HP Deskjet 3050 - Unable to connect to WPA secured wireless network
Hello,
My first post here so please excuse any faux pas on my part. I bought this HP Deskjet 3050 a week ago and have been waging war with it ever since. I'd be really grateful if someone could possibly advise on how I can resolve this.
I am unable to connect the printer to my secured wireless network, even though other computers, cell phones, etc. are connected without issue. I have tried WPA, WPA2 and WPA2-Mixed security modes with the same failure. Specifically, the connection wizard reaches 66% and then displays the error that the wizard is unable to find network/printer. If I disable the security, the printer connects fine.
I'm using a Linksys WRVS4400N router with firewall and associated firewall settings disabled. The router is broadcasting on 802.11G/N mixed mode.
I'm installing the software supplied on the setup CD on a Windows XP SP3 system. I have confirmed that the network the PC and printer are connected to are the same.
A question as well, if I may: I haven't tried these drivers yet but I see there are updated drivers for the printer dated 14/12/2010. The release notes indicate improved networking, but don't elaborate beyond this. Does anyone know if there was a known problem with connecting to secured networks that has now been fixed?
Finally, just a note that I'm partially sighted and am using a screen reader on all systems. I'll try my best to be as helpful as I can but please do excuse me if I occasionally can't find settings, etc. on screen and need a bit more detailed help.
Thanks in advance for your help, which I really will appreciated.
Have a pleasant day,
All the best for now and take care,
Hussein.
It's not the fact it can't be done, it's the fact it hasn't been done, yet.
This question was solved.
View Solution.
HI,
firstly, apologies for the delay getting back to you. Poor health has meant I've had little time nor inclination to do much on the computer side of htings.
Anyway, I'm please to say the problem with the HP 3050 failing to connect to my network is now solved. It seems to be a bug with the setup software, and that seems to include the latest version posted Dec 2010.
To resolve the problem, I did the following:
1. Disable all security options for the network, so it's just an open network.
2. Connect the HP 3050 to the network using the setup wizard. This time it connected OK for me.
3. Locate the printer's IP address. I used the client list table accessed through my router's interface. You may be able to get this through the printer's on-screen menu, but as I'm partially sighted, this wasn't an option for me.
4. Log into the printer's control panel at http://ip.address.of.printer e.g. http://192.168.2.108
5. Under the advanced options, configure the settings for the network, including security protocol and passphrase. Remember to enter the SSID of the network exactly as configured on the router.
6. Apply the settings and log out of the printer's control panel.
7. Log back into the router's control panel and re-apply the security options. Be sure that they match those match those entered for the printer.
Hopefully this will be of use to others in the same position.
Thanks again for your time.
Best,
H.
It's not the fact it can't be done, it's the fact it hasn't been done, yet.
Similar Messages
-
Hi,
I have a Dell Latitude E6440 running Win 7
Enterprise 64 on a domain. It will connect to any unsecured network, and it can see the secured network in the list when I click the wireless connection icon on the system tray. When I go to manage wireless networks, the secured network does not show
up (and thus, I cannot delete the network to try to re-add it). Normally, we would add the secure network here. I click Add, give the name in the correct syntax, add the needed information (WPA/2-Enterprise, EAS or TKIP), and hit Next, it immediately returns
with "An unexpected error occurred". A similar thing happens when I hit Connect from the list of available networks that pops up when I open the system tray icon: it says it was unable to connect, when I hit troubleshoot, it says that it could not
identify the problem. The event log shows the error below. I haven't been able to find any resolutions here or elsewhere that address the fact that I can connect to unsecured wireless networks, but not secured wireless networks.
Other notable troubleshooting steps:
Uninstalled/Reinstalled wireless adapter with the latest driver
Other laptops are able to access the same secure wireless network
The first WLAN-AutoConfig error in the event log was Event ID: 12013, attempting a 802.1x authentication. Then Event ID: 11006; stating "Explicit Eap failure received". After a few days of alternating all 3 errors, they started to only error on
Event ID 8002.
Log Name: Microsoft-Windows-WLAN-AutoConfig/Operational
Source: Microsoft-Windows-WLAN-AutoConfig
Date: 6/4/2014 11:53:55 AM
Event ID: 8002
Task Category: AcmConnection
Level: Error
Keywords: (512)
User: SYSTEM
Computer: [COMPUTERNAME.DOMAIN]
Description:
WLAN AutoConfig service failed to connect to a wireless network.
Network Adapter: Intel(R) Centrino(R) Advanced-N 6235 Interface GUID: {f27af762-dff8-4927-84e0-7f4ade30dcc9}
Connection Mode: Connection to a secure network without a profile Profile Name: [SECURE NETWORK NAME]
SSID: [SECURE NETWORK SSID]
BSS Type: Infrastructure
Failure Reason:The specific network is not available.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-WLAN-AutoConfig" Guid="{9580D7DD-0379-4658-9870-D5BE7D52D6DE}" />
<EventID>8002</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>24010</Task>
<Opcode>191</Opcode>
<Keywords>0x8000000000000200</Keywords>
<TimeCreated SystemTime="2014-06-04T16:53:55.956762800Z" />
<EventRecordID>1475</EventRecordID>
<Correlation />
<Execution ProcessID="432" ThreadID="5348" />
<Channel>Microsoft-Windows-WLAN-AutoConfig/Operational</Channel>
<Computer>[COMPUTERNAME.DOMAIN]</Computer>
<Security UserID="S-1-5-18" />
</System>
<EventData>
<Data Name="InterfaceGuid">{F27AF762-DFF8-4927-84E0-7F4ADE30DCC9}</Data>
<Data Name="InterfaceDescription">Intel(R) Centrino(R) Advanced-N 6235</Data>
<Data Name="ConnectionMode">Connection to a secure network without a profile</Data>
<Data Name="ProfileName">[SECURE NETWORK NAME]</Data>
<Data Name="SSID">[SECURE NETWORK NAME]</Data>
<Data Name="BSSType">Infrastructure</Data>
<Data Name="FailureReason">The specific network is not available.</Data>
<Data Name="ReasonCode">163851</Data>
<Data Name="ConnectionId">0x6</Data>
</EventData>
</Event>check this article:http://technet.microsoft.com/en-us/library/cc735927(v=ws.10).aspx
also could contact your domain administrator to ask for help. -
Deskjet 3050 will not connect via wps or wireless
We recently changed to century link and the wireless printer does not connect to the internet. I deleted and tried reinstalling the software but with Mac OS X Maverick it doesn't show any or recognize it. The printer works connect through USB. In the HP Network configuration it says netwrok status offline active connection type none under 802.11 wireless status is disconnected everything else says enabled and my netwrok was discoved with the SSID at page bottom. I called centurylink and they are confident their settings are correct.
Hi gchart57,
Your model printer connects to a network with the aid of the HP software, either for Windows or Mac. The driver provided through Apple for OS X 10.9 does not have the ability to connect the printer to the network. It must already be connected.
WPS is normally a valid way to connect, but you might have to reset the wireless on the printer to get that to work. This
Another method is to use a computer running Windows or an older version of OS X to connect the printer to the network and then Mavericks can see it.
I was an HP employee.
Please mark the post that solves your problem as "Accepted Solution" -
I am new to IPod Touch and enjoying but all of a sudden (after about a month of connection) I am unable to connect to either my home wirless or hotspots outside of home. It would appear that a setting has changed but have no idea how to determine. Any suggestions ?
NO I did not and thank you very much for the advice. My problem was stated incorrectly in that while I am able to connect to the wireless from that point on I am unable to connect to the internet. I will check the article referred to.
-
Unable to connect LaserJet CP1525nw to Wireless Network
I have new Ubiquity router. It is broadcasting our SSID. I am trying to connect a LaserJet CP1525nw to the wireless network. I cannot figure out a way to enter the SSID on the printer. The Ubiquity router does not have a WPS button, so that is an option. I did attempt to use the USB connected device, but the installer would time out, always providing the same error, that it could not connect to the printer (this in spite of the fact that the printer is on and connected via USB).
Hi Kfran615,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I see that you are having some issues when attempting to install the printer. So I can better assist you,please respond with which Operating System you are running.
Which Windows Operating System am I running?
Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
Thank you for your time.
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP -
I have a net gear n300 router transmitting my WPA secured network, and I bought an airport express to use as a network extender. I configured it via an Ethernet cable from a MacBook using manual setup in airport utility. I got the green checkmark at the end, but it is not extending my signal. Can you help me?
Unfortunately, most non-AirPort routers are not compatible with Apple's implementation of Wireless Distribution System (WDS)...so it very unlikely that your Netgear router can be extended wirelessly with the AirPort Express Base Station (AX).
The few non-AirPort routers that are known to work are:
Linksys WRT54G or WRT54GS (not v5)
Belkin F5D7230-4 and F5D7231
BT Voyager 2091
Netgear WGR614 v6
Buffalo WGR-G54 -
Unable to Connect to WPA/WPA2-Enterprised network
I work for a private company, and we have a WPA-Enterprised network. Company provide following settings for Blackberry users.
Name : IxWLANP
SSID: IxWLANP
Band Type: 802.11 b/g
User Name :
Password:
CA Certificate: None Selected
Interlink Security : EAP-MS-CHAPV2
Token: None
Select Disable Server Certificate.
What I have configured for my Nokia E72 is as follows:
Connection Name: IxWLANP
Data Bearer: Wireless LAN
WLAN Network Name :IxWLANP
Network Status: Public
WLAN Network Mode: Infrastructure
WLAN Security Mode : WPA/WPA2
Under WLAN Security Settings
WPA/WPA2: EAP
Under Plug-in settings:
EAP-PEAP only selected
Under EAP-PEAP edit mode:
Personal Certificate: Not defined
Authority Certificate: Not Defined
User Name In US: User Defined
User Name: ******* (My User Name)
Realm In Use: User Defined
Realm: Blank
TLS Privacy: OFF
Allow PEAPv0 : yes
Allow PEAPv1 :No
Allow PEAPv2 : No
Under EAPs: EAP-MSCHAPv2 Selected
User Name: (My USer name)
Prompt password: No
Password : (My Password.)
No change in ciphering
WPA2 only modeff
This is all I have done.
Network is showing as known network. But If I am trying to connect to any web page its saying EAP-PEAP authentication Failed.
Blackberry/ Samsung/ Apple works fine. This problem is only with nokia. Please reply urgently.
Please help.I have also a problem to connect my E72 to my company network.
The settings are:
Network Authentication: WPA2
Data Encryption: AES
Authentication Type: Protected EAP (PEAP)
Authentication Protocol EAP-MSCHAPV2
HAve someone of you an idea or what I have to do that it works?
Please help. Thank you.
Argisch -
Apple TV fails to connect to WPA-protected wireless network
Tried different settings and it always fails to connect. It does display a code of -3 ... does anybody know what that code means?
If I disable WPA in my wireless router, and remove the WPA key configuration from my Apple TV, than the connection succeeds and I have done that for brief periods of time but cannot keep it that way.
Any insights?BTW, my wireless router is configured for WPA Personal (no Radius), Pre-shared-key, TKIP (AES does not seem to be an option).
-
Not able to connect on my secured wireless network
I am having WRT54G2 router and i configure my router for my home. I configured it as secured network. I have a laptop (IBM Thinkpad R52). But i am not able to connect my home wireless secured network. When i try to connect any other unsecured (open to all) network from my laptop it allows me. For any secured network it says Acquiring Network address. What should I do?
What encryption are you using?
What operating system are you using?
For WEP, you must enter WEP "key 1" (found in the router) into your computer, not the WEP password or passphrase.
For WPA or WPA2, you must enter the key (sometimes called password or passphrase) into your computer.
Note that WPA2 (= WPA with AES) requires that you upgrade Windows XP to SP3. If you have not done this yet, do this now. Note that Windows Vista already works with WPA2.
If you still have trouble connecting, in the computer, temporarily disable your software firewall, including Windows Firewall, and see if that helps.
If you still have trouble, download and install the latest driver for the wireless adapter in your computer.
Message Edited by toomanydonuts on 05-30-2008 01:22 AM -
Can't connect to any secure WiFi network. Help...!
Hello,
I am unable to connect to any secure wifi network. Using iPhone 5, Model : MD300B/A, Software : 6.1.4 (10B350). Whenever I try to connect to any secure wifi network, it says password incorrect. But it connects fine with unsecured networks. Double checked the same secure networks with my iPad and it works fine. Tried reseting the network settings and all settings. Updated to latest firmware (6.1.4). Still not working.
Please help.
Regards,
MadhavanI have the same problem. I can't connect to any password protected networks. I type in the correct password, but I'm unable to login. I don't have the option for the iphone to forget the network, because I've never been able to log in and therefore there is nothing to forget. The option doesn't even come up. Is anyone else having this problem? It is this way for 2 different networks.
-
Unable to connect to any secure sites with any browser
I am unable to connect to any secure sites. I downloaded Firefox with the hopes that it would fix the problem but it did not. What ever browser I use I cant connect to any secure sites. All of the other pages load correctly.
I have a PC notebook that I tried to load the same sites it worked fine, so I know that it is not a connecting problem.
emac Mac OS X (10.4.6)
ibook Mac OS X (10.2.x)Are you connecting via dial up or high speed through a router? If that latter, check the firewall settings of the router. I have my router set to medium (high, medium, low, & none) and it works most of the time. But occationally I get to sites that won't load and setting the router (temporarily) to low usually allows me to access those sites. So perhaps this is your issue.
I think there are ways to add those sites to router security lists or "services" that will now let them through with the higher security settings, but I need it so rarely I haven't bothered to figure it out yet.
Patrick -
iPad 2 doesn't recognise my password for wifi. Unable to connect. Tried resetting the network,changed the wap settings,nothing. Pswd is 9 characters. MacBook and iPhone accepts the password, not my ipad 2
Hey brainmasala,
Thanks for using Apple Support Communities.
Sounds like you are not able to connect to a Wi-Fi network with your iPad. This article has a section for Unable to connect to a Wi-Fi network and the second article is the recommended network settings. If after these it still has the same issue you may want to restore the device to factory settings.
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/TS1398
iOS and OS X: Recommended settings for Wi-Fi routers and access points
http://support.apple.com/kb/HT4199
Use iTunes to restore your iOS device to factory settings
http://support.apple.com/kb/HT1414
Have a nice day,
Mario -
HP Wireless Printers cannot connect to WPA2-secured WiFi networks with Cisco/Meraki WAPs
In the last two months, I've had the displeasure of working with two very different HP printers and attempting to make them work on a WPA2-secured wireless network. All attempts to authenticate fail with "invalid phassphrase".
I'm not the first person to encounter this, it's a problem with many different HP wireless printers (I just happen to have physical access to the OfficeJet Pro 8610 & Deskjet 3511).
My equipment is a Cisco ASA 5505 Firewall running ASA 9.1x & Cisco Aironet 1142 running IOS 15.3.x.
What does work on the WPA2/AES SSID: Apple MacBook Air running OSX 10.10.2, Three Windows-Based laptops running Windows 8.1 Update 1, an iPhone 5s, Three Windows Phone 8.1 devices, Roku 2, PlayStation 4, PlayStation 3, Sharp Aquos TV, Amazon Streaming Stick, and an Android Tablet (Jellybean). Basically, everything.
What does not work on the WPA2 network: OfficeJet Pro 8610 & Deskjet 3511.
To test the theory there is a problem with HP's implementation of WPA2 with regard to Cisco Aironet IOS, I built out a second SSID that only works in WPA/TKIP mode. This solution works. Both HP printers will join the WPA/TKIP network.
So, I'm able to demonstrate there is a certain connectivity issue. When i look at AAA Debug on the WAP's console, I can observe the HPs attempt to authenticate "Bind I/F" on the WPA2 SSID, however they do not achieve authentication and do not pass the AAA phase. However, on the WPA SSID, they bind and authenticate successfully.
To help illustrate this, here is my WAP running config. It's about as simple as it can get. There is no relevant MAC filtering or ACLs bound to any interface. Noting that I have an ACL on remote access to the WAP (i.e. Locked down to SSH, disabling telnet). The main point being that the ASA firewall is not a factor in this problem as the issue is at the WAP before WPA2 authentication can complete, therefore the printers never reach the network / when the printers connect to the WPA network, the operate fully & correctly.
If anyone at HP can indicate why this particular config is somehow improper or broken, that would be fantastic. There should be no reason why Cisco / Meraki WAP owners have to lower wireless encryption standards just for a printer, be forced into wired, create separate SSIDs with lower encryption specifically for a device.
Building configuration...
Current configuration : 6064 bytes
! Last configuration change at 12:46:47 UTC Fri Aug 20 1993 by admin
version 15.3
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
hostname 10-10-50-1
logging buffered 1024768
logging rate-limit console 9
aaa new-model
aaa authentication login default local
aaa authorization exec default local
aaa session-id common
no ip source-route
no ip cef
ip domain name freedom.local
dot11 syslog
dot11 vlan-name inside vlan 50
dot11 vlan-name inside-wpa-only vlan 70
dot11 ssid inside
vlan 50
band-select
authentication open
authentication key-management wpa version 2
mbssid guest-mode
wpa-psk ascii 7 xxxxxx
information-element ssidl
dot11 ssid inside-wpa-only
vlan 70
band-select
authentication open
authentication key-management wpa
mbssid guest-mode
wpa-psk ascii 7 xxxxxx
information-element ssidl
dot11 band-select parameters
cycle-count 3
cycle-threshold 200
expire-supression 20
expire-dual-band 60
client-rssi 75
dot11 wpa handshake timeout 500
dot11 network-map
username ADMIN privilege 15 secret 5 xxxxxx
ip ssh version 2
bridge irb
interface Dot11Radio0
no ip address
no ip route-cache
encryption vlan 50 mode ciphers aes-ccm
encryption vlan 70 mode ciphers aes-ccm tkip
ssid inside
ssid inside-wpa-only
antenna gain 0
mbssid
speed basic-1.0 basic-2.0 basic-5.5 basic-11.0 6.0 9.0 12.0 18.0 24.0 36.0 48.0 54.0 m0. m1. m2. m3. m4. m5. m6. m7. m8. m9. m10. m11. m12. m13. m14. m15.
channel 2412
station-role root
l2-filter bridge-group-acl
interface Dot11Radio0.50
encapsulation dot1Q 50 native
no ip route-cache
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 spanning-disabled
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
interface Dot11Radio0.70
encapsulation dot1Q 70
no ip route-cache
bridge-group 70
bridge-group 70 subscriber-loop-control
bridge-group 70 input-address-list 700
bridge-group 70 output-address-list 700
bridge-group 70 spanning-disabled
bridge-group 70 block-unknown-source
no bridge-group 70 source-learning
no bridge-group 70 unicast-flooding
interface GigabitEthernet0
no ip address
no ip route-cache
duplex auto
speed auto
interface GigabitEthernet0.50
encapsulation dot1Q 50 native
no ip route-cache
bridge-group 1
bridge-group 1 spanning-disabled
no bridge-group 1 source-learning
interface GigabitEthernet0.70
encapsulation dot1Q 70
no ip route-cache
bridge-group 70
bridge-group 70 spanning-disabled
no bridge-group 70 source-learning
interface BVI1
mac-address xxxx.xxxx.xxxx
ip address 10.10.50.1 255.255.255.0
no ip route-cache
ip forward-protocol nd
ip http server
ip http authentication aaa
no ip http secure-server
ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
ip route 0.0.0.0 0.0.0.0 10.10.50.2
logging history size 100
access-list 111 permit tcp any any neq telnet
bridge 1 route ip
line con 0
access-class 111 in
line vty 0 4
access-class 111 in
length 0
transport input ssh
line vty 5 15
access-class 111 in
transport input ssh
endI get the same behavior with a laserjet m451nw. I need to enable tkip to get the printer working, it doesn't support pure aes-ccm (every other device here supports pure aes-ccm, even cheap ones), although it's advertised as working.
The following snippet of config works, but I still think it should work without the tkip "hack".
dot11 ssid whatever
vlan 1
band-select
authentication open
authentication key-management wpa version 2
interface Dot11Radio0
encryption vlan 1 mode ciphers aes-ccm tkip -
Can't connect AE to existing wireless network
I can't get my AE to connect to my existing wireless network. I saw the other thread on this and followed those steps, but it didn't work. Here's what I did:
1. Connected the AE to my D-Link DIR-655 wireless router via ethernet cable.
2. Opened Airport Utility and established a connection to the AE.
3. Renamed the AE and entered a password.
4. In the "wireless" tab, I selected "join existing network", chose my wireless network, selected the security type (WPA Personal) and entered the password.
5. In the "music" tab, I named the speakers and entered a password.
So far so good. I clicked "update" and the AE restarted. After a while I received an error message informing me that the base station could no longer be detected. According to the directions posted in the other thread, this is actually supposed to be a sign that the AE is now in client mode and all is well.
I unplugged the ethernet cable from the AE and router and then went to the other room. I plugged the AE into the speakers and then plugged the AE into the wall.
However, instead of a green light all I have is a flashing amber light, even after several minutes. No connection.
I reset the AE and repeated the steps above, to no avail. Still a flashing amber light.
Any ideas?I'm having a similar issue. My AE is connected directly to a Netgear WGR614v4 router, and I run through all the steps you mentioned. When I choose to update the settings to the AE, I get the same "error" you mentioned about the AE not being found, and I also took that as a sign that I'm in client mode. I moved the AE to the other room, connected my mini cable to the stereo, then plugged the AE back into the wall. The AE runs through its setup and eventually gets a solid green light, so I'm thinking all is well.
The problem is that I then log back into the AirPort Utility on my laptop and the AE is not shown in the top left like it should be. After doing a bit of reading, I've figured out that I can manually find it by going to File>Configure Other and entering the AE's IP address and password. Then I get a window showing the details of the AE, its name, network, encryption, etc. However, if I close this window, it still doesn't show up in the main AirPort Utility screen and I'm not sure how to configure it for AirTunes.
Hoping that's just a bug with the AirPort Utility software, I open up iTunes to see if I can locate it there. I know I should see a pulldown menu at the bottom of iTunes that gives me an option for AE as my audio output method, but the menu is not there. Now I'm completely stuck.
At this point I decide to start from scratch, so I do a Factory Default reset by pressing down the reset button on the AE as I plug it into the wall. Now it is supposedly reset, so I plug it back into my router, then it runs through a setup sequence and lights up solid green before I've even done anything. It shows up in AirPort Utility with a default base station ID, but my computer won't connect to it at all. I'm hoping I can try to reset it again this evening and at least get back to the normal setup screen, but I'm really not sure what I could do differently at this point.
This is frustrating and I'm on the verge of giving up, but I REALLY want this to work out. -
I currently have a WPN824 v3 Netgear router and I’m trying to set up my Apple TV. I am able to connect it to my wireless network but my airplay feature is currently not working. The icon does not appear on any of my devices. My ipad and ipones all are currently up to date and are all joined to the same network. Is it the way that my router is configured. Please help let me know what I need to change in my router settings or does my router not work with Airplay. Or is there a simple fix.
you don't mention which products you use
only ipad2 and up support mirror
and only iphone4s and up support mirror
other devices only use airplay for apps which support tvout options
Maybe you are looking for
-
[trash] installer can't detect drive
I've got a compact flash/IDE adapter, and wanted to install archlinux in that CF. Unfortunately the bios of my old laptop won't recognize the adapter. No biggie, I can always put grub on a usb drive, right? The real problem is that the archlinux inst
-
Critical Action and Role/Profile Analysis
Hi, I want to know the purpose of the Batch Risk Analysis back ground job "Critical Action and Role/Profile Analysis" in RAR 5.3. I'm assuming that I need not run this job if I do not want the critical roles/profiles like SAP_ALL to be analysed which
-
RS480M2-IL: Drives do not power up if PATA cables are connected
I am building a system around a the RS480M2-IL and I'm having a bizzare problem. When I plug the hard drive and DVD into the power supply and turn the system on without connecting the ATA133 connectors, the drives power up. If I connect the drives
-
How does one edit his/her signature block?
''Duplicate post, continue here - [https://support.mozilla.com/en-US/questions/844372]'' I have had a change of address and wanted to know how to change the signature block
-
Updates installation stuck on 0%
Hi, I have problem with patching few servers in DMZ. I have deployed SUG and at beginning of update process, it looks fine - all necessary updates are visible in Software Center. But... next all updates stuck on 0% and stay in that state few hours. A