HP Deskjet 900 series, 2 sided printing attachment driver

I'm still using a Deskjet 952c series because it prints beautifully. I had a 970Cse which came with the 2-sided printing attachment. It died but the attachment is still fully functional, and it fits the 952. Is there a driver just for the attachment or a 952c driver that includes the attachment? I've had absolutely no problem using the XP driver with Windows 7 32bit.

The duplex printing attachment must be enabled in the driver as shown in the Vista/Windows 7 Duplex Printing Troubleshooting Guide here.
Bob Headrick,  HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Similar Messages

  • My hp deskjet 1510 series does not print when connected to my hplap top (windows Vista),

    My hp deskjet 1510 series does not print when connected to my hp lap top (windows Vista), it says the printer is not active, although it is default printer, connected and on. However, it does work when connected to the (also HP) lap top (windows 8) of my husband.  I did everything the hp print and scan doctor advised and also what I could find at HP support (like switch of fire walls, reinstall everything, check printpooler ec etc)... it still does nothing except that I managed to print a diagnostic print which should give information about the condition,  but it only gives numbers and letters like : 11. SN = [Edited for Personal Information] Yr  12 PER = 05YR etc, that does not really help me :-). It won't print any testpages.  H E L P!!!

    Hello Elisabeeth,
    Welcome to the HP Forums!
    I understand you're unable to print using the Deskjet 1510. I will do my best to assist you! When you reinstall the HP software, did the installation state it was complete?
    I would start off by following this HP document on 'Printer is offline' Message Displays on the Computer and the Printer Will Not Print. From this document, please make sure you check the connection type and the ports.
    Please post your results, as I will be looking forward to hearing from you.
    I worked on behalf of HP.

  • Hp 61 cartridge (refill?)/hp deskjet 1050, series J410, landfill printer/scanner

    I bought an hp deskjet 1050 (J410 series) printer/scanner, about 3-4 weeks ago, at Future Shop, for $29.99. I used all the ink in the hp 61 black ink cartridge, called a local outlet for a large cartridge refilling business & was told they could refill it. They did.
    Now, the printer/scanner is displaying the attached message & refusing to print.
    What is the opposite of "green"? Has hp not heard the terms "reduce, reuse and recycle"?
    Is hp really so short-sighted that they hired engineers to design printers and cartridges so that the printer won't work after the ink in a cartridge is used?
    A new hp deskjet 1050 printer/scanner costs $29.99 at Future Shop. An hp 61 black inkjet cartridge costs $19.99. Do they really intend for the printer to go in a landfill after the ink is used? I used to think hp produced quality products - since I bought my first hp 21 calculator over 35 years ago.
    I tried getting rid of the warning message (with the "close" button disabled) by starting Task Manager and ending the task; but the printer still won't print. Do you know of another workaround?
    At this point, I'm thinking of returning the printer & shopping for a better alternative.
    Thanks.
    This question was solved.
    View Solution.

    I would suggest if the message comes up again just say "no".   While HP does not prohibit refilling they are trying to crack down on counterfeiting, where refilled/reman cartridges are sold as genuine HP.
    BTW, the refill place likely took your used-once cartridge and gave you a different replacement.  If you had gotten your cartridge back the printer would have recognized it and not shown this message.  I would suggest you contact the refiller for a replacement if cleaning the cartridge contacts as shown here (for a different series, but same principle) does not resolve the issue.
    On a related note, I once donated a printer to the local high school.  Some time later I got a call from the teacher that it was not working properly.  They had replaced the #57 cartridge with a refilled one that had bad color in yellow (now green).  We got a replacement and had one of the colors missing.  Finally the third replacement worked.  I asked why they bought refills and the teacher said they were cheaper.  I asked if they were 1/3 the price....  You do get what you pay for.  
    BTW, I do not work for HP or represent them, I am just a volunteer on this board.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Deskjet 3800 series Image reversed print when shared over IP XP Host Vista client

    Deskjet 3845 color printer
    OK when printing direct from XP Host via USB.
    OK Printing direct from Vista via USB.
    When printing from Vista client to shared XP host image is reversed and color planes are disabled.
    Using Vista driver that shipped with OS.
    Changed XP software from 3845 driver to generic 3800 series no change in behavior.
    Believe problem is with Vista 3845 Driver direct printing OK Network printing is bad.

    I am having very similar challenge with Vista 64 home premium and laserjet 1020. The Vista 64 spooler file seems to have become corrupted, since the printer worked for several months with vista before the error messages and continues to work fine with my old computer running xp pro. HP chat sessions (14 hours) have been entertaining but unhelpful, and phone support insists that the spooler error is with the printer, which is more than 6 months old. I have rebooted, reinitialized the printer from Vista and dos, reloaded and reinstalled printer drivers.  Did you get a fix for this?

  • Hp deskjet 1510 series won't print

    We mloved recently to  la Gomera (Canarian isle)  and there I bought a hp deskjet 1510. It won't print when connected to my lap top, also HP with Windows vista, although it is connected, is on, and is the default printer. I tried everything the print and scan doctor suggested (like switch off fire wall, chekc print ooler, remove and reinstall driver and software  etc) and everything else I found in support from HP. it still does not print. When connected to our other lap top, also HP but with windows 7, it works fine. The only thing I managed to print is a diagnostic page but it give only numbers and letters like SN = CN39a19mmp05yr 21 PG =81 12 PER = -5yr 22 FB = 0/0 etc. Tjat does nog help me :-(.  does anybody know how to solve this?
    This question was solved.
    View Solution.

    Hello, 
    Please try the below mentioned steps..
    Click START > Device and Printer > Add a Printer > Add a local printer >
    ( if the printer is connected with USB )
    Select "Use Existing Port " then Virtual USB from drop down  , Click NEXT, in the Manufacturing list , select HP / Hewlett packard, and from the right pane , select Deskjet 6980 and complete the wizard
    Regards,
    Jabzi
    Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
    Click "Accept as Solution" if it solved your problem, so others can find it.
    Although I am an HP employee, I am speaking for myself and not for HP.

  • HP Deskjet 3510 Series (3512) only printing in black and yellow.

    Hello.
    My HP Deskjet 3510 recently ran out of ink (or so I thought.)  I purchased new 61xl color and black cartridges and replaced them.  However, the printer is only printing in black or yellow.  I am unable to get any red, blue, or grayscale. 
    I have cleaned the printer heads several times, and alligned the printer several times but this has not helped the problem. 
    I am looking for any suggestions on what I can do to get my printer working once again.
    Thank you.
    Sara C.

    Hello @sarajo0531 , and welcome to the HP Forums, I hope you enjoy your experience!
    I see you're running into print output issues.  I would like to help!
    I'd start by removing the ink cartridges, and performing a power reset on the printer.  Disconnect the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug the printer back in. Ensure you plug the printer directly to a wall outlet. Make sure to bypass any sort of surge protector or power bar.
    I would then suggest following the steps laid out in this document:
    Fixing Print Quality Problems for the HP Deskjet 3510 and Deskjet Ink Advantage 3510 e-All-in-One Pr...
    Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
    Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
    Jamieson
    I work on behalf of HP
    "Remember, I'm pulling for you, we're all in this together!" - Red Green.

  • Double sided printing on HP officejet 7410 and windows 8.1

    I recently had to upgrade to a new computer with Windows 8.1 and after downloading the driver for my old HP Officejet 7410 All in One WITH the double sided printing attachment, I cannot get it to print on both sides automatically, as in the printer setup there is only "print one page" or manually print double sided.  I continue to get the manual print instructions to turn the pages over.  I have downloaded the driver twice and cannot find an option for the double sided driver.  The printer still prints double sided automatically with the other old computer i have.
       Help ~ wanting to print double sided!

    I have the same problem.  I have the HP Officejet 7410 that supports automatic double sided printing.  I recently upgraded to Windows 8.1.  I installed the most recent software and drivers from the HP support site.  But automatic double sided printing is no longer an option.  What's up with that HP?  How about a fix?

  • I have a new macbook pro and an HP Deskjet D2500 series printer and i can not figure out how to do double sided (duplex) printing! any help?

    Does anyone know how to set up print so that it comes out double sided with the macbook pro??

    How you enable double-sided printing can depend on the applications from whick you wish to print. Example: if I print to my HP PhotoSmart  from Safari, I get this print dialog box:
    (Edit: OOPS! Note that I forgot to switch printers when i took the scene-shots, so ignore the "Brother" reference. It's should look the same for your HP.
    Note the selection labled "Safari" near the bottom. If I change that form "safari to "Layout: I get this:
    Note the option for two-sided printing appears for your selection. If I print from Word, the box is different:
    The "Copies & Pages" option can be changed to "Layout" when you click it, again allowing the selection of two-sided printing.
    If you tell us what applciaiton is vexing you, we may be able to give better-focused information.
    A

  • I have an HP Deskjet D4200 series printer that ised with my iBook G4.  I would like to use it with my new MacBook Pro that I just purchased.  Is there anyway to do this?  When I try to install the driver using the CD, I get the message, "can not open the

    I have a HP Deskjet D4200 series printer that I used with my iBook G4 and I recently purchased a new MacBook Pro 13.5" and I would like to use this printer with my new lap top.  When I use the disc to try to install the printer driver, I get a message that "I can't open the application HP Installer because the Power PC applications are no longer supported.  I am not sure what all that means but is there any way to use this printer with my new computer?
    Thanks

    It would help to post this in a more proper form. This is for the iTunes family of stores.

  • HP Deskjet 3050 All-in-One Printer series - J6

    HP Deskjet 3050 All-in-One Printer series - J6? what a load 0f rubbish,only one place for this the bin!
    Purchased less than a year ago countless problems with wireless reinstaled more times than I can think and now paper jams so off to the bin, never to buy HP products again, being disabled is hard enough but having to  going shopping for a new printer this I could do without. thank you HP.
    Brian

    I am sorry to hear that you are having that issue with the printer. If the printer is under a year old from the date of purchase, please call into HP Total care. The printer comes with a factory warranty that gives the owner free tech support on the product. Paper jams are a hardware issue. If all troubleshooting steps are done on the phone with the agent and the product is still not working. That agent who is assisting you will be able to give further options on what can be done. The number for US and Canada customers is 800-474-6836. Customers in other countries can find contact information here. I hope that this helps.
    I am a former employee of HP...
    How do I give Kudos?| How do I mark a post as Solved?

  • HP Deskjet 970cxi two sided printing

    I've got an HP Deskjet 970cxi printer connected to a print server on my LAN.
    I'm able to print to it from Leopard with no problems. Just works with the Leopard "HP Deskjet 970C - Gutenprint v5.1.3 drivers".
    However, I can't figure out how to enable the duplex unit in the Leopard drivers.
    When I goto the layout settings in the printer driver the "two sided" printing option is grey out.
    How can I tell the drivers that I have a duplex unit to enable this option?
    Any suggestions?
    Thanks,
    Steve

    I have the same printer connected to a D-Link DP-300U print server. I get full access to the printer's settings, including duplex and photo settings, by using the HPIJS driver, which is an open source driver put out by HP. You can find a link to the OS X version of the driver at:
    http://www.linuxfoundation.org/en/OpenPrinting/MacOSX/hpijs
    Good luck.
    David

  • Two-sided printing with HP deskjet 1050A?

    Hi,
    How to complete two-sided printing with HP deskjet 1050A? I looked through the properties / options menu at print preview but no options were available for this function.
    Please advise.
    Thanks,
    Patrick

    Hello,
    You should be able to print on two sides using this method for your product:
    NOTE:You can print your document on both sides of the paper, instead of just one side. Click on the Advanced button on the Paper/Quality or Layout tab. From the Pages to Print drop-down menu select Print Odd Pages Only . Click OK to print. After the odd numbered pages of the document have been printed, remove the document from the output tray. Reload the paper in the input tray with the blank side facing up. Return to the Pages to Print drop-down menu and then select Print Even Pages Only . Click OK to print.
    Reference link:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02250284&tmp_task=useCategory&cc=us&dlc=en&lang...
    Hope this helps.
    I work for HP.

  • HOW CAN I DOUBLE SIDED PRINTING ON MY HP ENVY 4500 SERIES PRINTER

    I  recently bought my HP ENVY 4500 series printer and love it.  The only problem I have is I can seem to work out how to do double sided printing, cant see any options and the booklet doesnt tell me...maybe  I am missing something. Please help! I hate wasting paper

    have you already installed the software for the MAC?
    what is the OSX version of your MAC?

  • HT3669 After update the printer HP Deskjet F300 Series stopped working properly

    I would like to notify you that i use drivers for HP Deskjet F300 Series Version 1.0.1 and after this update the version upgraded in version 2.0.0 and the printer stopped working properly. I removed from library all folder of HP drivers and then i re-install old version from .dmg file from this official link of HP and now it works properly again.

    Hi ds5710,
    I understand you have a Deskjet F300 series printer that is currently telling you it's offline and won't print. I will certainly do my best to assist you in resolving this issue.
    If you're using Windows, I would suggest you start by downloading and running the HP Print and Scan Doctor as it should be able to rectify whatever is causing your printer to show as offline.
    If that doesn't resolve your issue, or you're using a Mac, please get back to me with which version of Windows or Mac that you're using and I will certainly see what else we can do!
    Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    **MissTeriLynn**
    I work on behalf of HP

  • I keep getting an error message "To open X1100 Series Button Monitor, you need to install Rosetta".  I used to have a Lexmark X1100 printer attached to this Mac.  How can I stop this error?

    I just had a new hard drive put in my IMac and ever since I got it home this error pops up "To open X1100 Series Button Monitor, you need to install Rosetta.  Would you like to install it now?  Two years ago I had a Lexmark printer attached to this Mac.  I'm not sure why this is happening as I believe I have move all Lexmark files to the Trash bin.  Does anyone know how I can stop getting this error?  Thanks.

    Check in System Preferences> Printers to see if the Lexmark is still showing in your printer list. If it is, click it and hit the minus button to remove it.
    If it's not showing, when you trashed the Lexmark software, did you notice if there was an uninstall file? Sometimes just moving unwanted programs to the trash can doesn't get rid of all of the installed software and the software manufacturers include an uninstall option to remove those 'hidden additional files'.
    Check support at Lexmark's web site to see if they offer a solution.

Maybe you are looking for