HP Deskjet 845c on windows 7 64bit

Hi evry body
I can't Install my printer on Windows7.
however it was succfull installed on Vista.
help !!
Please, where can i find those drivers! 
This question was solved.
View Solution.

Enzo wrote:
Hi and thanks for writing, testing what you say and always gives me the same error "windows was unable to get a list of devices from windows update. Please try again later" I live in Cuba and my connection is very slow, if I give a direct link where you download it would be easier
OK, it is not quite a direct link but try the following:  go to the Microsoft catalog update site  (you will need to use Internet Explorer, not FIrefox or some other browser).  In the search box select Deskjet 845c then press enter.  There will be a list of four choices, the one you need is the one that is 11.6Mb in size (this is the 64 bit version).
Bob Headrick,  HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Similar Messages

  • Unable to install printer Deskjet 6122 on windows 7 (64bit)

    I bought a new HP Pavilion Model HPE h8-1237c running Windows 7 Professional (64bit). I’m not having any luck at trying to install my old HP Deskjet 6122 printer. Drivers on disk and newer downloaded ones are not compatible with the 64 bit OS. HP suggests installing drivers for Deskjet 990c as alternative. That didn't work either. This new computer only has USB ports and not the old parallel one like my old Pentium 4 Windows XP computer. The printer does have a USB hookup, but windows doesn't install the printer as plug and play since there are no drivers available. I've tried installing it running Windows Virtual PC in XP Mode. The printer install software runs fine in the virtual mode until it gets to the "print test page." At that point the install fails to find any printer at which time it completely reverses the install.  Pffft ! !
    Help please!      I've been going crazy for two days to solve this problem. I haven't even begun to attempt installing my trusty old HP Scanjet 5530 flatbed scanner. I suspect it will be a similar nightmare as is this current printer dilemma.
    Am I destine to have to buy new hardware that’s compatible with windows 7 (64bit)?
    This question was solved.
    View Solution.

    The Deskjet 6122 driver should work fine on Windows 7 using the DEskjet 990c driver, but many folks (myself included) have been having problems getting the Deskjet 990 driver to download from Windows Update.
    You have probably already done the steps here, but if not start with that. If the HP Deskjet 990 does not show up after clicking on Windows Update as shown in step 8 and you get a message that "Windows Update was unable to find a list of devices, try again later" then see the solution here.  If the problem still exists then you can download the driver from the Microsoft Update Catalog site, but this is not very easy to use.  If you need to use the catalog site post back here and I will write up some directions.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • I need a driver for my Deskjet 1280 on Windows 7 64Bit

    I am still having a problem finding a driver for my HP Deskjet 1280 Printer Im using Windows 7 64Bit operating system. Can anyone assist please.
    I need it for my new HP Pavilion P6-2021UK computer.
    Rod
    This question was solved.
    View Solution.

    Install the alternate Deskjet 1220 driver available through Windows Update. 
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Driver(s) to print on HP Laserjet 4000n and HP Deskjet 722C printers for Windows 7 (64bit)

    I'm introducing a Windows 7 64bit) computer in a network of Windows XP (32bit) computers.
    How do I find driver(s) to print on HP Laserjet 4000n and HP Deskjet 722C printers in a network that uses Windows 7 (64bit) and Windows XP (32bit)?  Printer sharing is done using a Windows XP (32bit) base computer.
    Should I load a 64bit driver on the 32bit XP computer for the benefit of the Windows 7 computer or will that mess up the XP computer?
    Thanks

    Hello, the HP laser jet 4000n you install the drivers via windows update procedure.  The HP 722C is not supported under Windows 7 due to it's age.
    Say thanks by clicking the Kudos Thumbs Up to the right in the post.
    If my post resolved your problem, please mark it as an Accepted Solution ...
    I worked for HP but now I'm retired!

  • HP DeskJet 2510 Printer Driver conflict in Windows 7 64bit

    I have just changed my PC from Windows XP Home to a new machine running Windows 7 64bit. I installed the DeskJet 2510 printer from the CD/online and it was fine apart from a lot of errors in the Event Viewer:-
    "The print spooler failed to load a plug-in module C:\Windows\system32\spool\DRIVERS\x64\3\UNIDRVUI.D​LL, error code 0xc1. See the event user data for context information."
    From looking on the web it appeared that the solution may be to reinstall the driver which I did, by uninstalling then completely reinstalling the Basic Device Software. Since reinstalling (several times now!) the HP Print & Scan Doctor is reporting a Printer Driver conflict and suggesting that uninstalling and reinstalling is necessary! As I havealready gone through this loop several times I am wondering if there is a bug somewhere.
    The Test Print page is fine and everything appears to work correctly apart from continuing error messages as above, up to 4 at a time, mainly when printing envelopes from MS Word.
    This question was solved.
    View Solution.

    hhhuummmm....  
    Maybe I have missed a step. Let's try opening the Device and printers, clicking on the printer so the Printer server Properties option appears, click server Printer server Properties, but then click back on the Device and Printers window. Delete the printer icon from here, then return to the Printer server Properties window and delete the driver.
    If this works I am sorry I didn't think of it sooner
    Keep me posted! 
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • Deskjet f4500 not compactable with windows 7 64bit pro

    hi there i have a hp printer f4500 i trying to install software and drivers for my printer i have a  hp desktop i running windows 7 64bit pro i went on to hp to download it  but it say not compactable with my o/s any help please
    This question was solved.
    View Solution.

    Hi,
    The printer is compatible with Windwos 7 64-bit.
    You may download the software from the following link:
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=al-73705-3&cc=us&dlc=en&lc=en&...
    If you install the printer via USB, be sure not to plug the USB till the installation guide you to do so.
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • Laserjet 4200 drivers for Windows 7 64bit

    ok...ive upgraded to Windows 7 64bit to test on our network and come to find HP is lacking on the drivers for my laserjet!!!
    I need a solution for this.
    thank you

    In Windows 7 Prof 64 bit I got my HP 4200DTN to work kind of. In Windows install a network printer, have it look for the driver in Windows 7 prof 64 bit. Now with that said it will make it print, duplex  BUT if you have an envelope feeder like I do you are SOL, THANKS TO HP. Their solutions is to buy one of their cheap Chinese printers. I will not do that because the HP 4200DTN will print and does a good job in my network. Before I buy one of their cheap Chinese piece of crap I will get rid of Windows. Still trying to find a work around. The HP printer driver web page has a Universal Printer Driver for the HP 4200 but a lot of features are not supported. Tray 1 envelope feeder ( no support ) you can take the feeder off and feed tray 1 by hand to print envelopes HANDY!!! Just like starting your car with a crank!!! Would not hurt HP to provide drivers for the HP4200DTN, with the envelope feeder. They are so busy trying to SELL, SELL, SELL the new Chinese cheap crap. HP had a problem with their DeskJets in the 90's, paper feed rollers and gears broke. They talked me into a HP 8600Pro Premium, going to send it back. I am going to try my hand at fixing my HP OfficeJet 7310 All-In-One that quit working. It has been a good printer since purchase 6 years ago.  I puchased a parts machine today. With any kind of luck I will have the needed parts to make my HP 7310 live. Don't need their cheap Chinese Junk. They don't want to have the service they used to provide. Spend all day on the phone and get transfered all over the world and back again, no help. Sick of it!

  • Connecting HP990Cse via print sever in Windows 7 64bit

    I want to install the drivers for an HP990Cse printer which is connected through a printer server built into my WD Netcenter network drive. Windows 7 (64bit) can find the printer but not the driver. Also, this printer is not found in the list provided in Windows. It asks for the location of the driver files (browse button), however, I am unable to download any driver files from the HP website. All they have is a wizard to allow hookup via USB or instruct the user to simply hook the printer to Windows and let it provide the driver. I am not hooking up via USB, so I not sure what to do.
    When installing a Brother printer, I had no issue since I could download the driver files, put them in a folder and then point Windows to that folder. Where can I get the driver files for this printer or what procedure should I use to install this printer?
    Thanks,
    This question was solved.
    View Solution.

    I will answer this question myself for the benefit of anyone who may find themselves in this position. Following some advice I found on the Internet. I did the following:
    I installed the printer as a local printer on the USB port allowing Windows to provide the driver. It worked find plugged into a USB port.
    I then moved the printer back to the print server in the NetCenter.
    I then went into the printer driver on the ports tab and added a new port with the network path for the printer. For example \\printer_server_name\printers\DESKJET-990C.
    This did not work, however. So I went to the Network and Sharing Center and chose the option to View Computers and Devices which showed the print server. I double clicked on the print server which then displayed the connected printer. I double clicked on the printer to connect to it. I got a message saying that the driver could not be found. I clicked OK to install the driver. When the driver list appeared, I selected HP in the left column and guess what? The 990C printer driver and a bunch more HP printer drivers were listed. I selected the 990C and everything worked fine.
    I not sure if installing the printer locally caused Windows to populate the list with more HP drivers, but it seems as if it did because those drivers were not in the list before.

  • My iPhone 4 will no longer back up in iTunes after my upgrade to Windows 7 64bit.

    I used to have Windows XP 32bit and everything worked fine.
    I upgraded to Windows 7 64bit and installed iTunes 64bit (I've also tried running the installer as administrator [in the compatibility properties]).
    iTunes will recognise it with no problems and I can drag and drop anything I want to the iPhone, but I can't back up.
    Software versions: iTunes v10.4.0.80, iPhone 4.3.5.
    When I try to back up, the loading bar with either:
    Have a loading bar with diagonal lines forever or,
    it will start moving and freeze.
    I've tried leaving the process for hours, but to no avail.
    While the back up is being attempted, iTunes still retains full functionality.
    I would exit by sliding the bar on my iPhone (iTunes will retain the loading bars as if frozen) and then unplug it. At this point iTunes takes a few seconds to drop the loading bar altogether, and the little screen will reset to normal functionality.
    I believe this may be a iTunes-Windows thing as I did the following with my old laptop (Windows XP 32bit):
    Installed iTunes for the first time.
    Went into preferences and disabled the automatic backup option.
    Plugged in the iPhone, right-click "back up".
    The back up took less than 5 minutes.
    I don't understand why my main PC can't back up my iPhone.
    Can anyone help please?
    I've tried researching the same problems and I've ended up doing the following:
    Reinstalling iTunes,
    Tried changing the iTunes installation folder to "Program Files" instead of "Program Files (x86)",
    Deleting all contents from: "C:\Users\[Username]\AppData\Roaming\Apple Computer\MobileSync\Backup",
    Deleting the apps from my phone in case there are corrupt apps (doesn't make sense though as it backed up fine on my old laptop).
    I would appreciate any suggestions!
    Kind regards,
    Will

    Hi there,
    I have the same issue. Usually hangs after 10K od sometimes after 18MB of backup file.
    Config: iTunes 10.4., Win 7 64bit, iPhone 4 with iOS 4.3.3
    I tried all of these without success:
    - deleted backups via iTunes / Preferences
    - deleted backups from sync folder
    - created a new admin user and tried to sync
    - reinstalled iTunes
    - ran all Windows updates, restarted, reinstalled iTunes
    - ran iTunes / Diagnostics (says everything okay, only info which is strange: diag says I am not a admin user, which is not correct)
    Nothing helped. Who can help. I hope someone from Apple can take care, as I seem not to be the only one. Actually iTunes is the worst part about iPhone. Hope with iOS 5 and Cloud sync to get rid of iTunes.
    Any hints welcome,
    Cheers,
    Miguel-KA

  • Install JMF on Windows 7 64bit

    Dear all,
    After a lot of struggling (and a really mean a lot), I finally got jmf to work on Windows 7 64bit. I figured that I can better not let this information go to waste, so that's why I'm posting it here. I didn't really test the full capabilities of jmf on my platform yet, in fact I only tested those features that I needed for my application. As such I am able to successfully capture and record video clips from my build in webcam of my laptop.
    First let me describe my platform:
    Laptop: Samsung R590 (JS01)
    Processor: I5 450M (64bit)
    OS: Windows 7 64bit
    Webcam: build in
    Secondly I want to apologize in advance if the method below doesn't work for you. The reason for that can be that I had to try so many different things before I finally got it to work, so I'm not really sure which steps are necessary and which ones are not. So I tried to make a guide that only includes the necessary steps, but in reality I tried so much more, so if this tutorial doesn't work for you, please give me feedback, and we'll try to figure it out. :)
    Step one: installation of java JRE/JDK
    JMF will never work on a 64bit JRE/JDK, plain and simple because JMF is too old and doesn't support a 64bit JRE/JDK. Thus your first step has to be to install a 32 bit JRE/JDK on your system. (I uninstalled my 64 bit JRE/JDK first, but I don't now whether or not this is necessary)
    Step two: download JMF with windows performance pack
    Go to the jmf site and download the most recent jmf version, with windows performance pack. (This is - and will probably be forever - version 2.1.1e)
    The link to the website is currently: [https://cds.sun.com/is-bin/INTERSHOP.enfinity/WFS/CDS-CDS_Developer-Site/en_US/-/USD/ViewProductDetail-Start?ProductRef=7372-jmf-2.1.1e-oth-JPR@CDS-CDS_Developer]
    Step three: install JMF
    Install the file you just downloaded in the normal way you would install any other program. But chose as installation path: "C:\JMF2.1.1e"
    I think this is necessary because of the strict security policy in Windows 7, if you don't do this, I guess jmf won't be able to store capture device settings to your local hard drive. (But again, I'm not completely sure here, please verify this if possible)
    After the installation, you don't have to do anything special to get jmf to work, so you don't manually have to set the JMFDIR, PATH and CLASSPATH (as is explained at the sun website), just skip those steps.
    After the installation, reboot your pc.
    Remark: I recommend you to install jmf as an administrator (but I don't now whether or not this is necessary). To do this, right click the installation file and select: "run as administrator'.
    *Step four: register your capture devices*
    First make sure that all your devices are working properly, I recommend you to use a program like Skype or something just to check whether your microphone is working or not.
    Secondly, open jmfstudio, select 'file > preferences > capture devices', and press the button 'detect capture devices'. Normally you will have to wait for a couple of minutes now (because the determination of all the available video formats takes quite a while). Afterwards jmf should have found all of your devices, that usually looks something like this:
    DirectSoundCapture
    JavaSound audio capture
    vfw:Microsoft WDM Image Capture (Win32):0
    But this can vary according to your configuration off course. :)
    *Step four: test your capture devices*
    In jmfstudio, select 'file > capture' and select the video and audio combo and see if your webcam settings work. You should now be able to view and hear yourself.
    *Step five: that's it, enjoy your jmf*
    *Remarks:*
    My development platform is currently netbeans 6.9.1 and I am able to write code, build it and run it with netbeans. I can also just run normal *.jar files
    *Troubleshoot:*
    If you get a dialog screen when starting your video capture device that looks like this: [http://www.alexandria.nu/ai/machine_vision/dual_cameras/SelectDevice.gif]
    (With off course another name for the capture device), then that means that your capturing device is currently occupied by another program and you can't currently use it.
    To solve this, make sure that no other application is using the webcam. For me even this was insufficient, but I managed to solve this by installing the latest drivers for my webcam from the manufacturing site of my laptop.
    I sincerely hope this tutorial can be of any use for someone, feel free to give me comments/suggestions. And please post here if this works for you or not.
    Greetings, Molly

    Hi
    sure I follow each of your steps, I uninstall all java verisones and installed a new java version 32-bit, I installed JMF in "C: \ JMF2.1.1e".
    when all installing finished, works fine JMF only once, I do the tests, recognizes the device; shows the video, but when I close and open again JStudio don't works throws error, and therefore my apliación not working, always returns null the device

  • Sequencing Adobe Photoshop CS5 on Windows 7 64bit

    Hello
    am sequencing the Adobe Photoshop CS5 on Windows 7 64bit build, The installation had ended with Exit Code: 6 - Silent workflow completed with errors.
    The error summary log is as shown below
    Exit Code: 6
    -------------------------------------- Summary --------------------------------------
    - 0 fatal error(s), 6 error(s), 3 warning(s)
    WARNING: OS requirements not met for {667C8B6C-3EAF-4646-A8EC-D85CCC4D3D84}
    WARNING: OS requirements not met for {7DFEBBA4-81E1-425B-BBAA-06E9E5BBD97E}
    WARNING: 1 ARKServiceControl::StartService: Service not started/stopped SwitchBoard. Current State: 0 Exit Code: 0 Service Specific Exit Code: 0
    ERROR: 548 Unable to move file at "C:\Program Files (x86)\Common Files\Adobe\Installers\adobeTemp\{2EBE92C3-F9D8-48B5-A32B-04FA5D1709FA}\_497_ecaa88f7fa0b f610a5a26cf545dcd3aa" to "C:\Windows\System32\Macromed\Flash\FlashPlayerTrust\AdobeXMPFileInfoCS5.cfg" Error 3 The system cannot find the path specified.
    ERROR: 548 Command ARKMoveFileCommand failed.
    ERROR: 548 Unable to delete file copy at "C:\Windows\System32\Macromed\Flash\FlashPlayerTrust\AdobeXMPFileInfoCS5.cfg" Error 2 The system cannot find the file specified.
    ERROR: 548 Error rolling back command ARKMoveFileCommand
    ERROR: The following payload errors were found during install:
    ERROR:  - Adobe XMP Panels CS5: Install failed
    but when am installing it normally on the same build it installs successfully without any errors.
    does any one tried to sequence photoshop CS5 application?
    Please suggest your valuable inputs on this?
    Regards,
    Srikanth

    Looks like the first two warnings are security level warnings meaning that your silent install will not grant the correct security level for what ever reason. I suspect it needs admin level maybe?
    Here is a link. Read #8 as it has to do with silent installs. The log will give you more hints on what you did wrong.
    http://kb2.adobe.com/cps/829/cpsid_82942.html

  • Broadcom 802.11n Network Adapter not working on Windows 7 64bit

    As the title suggests, my laptop (Alienware m17x) is installed with the Broadcom 802.11n Network Adapter and Windows 7 64bit Home Premium.  I have had several other driver incompatibility issues with Windows 7, but those I have slowly been able to resolve.  This however just cropped up after two months of successful use.  Yesterday it started failing to connect to the internet, telling me that no wireless connections are available.  I live in a dorm, and everyone else on my floor has successful wireless, including my Ipod Touch, PS3 and XBox 360.  I called Alienware/Dell Support and we spent hours trying to fix the problem and all look well until I rebooted my laptop this morning and the same issue reappeared.  When I reboot my laptop, all I get is a notification that no networks appear in range.  If I uninstall the broadcom chip and let windows install it after a boot up it works until the machine is rebooted a second time.  I have tried over a dozen windows 7 drivers for the chip, and about half a dozen vista drivers and they all have the same results, works on the first boot, fails every time after that 

    Just registered to say, on an Alienware M17x system as well running Windows 7 Ultimate, here is a link to a solution that worked exactly for me:
    http://forum.notebookreview.com/alienware/436486-guide-properly-solve-wireless-connection-problems-m17x.html
    All I did was section I.a. If the link is down, I copied the only section that I needed to follow out of this guide, in order to get my wireless to work repeatedly without having to uninstall the wireless driver every single reboot. Now it works perfectly,
    already connected to a wireless network on startup.
    I.a. Disable Device sleep on disconnect
    Some newer Nvidia Ethernet drivers have a feature called Device sleep on disconnect. This is the culprit. Normally, it should only put the Ethernet adapter to sleep when the cable is disconnected, but it's buggy and thus kills the wireless connection as
    well.
    Follow these steps to disable this feature on your Nvidia Ethernet Adapter:
    1. Open the Windows Device Manager by hitting Win+Pause, then click on Device Manager on the left side.
    2. Double-click on Network adapters.
    3. Double-click on NVIDIA nForce Networking Controller (yes, that's the wired Ethernet adapter indeed).
    4. Click on the Advanced tab.
    5. Select Device sleep on disconnect.
    6. Set the Value to Disabled. 
    7. Click OK and wireless should work again (might require a reboot afterwards, but probably not).

  • Home Sharing will not work with my Windows 8 64bit with new itunes.  All of my Apple TVs will not see my library and my iphones will not function with the "Remote" App.  They all did before.  Only thing that has changed is new PC/itunes.  Any Ideas?

    Installed a new Windows PC on my home network.  PC is Windows 8/64bit. with latest version of itunes 11.1.4.62 for 64bit.  My itunes works, but I can not get Home Sharing to function now.  None of my Apple TV's can see my computer library and prompt me to turn it on.  All of my iphones, pods, pad, can not use the "Remote" app.  When you prompt your phone in Remote App to "add library" and you get the code....iTunes doesnt give you the remote screen where you can enter the code.  I have reloaded iTunes, reset my router, updated all devices.  You can turn on "Home Sharing" on iTunes, but then it closes and doesnt seem to link my devices like it use to.  Also, when the new version of iTunes is up on my PC, you can see the other devices to AirPlay to like you could before.  However, I can send items from my iphone to stream to an Apple TV, I just cant link them all like I could before and control the music playing to multiple Apple TV.  Growing fustrated.  Any ideas, would be helpful.

    Cunning1_
    You are a legend!!  I have spent countless hours uninstalling, reinstalling itunes, playing with firewall settings, reading articles on this problem!!  I only have to un-sync my iphone 5 and then the airplay icon magically appeared!!!  Maybe I have too many devices syncing via wi-fi, or maybe it is the Iphone syncing??
    Whatever - one step and now I can enjoy my music through my house again!
    Thank you, Thank you, Thank you 

  • Hp 15 -f039wm drivers for windows 7 64bits

    I downgraded my pc from windows 8.1 to windows 7 64bits. I  and having problems getting drivers for my PC. Can anyone help me with a link where I can locate drivers. Thnx.

    Hi spyrozack
    Install the wifi driver, then use the links in the links of the following messages:
    Realtek RTL8188EE  Wifi
    http://ftp.hp.com/pub/softpaq/sp66001-66500/sp6619​0.exe
    http://h30434.www3.hp.com/t5/Notebook-Operating-Sy​stems-and-Software/HP-15-f039wm-Windows-7-Driver-P​...
    http://h30434.www3.hp.com/t5/Notebook-Operating-Sy​stems-and-Software/HP-15-f039wm-Windows-7-ETHERNET​...

  • The keyboard and trackpad on MacBook Air (13-inch, Mid 2013) computers may stop functioning at the Personalize step when installing Windows 7 64bit

    The keyboard and trackpad on MacBook Air (13-inch, Mid 2013) computers may stop functioning at the Personalize step when installing Windows 7 64bit.

    1. Reset PRAM.  http://support.apple.com/kb/PH4405
    2. Reset SMC.     http://support.apple.com/kb/HT3964
        Choose the method for:
        "Resetting SMC on portables with a battery you should not remove on your own".
    If this does not help, contact Apple.

Maybe you are looking for

  • Working with Folders and Sub-Folders

    I'm updating this big site, and its pages are organized into folders. I've only ever organized my images and .pdf files with folders not my html files but all my prior sites have never had so many files as this one. It's starting to drive me crazy th

  • Flash Effect Help

    Hey guys, First time poster here on the Adobe forums and I apologise if this is the wrong sub section for this kind of stuff. I'm currently doing Flash in one of my courses at university, and for one of the projects we have to create an aphorism bann

  • Vine download won't completely load

    I only have two pages of apps, so I know its not about space. Is there anything else that would prevent the Vine app to not load? I thought perhaps it was just that particular app so I went and bought the camera roll version--same problem.

  • I have a 32 gig iPad and downloaded xmotion gps. It works on my iPhone but not iPad? Is it compatible?

    I downloaded motion x gps app that works fine on my iPhone but no sat signal on my iPad. Is this a setting on the iPad or is it not possible?

  • Ipad mail retrieve from Trash

    I can delete mail from the iPad, but how do I retrieve mail from the trash? The trash icon is grayed out. Also, spell check. How does that work on the iPad? Thank you. -Phyllis