HP deskjet 3510 network problems

I have a HP deskjet 3510 all in one. It worked well at my initial address, but since I have moved, it will not join the new network. Please help me add this printer to my new wireless network. Thank you,
RTHP
This question was solved.
View Solution.

Hi,
Sounds very similar to having a new router. Please use the following instructions to fix:
http://www.hp.com/global/au/en/wireless/reconfiguring-system-help3.html
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

HP Deskjet 3510 Wireless Network Problems after Password Reset

The password on our wireless router was recently changed, and I have not been able to get my printer working since - this has actually happened before and I WISH I could remember how I fixed it last time, but this time it seems no matter what I try (deleting the printer and any related software, reboot, reinstalling software and hardware), nothing seems to help. I managed to print a wireless network test page and there it tells me that the "WPA security passphrase configured on your HP printer does not match your wireless router setting". Now that much I already know, and the solution makes sense as well, to re-enter the wireless network WPA security passphrase, except I am drawing a blank as to how exactly I am supposed to do that. Oh and I should also mention that unlike last time now the blue wireless control light and the white e-print light on the printer control panel are blinking constantly as soon as the printer is turned on and started up. I would really appreciate any help anyone could give me. Thank you!

Hi,
Please use the following instructions to (re)setup it up:
HP Deskjet 3510 e-All-in-One Printer support
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

How do I remove my HP DeskJet 3510 from my network?

I recently had to get a new router. I am now connecting my printer (HP DeskJet 3510). I have it connected successfully to my laptop, but a problem appeared after doing so. If I look at my "network connections" at the bottom right of my screen, it shows that my printer is its own unsecured wireless connection. This never happened before with the old router. What did I do wrong and how can I remove the printer from the network? Any help an assistance in this problem will be greatly appreciated!!!

HI @sparkyIN74 ,
I see that you are trying to setup the printer on the new router, but right now the printer isn't showing any secured wireless connection. I can help you.
Most likely it is connected to the Wireless Direct and not your network.
Restore the printer defaults. Go to Setup, Wireless Menu, Restore Defaults.
Connect the USB cable from the printer to the computer. This is just temporarily to configure the wireless.
I have provided a document with the steps for setting up the printer over the network.
Installing the Printer Software for a Wireless Network Connection.
Select your operating system, then start at step 4 and in part c, select Convert a USB connected printer to wireless.
What operating system are you using? How to Find the Windows Edition and Version on Your Computer.
If you need further assistance, just let me know.
Have a great day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

I have HP Deskjet 3510 connected wireless - problem is that it wants to print only black and white - is there a color button I am missing? The print quality report is fine in color etc.

I have a HP Deskjet 3510 and it wants to print only in black and white.
The Print Quality Report is fine and in color.
Is there a color button I am missing?

In the Print & Scan system preferences, does it indicate it is using a generic printer driver or a Gutenprint driver?
Also, if you click on Options & Supplies, you might want to check and see if has to be enabled. That kind of sounds odd though.
Another thing is it might not be showing. If the bottom of the print dialog has a button that says "Show Details," click it. Then, you can change settings in the popup menu.

HP Deskjet 3510 wireless & Mac OS=Piece of junk

I recently bought an HP DeskJet 3510 printer and use Mac OS X 10.6 and 10.8 on various computers. Since opening the box I've had nothing but problems with wireless printing. The drivers are completely useless and the set up is ridiculous since you can't access anything except via USB or wireless.
This printer seems to always have to HAVE the first IP in your DHCP pool. If not, your'e out of luck and have to do the set up all over. Each weekly I have to set the printer up again over and over. I have been through all of the mediocre Mac install instructions the same results. It's ashame that this is such BS to set up.

I am not really sure I understand your problem. You say that you cannot access anything except USB or wireless. What else did you want to access?
Let's set a static IP address for the printer:
- Print a Network Config Page from the front of the printer. Note the printer's IP address.
- Type that IP address into a browser to reveal the printer's internal settings.
- Choose the Networking tab, then Wireless along the left side, then the IPv4 tab.
- On this screen you want to set a Manual IP. You need to set an IP address outside the range that the router automatically sets (called the DHCP range). If you do not know the range, change the last set of numbers (those after the last '.') to 250
- Use 255.255.255.0 for the subnet (unless you know it is different, if so, use that)
- Enter your router's IP (on the Network Config Page) for the gateway.
- Enter 8.8.8.8 for the first DNS and 8.8.4.4 for the second DNS. This is Google DNS. You can choose another external DNS if you wish.
- Click 'Apply'.
Now, shut down the router and printer, start the router, wait, then start the printer.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Changed wifi password now cant print on deskjet 3510

chhanged wifi password--cannot get printer hooked up help

That is because your printer is no longer connected to your network. You have to input the new password into the printer and connect. Go here... http://support.hp.com/us-en/product/HP-Deskjet-3510-e-All-in-One-Printer-series/5157460 for all information on how to reconnect to your SSID.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

HP DeskJet 3510 Printer Alignment Page Doesn't print correctly.

Hi I have a strange problem with my HP DeskJet 3510. I took it out of the box installed everything loaded up paper and powered it on. It went through all the motions and blah blah and printed out an alignment page. Anyhow it didn't look right to me but I went ahead and scanned it anyway and it then said "ink cartidges are set to default color quality" or something to the effect. I hit ok and it went to the main menu.
Now from my wifes phone I can connect to the printer and print just fine but from our laptop the alignment is all jacked up. If I type a bunch of random lines into notepad or anything really it misses a bunch of lines and some lines just don't even appear. Which I could only think would be because the alignment page isn't right.
Also from app that gets installed from the software CD on the laptop I can choose to align the cartridges but when I do and it prints and I scan the page (that still looks jacked up to me) the software tells me the alignment failed and asks me to rescan after I put the page in there right. I know the page is in there right its face down and in the bottom right hand corner as it should be.
Now I have ran the cartdridge cleaning process several times took the cartridges out and looked for debris or anything that could be in the way even though I doubt its any of those things becuase like I had said earlier it prings perfectly from my wifes printershare app from her smart phone. Just as it appears on her screen. Only getting this issue from the PC.
Anyhow I am going to attach a photo of how the priner aligment page comes out from me doing it on the printers control panel and from the PC's software both it comes out looking like this. If you could please give me some advice to what to do next that would be great as I am out of ideas. Did I just get a bad cartridge? If so why would it print from my wifes phone fine and not from the PC? Is this how the alignment page should look (can't read any of the things on the lower portion really).
Other Info : PC is running Windows . Other PC has same problem running Windows XP. Wifes Phone is using PrinterShare app. Any information or helpful advice is appreciated thank you guys in advance.

Finally, after installing and uninstalling the print cartridges on my HP-3510 around 10 times; I finally got the alignment page to print and then scan successfully. It's a nice, very economical printer when it works properly. I was on the verge of tossing it but glad I didn't. I guess the lesson is that persistence can pay off. My thanks to the other two contributing posters.

HP Deskjet 3510 Series (3512) only printing in black and yellow.

Hello.
My HP Deskjet 3510 recently ran out of ink (or so I thought.) I purchased new 61xl color and black cartridges and replaced them. However, the printer is only printing in black or yellow. I am unable to get any red, blue, or grayscale.
I have cleaned the printer heads several times, and alligned the printer several times but this has not helped the problem.
I am looking for any suggestions on what I can do to get my printer working once again.
Thank you.
Sara C.

Hello @sarajo0531 , and welcome to the HP Forums, I hope you enjoy your experience!
I see you're running into print output issues. I would like to help!
I'd start by removing the ink cartridges, and performing a power reset on the printer. Disconnect the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug the printer back in. Ensure you plug the printer directly to a wall outlet. Make sure to bypass any sort of surge protector or power bar.
I would then suggest following the steps laid out in this document:
Fixing Print Quality Problems for the HP Deskjet 3510 and Deskjet Ink Advantage 3510 e-All-in-One Pr...
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

How do i install HP deskjet 3510 printer without the disk to my laptop

how do i install HP deskjet 3510 printer without the disk to my laptop

Hi,
You can download from the following link:
http://h20000.www2.hp.com/bizsupport/TechSupport/ProductList.jsp?lang=en&cc=us&taskId=135&prodTypeId...
Full Feature Software and Drivers is the one you definitely need first.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Installing HP Deskjet 3510 Wireless Error Message

I just purchased my HP Deskjet 3510 Wireless Printer today and I'm trying to install it on my Macbook so it will print wirelessly without the USB. I'm getting the follwing error messege and wondering how I can fix this? Any help?

The only way around it is to use Wireless Direct, but you will have to switch among the different wireless networks with your Mac.
Follow steps one below to enable Wireless Direct for the printer (which will act like a router):
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03382115&cc=us&dlc=en&lc=en &product=5157483&tmp_track_link=ot_search
Next click the Wifi icon on your Mac, select Show Networks,
Click on Joind other network and connect to the wireless direct connection,
Hope that may help,
Shlomi

Deskjet 3510 will not scan wirelessly on OS 10.9

I have a Deskjet 3510 that worked great wirelessly on my old Mac with Snow Leopard. I recently purchased a new IMac with Mavericks OS 10.9.5. The printer will print wirelessly but not scan wirelessly. It will only scan with the USB cable attached. I uninstalled and reinstalled the latest HP software. When I disconnect the USB it says the wireless connection cannot be found. I reset the wireless connection and it is good. What am I missing here?
This question was solved.
View Solution.

Thanks very much for your help with this. I followed your steps and it is now working. The main problem I saw was that the default setting was "airprint" which kept coming up each time. Needed to be changed to Bonjour. Even when I deleted the printer and then added it back in as you suggested, "airprint" as the Kind kept coming up. Once I changed it, all was good. Thanks again.

Hp printer deskjet 3510

when i put my att router password to connect to my printer wirelessey it states that printer and computor are connected to two different modems and I have only the one att modem. I have reinstalled the software tuned both the printer modem and computor off and un plugged the printer to no avail nothing works help!!

Hi , I see that you're experiencing issues trying to get your HP Deskjet 3510 e-All-in-One Printer on your wireless network. I would like to help you. What method are you using to configure your wireless network on the printer? To ensure you are connecting the printer to the correct network I would you try the steps in the guide, Setting Up the Printer for a Wireless network. Go to: Section for Windows 7- Method two: Use the HP Printer Install Wizard - Step two: Connect your printer to the wireless network - Option two: The 'Wireless Setup Using a USB connection' screen displays. Video: How to Connect a Wireless Printer to a Wireless Network Using a USB Cable. If your printer shows connected to the network, are you able to ping the printer?To do this, Print a Network Configuration Page.
Look for the IPV4 address, it will look like 192.168.xxx.xxx.Open your internet browser (e.g. Firefox, Internet Explorer, Chrome) and enter your printer's IP Address into the address bar and hit Enter.
If your printer and the computer are on the same network, the printer's Embedded Web Server (EWS) should appear. The EWS provides access to all sorts of settings on your printer. Another thing to consider is your SSID. If the default network name on your router has not been changed (for example, the default network name (SSID) for Netgear routers is "Netgear"). If someone near you has a Netgear router and has not changed it, than this can cause confusion when selecting your network name. Printer see all networks, in your area that are within range. Therefore, I would consider changing your network name, if it has the default SSID. The printer operates in the 2.4GHz band only. Here's a link to the, Wireless printing center information. Please respond to this post with the result of your troubleshooting. I look forward to hearing from you. Good Luck!

Deskjet 3510 reduced scale printing

The print driver for the Deskjet 3510 is very basic and does not include an option for printing at a reduced scale (less than 100%).
Has anyone figured out how to do this yet?
At this time I am forced to burn up more paper and ink by copying the 100% print at a reduced scale.
Why did HP give the ability to copy at a reduced scale but not print?

For a mac
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&dlc=en&lc=en&os=4158&product=5157483&softw...
go to the link choose the version of OSX and install it
Hope this helps.
***** Click the KUDOS Thumbs UP (Like) on the left to say 'Thanks'*****
****Make it easier for other people to find solutions, by marking my answer “Accept as Solution”&"Kudos"if it solves your problem.****
-VJ
Although I am an HP Employee, I am speaking for myself and not for HP.

Hp deskjet 3510 is online but will not PRINT

my hp deskjet 3510 is connected to wireless. printed "wireless network test results" says no probems found, but under network says "no other networks detected matching my SSID". But WILL NOT PRINT NOTHING. HELP PLEASE ASAP

Hi @kc-s
I can help! What operating system, and version do you have? Mac or Windows?
While I wait to hear from your, please use the following document and let me know the outcome; 'Printer is offline' Message Displays on the Computer and the HP Printer Will Not Print.
I hope this helps.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Attempt to obain MAC address on Deskjet 3510 printer

Please tell me where to find the MAC address for HP Deskjet 3510. Am attempting to wirelessly attach to tethered network using (legally) phone as connector. Number did not print out on "Print Status Report". Thank you.

Hi dbqueen,
Welcome to the HP Forums.
I see that you are looking for your MAC address for your HP Deskjet 3510 printer.
Please take a look through this guide. Printer Does Not Maintain Wireless Connection. Solution One shows how to print the wireless report. This will show your printer's MAC address.
Hope this helps, and have a great day.
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

HP deskjet 3510 network problems

Similar Messages

Maybe you are looking for