HP Deskjet 3070A Replaced the cartridges and still not printing

My printer says i need to use the Set UP cartridges that came with my printer that is impossible as my printer is 20 months old. I had no problems with any kind of printing e-print etc. until now I had to replace my cartridges. I purchased HP364 and i have tried and cleaned my printer but it well not print. Sometimes it tells me Magenta is in compatible 2 days later it say Cyan was incompatible.  Please can you help
This question was solved.
View Solution.

@DJBell 
I'm going to reply to the private msg you sent me on this.
Ciara
Although I am an HP employee, I am speaking for myself and not for HP.
Twitter: @Ciara_B_HP

Similar Messages

  • My printer isn't printing. i replaced cartridges, and still not printing.

    We were trying to make a copy and kept getting blank pages. I replaced the black, blue, and magenta cartridges. I still can't get black to print though. I can get a little of magenta and blue to print. I tried printing an email and got some of those colors, but if I try to make a copy, I get nothing but blank paper.

    hi there 333crown,
    could you provide the community with a little more information to narrow troubleshooting? Things like your operating system and the printer model usually help considerably. 
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • My large monitor is not showing the screen of my MAC airbook on it. All cables are hooked up. I reset the pram  and still not working. Message on black monitor says"check signal cable...?

    My large monitor is not showing the screen of my MAC airbook on it. All cables are hooked up. I reset the pram per the instructions I received at the MAC store and the monitor is still not working. Message on blacked out monitor says"check signal cable". All cables are attached and monitor and MAC are both plugged into power source...Help ?

    Go to System Preferences, Display. Click on dectect displays.

  • Im getting errors when i do a mem test on my hp a6000f.....ive replaced the ram and still get errors

    im getting errors on mem test, Ive replaced the ram, still get errors. How do I disable the L2 cache....on hp a6000f, I dont see anywhere to do it while im in the BIOS/ CMOS setup
      I get error code : BIOME-1

    Here is what you should do to trouble shoot your problem.
    Open up the composition that is giving you problems
    Your error message tells you that you are having problems with the Shatter effect so select the layer with the shatter effect and turn the effect off
    Try a ram preview
    If the ram preview is successful add a solid to your comp
    Copy your shatter effect and paste it to the new solid you created
    Turn off all other layers
    Try a ram preview
    If the ram preview crashes go back to step 6 and reset shatter and try again
    If the ram preview is successful start adding the properties from your original shatter effect until you get a crash.
    If the ram preview works the first time you try step 6 then there is something wrong with the combination of shatter and the original layer it was applied to so remove shatter from that layer, pre-compose that layer moving all attributes to the new layer then paste the working shatter from the solid to the pre-comp, turn off the solid and try another ram preview.
    Do you kind of get the procedure here. When something is causing a crash first isolate that problem, try it on something simple, then try different things until you can reproduce the crash. Make sure you are saving copies of your project so you can easily go back.
    If you can't figure out what settings in Shatter are causing the crash then we need to know everything there is to know about your composition and see a screenshot or the project file. If it is the footage that is causing the crash then you need to transcode, recompress, or in some other way change the format of the footage. There is nothing we can surmise from the details you have given us that give us any clue why shatter is crashing. It usually does not. I can't think of the last time it caused a crash for me. The only possible thing I can think of that would be causing a crash is that the number of particles is causing your system to run out of memory.

  • Brand new ink cartridges, cleaned, still not printing

    Recurring problem on this printer, nothing helps.  Brand new ink cartridges, cleaned the inkheads twice, read though solutions for de-clogging the vents.  Able to print documents fine this morning, now---nothing.  Black ink not printing.  Frustrating, this is a recurring problem and am tired of going through more ink.  Ran alignment, just says "alignment failed" but no solutions offered/no troubleshooting given.  Suggestions?

    Hi @OL5,
    Welcome to the HP Forums!
    I see that your HP Photosmart is not printing black. I am sorry to hear this, but happy to help!
    For further assistance, I will need to know:
    The Product/Model Number of your printer. Follow instructions in this link. Finding Your HP Product Model Number.
    If the printer is connected, Wireless, or USB.
    If the power cable is plugged into a surge protector, or directly to the wall outlet. Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector. This applies to Inkjet printers as well. 
    If you are using genuine HP ink cartridges, or refills.
    Once I know this information, I will be happy to do some further research for you.
    Thank you for posting!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • I received a low ink warning on my mac for my epson artisan 837 printer. I replaced the cartridge that was low but it still reads low ink on the mac but reads full on the epson control panel. I am also receiving a communication error between the mac

    I received a low ink warning on my mac for my epson artisan 837 printer. I replaced the cartridge that was low but it still reads low ink on the mac but reads full on the epson control panel. I am also receiving a communication error between the mac

    What exactly is the error?
    And, we'd need some info re. your Mac model and OS version - you are not running iOS on it.
    You need to realize that this model has been discontinued and the last driver updates are dated about a year ago. If you are running Mavericks, there may not be an updated driver for it. But you can try to delete the printer and add it again to see if that will work.

  • My computer has been seen at Genius bar 6 times for freezing up, reloaded all original settings and even went to the apple shop where they replaced the battery and logic board. Still freezes after I try to reload iTunes stuff and app stuff from apple

    my computer has been seen at Genius bar 6 times for freezing up, reloaded all original settings, all of their diagnostics, and they even sent it to the apple shop where they replaced the battery and logic board. Still freezes after I try to reload iTunes stuff and app stuff from apple, especially iPhoto which is seems to refuse to load and then begins freezing up all over again. Anyone else have this problem. Other than this, I have had absolutely no problems with this computer. Now, it's a file of junk.

    Hi Ronald ...
    Have you checked lately to see how much free space there is on the disk? Especially since iPhoto freezes at launch ...
    Click your Apple menu icon top left in your screen. From the drop down menu click About This Mac > More Info > Storage
    Make sure there's at least 15% free disk space.
    And make sure the OS X software is up to date.
    Click the Apple  top left in your screen.
    From the drop down menu click:   Software Update
    If you have anti virus software installed or are using third party Mac cleaning utiliites, that may be part and parcel of the your problems.

  • My apple tv keeps losing internet connection. I'm going from modem to airport and from airport to apple tv. I've replaced the modem and the apple tv and it still does it. Internet to my laptop via the airport wifi is fine and never drops out.

    I keep having to restart it every time I want to use it. Sometimes I have to restart it multiple times. The cord goes from the cable modem to the airport and then from the airport to the apple tv. I've replaced the apple TV and I've replaced the modem and the problem persists. I assume it has to be the aiport? But the wifi from the airport works fine.
    I tried bypassing the airport and going straight from the modem to the apple tv and it wouldn't work. That makes no sense to me.
    I had a friend over to try and figure it out and he couldn't. Any idea what could be the problem??

    The Ethernet cable from the modem should be connected to the AirPort's WAN (circle of dots) port and a second Ethernet cable should be connected between the AirPort's LAN (opposing arrows) port and the Ethernet port on the Apple TV. Is this the case?
    If so, what is the make & model of the modem that the AirPort is connected to. Also what is the exact model of both the AirPort and the Apple TV?

  • Replaced ink cartridges and no ink shown on new print outs

    I have a HP 8500 a9110 printer. I just replaced all three color ink cartridges (black cartridge is still good). After replacing, I tried to print and all that comes out are white print outs with no color or very slight tone. I attempted to go Tools and clean and align heads. The clean worked but received failure on align option. I turned off and unplugged unit and also removed and put back in new ink cartridges. I also removed the both heads and cleaned off with soft cloth. Has anyone experienced this issue before. Any assistance is appreciated.
    This question was solved.
    View Solution.

    Hi vegasbuddha,
    Sorry to hear that you're having problems.
    Are you using HP genuine cartridges? I'm asking because using any other cartridges could result in many hardware
    problems and issues also in ruining the printer.
    If that's not the problem, can you take a look at this link and see if you've missed any steps in replacing the cartridge?
    Replace Print Cartridge
    After replacing any cartridge, the printer should automatically print out a diagnostics page.
    Also, cleaing the cartridges could help in this case. The instructions to do so are in this link:
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c02207121&lc=en&product=4083969&tmp...
    Let me know how this goes and hope this helps! 
    **Click the KUDOS star on the left to say 'Thanks'**
    Please mark a reply "ACCEPTED AS SOLUTION" if it solved your problem, so others can find it.
    I work for HP, supporting the HP Experts who volunteer their time and technical knowledge to help others.

  • PhotoSmart 8450 aligning the cartridges and color matchingr problems

    I have problems with aligning the cartridges and color matching on my PhotoSmart 8450 printer.
    Aligning the cartridges
    I just replaced a cartridge on my PhotoSmart 8450 printer. I always use the original Vivera cartridges.
    After replacing the 343 tricolor cartridge, the 100 gray cartridge suddenly gave smudge results.
    I did a lot of Clean cartridges and Align cartridges before getting acceptable results.
    The clean cartridges printout still gives small imperfections in the top grids.
    Color matching
    Most of the time I print on plain paper. Ocasionally I try to print photographs.
    In fact my PhotoSmart 8450 never really printed photographs in the right colors.
    Always too much blue and too little red... To solve this I decided to use ColorMunki Photo.
    But on the Colormunki test print some of the colors are smudgy.
    The settings are Paper type (HP Premium Plus Glossy), Quality (Best: 600dpi, PhotoREt), Real Life Photography (everything off), Color Management (I tried ColorSmart/sRGB or Managed by Application).
    The result is stripes and or smudgy appearance in some of the colors.
    Doing the same on plain paper (Standard or Best;  ColorSmart/sRGB) gives good results.
    What can I do to solve both problems?
    Thanks for helping.

    Hi,
    It looks as if you have done a lot of troubleshooting already, however it maybe that the cartridge is displaying minor color mix which should be apparent if you try to follow procedure in this support link, the stripes or small imperfections you have mentioned may be linked to partially missing color or colors which could also contribute to the appearance of photographs printing in the right colors.
    Hopefully this will give some assistance in resolving the issue.
    Thanks
    Neil
    Although I am an HP employee, I am speaking for myself and not for HP

  • My IMAC screen went to sleep and I have it set to enter a password upon waking it up. However, my bluetooth keyboard died while it was asleep and I replaced the batteries and tried to enter my password and it is not picking up my keyboard. What can I do?

    My IMAC screen went to sleep and I have it set to enter a password upon waking it up. However, my bluetooth keyboard died while it was asleep and I replaced the batteries and tried to enter my password and it is not picking up my keyboard. What can I do? I will not let me enter my password to get in and trouble shoot the keyboard. Please Help!!

    I pushed in the button on the top right corner. It turns a green light on and then it goes off. I held it in until it started blinking. It blinks for a bit and then the green light turns off. I am still not able to type my password. What should I do now?

  • My printer will not print in black ,i replaced the ink and now it will not print in black ink

    my printer will not print in black ,i replaced the ink and now it will not print in black ink

    Please read this post then provide some details.  What printer model? What operating system? Are there any error messages on the printer or computer screen?
    Is your printer still in warranty? You can check with HP's warranty tool here.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • HELP please! :) My ipod gets like lock, everything appear with lines, I already restore like three times the ipod and still happens the same, what can I do? and on some app store they just told me that restore, but well I do and is the same!

    My ipod gets like lock, everything appear with lines, I already restore like three times the ipod and still happens the same, what can I do? and on some app store they just told me that restore, but well I do and is the same! What can I do?? and is new, I buy it on march!
    This is a image of the ipod already restore, and everytime looks like that!

    If restoring the iPod to factory defaults/new iPod dow not solve the problem you likely have a hardware problem.  In that case either make an appointment at the Genius Bar of an Apple store or call AppleCare.  If defective, Apple will replace your iPod at no cost.

  • Jst got a iphone 4s and my itunes is not picking it up at all i have tried many things from the internet but still not working

    Please help ... Stressed new iphone user!!!!!!!!!! lol.
    i got a new iphone 4s on friday, people told me i needed to connect this to the itunes asap.
    i have had a ipod for 4 years and had no problem connecting to itunes before.
    at first my computer would not find the iphone so i looked up tips from apple and other internet sources ... after deleting temp files my computer picked up my iphone but itunes didnt... i kept getting a pop up when going on to itunes saying "this iphone cannot be used because the required software is not installed. Run the itunes installer to remove itunes, then install itunes again.
    So i did i did this serveral times and the pop still keeps coming up and everytime i reinstall itunes i have to delete temp files for my computer to pick my iphone up. i contacted apple and an adviser sent me a link to follow to delete itunes and other in a order which i did several times and still not worked.
    i tried my iphone on my mums computer and it has picked it up but in my mums itunes i want my itunes as i have purchased many songs. now my ipod wont even register to itunes. i also get a pop up from windows saying Host process for windows services stopped working and was closed ... i ahve followed all the advice for that even a clear up on my computer and still nothing. you can even find apple mobile device anywhere on the computer tho my mobile is charging when plugged in. i have tried everything that apple reccomends anyone able to help
    Thank you

    Try this article if you haven't already
    This is the only possibility that came to my mind when reading about your issue:
    "If an iPhone, iPad, or iPod touch is not recognized in iTunes on Windows, the Apple Mobile Device Service (AMDS) may need to be restarted"

  • I used to be able to close the browser and still have the download box open and still download stuff but now I can't...what happened???!!!

    I was in the process of downloading something tonight and decided to close my browser. Unfortunately, the download window also closed and that meant my download was gone and I would have to start over again.
    I went back and started the download again and the download box showed the file picked up where it left off but when I closed the browser the same thing happened again; the download box closed when I closed the browser.
    The reason I close the browser is because my downloads download faster when the browser is closed and now that option is closed to me.
    Is this a new feature if so I don't like it as a matter of fact I would say I'm very pissed off with this new development. Please go back to fixing it so I can close the browser and still download.

    Hi cor-el:
    Thanks for responding to my post.
    I went to about:config like you suggest and changed the the thing you said. There is no improvement. Instead of my browser and the download box closing when I click on exit button/link now a box pops up with the message "If you exit now, 1 download will be canceled. Are you sure you want to exit?
    I don't need a box to warn me that if I exit that the downloads manager would close as well...I already know that and that's the problem. I want a way to stop the download manager box from closing when I exit the browser like it used to.
    Thanks anyway.

Maybe you are looking for