1-5 much to see if they have the same
issue or not--I don't remember any on the few parts
that I've played for my nephews.
Yeah, I know! I was shocked to see that. I recently finished HP5 (twice), and NEVER had this issue, but it is a much smaller file size.
I'm thinking that I may try to convert to AAC before
I try the splitting program--in theory, it's easier
to start right back in again when you only have 1
track to find, than when you have dozens/hundreds of
smaller tracks. It's sometimes hard to remember
which track you left off with--even if it's
"bookmarked" within that track.
I dunno anything about AAC, to be honest. Never used it. My plan is to split the MP3 into smaller MP3s by chapter and load them on a playlist. Of course, I will have to label them all nice and pretty. It is a long book, but you could always just load a couple of chapter files at a time. The only thing that I can see that would be kind of a pain about splitting it with the Cool MP3 is searching thru the file for each chapter and setting break points.
My only concern is how much quality I'm losing by
converting from one compressed format--MP3--to
another compressed format AAC.
Yeah. Ew. No clue. Sounds unpleasant to me. Again, I really do not do anything with AAC.
I suppose, since it's
spoken word instead of music, the change shouldn't be
too noticable. I'm not sure what kind of time frame
it'll require to convert. I'll probably try it with
book 1 first--since it's the smallest.
May depend on the program. The one I got boasts no quality loss. You may wanna scrounge around the download sites and see which one sounds like it has the best features, even if you do just get a free trial version of something. I would definitely read the editor's ratings. I tend to trust that more than the typical end user's. They show how many stars the editor gives a product, and you can click that for the review, or sometimes they have labeled tabs where you can access the review.
As for how long it takes me to rip that particular file and if that actually fixes the scrubbing problem, I will have to let you know tomorrow. WAAAAY past my bedtime!
Keep me updated on your end. I sure which that there
was an explanation for why it happens.
Will do! I am thinking you hit the nail on the head with the length. That was exactly what popped into my mind when I figured out what the goofy thing was doing.
Talk to you later!
HP dv5117d, iTunes 7.0.2.16 Windows XP Pro 1st gen 4GB nano, sw ver 1.3
Maybe you are looking for
-
Problem in sender file adapter
Hi all, I have a sender file adapter using ftp with processing mode delete. But my input file is not getting deleted. In RWB, the adapter satus is green with msg processed sucessfully. I tried with a file name that is not available in the ftp folde
-
How do I sync iMessage from iPhone to iPad mini
I can't seem to receive iPhone iMessages on my iPad mini?
-
Can we add a pushbutton on the list ?
Hi, I have to print a internal table and a push button after the list. I can do it by SE41 but that can't be done at the end of the list. Is there any way to put pushbutton at the end of the list. or can we write a internal table contents on the sel
-
we are having a problem getting an audio connection when using iChatAV and isight cameras. Sometimes it works, sometimes not. We always seem to get a picture but getting audio is very hit and miss (usually miss) and only one way. I can not hear the o
-
Browsers crash when loading the swf!
Hi all using Mac OSX. Safari, FireFox and Opera sometimes crash when opening this page: http://annetteberrydesign.com/index_content_new.php sometimes they don't crash... It seems random, but they often crash. There is something wrong with the swf for