HP Deskjet 3050A wireless printing problem with Macbook Air

Hello, I have a HP Deskjet 3050A printer that I have been using with my MacBook Air (2012 OS X 10.8.3) until a few weeks ago when it seemed to hang when trying to print and then say no printer found (even though it showed and was selected in the Printer options). So after a few weeks of this I decided to to remedy this issue once and for all by deleting the printer and 'refinding' it.
However, upon 'refinding' printer by adding it through System Preferences no printer is found - I have updated all Macbook air software.
All this time I have been able to continue printing wirelessly using my iPhone 4S and have changed no settings to the iPhone or 3050A which leads me to believe the proble the problem may lie with the Macbook Air?
Can you help resolving this please? Thanks

What router are you using? Have you restarted it by pulling its power plug momentarily?
If that does not work, download and install this: http://support.apple.com/kb/DL907
Restart your Mac.
Finally, reset the printing system:
- Go to System Preferences > Print & Scan
- Right (or control) click in the rectangle listing your printers and select Reset Printing System.
WARNING - this will delete ALL of your printers!
- Select the plus sign to re-add a printer. Select the Defualt tab on the top of the window. Look for the printer, select it and then next to the "Use" pulldown, select the printer model (not AirPrint). Wait until the "Add" button becomes available. Click it.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Similar Messages

HP Wireless Printing - problems with MAcbook Airport

I've read through most of the problems related to printers on here and I think I have a unique one!!
I've just bought and installed a HP C8180 all-in-one printer. Installed as per instructions - on home network and across ethernet. I've reserved an IP address for it so its always in the same place. Works brilliantly (good printer!). However if I then disconnect ethernet and connect to my network via airport - it won't print! It will however, align, print test page (albeit slowly), clean cartridges etc - but no printing.
If I disconnect from Airport and reconnect to ethernet - no problems it prints fine. If I then connect via airport (keeping the ethernet connection at the top of the list) it works fine. If however airport is top of the list - it won't print.
Prints fine on USB too.
So I've deduced that for some reason its the Apple Macbook wireless that's causing the problem.
So does anyone have a solution - 'cause this is driving me nuts!
Thanks in advance.

I have a HP Photosmart 2710 All in One connected to a Aiport Express USB port, it works great, the WIFI in the printer doesn't work because it doesn't support WPA2 so I disabled it. The main router is quite a ways away but I still want to print to the printer wirelessly.
My suggestion:
1. Connect the printer via USB directly to macbook to load and test driver.
2. Use Airport Utility and configure Airport for printer, if it is already listed, remove and reinstall it.
3. On your Macbook it should change the driver from USB to the name of Airport, sometimes it helps to turn off the printer and turn it back on while connected to Airport.
Keep messing with it, it can be stubborn with Bonjour but it finally shows up. Make sure the Airport Utility can see the printer when connected to it.

Wireless printing - problem with MAC integration

Hi everybody.
Just bought a Macbook pro and cannot get it to recognize my printer.
Devices within network:
- Belkin WLAN Router
- HP Laserjet CM1312 multifunctional printer - with HP 2101nw wireless G (printing and even scanning works fine wireless!)
- Acer Notebook with XP Home (used to set up the 2101 wireless)
- Acer Netbook with XP Home (added later to network, no problem with printing, setup took 5 min)
Antivirus software: Avira Premium Security Suite on both XP's
WPA-PSK encryption, no mac filtering.
The Macbook can access internet, but nothing happens when I try to print. I wanted to stop the hassle that Windows is causing occasionally. Frustrating experience with the Mac so far.
Can anybody help?
This question was solved.
View Solution.

I have removed the printer, and added again - a couple of times. I was not sure what protocol to chose (LPD, IPP, Socket).
I took your advice and tried, but with the right click (ctrl pressed), nothing happens. The normal window for the print queue opens, and I cannot select anything like "Reset Printing System".
This does not work either, no Printer with "Bonjour" is offered for selection:
"Select the plus sign to re-add it. Look for the printer with Bonjour next to it, select it and wait until the "Add" button becomes available. Click it."
When I select the plus sign, I can only make settings in the "IP" area. Standard, Fax and Windows have nothing to select or to put in. "IP" offers Protocol to select and Address to fill in. I put in 192.168.2.6 and tried the different protocols. "Print with" offers generic PostScript printer, Generic PCL Laser printer, "other" and printer software - thats where I selected the driver for the cm1312
Can you tell what I did wrong? Thanks for trying

Wireless printing problems with 10.5.4 and Epson printers

Anyone else know about problems with Epson printers such as this no longer functioning wirelessly with bonjour once upgrade to 10.5.4? It appears they are not supporting this with a new driver yet?
At this time, Epson says they have no drivers for 10.5 and this specific printer but wondered if there are more general problems with 10.5.4 and bonjour with Epson or others?
Thanks
Paul
MacBook Pro Mac OS X (10.5.4) Using Epson CX11-NF printer

I have 5 computers-G4 PowerPC, two G4 12" laptops, G5 Mac Pro dual, Macbook Pro--with the older computers all running 10.4.11, the new ones 10.5.4. Until Friday, I was able to print with all of them to an Epson Stylus Photo R200 via Airport Extreme. After installing software for my new G3 iPhone on the G5 Mac Pro the printer connections on all the computers stopped working. I have so far been able to get the G4 Power PC to print, but none of the others. I have tried Bonjour, Gimp-print v.5.0.0-beta 2, cleared all the print drivers and restarted, and everything else I have been able to find on both Epson and Apple sites. The Printer Set Utility described by Epson does not exist in Leopard machines, and doesn't work for the older laptops. As soon as I select one of the printers in the "selected printer in print dialogue box" it grays out. I have set up sharing on the G4Power PC that does print, but it is not accessible--it shows up but is grayed out. There is a diamond next to the printers in the Print dialogue box in applications' menus, but it still doesn't work. It either cannot make the connection, cannot find the printer, or keeps spinning with the message that it is finishing printing (but it hasn't even started.) Again, everything worked fine until the new iPhone was added to the mix. My old iPhone didn't cause any problems. This is really a problem. Any suggestions welcome.

Wireless printing problems with Canon iP4300, but USB printing ok

My MacBook Pro is setup for wireless printing with a printer(Canon Pixma iP4300) connected to my other PC Desktop. The only problem is that when I print anything all the text and images are miniaturized and squished about a quarter of a page large into the upper left corner of an 8.5x11 paper. I installed all the programs that came with the printer installation disk and when I connect my MacBook directly to the printer via USB everything prints out just fine.
I suspect the problem is with the selection of printer model when you go to "Printer Setup" in System Preferences. The existing list of Canon printer models given to me by the computer does not contain anything specific for my iP4300. I simply chose the option "BJC 4300 Gimp-Print v.5.0.0-beta 2". Does anyone know of a way where I could add to that list of printer models or is there another way to get my wireless printing to work normally? Thanks to anyone who can help.

I have the same printer and network printing is a pain. Canon decided not to include a network specific driver for this printer.
You can try getting the latest version of the gimp-print drivers. The latest version has better support for ip4300. If it's worth it to you, PrintFab drivers have been working for me but PrintFab isn't free.
The latest Gimp-print (Gutenprint) drivers are here: http://gimp-print.sourceforge.net/MacOSX.php3
Hope that helps.

Wireless printing problem with HP Envy all-in-one 110 when running Mac OS 10.7

I just bought the HP Envy all-in-one 110. I have a Macbook Air running IS 10.7. I managed to install the software correctly and the wirless network light is showing on the printer. I ran a test page from the printer and all the settings say they are "enabled." But I still can't get the printer to print over the wireless network. When I plugged in a USB cable, I managed to get it to print. I have a wireless router running over the Sonic.net DSL network. Network strength is good. I've switched off and restarted all equipment several times but still no results. Help!

Hi,
I believe the router may not support Multicasting, a network protocol used for Apple's Bonjour service to operate as it should.
Will be helpful to know the exact router brand and model.
As a workaroung, you may try setting the printer by using standard IP, it should allow you to print, however the router issue (more likely) have to be handled first to allow the full software functionality including scanning.
Follow the steps below to set an IP print queue, it will also help to better understand the cause for the problem:
Enter System Preferences > Print & Scan.
Click the plus sign.
Click the IP icon.
Select the HP Jetdirect Socket protocol.
Enter the printer IP address into the Address field
Now try printing using the newly created print queue, listed as the printer IP address.
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Wireless printing problem with hp officejet 100 mobile printer from win 7 dell laptop

My hp officejet 100 mobile printer was working fine with my dell XPS 15 in bluetooth wirelessly until my laptop crashed. Now I can not get it to print internet info except with hard wire connection. Page loads half way and then stops. Must shut down laptop and shut off printer or hard wire and shut off bluetooth. down loaded lastest drivers to no avail. printer will print from cell phone and win 8 computer via bluetooth but not win 7 laptop.

Sorry you are having problems with printing from the internet. I have a few more questions to ask you before I can be of much assistance.
What web-browser are you using?
Do you have any problems printing from Word or other non-internet documents?
What did you do to fix your computer (system restore, clean install of the OS, etc)?
Have you tried an alternate web-browser?
Make sure to install all of your Microsoft updates to see if that helps. Otherwise, answer those questions for me please and I will be happy to help.
Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
When a solution is found please mark the post that solves your issue.
Every problem has a solution!

Problem with MacBook Air connecting to Epson Stylus sx600fw wirelessly

Hi
I have been trying to set up my new Macbook Air with Epson Stylus sx600fw. Previously this printer was being used via USB with a PC. I have set up the printer on macbook via USB, but under the advice of online resources, erased that and began trying to set it up for wifi use. The printer cannot be found in the Print & Scan section of settings, and when i enter it in manually with IP address, it can find the software to install but gets stuck and says "Unable to verify the printer on your network". After further research i have tried to Ping the printer, which does not work. One thing that i notice is that the Subnet Mask is different than the apple default...for the printer it is 255.255.0.0, where for apple it is 255.255.255.0 but i dont know how to change this
Any advice for where it might be getting stuck or what I can do?
thanks!!!

Welcome to the forums @lesleglreglpegl ,
I have a few suggestions for you that might help with the connection problem you're having with connecting your OJ J4680 to your Mac.
Here are the steps:
Mac OS X: How to reset the printing system
Repair disk permissions
Restart the Mac
Re-add the printer (do not use the AirPrint driver)
Good luck to you, have a great Monday
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Wireless printing problems with Asus router RT-N56U and HP8500

Neew MacBookPro with Lion. Also have HP 8500a 909a printer hooked up to an Asus router RT-N56U Google search indicates MANY problems with HP printers being used with wireless Mac, even with Airport. Of course we know HP is one of the worse customer support companies on earth,, so I came here in hopes to find a solution. I updated my mac and firmware for router. The Mac doesn't find any printers wirelessly at all. If I hook up with a cable it works fine.. Thanks

I own the RT-N56U (best router on the market hands-down), along with an HP LaserJet 1320, however it's connected via USB to my computer instead of the router. While it's true that HP don't have a terrific support record for Mac drivers in fairness it may be the Asus router causing the problem; if you Google "Asus RT-N56U" and "mac os x print server", you'll find complaints similar to yours from other users. From what I understand this is partly dependent on your printer and whether it supports network printing, and partly on compliance with the Asus router firmware. I Googled what appears to be a possible solution to configuring the Asus print server, however I haven't yet tested this myself:
http://forums.techarena.in/networking-security/1424669.htm#post5384770

Problem With Macbook Air 5,1 Graphic Card Driver For Windows 7 - 64 bit

Hello everyone,
I have a macbook air 5,1 , ver 2012-2013
I Installed Windows 7 64bits Ultimate on my macbook, and i downloaded the latest boot camp and i installed it too!
After finish Installing Boot Camp, everything looks fine until it finshes and then i restarted my mac,
Then i found out that my Graphic Card is not working!!,
I Reformated the System 10 times and i tried diffirent versions for example (32 bits) and (home premium) - (Enterprise)
And Still the problem is the same..
It is working perfectly with MAC OSX but on windows it doesn't
I Searched a lot for drivers for intel hd 4000 in intel's website and i downloaded it, but the system is failing when i tried to install a driver from out side boot camp
so i reformat it!,
and now i am working on it without graphic card
Please help!!? any suggestion i would be thankfull <3

Thanks for sharing your tip RatioCynic! That's what this forum is all about!
Happy printing!
Thanks!
Tara
**Although I am an HP employee, I am speaking for myself and not for HP.

Deskjet F370 All-in-one with MacBook Air OS X 10.10

Hi Helpers.
My new MacBook Air with OS X 10.10 Yosemite causes all of the lights on my printer to flash and allows no printing. What should I do, other than add to the Scrap Mountain and buy a new printer? My printer is Deskjet F370 All-in-one.
Thanks in anticipation.
De13

Hi @De13
I am not entirely sure what is causing the lights on your Deskjet F370 to blink, but I do have a a few troubleshooting steps we can try.
Let's reset the printing system, repair disk permissions, re-add the printer using the right driver, and try to scan again.
Reset Printing System
Click the Apple icon (   ), and then click System Preferences.
In the Hardware section, click Print & Fax/Scan. The Print & Fax/Scan dialog box opens.
Right-click (or  Ctrl  +click) in the left panel, and then click Reset printing system…
Click OK to confirm the reset.
Type the correct Name and Password.
Click OK to reset the printing system. The Print & Fax dialog box shows no printer selected
Note: This will remove all printers in the print and Fax/Scan, any printer removed can be re-added later by clicking the plus (+) symbol.
Repair Disk Permissions
On the Dock, click Applications, and then click Utilities.
Double-click Disk Utility.
Highlight your hard drive/partition on the left (by default this is "Macintosh HD").
Click the Repair Disk Permissions button at the bottom of the window.
Once the repair is complete, restart the computer and add the printer back.
Download and install the HP Printer Drivers for OS X.
When you add the printer, please ensure you are using the HP driver.
Select Add other Printer or Scanner
Select the printer you are adding and next to 'Use' you can select the printer driver
I look forward to hearing from you.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Bluetooth Connection Problems With MacBook Air

I recently purchased a bluetooth speaker with plans to use it for both my computer and my iPod Touch 5. I had no problems connecting the speaker to my iPod, but for some reason my MacBook Air will not pick up the signal from the speaker.
Does anyone have any tips or suggestions on how to fix this problem?

Thank you Linc,
I have tried disconnecting my iPod from it, but am still having trouble connecting my MacBook to the speaker.
Do you have anymore suggestions?

ISight problems with MacBook Air on Mavericks

Since I upgrade to Mavericks, my iSight camera stop working. System just don't recognize the camera. Any ideas?
I have a Mid 2011 11" MacBook Air.
Thanks,
JHR

http://support.apple.com/kb/ht2090

Canon ip5200r wireless printing problems with Airport Extreme

I have been been printing from my iBook G4 (OS 10.3.9) using my Canon ip5200r connected to my wireless network for a couple of months without any problems. Yesterday it stopped working. When I called Canon for support, they say the problem is that my Airport Extreme is assigning different IP addresses to my computer and printer despite both being on the same network. I am not sure if it is relevant but the only recent change in my system is that earlier this week, I had a new high-speed internet modem installed. Can anyone help with this?
Thanks!

Attached to the airport USB port I have
an unpowered hub with both a 500G disc and an HP deskjet 940c printer.
Why is that? power power power try it see what happens.

Printing problem with Macbook, Airport Express and new Canon IP4600

Just set up new printer, a Canon ip4600. Adding printer in System Preferences to my flat-screen iMac, I got it working using the Airport Express. But trying the same thing with the Macbook (2.4 GHz Intel), can't get it to print. (Both worked fine with previous Epson printer.) I fear it's a network issue, not sure what to do. Any suggestions will be appreciated.

For each of the AirPort Express Base Stations (AX), did you also change the "iTunes Speaker Name" on the Music tab when using the AirPort Admin Utility? Is this the name you're referring to from iTunes?

HP Deskjet 3050A wireless printing problem with Macbook Air

Similar Messages

Maybe you are looking for