Hp deskjet 3070A with Mac OS X lion 10.7.5

Recently updated operating system, now cannot scan, computer cannot find scanner, scanner cannot find computer.
Tried loading latest update from HP, computer insists higher version already loaded.

Hi,
Please try following the steps below in order to get the problem resolved:
Go into the Applications folder and enter the Hewlett-Packard folder.
Follow the HP Uninstaller to remove the currently installed HP software.
Download and install the software below, make sure to select HP Recommended Software during the installation:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=al-96582-2&cc=uk&dlc=en&lc=en&...
Once the installation completes click the Apple icon and select Software Update, make sure to select any listed HP update.
Please let me know of any further problem,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Similar Messages

  • Cisco Connect does not run with Mac OSX Mountain Lion (10.8.2)

    When I first installed Cisco Connect that came with my E1500 router, I was running Mac OSX Snow Leopard (10.7) and it worked fine.  I upgraded my OSX to Mountain Lion and now when I start Cisco Connect, I get:
    Unsupported operating system
    The router software supports these operating systems:
    - Mac OS X 10.5.8 or later
    - Mac OS X 10.6.1 or later
    - Mac OS X 10.7 or later
    I saw some other thread/info/download on Cisco Connect with Lion (10.7) but nothing for Moutain Lion (10.8) - is there a fix forthcoming?
    Thanks
    Gary

    All i want to do is disable the guest function through cisco. i live in an apartment and everyone logs into my guest account. i was at my neighbours and they were laughing saying they done need to subscribe for the internet cause they just log onto local wi fi. and mine is one of them. i dont know if that'll slow down my internet with so many people using it. but all i want to do is just avoid it all together and get rid of it. but in this case i am having the same problem as all of you. to disable the guest function you need to go through cisco connect and it is not compatible with mac osx mountain lion. grrrrrrr

  • I bought my Mac Book Pro on 4th July with Mac OS X Lion Version 10.7.4. How can I get new Mac OS Mountain Lion?

    I bought my Mac Book Pro on 4th July with Mac OS X Lion Version 10.7.4. How can I get the new Mac OS Mountain Lion?

    Click here and start the process.
    (68658)

  • Is it possible to upgrade the iMac G3 (1998) to an iMac with Mac OS X Lion or Mountain Lion ?

    Is it possible to upgrade the iMac G3 (1998) to an iMac with Mac OS X Lion or Mountain Lion ?

    The 1998 iMac predates the introduction of Firewire.  So yes, it is limited to 10.3.9.  Sonnett did offer an upgrade to the iMac to allow it to have Firewire.  I don't know if this enabled 10.4 or not.   XPostfacto also offered unsupported 10.4 for older iMacs.   But Spotlight and Dashboard are very slow if you can't upgrade to a minimum of 256 MB of RAM, and preferably 512MB of RAM.   Look at http://www.everymac.com/ to find out your Max.

  • PDF edits with Mac OS X Lion Aperçu don't show up on iPad: anyone with this issue?

    I am using a MacBook Pro with Mac OS X Lion, and an iPad 2 with iOS 5. If I edit PDF files with Aperçu, the drawings or texts I have added do not display on the iPad 2. Is this a known Apple bug? Does anyone else have this problem?

    Actually, it is in iBooks that I have this problem with PDF files that have been edited with Aperçu. With iPad Safari, the PDF edits are displayed correctly, through Google docs PDF viewer; I have not tried with iPad Safari independantly from Google docs, but I think it won't work. It does not work in iPad mail for such edited PDF files that are attached to a message.

  • Does VMware v3.1.3 work with Mac OS X Lion?

    Does VMware version 3.1.3 work with Mac OS X Lion?

    Okay peoples, I have great news!
    I was told that maybe the update for Logic Pro 9.0.0 to 9.1.4 wasn't working for me because I must have renamed my software folder... and I remembered doing so back in 2010.
    You see, my issue was:
    I bought Logic Studio 8 (The big box with piano keys on the side) and then as soon as I did, Logic Pro 9 (the update version) came out. I was inclined to get the latest software, so I upgraded immediately. I remember wondering why my logic pro 8 stayed behind after the update so I foolishly renamed the folders "Logic Pro 8" and "Logic Pro 9" haha. Not knowing this would cause me grief later when I tried to update.
    So, my Logic Pro 9 is working again fine. My only concern now is for the hardware (the Apogee Duet) I am using, as I have to wait for a Lion update in August, thankfully it is only a month away as apposed to 6
    Cheers,
    and I hope this helps.
    Tuck

  • GMail accounts no longer sync with Mac in Mountain Lion

    GMail accounts no longer sync with Mac in Mountain Lion. Should I upgrade to the latest operating system - I'm not sure if it will slow down my laptop as its quite a few years old now.
    If I long in on Safari it works fine so L know that my password is correct. It also works fine on my phone and iPad.

    Troubleshooting sending and receiving email messages

  • Magic Charger  Mobee for Magic Mouse doesn't work with Mac OS X lion Mountain

    The Magic Charger  Mobee for Magic Mouse  Apple
    with Mac OS X lion Mountain
    makes connections overflows and stops the system work.
    What could I do, other that disconnect Magic Charger?

    When you say you cannot add the printer, with the Add Printer pane open, is the 6250 visible in the Default Add Printer view? If no then it could be the USB cable at fault and I suggest you try another cable.
    If the printer is visible but the Mac fails to locate a driver when you select it then you may have to trash the contents of the BJPrinters folder (HD > Library > Printers > Canon) and then run the iX6250 driver installer again.

  • Is the new Photoshop Creative Cloud compatible with MAc OS X Lion?

    Is the new Photoshop Creative Cloud compatible with Mac OS X Lion 10.7.5?

    Yes, according to the system requirements page at Adobe:
    http://www.adobe.com/products/photoshop/tech-specs.html
    Photoshop Creative Cloud will run on Mac OS X v10.7 or v10.8

  • Is Dreamweaver 8 compatible with Mac OS X Lion 10.7?

    Does anyone know if dreamweaver 8 is compatible with Mac OS X Lion 10.7? Want to update  all my hardware with iCloud, which means I need to move from OS 10.6 to 10.7, and I still want to be able to upload changes to my current website until my new site is built (in another application next year)...thanks!

    From what I've been told (have been unable to get a good solid answer though) Lion DOES NOT have Rosetta to run PPC software or UB software. Everything Mac has to be Intel only to run in 10.7

  • VMWare Fusion version 3.1.3 compatible with MAC OS X Lion

    Hi, does anybody know if VMWare Fusion version 3.1.3 is compatible with MAC OS X Lion? I need to emulate windows 7 on my mac. Thanks!

    Hi Andreas
    Your message prompted me to have a quick check at my own VM network settings.  I've got a Win7 BootCamp partition based VM, and 2 Linux VM's running DocuWiki and Squiz.  On each of these I'm using bridged connections without issue.  After my initial problem with Fusion after my upgrade my VM network connections had changed to NAT.  All I had to do was change these back and specify Ethernet as the transport (I'm not one for using autodetect settings).
    It may be that your DHCP server is needing a reboot.  I've got a Netgear router on my network here that acts as my DHCP source and I have on occasion had to restart that to kickstart IP address allocations again.  I would try putting your Linux VM back to bridged networking and setting a manual IP address from your main networks IP range.  If that gets you on to your main network, then I'd try a restart on the DHCP server.

  • I want to assure that Xcode 4.1(Free Version) and PhoneGap(1.1.0) works fine with Mac OS x Lion. Thank you.

    I want to assure that Xcode 4.1(Free Version) and PhoneGap(1.1.0) works fine with Mac OS x Lion. Thank you.

    I experience the same. IMac 27', bought just 6 weeks ago (2011), then updated from SL to Lion and now the fun begins. Crashes, crashes, crashes.... Repaired volume yesterday, repaired access rights, now even in safe mode it crashes after 2-3 mins and I am in endless loop of boot-crash-boot-..., need to pull the plug.
    Brand new hardware, literally unused ( some photos, nothing more), 1.700 €.... Got an iPhone, an iPad as well but I can't tell you how disappointed I am now! As someone said before, I bought an iMac to use it and not read kernel logs, repair volumes, search for help for days....
    Thoughts?

  • HT1338 is it iweb still work with mac os mountain lion?

    is it iweb still work with mac os mountain lion? i want to make new web page and using mountain lion is it work under i cloud?

    You will need to find another hosting service.You can publish to another service in iWeb '09 and above by choosing the FTP option in the Publish pane; in earlier versions you will need to publish to a local folder and upload using an FTP program such as Cyberduck. More details here:
    http://rfwilmut.net/missing2

  • Partitioning and Installing Windows 7 with Mac OS X Lion

    Hi
    after failing seriously with the partitioning after installing Win 7, I hope that I will find some help from the scratch...
    I want to install OS X Lion with Win 7.
    3 Partitions with Mac are needed and 1 fro Windows.
    I got 750Gb on my Mac Book Pro.
    Disk should look like this:
    100Gb Main Partition (Mac)
    200Gb Documents Partition (Mac)
    300Gb Stuff and Games (Mac)
    150Gb Windows 7 Partition
    I tried now to create a 100Gb Partition for Mac and a 150Gb Partition for Windows 7.
    After Installing the Mac OS, I was trying to add the 2 other Partitions, but it already telling me that i'm gonna loose my Windows Boot when I change the Partitions. I pressed ok and restarted with the windows 7 DVD for the recovery, which wasn't working due to version incompability -.- (I installed Windows from that DVD)
    What steps should I make to get this to work? Some guys says that it not gonna work, but a friend of min has 3 mac partitions and a windows. Sadly he can't remember the way to this setup
    Thank you for the help
    NESTi

    What you are talking about is illegal.
    Here are the relevant words from the Snow Leopard EULA
    A. Single Use License. Subject to the terms and conditions of this License, unless you have purchased a Family Pack or Upgrade license for the Apple Software, you are granted a limited non-exclusive license to install, use and run one (1) copy of the Apple Software on a single Apple-branded computer at a time. You agree not to install, use or run the Apple Software on any non-Apple-branded computer, or to enable others to do so. This License does not allow the Apple Software to exist on more than one computer at a time, and you may not make the Apple Software available over a network where it could be used by multiple computers at the same time.
    You should also read the terms and conditions of use of these forums, which include the following:-
    Keep within the Law
    No material may be submitted that is intended to promote or commit an illegal act.
    Do not submit software or descriptions of processes that break or otherwise ‘work around’ digital rights management software or hardware. This includes conversations about ‘ripping’ DVDs or working around FairPlay software used on the iTunes Store.
    Do not post defamatory material.

  • Problem with Mac OS X Lion reinstall - Cannot install on server volume

    Hi
    I have a MacbookPro 2011 that has been upgraded to Lion from Snow Leopard. I can log on and use the computer but I want to reinstall Lion and make a clean start. I have created a rcovery partition on an external drive and booted to this partition using the option command when re-booting. The Lion install process goes well until the screen which asks you to select the disk where you want to install Mac OS X Lion. The Macintosh HD drive is there, but I cannot select it as I get the following message with it:
    You cannot install Mac OS X on a server volume. You need to use disk utility to erase this volume before you can continue to install Mac OS X.
    I have no idea why the install is seeing my hard drive as a server volume. I just want to install OS X Lion, preferably using the archive and install option, on a standard MacbookPro. If I go ahead and erase the HD  will I still be able to install Lion? How will Apple know that I have already paid for the Lion upgrade if the main HD is erased? I have already created a clone of the existing HD so I have a backup of all files I need.

    Slight Update. I found a guy with my EXACT problem here.  https://discussions.apple.com/thread/4103108?start=0&tstart=0  Go to this discussion for further details.

Maybe you are looking for

  • Font Book 2.0.3

    I am trying to find out if my Font Book has Crashed. My Illustrator all of a sudden would stop responding, uninstalled it and reinstalled. But I get the following error when I tried to create a PDF: The font Futura could not be imbedded in the PDF do

  • Error Occurred While Rinning A simple Android Native SUP Application ?

    Hi Experts, I have Created a Sample Android Application in Native SUP 2.1.3 Environment, followed by 10 steps to develop SUP101 Android Native application [Part I] documentation , Can any one solve my issue , Thanks In advance, Vamsi Konanki.

  • Content is missing after I do a "Check-In All"

    Hi, I had created a folder ABC and many sub folders underneath. Many a times I had done a Check-in at the individual topic level and it was fine. Last time when I did a "Check-In all", the content disappeared. What I see now is just the folder struct

  • 30 fps projects automatically become 25 fps when export a DVD from share menu

    I shoot some video at 30 fps.  I made a project setting to match that. My 30 fps projects becomes 25 fps when I make DVDs from FCPX share menu. I thought it would make 29.97 DVDs but somehow FCPX makes PAL DVDs. I tried different settings: all 23.98,

  • Lost extension options in right click menu since v22.0 upgrade

    I upgraded to v22.0 (Linux) the other day and since then I've lost exetnsion options that were previously listed in the right click context menu. I'm not certain which version I was on before but I believe it was v20 and all were working in conjuctio