HP Deskjet 3070A setup cartridge problems.

I was having problems with wireless working on my 'HP Deskjet 3070A All-in-one printer' and after trying different solutions I had found on HP support, I decided to give up and factory reset it.
This gave me a new problem, the printer now needs setup cartridges to, well, set it up. I did keep them after they ran out so tried using them again for setup, but they did not work as they have already been used. Is there any way I would be able to obtain new ones?
This question was solved.
View Solution.

how do i bypass setup cartrige problem
hp deksjet 3070a sn. CN19A370TP
during that time my cartrige has ink, now i want to print 21 pages, after second pages printer stop, i dont kow what happen, i check my pc if hang but pc not hang, im check printer is not moving, so i search webpage to fix my problem, im back to print again, not working, so i decide to reset factory setting, the problem appear "Setup Cartridge...", that is means my ink cartridge is "empty", how it was empty i print the first page then second page hang. HOW DO I BYPASS SETUP or HOW DO I RESET INK COUNTER, check my serial number is still under warranty, if you can not give me instruction HP is the worst brand of all
BYPASS SETUP CARTRIDGE >>>>>>>>>>>
RESET COUNTER >>>>>>>>>>>>>>>>>>
thank you very much, waitin your reply HP engineer not HP employee

Similar Messages

  • Re: Deskjet 3070A - replaced cartridges but won't print now!

    Hello,
    I have the same problem. Replaced my black cartridge on my deskjet 3070A and now it won't print any black ink at all.
    Please can you help?
    Thanks,
    Tom

    @Tskinner1 
    Hi Tom, is the printer in warranty? (typically it's one year from purchase). Can I ask which country are you based in?
    Troubleshooting steps
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c04030353
    Thanks, Ciara
    Although I am an HP employee, I am speaking for myself and not for HP.
    Twitter: @Ciara_B_HP

  • Deskjet 3070a - Deskjet 3070A - replaced cartridges but now it stopped printing black

    Hi,
    I just replaced all my cartridges but the black colour is gone - I even tried to replace the black cartridge but it did not solve the issue.
    The printer is out of warranty but I spend a lot of money on new ink so I would appriciate to receive advice on how to solve this issue.

    The document here may help black not printing on your Deskjet 3070a.  Be sure to check the vents as shown in solution three.
    How far out of warranty? You can check with HP's warranty tool here.  What country are you located in?
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • 3070A setup cartridge message

    Hi I have had a 3070A all in one for a year or so (it is out of warranty). I have just replaced the cartridges, we must have used about 10 sets over the time we have had the printer. The cartridges are genuine HP, although we have used other brands one or twice.
    Suddenly I am getting the message "use SETUP cartridges for initialisation" and it won't print or copy.
    I have tried unplugging the mains and rebooting it to no avail. I have long since lost the setup cartidges.
    Is there any way around this?
    Any help very much appreciated -  I need to print some tickets out urgently!!!
    Thanks

    Thank you for this information.
    Since none of these steps worked, I would recommend contact HP technical support for further assistance. Click here to find out: HP Worldwide Contact.
    I worked on behalf of HP.

  • HP deskjet 3520 ink cartridge problem...​Can anyone suggest another make of printer that is not HP?

    Hello...I have yet to receive an answer that resolves the problem. I regret buying the printer because now it doesn't work. The error message remains despite taking advice how to fix it. 
    We only use the black cartridge.
    Can anyone suggest another make of printer that is not HP?
    Thanks in advance. I am in the UK and need to print urgently.
    This question was solved.
    View Solution.

    Hello...problem resolved...many thanks.

  • Deskjet 3070A - replaced cartridges but won't print now!

    Ciara 
    Can you please send me info on how to fix this issue?
    Thanks 
    D
    This question was solved.
    View Solution.

    Hi loxluta,
    I was just wondering if the steps @Ciara_B were able to help you get the issue resolved.
    If not maybe I can help, just let me know here or in a private message
    Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    **MissTeriLynn**
    I work on behalf of HP

  • Setup black cartridge/ HP deskjet 3070A

    Hello,
    I do not have the setup cartridge from black anymore, but when I wanted to change the color setup cartridge with new ones. The printer keeps on asking to put in all the setup cartridges.
    I also have reinstalled the software, but it keeps on asking for all the setup cartridges.
    Again I try: and it keeps on asking
    Use SETUP cartridges: Yellow. Use the SETUP cartridges that came with your printer for printer initialization. 
    Use SETUP cartridges: Black. Use the SETUP cartridges that came with your printer for printer initialization.
    What do I need to do?
    Kind regards,
    Madyjane

    Hi 
    I'm going to private message you on this
    Thanks
    Ciara
    Although I am an HP employee, I am speaking for myself and not for HP.
    Twitter: @Ciara_B_HP

  • Deskjet 3070a use setup cartridges error

    Hi I am having th same error message asking me to use the setup cartridges, i have no idea why I have changed the cartridges several times and to my knowlidge the power has not been removed from the printer, I have managed to find three of the original setup cartridges but not he black as no doubt that has been changed most often and was disposed of.
    this seems to be a very poor system, it looks as if I shall have to buy another printer which is a shame as this one has worked faultlessly for some time now, it is well out of warenty. Please help sombody,
    regards Mike

    Hi @Mikepaget, 
    I understand that you are getting the message to "use the setup cartridges". You have already had several cartridges installed, so the setup cartridges wouldn't be required. I can help you.
    I would do a hard reset to see if that will resolve the issue.
    Leave the printer on and unplug the power cable from the printer and wall outlet for 60 seconds.
    Then reconnect the power cable to the printer and wall outlet rather than a surge protector.
    This ensures the printer is receiving full power and may help this situation.
    I have provided a document with some steps to try.
    'Incompatible Ink Cartridge' or 'Indicated Ink Cartridge Must Be Replaced' Message Displays on the C...
    Please call our technical support if the issue persists for other available option. Call 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
    Contact HP.
    Have a nice weekend!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • HP Deskjet 3070A All print cartridges suddenly empty.

    Printed perfectly normally with genuine HP cartridges (new) then stopped and print utility says all cartridges are empty and incompatible Please advise how to reset.

    Hello Sian14, I hope you are well
    I saw your post about the ink cartridge issue you are having with your Deskjet 3070a model and would like to make a suggestion to you. After some research, I have found the specific troubleshooting guide used for this issue. If the problem is not resolved afterwards, I would then suggest calling HP for your options. I will leave their contact info at the bottom.
    'Incompatible Ink Cartridge' or 'Indicated Ink Cartridge Must Be Replaced' Message Displays on the C...
    If you are calling within North America, the number is 1-800-474-6836 and for all other regions: click here.
    Have a great Thursday
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • Airprint problem deskjet 3070a, ipad does not find my printer

    I just got a deskjet 3070a and it works fine with all my laptops. When i try to use airprint on my ipad it doesn't find my printer, what can I do?
    I have tried anything I could found on Internet but I couldn't solve this problem....
    Actually i don't know if it can help but on the printer the IP numer is :192168 1 101 while on my ipad is 192 168 1 102 so they are differents, but they both works with the wireless.... I don't know what to do... please help!!
    Thank you

    Hi,
    Firstly please check to see if your printer in the list:
      http://support.apple.com/kb/ht4356
    If YES, you can use this to fix
      http://www.apple.com/support/ipad/assistant/airprint/
    If NO you have to print using other apps (if applicable) such as
       http://itunes.apple.com/au/app/hp-eprint-home-biz/id299531647?mt=8
    More info from this:
       http://h30434.www3.hp.com/t5/ePrint-Print-Apps-Mobile/Cloud-Services-Supported-Printers-ePrint-Airpr...
      http://h30434.www3.hp.com/t5/ePrint-Print-Apps-Mobile/Important-Information-for-ePrint-Home-amp-Biz-...
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • HP Deskjet 3520 e-All-in-O​ne - SETUP Cartridges cannot be used

    I purchased a refurbished Deskjet 3520 today from a local electronics store that came with SETUP Cartridges in the box.  I turned on the printer, installed the cartridges, and received the following error message:
    ! Do not use SETUP
    SETUP cartridges cannot be used after the device has been initialized.  Remove and install non-SETUP cartridges.
    Is there a way for me to do a factory restore / reset so that I can get these cartridges to work?  The cartridges themselves have not been used before.  Just trying to save money and use the cartridges that came with the device.  Any help would be appreciated.

    Hello busackzl,
    Welcome to the HP Forums! I understand your concerns with your Deskjet 3520. Please try these steps:
    1) Make sure this printer is plugged into a direct wall, not a surge protector
    2) Take out the ink cartridges, close the cartridge door
    3) Unplug the power cord from the back of the printer (Do not press the power button)
    4) Wait 60 seconds or more
    5) Plug the power cord back into the printer, wait for the printer to turn on completely
    6) Now, install the ink cartridges
    If you are still receiving the same message, then please contact HP technical support for further assistance. Click here to find out: HP Worldwide Contact.
    Good Luck.
    I worked on behalf of HP.

  • Can you bypass the Use Setup Cartridges on a HP Deskjet 3070

    Hi
    We have a Deskjet 3070 which was printing in different colours instead of black even with new black cartridges installed. So, we decided to do a factory reset by powering off and useing the OK, Cancel and On/Off power button sequence. Now it is looking for the Setup Cartidges but these were thrown out ages ago. Any suggestions?
    Thanks
    JK

    Hi @ShamrockLiniux , and welcome to the HP Forums.
    I see you are experiencing setup cartridge requests. 
    When performing the type of reset performed, the printer will require setup cartridges. 
    The best recommendation I could make would be to contact HP directly.  You can utilize this website to learn how to contact HP appropriately, based on your region: Contact HP Worldwide.
    Thank you for posting on the HP Forums.
    Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
    Jamieson
    I work on behalf of HP
    "Remember, I'm pulling for you, we're all in this together!" - Red Green.

  • Black cartridge not printing on Deskjet 3070A

    Cannot get black ink to print on deskjet 3070A. have tried all recommended solutions and nothing works. very frustrating and time consuming. has anyone solved this problem ???

    Hi, is the printer in warranty?
    Although I am an HP employee, I am speaking for myself and not for HP.
    Twitter: @Ciara_B_HP

  • My HP deskjet 3070A is displaying the error code 0x19a0041, and no trouble shooting tips working.

    I have spent all morning trying to resolve a problem on my hp deskjet printer (3070A) keeps displaying 'printer failure 0x19a0041' I have worked through all the trouble shooting tips on your website, but none seem to be working, so I tried to request a service, so then I tried to re-new my warranty, to request a service, but the system couldn't process my request. I then tried to call your helpline numbers listed in your website, but the number is no longer in use. Please help! I am at my wits end, as have spent a whole morning trying to sort this out! Thanks, Sarah

    i tried to reset the printer as you said. it worked. and completely destroyed it.  it keeps asking for the setup cartridges, which i still have, but they're not new ones. which i have found out, is a MUST for the printer to recognise them and start up. since you work for HP is it possible for me ask them to fix this without charge?  i cannot check my warranty because my ORIGINAL problem which i was trying to fix does not allow me to install the driver for the printer and therefore i cannot detect whether my warranty still covers the product. Nor does the the printer allow me to scroll down and check my ID model number in the information menu for some insane reason, so i cannot even check manually....
    ah the terms of use seem to say that i cannot ask them to fix this mess without charge. great.
    do you have any advice?

  • Setup cartridges

    Hello, I have gotten completely stuck on my HP Deskjet 3070A all in one. It has worked very well for a couple of years. Suddenly it wouldn't use black ink at all. Other colors printed fine. Of course I replaced the black ink with a new cartridge, and of course I tried the printhead cleaning options. I then tried to follow an instruction to do a reset of the printer, but the result was that I now get a "Thank you for choosing HP" every time I turn the printer on, and when I press "OK" to that, I invariably get the message "Use SETUP cartridges". I have seen various solutions to this on this board, and have tried to follow each of the variations, but to no avail. I have tried disconnecting the power with cartridges in and with cartridges out. Still the same message:"Use SETUP cartridges". I live in the UK, and calling the UK support led nowhere. I cannot find any official information in my documentation about resets or how, when, or why to use setup cartridges (other than the initial setup after purchase). I have long since discarded my setup cartridges, as I had no idea they were essential later, and they had run out of ink anyway. I would be willing to purchase new setup cartridges, if needed, but cannot find any place to buy them online (and I assume only HP can supply them anyway). Also, I have no idea whether setup cartridges are tied to a printhead, so that it all needs to be replaced together. Any help at all would be appreciated. 
    This question was solved.
    View Solution.

    You mentioned that you contacted HP by phone, but received no support, is that because the printer isn't in warranty or were they just not able to resolve the issue?
    I would honestly weigh your options here.
    If the ink levels are at zero, I would recommend replacing the cartridges as the best troubleshooting step that you could try. There really is no way to try any other troubleshooting steps until you have cartridges in the printer that actually have ink. You can't do anything with empty cartridges unfortunately. 
    Then again, I would see how much buying a new printer would cost you vs the cartridges. With a new printer, you will have a new set of starter cartridges and a one year warranty that will cover any hardware and software issues that you may have, if any. It's also possible to purchase an extended warranty though HP, that will cover any issues with the printer after the one year warranty is up. 
    So really that decision is up to you.
    If I have been helpful or if you’d like to say thanks you can click the white star under my name to give me Kudos.  I really appreciate it!
    Best of luck,
    Kyle
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Maybe you are looking for

  • Is there a compatibility list of what projectors and displays that work

    Hey guys i have been wanting to update my mac equipment and the new macbook pro graphics card is one i have been waiting for a while but i have been reading all these forms and website about some projectors and displays not working on it. If there is

  • Ipod is not recognized, and doesn't show up in my computer services. Why? And how can I fix this issue?

    My ipod is not recognized on my windows 7 anymore. Drivers are up to date and working properly, everything on my computer is fine, it's just my Ipod. It does not show up in my "Services". It's not my computer, because it doesn't work on any other com

  • Sometimes PDF mails are going without an attachment.

    Hi, I have 3 output types and the 3 custom programs. When the background job scheduled, the standard RSNAST00 will call the custom programs, 1)      The logic which added in the custom programs is once adobe form gets generated for output types, I ha

  • Background method in workflow hangs

    Hi All, I have a background method in workflow which calles a report. Actually the report calles smartforms and I am storing OTF data on application server. I am not displaying the print preview. I am just stroring the OTF data on application server.

  • Setting a specific time for a "hold?"

    Is there a way for me to set a SPECIFIC time for a "hold?" CNTRL+D gives me a duration of an effect, but I can't seem to do the same after I add a "hold." Instead, I have to MANUALLY slide the handle of the red "hold bar" until I achieve my desired l