HP Deskjet 3520 e-All-in-O​ne Printer. Help tells me to connect to computer with USB cable

I cannot scan anything at the moment despite the fact that I was able to do so several weeks ago.  I went to the HP online support site and downloaded a scan doctor programme.  It tells me that I do not have the proper scan software on my system and to download it from the HP website.  It does't take me to the specific software I need but to a list of things I don't have so I downloaded all of this.  I am half way through the setup process for one program and it is asking me to connect the printer/scanner to my computer using a usb cable so that "the settings of your wireless network can be communicated to the printer".  I don't remember getting a usb cable with the printer but if I did I have no idea where it now is.  What are the chances that finding this/buying this will actually solve my problem and is there a way to solve them without the cable?  Any advise would be greatly appreciated.

Hi @translator82,
Welcome to the HP Forums!
I noticed that your HP Deskjet 3520 is telling you to connect it to the computer with a USB cable. I am happy to help you with this connection issue!
To download the software, please visit this website, HP Deskjet 3520 e-All-in-One Printer Drivers, if you are using Windows 7 or above, it is recommended to use the HP Printer Install Wizard for Windows. If you do not know the Operating System you are using, please visit this website. Whatsmyos.
In the meantime, page 33 of your printer's user guide has all the options of how to connect this printer. User Guide. For the traditional wireless setup you will need a USB printer cable. Otherwise, you can always try Wireless Direct.
Hope this helps!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Similar Messages

  • HP Deskjet 3520 e-All-in-O​ne Printer

    sir my problem about my printer is i dont install the cartrige that come with the packages of my printer and i just throw it long ago now a cant use my printer because the printer dont want to recognise regular cartrasdges....what im i going to do now sir..

    you should call HP so they can send you some setup cartridges

  • HP Deskjet 3520 e-All in one printer trouble with scanning network, connection and very slow print

    Dear all
    I bought two days ago HP Deskjet 3520 e-All-in one printer serie, but i have some really bad issues with the scanner! I have searched on the internet and i couldn’t find anything to solve the problem. 
    I have installed the printer according to the book of the printer, so everything did go well(i think), except that i can’t connect the scan to my computer, a Mac OS X (i am connected with the printer). I get directed to the website where i can connect the scanner, but every time i try to connect it with wi-fi, i get two notification, one from my computer (from HP Itility (Dutch) program) that the connection is off and second from the website that i have to make sure that i’m connected with internet (which i am) and to check the IP address if it is the same with my computer (which is the same). 
    Obesely something did go wrong, but i can’t find the problem. 
    Beside when its copy or prints a document (no matter how many pages) it’s very slow. It takes 10 -15 minutes till the printer starts. Has it something to do with the problem i’ve got with the scanner or is the printer always so slow? Because the very first time, when i installed the printer, it printed very fast.
    By the way i also print the test-results to check if there is a problem, but according to test-results there are no problems at all. 
    I hope that someone recognize this problem and can help me to solve it. 
    Regards, 
    Esra

    Hello chesterpascual,
    Welcome to the HP Support Forums!
    Regarding the Deskjet 3520 and the error to use setup cartridges, you will need to call HP's Technical Support to see about sending some to you.
    Click here to locate the contact information.
    Regards,
    JERENDS
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • Any Apps for HP Deskjet 3520 e-all-in-o​ne

    are there any apps on the eprint center that will work on my HP Deskjet 3520 e-all-in-one
    This question was solved.
    View Solution.

    You will not be able to add any apps to that printer.

  • Where is the IP number for a HP deskjet 3520 e-all-in-one, needed to install into windows 7?

    Where is the IP number for a HP deskjet 3520 e-all-in-one, needed to install into windows 7?

    Hi - You can print a test page to get the IP address for your printer.  Follow these instructions:
    On the printer control panel, press the Wireless button ( ), and then press the button ( ) next to Settings .
    Press the Down Arrow ( ) to select Print Report , and then press OK .
    Press the Down Arrow ( ) to select Test Report , and then press OK .
    The printer prints the test page.
    Hope that helps.
    Say Thanks by clicking the Kudos thumbs up. Please mark the post that solves your problem as an Accepted Solution so other forum users can utilize the solution.
    I am an HP employee.

  • Question for Deskject 3520 e-all in one re: printing fonts and one sheet preference

    For a Deskjet 3520 e - all in one - printing from Ipad -How do I adjust fonts and make my printer print one side only ?

    HI millchea,
    Are you printing from an app or printing using airprint ? 
    What exactly are you trying to print ? ( email, webpage, ect....)
    Here is an article about how to change font size and enable screen zoom. You can only change font size for mail, calendar, and notes app. For other applications you need to change font size directly from the app itself. Listed in this article are directions and screenshots to help you do this. 
    If I helped you at all it would be great if you clicked the blue kudos star!
    If I solved your post please mark it as solved to help others.
    I'm a printer tech with HP.

  • HT1349 my IPOD touch won't be recognized by my DELL Latitude PC and it won't synch. I'm technologically handicapped but all I know is it used to synch whenever I would attach it to computer with USB. Aside from tossing my DELL can anyone help?

    My IPOD Touch isn't being recognized by my PC(DELL LatitudeD630) and it won't synch. I'm "technologically handicapped" but all I know is it used to synch whenever I would attach it to PC with USB cable. Aside from tossing my DELL can anyone offer suggestions that might solve this problem ? Thanks

    I had this issue, I fixed it by going to:
    Start > Control Panel > Devices and Printers
    Then find the iPod, and Right Click > Properties > Hardware > Properties > Driver > Update Driver > Update Automatically
    The driver had not been automatically installed, and windows found and installed the driver files for me. Took ~90 seconds, and then the iPod began it's sync process almost immediately after. Hope this helps anyone with the same issue! I'd try this before re-installing iTunes.

  • TS3694 When i plug in my Iphone to restore it, itunes gives me error code 2009. All i have on my iPhone display is the itunes logo and the usb cable.

    When i plug in my iPhone to itunes so i could restore because i found it, itunes gives me error code 2009. on my iPhone, all that is displayed on the screen is the itunes logo and a usb cable saying to connect it to itunes. Help please?

    Error 2000-2009 (2001, 2002, 2005, 2006, 2009, and so on)
    If you experience this issue on a Mac, disconnect third-party devices, hubs, spare cables, displays, reset the SMC, and then try to restore. If you are using a Windows computer, remove all USB devices and spare cables other than your keyboard, mouse, and the device, restart the computer, and try to restore. If that does not resolve the issue, try the USB issue-resolution steps and articles listed for Error 1604 above. If the issue persists, it may be related to conflicting security software.

  • I am attempting to re sync my iPad2 with my macbook pro iTunes and i get all the way to where it tells me to connect to iTunes...which my iTunes on my macbook sees as connected, yet my iPad still tells me to connect to iTunes...

    I am attempting to re sync my iPad2 with my macbook pro iTunes and i get all the way to where it tells me to connect to iTunes...which my iTunes on my macbook sees as connected, yet my iPad still tells me to connect to iTunes...AND yet it is connected..HELP

    Your iPad is going to show "Connect to iTunes" screen until you either set it up successfully or restore it. If you've already set your iPad up in the past, "Connect to iTunes" typically indicates the iPad is in Recovery Mode and you must restore it.

  • HP Deskjet 3520 e-All-in-O​ne - SETUP Cartridges cannot be used

    I purchased a refurbished Deskjet 3520 today from a local electronics store that came with SETUP Cartridges in the box.  I turned on the printer, installed the cartridges, and received the following error message:
    ! Do not use SETUP
    SETUP cartridges cannot be used after the device has been initialized.  Remove and install non-SETUP cartridges.
    Is there a way for me to do a factory restore / reset so that I can get these cartridges to work?  The cartridges themselves have not been used before.  Just trying to save money and use the cartridges that came with the device.  Any help would be appreciated.

    Hello busackzl,
    Welcome to the HP Forums! I understand your concerns with your Deskjet 3520. Please try these steps:
    1) Make sure this printer is plugged into a direct wall, not a surge protector
    2) Take out the ink cartridges, close the cartridge door
    3) Unplug the power cord from the back of the printer (Do not press the power button)
    4) Wait 60 seconds or more
    5) Plug the power cord back into the printer, wait for the printer to turn on completely
    6) Now, install the ink cartridges
    If you are still receiving the same message, then please contact HP technical support for further assistance. Click here to find out: HP Worldwide Contact.
    Good Luck.
    I worked on behalf of HP.

  • Deskjet 3520 e-all in one printer not printing black ink

    I just installed a new hp 564xl black ink cartridge with an expiration date of 01/30/2017. Low and behold the black  is not printing and the printer was purchased in 08/2012. I did everything that was suggested in the support forums and to no avail did anything work. The three other colors print out fine except the black. Based upon everyone's answers I guess there is no repair for it and I should scrap this unit after three years of constant use. I would think by now there would of been a solution posted to this problem but Hp has failed us. I've been using HP printer products since I purchased my first computer in 1992 and never had a problem with them until now.  My second printer which was purchased in 2004 is still going strong, except that it is not wireless. If I need to purchase a new wireless printer, I'm sorry to say that  I might have to look at the competition. If anyone knows of a solution I would appreciate it. 

    The post here has links to a troubleshooting document for the Deskjet 3520.  If the steps there do not resolve the issue please contact HP Support, even if the printer is no longer under warranty.   If the above does not give satisfactory results then please post back here and mention the country you are in. 

  • Deskjet 3056A E-all-in-one not printing black ink properly

    Hello, I've had my Deskjet 3056A E-all-in-one printer for 2 years and didn't have any problems until about 3 months ago. My black ink cartridge suddenly stopped printing properly. It started to seem like I needed to replace the ink, so I did, but that did not fix the problem. It still seems like the ink level is really, really low sometimes, but it's a brand new cartridge. I couldn't even align the printhead because the black ink wouldn't print. Then I cleaned the printhead and cleaned the ink smear. When the test papers printed after the cleanings the black ink would only print half of the line of letters or numbers, or it was just choppy and faded. I checked the ink levels and it says both of my ink cartridges are almost full still. I was thinking about replacing the cartridge again, but I don't want to waste the money if it won't fix the problem. The color cartridge works completely fine, just to clarify.

    If the black cartridge is in warranty you could contact HP Phone Support
    Although I am an HP employee, I am speaking for myself and not for HP.
    Twitter: @Ciara_B_HP

  • My i phone 3gs seems to have crashed and all that is on the screen is the i tunes logo and the usb cable, will i lose all my data if i restore the phone or is there a way of doing it without losing all data ?

    my i phone 3gs has crashed and all that is left on the screen is the i tunes logo and the usb cable picture, when i plug the phone into my laptop its asking me to restore the phone and this will erase all my data. is there any way around this so i dont lose all my pictures ?

    Connect your iphone to your computer
    Hold down the home button and the power button until the screen goes blank
    Turn back on your phone.
    Your phone has seemed to enter recovery mode, but its ok! The steps above should bring it out

  • My I Pod touch will not charge on any computer, with any cable or in any wall outlet.  No sleep mode....nothing.  I can not get it to power on at all now

    I have tried multiple cables, multiple computers and it appears to be dead.  When I went to the Apple Store they tried to sell me a new one.....not what I wanted.  I asked about a new battery but was told no.  How do I retrieve the data on my I Pod???  Cannot even look into resetting it because it will not power on at all.

    Not Charge
    - See:      
    iPod touch: Hardware troubleshooting
    - Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use.
    - Try another charging source
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar                          
    Also:
    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer          
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • How to connect second computer to Deskjet 3520 e-All-in-O​ne

    How do I connect a second computer to my printer (see subject line) which is connected to my wireless network.
    First computer is a laptop and connects fine.
    Do I have to download drivers etc to the second computer?
    I have been to the drivers & software page but the advisory videos don't download for me so I don't know EXACTLY and HOW MUCH  to download.
    I am in Australia.
    This question was solved.
    View Solution.

    Hi,
    The above link contains all software and drivers (for Windows from XP to 8.1). Please download it, save on your computer (remember where) and run downloaded file on your computer. You can copy it and run on 3rd , 4th, 5th ...  or more computers, no need to download again. Note: for Windows only.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Maybe you are looking for

  • Hit the exception when editing the value of row key column in a new created row in a table

    1. I created a view object with 2 entity objects (parent table: YARD_FIXED_SLOT - child table: YARD_FIXED_SLOT_DETAIL) and the primary key of child table composes of 2 columns ( one of them is FK: YardFixedSlotDetail.FIXED_SLOT_ID REFERENCES YARD_FIX

  • Oracle 10g forms pops up lov twice

    Using Oracle Forms version 9.0.4.0.19 on Windows XP SP3. I have a form with three tab pages. Two of the tab pages have two vendors list of values one with points of contact used for insert mode and one without points of contact used for query mode. I

  • SELECT DISTINCT very slow

    hi @all I'm using Oracle 11g R2 on Windows 7 Unfortunately i have a column in a table that stored multiple vales delimited with *,* e.g. [+*execute 1B-B-06-34-61-00A-281A-A, 1B-B-06-37-10-00A-281A-A, 1B-B-06-37-20-00A-281A-A, 1B-B-06-37-30-00A-281A-A

  • Doubt About the .TPZ File Importing

    Hi Experts, Here We have Completed PI 7.0 Installation. We Imported XI3_0_SAP_BASIS_6.40_12_00.tpz in to IR Instead of XI7_0_SAP_BASIS_7.00_06_00.tpz. Q1) How to Remove the Old BASIS .TPZ File ?????????? Q2) From Where we Can Remove it ????? Q3) With

  • Can't open pps. file in email

    Is there a quick easy solution to opening pps. files in email?