HP Deskjet 3520 Printer Error Code OXB0259858

I have horizontal streaks on my prints. When i try to print a Print Quality Report page I get this error code. I've reinstalled the driver and reinstalled the cartridges. I've reset the printer. Any help?

Hello it1305,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I am sorry to read that you are seeing an error code and also having print quality issues with your Deskjet 3520. I will certainly try to help you!
I have a couple of suggestions for you to troubleshoot, however, if the issue persists I would then recommend calling HP's Technical Support to see about your other options.
First of all, try this guide to reset your printer: An Alphanumeric Code (Example: '0x......' or 'C2......') Displays on the Front Panel When Printing
Then try this guide for the print quality problems: Fixing Ink Streaks, Faded Prints, and Other Common Print Quality Problems
HP Contact Info:
If you are calling within North America, the number is 1-800-474-6836 and for all other regions: click here.
Regards,
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Similar Messages

  • • Hewlett-Packard - Imaging - Null Print - HP Deskjet 3520 series - Error 0x8024200b

    have never been able to install imaging null print update on my destop on win 7/8/8.1 and now update appears on win 10 to update and again failure. Get error message:• Hewlett-Packard  - Imaging - Null Print - HP Deskjet 3520 series - Error 0x8024200b

    Hello , and welcome to the HP Forums! I see you're having issues with an update.  I would like to help! I'd recommend starting with a power reset.  Disconnect the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug the printer back in. Ensure you plug the printer directly to a wall outlet. Make sure to bypass any sort of surge protector or power bar.
    I would also recommend downloading and running the HP Print and Scan Doctor. Once the Doctor has been run, re-run the update. Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!

  • Hp deskjet 3520 print driver won't install

    I bought an HP Deskjet 3520 printer today which was advertised as compatible with OSX 10.7, however when I go to add the printer I get the error "The software for this printer is currently unavailable. Please contact the printer’s manufacturer for the latest software."
    I have the latest driver from HP, I just downloaded it today.
    I deleted my old HP printer from Print & Scan in the System Preferences and uinstalled the old HP printer using the HP uninstall software.
    When adding the printer it said there was an update available from Apple, which it downloaded but then gave the same software unavailable error.
    I can scan with the printer but not print.
    I also have a wireless HP Laser printer on my home network which is a couple of years old.

    Have you tried selecting the software yourself rather than letting it add it for you? This usually helps.
    1) Go to Select Printer Software in the drop down menu.
    2) Type in the name and model of your printer: HP Deskjet 3520.

  • Printer Error Code OXBOOA8DEO

    I'm getting an error code OXBOOA8DEO on my HP 4645 Multifunction Inkjet Printer. Please advise what I can do to fix it. Thanks!

    Hi, Printer Error Code OXBOOA8DEO is an Ink system failure error. Please follow the instructions mentioned in the document  Document Link 
    Although I am an HP employee, I am speaking for myself and not for HP.
    Click the KUDOS star on the left to say 'Thanks'.
    Please mark a reply "ACCEPTED AS SOLUTION" if it solved your problem, so others can find it.

  • HP OfficeJet 7310xi printer error code 0x885e2da6 during startup

    HP OfficeJet 7310xi printer error code 0x885e2da6 during startup, will not progress to head alignment or connecting to the network after running for a long time. Fax light blinks exclamation mark blinks as does the power light after the three clicks during power-up. Ink cartridges never move.

    Contact HP technical support at 800-474-6836 for more options.
    If you live outside the US/Canada Region, please click the link below to get the support number for your region. 
    Country-language selector.
    Please mark the post that solves your issue as "Accept as Solution".
    If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
    I am not a HP employee.

  • HP Deskjet 3520 Prints too small and when trying to Scan it says can't find Computer..

      HP Deskjet 3520 ALL IN ONE & E-PRINTER I have had this printer about 1 year and have never got it to print out things(Some) where it can hardly be read. (I have to have a magnifyng glass to read some of it others fine. The kind I AM NOT ABLE to read are pre-printed materials.  The kind I AM ABLE to read adequately are things I type out on my Computer and then copy or print out it does fine..  Also when attempting to Scan a piece needed to Scan and printer set to Scan it said no Computer could be found. Can someone tell me how to fix these problems. This printer says 'ALL IN ONE e-Printer but it does not fax.

    Hi @mybeaugie 
    I see you are trying to make the font larger on your printed output, but the small text is only happening when you print from programs aside from documents you create. If you are using Internet Explorer you can use this document; Text is Small When Printing from Internet Explorer. If however, you are using AOL you can following these instructions from this post, 'how do i make the text larger'.
    As you can see modifying the text size is going to depend on the program you are using. If you are not using Internet Explore or AOL, can you please post back with more detail. What Browser are you using and what Operating system do you have?  Mac or Windows?
    I understand you are also getting a communication error when you try scanning.  Running the Print and Scan Doctor might help. The HP Print and Scan Doctor is a free utility (tool) that helps to quickly resolve common printing, scanning and connectivity issues including but not limited to:
    Connectivity:
    USB: Verifies that the USB connection from your computer to the HP product is working correctly.
    Network: Verifies that the network connection between your computer and your network is working correctly.
    Device Status Test: Checks for device errors such as out of paper, paper jams, carriage stalls, and paper feed issues, and then provides instructions for fixing the error.
    Driver Check: Checks for missing or corrupt driver files.
    Device Manager: Checks for problems in Device Manager that would prevent printing.
    Device Online: Checks if the product has been paused or set to offline, and then sets the status back to online if necessary.
    Print Queue: Checks for and clears pending print jobs in the print queue (a log of print jobs waiting to print).
    Port Match: Checks the port settings for the HP product.
    Device Conflicts: Checks for conflicts with other drivers, such as other printer brands.
    Ink Issues: Checks the cartridges and ink levels for issues that affect print quality.
    Print Settings: Checks and adjusts the print quality settings.
    Test Print: Prints a test page for print quality evaluation, and provides options for cleaning and aligning the printhead if necessary.
    Scan Tests: Checks the scan mechanism, drivers, and registry entries.
    Source:Try the HP Print and Scan Doctor for Windows
    Click here to download and run the Print and Scan Doctor> www.hp.com/go/tools
    If that does not resolve the issue, post back and let me know if there are any symbols other than green check marks and what they are next to of course. The wrench is not always easy to spot as the wrench and the check mart are in the green circle.
    If you see only green check marks (), the tool did not find any problems.
    If you see green wrenches (), the utility identified an issue and corrected it automatically.
    If you see yellow exclamation points (), the test failed and required user action, but the step was skipped.
    If you see a red X (), follow the on-screen instructions to resolve the issue.
    If the scan issue persists, try the steps in the following document and let me know the outcome of your efforts; An 'An error occurred while communicating with scanning device' or a 'There is no computer connectio...
    Looking forward to hearing from you.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • New Deskjet 3520 - print has changed to draft quality now I have changed connectivity of printer

    Hi,
    Hope that you can help me
    I have a new Deskjet3520 printer. It was working well via USB connection and I was happy with the prints that came from it
    I have now connected now via wireless connection. 
    The system did all the hard work and I was very impressed with how easy it was.
    However, I now have a problem, I have printed off a sheet of text that is all black text with the email address part in blue.The prints are coming out as if in draft format - pale grey with the blue portion coming out pale pink!
    I haven't changed any settings, just trying to print off text.
    Just tried it agin and now thgere are just faint markings on the page
    I have checked the setup and it is definately set for colour printing and NOT for draft
    I only purchased the printer late December and it has HP inks
    Can anyone help me please?

    It sounds like the Deskjet 3520 has developed a print quality issue.  It doesn't appear that the printer has begun using a draft mode, but instead has most likely gotten some ink dried up in the ports of the printhead for the unit.
    Have you tried running the Clean Printhead utility in the Setup menu of the printer?  
    Follow these steps to run an automatic utility to clean the printhead.
    Load letter or A4, unused, plain white paper into the paper tray.
    On the product control panel, press the Down Arrow ( ) to select Settings , and then press OK .
    Press the Down Arrow ( ) to select Tools , and then press OK .
    Press the Down Arrow ( ) to select Clean Printhead , and then press OK . The product cleans the printhead, and then prints a test page.
    I would advise running 3 levels of the clean printhead utility.  Also try performing an ink system reset to this unit.  It may have some ink on the electrical contacts causing the printer to not communicate properly with the cartridges.  For information on how to perform an ink system reset click here.
    As well, there are additional steps for a print quality issue found here.  Let me know how it goes.
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
    I am not an HP employee.

  • HP 7310 all-in-one printer error code 0xb948b1a2

    Printer is not printing or coping.  Error code on printer is 0xb948b1a2.  Been through the help step one of unplugging USB, removing cartridges, turning off printer and it did not work.
    Any suggestions?

    Could be dirty electrical contacts. Pull the power out, and please try the cleaning in "Step 2":  http://h10025.www1.hp.com/ewfrf/wc/document?docnam​e=c01423559&tmp_task=solveCategory&cc=ca&dlc=en&la​...
    *** If my reply was helpful, please click on the "Kudos Thumbs-Up" on the right, as a way to say "Thanks!".
    If this reply also fixed your issue - please click the "Accept as Solution" button, so that others can find the same answer. ***

  • MG series 5320 Cannon printer, error code 6000 appears, can't get rid of it

    Cannon Printer MG5320, Error code appears, can't get rid of it??  can anyone help

    Hi ikovach10,
    To try and resolve the error, if any object is placed in front of the machine, please remove it.  Next, please open the paper output tray gently, then turn the power off and back on.  If the error still appears, please turn off the machine, unplug the power cord from the power supply and leave it unplugged for 10 minutes, then plug it back in and turn it back on.  If the error persists, the printer will require servicing..  Please call or email us using one of the methods on the Contact Us page for servicing options available to you.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • MX860 PRINTER ERROR CODE B200

    I HAVE A MX860 PRINTER WITH AN ERROR CODE OF B200. IT HAPPENED WHILST PRINTING A 50 PAGE PLUS DUPLEX DOCUMENT. WHAT DOES THIS ERROR CODE SIGNIFY?

    Ref my MX860. So... I did NOT wash head or anything. I opened cover, shoved print head manually to left all the way. Rapidly pushed "on" button a bunch of times until unit beeped back at me with funny sounds and went completely dead... Well, before throwing out the second story window, I then rapidly, pushed "on" 5 or 6 times and noticed the print head moved to the right. I shut the deck and waited... and waited... the 'infamous' Canon 'I'm gonna print, no wait, wait, really, I am, in a minute, wait, wait, listen to my sweet sounds, wait, I'm fixin' to, wait". And then it happened! Everything got real quiet and my LCD screen popped up, looking totally normal. So far, it prints, copies and will send a fax. Try it, sure won't hurt, and it seems to have fixed mine :-)

  • HP Deskjet 3520 - printing wrong colours

    I am guilty of having put non-HP ink cartridges in my printer and have recently replaced them with genuine HP cartridges.  But I am getting the wrong colours, it seems to be printing a brown for red, blue for grey etc.  Any clues?  And I have tried resetting the printer and no change

    Welcome to the HP Community , The best option I would say you have with the current print quality issues with your Deskjet 3520, would be to try out the link below. Hopefully checking the settings, ink levels, cleaning the printhead, etc can help correct the color issue. Fixing Print Quality Problems for the HP Deskjet 3520 and HP Deskjet Ink Advantage 3520 e-All-in-One Printer Series  If these steps do not resolve the copy issues, contact HP directly to see if they can send you a replacement unit. If you need to reach HP, here is their contact information:Step 1. Open link: www.hp.com/contacthp/
    Step 2. Enter Product number or select to auto detect
    Step 3. Scroll down to "Still need help? Complete the form to select your contact options"
    Step 4. Scroll down and click on: HP contact options - click on Get phone number
     Case number and phone number appear.  Best wishes to you!Show thanks for my reply to help you today by hitting the "thumbs up" icon below!   

  • HP Deskjet 880c print error on Intel iMac

    Using OS 10.4.8 built-in HP inkjet 3.3 universal binary driver, DeskJet 880c via USB printing fails on two Intel iMac's. Same printer works okay on 10.3 PowerPC G4 eMac with pre-Intel 2.7 driver. HP Support offered driver refresh procedures which do not resolve problem. Printing is fine with some network laser printers, but not with this supposedly 10.4-approved direct USB inkjet printer. Any successes with the new HP 3.3 inkjet driver?
    Intel iMac   Mac OS X (10.4.8)  

    Hello Kalihi-W
    Welcome to Discussions
    http://www.linuxprinting.org/showprinter.cgi?recnum=HP-DeskJet880C
    http://www.linuxprinting.org/macosx/
    Try the Mac OX Forum in the red box, hope this helps!
    Dennis
    17" iMac Intel Core Duo 1.5GB Ram   Mac OS X (10.4.8)   Maxtor 300GB FireWire 2G Nano

  • Error in printing - error code 80070003

    HI,
    We have report viewer control redistributable 2010 and it was working fine. But Recently we install Microsoft updates and now while printing from report viewer we are getting error "error in printing 0x80070003".
    We installed below updates.
    KB2925418
    KB2923392
    <td height="2

    Hi Vikram_u,
    Based on my research, we always receive Windows Update error 80070003 when we check for updates. In this scenario, we need to remove the temporary files that Windows uses to identify updates for our computer. To remove the temporary files, stop the Windows
    Update service, delete the temporary update files, restart the Windows Update service, and then try to check for Windows updates again.
    For more information about Windows Update error 80070003, we can refer to the folllowing link:
    http://windows.microsoft.com/is-is/windows/windows-update-error-80070003#1&1TC=windows-7
    Hope this helps.
    Thanks,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support

  • Dell printer error code: Function Address OxO cuased a protection default....exception code Oxc0000005

    when I want to print something from my Dell printer, and I click on properties, (so I can print in black and white), Firefox now crashes. Never happened in the past.
    I get the following message:
    Function address OxO caused a protection default.
    Exception code Oxc0000005
    how to I fix this.

    Well, Jim, we are going to run through a clean uninstallation and reinstallation of your printer. If this does not work, we are going to take another step down the road, but I will need to know if your PC is manufactured by HP or by another maker. Anywho, moving on with the task at hand ... 
    First if you use a USB cord, make sure to remove it. Do not plug it back in until the software directs you to. Then go through the Devices and Printers, Programs and Features and Device Manager folders and insure that all copies, files, and programs related to the printer are removed. Then as directed, restart the computer. 
    In the START menu type "%temp%" and press ENTER. Here I want you to press Ctrl+A and hit DELETE. Some of the files will not allow you to delete them, skip those files and delete the majority that allows it. 
    Then follow this link to download the full feature software and drivers for the printer: 
    http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&lc=en&dlc=en&product=3866949
    Install that and let me know the result! 
    Have a great day!

  • J6450 printer error code 2753

    I have tried everything and I keep getting the same code 2753. How can i fix this. I'm using Vista.
    Thanks,
    Dave

    Hi Msbkkp,
    I think you are posting on wrong forum. This forum is to discuss CLR programming issue. Please post your problem on the following link.
    http://answers.microsoft.com/en-us.
    Regards,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

Maybe you are looking for