HP Deskjet 3520 e-All in one printer trouble with scanning network, connection and very slow print

Dear all
I bought two days ago HP Deskjet 3520 e-All-in one printer serie, but i have some really bad issues with the scanner! I have searched on the internet and i couldn’t find anything to solve the problem. 
I have installed the printer according to the book of the printer, so everything did go well(i think), except that i can’t connect the scan to my computer, a Mac OS X (i am connected with the printer). I get directed to the website where i can connect the scanner, but every time i try to connect it with wi-fi, i get two notification, one from my computer (from HP Itility (Dutch) program) that the connection is off and second from the website that i have to make sure that i’m connected with internet (which i am) and to check the IP address if it is the same with my computer (which is the same). 
Obesely something did go wrong, but i can’t find the problem. 
Beside when its copy or prints a document (no matter how many pages) it’s very slow. It takes 10 -15 minutes till the printer starts. Has it something to do with the problem i’ve got with the scanner or is the printer always so slow? Because the very first time, when i installed the printer, it printed very fast.
By the way i also print the test-results to check if there is a problem, but according to test-results there are no problems at all. 
I hope that someone recognize this problem and can help me to solve it. 
Regards, 
Esra

Hello chesterpascual,
Welcome to the HP Support Forums!
Regarding the Deskjet 3520 and the error to use setup cartridges, you will need to call HP's Technical Support to see about sending some to you.
Click here to locate the contact information.
Regards,
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Similar Messages

  • Printing problem-new HP Laserjet P2015 and VERY slow printing-

    I have a new HP Laserjet p2015, and while it does print, it is VERY slow—typically about 1 page per minute even for plain black-and-white Word documents. Much time spent with HP support, even got a new new machine… they're out of ideas and think it might be OS related…
    Where do I begin to troubleshoot this?
    Printer is connected directly to computer via USB.

    I have downloaded new drivers, removed and added the printer multiple times, etc. As I mentioned, I've spent a few hours with HP support, tried new USB cable, even got a new machine. They now believe it's something with my system.
    Any reason to believe that reinstalling my system software will help?
    By the way: Printing from Text Edit is not faster. Or if it is, not very. In any case, it's not a realistic solution

  • Where is the IP number for a HP deskjet 3520 e-all-in-one, needed to install into windows 7?

    Where is the IP number for a HP deskjet 3520 e-all-in-one, needed to install into windows 7?

    Hi - You can print a test page to get the IP address for your printer.  Follow these instructions:
    On the printer control panel, press the Wireless button ( ), and then press the button ( ) next to Settings .
    Press the Down Arrow ( ) to select Print Report , and then press OK .
    Press the Down Arrow ( ) to select Test Report , and then press OK .
    The printer prints the test page.
    Hope that helps.
    Say Thanks by clicking the Kudos thumbs up. Please mark the post that solves your problem as an Accepted Solution so other forum users can utilize the solution.
    I am an HP employee.

  • Deskjet 3520 e-all in one printer not printing black ink

    I just installed a new hp 564xl black ink cartridge with an expiration date of 01/30/2017. Low and behold the black  is not printing and the printer was purchased in 08/2012. I did everything that was suggested in the support forums and to no avail did anything work. The three other colors print out fine except the black. Based upon everyone's answers I guess there is no repair for it and I should scrap this unit after three years of constant use. I would think by now there would of been a solution posted to this problem but Hp has failed us. I've been using HP printer products since I purchased my first computer in 1992 and never had a problem with them until now.  My second printer which was purchased in 2004 is still going strong, except that it is not wireless. If I need to purchase a new wireless printer, I'm sorry to say that  I might have to look at the competition. If anyone knows of a solution I would appreciate it. 

    The post here has links to a troubleshooting document for the Deskjet 3520.  If the steps there do not resolve the issue please contact HP Support, even if the printer is no longer under warranty.   If the above does not give satisfactory results then please post back here and mention the country you are in. 

  • HP Deskjet 3520 e-All-in-O​ne Printer. Help tells me to connect to computer with USB cable

    I cannot scan anything at the moment despite the fact that I was able to do so several weeks ago.  I went to the HP online support site and downloaded a scan doctor programme.  It tells me that I do not have the proper scan software on my system and to download it from the HP website.  It does't take me to the specific software I need but to a list of things I don't have so I downloaded all of this.  I am half way through the setup process for one program and it is asking me to connect the printer/scanner to my computer using a usb cable so that "the settings of your wireless network can be communicated to the printer".  I don't remember getting a usb cable with the printer but if I did I have no idea where it now is.  What are the chances that finding this/buying this will actually solve my problem and is there a way to solve them without the cable?  Any advise would be greatly appreciated.

    Hi @translator82,
    Welcome to the HP Forums!
    I noticed that your HP Deskjet 3520 is telling you to connect it to the computer with a USB cable. I am happy to help you with this connection issue!
    To download the software, please visit this website, HP Deskjet 3520 e-All-in-One Printer Drivers, if you are using Windows 7 or above, it is recommended to use the HP Printer Install Wizard for Windows. If you do not know the Operating System you are using, please visit this website. Whatsmyos.
    In the meantime, page 33 of your printer's user guide has all the options of how to connect this printer. User Guide. For the traditional wireless setup you will need a USB printer cable. Otherwise, you can always try Wireless Direct.
    Hope this helps!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • Question for Deskject 3520 e-all in one re: printing fonts and one sheet preference

    For a Deskjet 3520 e - all in one - printing from Ipad -How do I adjust fonts and make my printer print one side only ?

    HI millchea,
    Are you printing from an app or printing using airprint ? 
    What exactly are you trying to print ? ( email, webpage, ect....)
    Here is an article about how to change font size and enable screen zoom. You can only change font size for mail, calendar, and notes app. For other applications you need to change font size directly from the app itself. Listed in this article are directions and screenshots to help you do this. 
    If I helped you at all it would be great if you clicked the blue kudos star!
    If I solved your post please mark it as solved to help others.
    I'm a printer tech with HP.

  • Any Apps for HP Deskjet 3520 e-all-in-o​ne

    are there any apps on the eprint center that will work on my HP Deskjet 3520 e-all-in-one
    This question was solved.
    View Solution.

    You will not be able to add any apps to that printer.

  • Deskjet 3056A E-all-in-one not printing black ink properly

    Hello, I've had my Deskjet 3056A E-all-in-one printer for 2 years and didn't have any problems until about 3 months ago. My black ink cartridge suddenly stopped printing properly. It started to seem like I needed to replace the ink, so I did, but that did not fix the problem. It still seems like the ink level is really, really low sometimes, but it's a brand new cartridge. I couldn't even align the printhead because the black ink wouldn't print. Then I cleaned the printhead and cleaned the ink smear. When the test papers printed after the cleanings the black ink would only print half of the line of letters or numbers, or it was just choppy and faded. I checked the ink levels and it says both of my ink cartridges are almost full still. I was thinking about replacing the cartridge again, but I don't want to waste the money if it won't fix the problem. The color cartridge works completely fine, just to clarify.

    If the black cartridge is in warranty you could contact HP Phone Support
    Although I am an HP employee, I am speaking for myself and not for HP.
    Twitter: @Ciara_B_HP

  • HP8500A all-in-one can no longer scan thru wireless network but prints fine.

    HP8500A all-in-one can no longer scan thru wireless network but prints fine. Have used this device several times over past 2 years on different wireless networks (at home) but usually at some point I lose wireless scan function but maintain wireless Printing.  I used to be able to reload the software and resolve the issue but now in this "new network" cannot get wireless scanning to work.   Setup software; original software (CD) and current download as well as "Print/Scan Dr"  hangs-up at "network check"  for hours.  Compaq laptop, Dell Laptop, Cell phones and Roku work fine thru network.  Scanner works fine with USB to Laptops.

    Which model Epsons are they?
    I'm assuming you're using Yosemite (OS X 10.10), and that the problem developed when you upgraded from a previous OS.
    (Your profile says 10.6.7 BTW).
    Maybe the scanning function is not compatible with Yosemite.
    You could try a few things:
    reset your wifi system:
    power down everything: modem, router, computer, printer/scanners.
    wait a minute.
    power them all up again, in that order: modem, router, computer, printers. Let each power up completely before going on to the next.
    try a factor reset on your printer/scanner (if there is such a function). You'll have to check your manual for how. If you do that you'll have to enter the wifi password in your printer/scanner, assuming you have security on your network.
    uninstall any printer manufacturer "utilities" that are on your Mac, and try Image Capture again.
    If it is a compatible software issue, you could try VueScan, but I've never needed to use it.

  • My printer, hp photosmart c4200 all-in-one is stuck in scan mode

    My HP printer--HP Photosmart C4200 All-in-One is stuck in scan mode.  I have tried holding start button 60 sec, unplug from power supply, hold while I plug back in with no luck.

    Hi @Bungybill,
    Welcome to the HP Forums!
    I understand that you cannot copy or scan with your HP Photosmart 3110 on Mac. I am happy to help!
    For further assistance, I will need to know:
    The version number of the Mac Operating System. To find the exact version, visit this link. Whatsmyos.
    If the power cable is plugged into a surge protector, or directly to the wall outlet. Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector. This applies to Inkjet printers as well. 
    If you make a copy, and lift the lid, do you see a light come on and the scanner bar move?
    Hope to hear from you soon!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • Officejet Pro 8620 All in One Will No Longer Scan in Color

    Hello,
    I have an Officejet Pro 8620 all in one.  I was scanning a few items last night and the first few items came out in color fine. Then all of the sudden as I continued to scan the next few images would only scan in black and white.  I cannot seem to get the scanner to scan in color again.  How can I fix this?  I did not change any settings or anything while I was scanning so I do not know why the sudden change to black and white?  I am on a Mac computer with all newest operating system etc.  
    Thanks in advance

    Hi there
    I have some more suggestions for you to try. Please try them in order I have written them in.
    Reset the printing system
    Repair disk permissions
    Restart the Mac
    Install the Full Feature Driver here: HP Officejet Pro 8620 e-All-in-One Printer series Full Feature Software and Drivers
    In addition, download this Apple driver: HP Printer Drivers v3.0 for OS X
    That should do the trick!
    Good luck
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • I am struggling to get my Lexmark all-in-one to work with my upgraded MAC

    I am struggling to get my Lexmark all-in-one to work with my upgraded MAC

    Try resetting the printing system
    Mac OS X: How to reset the printing system - Apple Support
    What OSX version?
    Maybe this will help even though it is fro a different Kodak printer
    Kodak esp 3250 wont work
    Typically the manufacturer does not give you all the options on a Mac than on a PC. That is up to the manufacturer who writes the drivers for the printers

  • What all-in one printers work with Lion?

    What all-in-one printers work with Lion?

    kennethfromtoronto wrote:
    For Lion installation the recommendation was not to use the drivers on the included disk, but to download them directly from the Epson support site. I managed to install with no difficulties. Now the NX430 is working seamlessly with 15" MBP (Lion, 10.7.2); 13" MBP (Snow Leopard, 10.6.8); 27" iMac (Snow Leopard, 10.6.8); 15" Dell (Win7). I am sorry to hear that it did not work for you. 
    Ditto, most Printer/scanner manufacturers are getting up to date with Lion compatable drivers now. Most are available from their websites. Some still want to install old scanner software which is PPC so will have to downgrade to SL again, because they won't look for Lion compatable software. I find VueScan still an excellant program which works fine with my 3 yr old Cannon Pixma.

  • Which all-in-one printers work with OSX 10.9

    Which all in one printers work with OSX 10.9?

    See: This article is a comprehensive list of currently supported printer and scanner models and associated software provided by third-party vendors as of 23 January 2014.

  • My C7280 all in one will no longer scan

    My C7280 all in one will no longer scan to my computer. I get an error message that says "no scan options, refer to device documentation to troubleshoot". I have tried all I know. I have re-downloaded the origianl disc software numerous times to no avail. I have gone on line to download the software to no avail. I just get a message that states there was an error in the download.

    Hi,
    Please follow the steps in the following document.
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02450835&cc=ad&dlc=en&lc=en
    Thanks,
    Although I am an HP employee, I am speaking for myself and not for HP.
    --Say "Thanks" by clicking the Kudos Star in the post that helped you.
    --Please mark the post that solves your problem as "Accepted Solution"

Maybe you are looking for