HP Deskjet all in one printer 3050A J611 n. Not printing

Disconnected printer for a week. When reconnected printing very slow and laboured. Cleaned print head, and paper feed. Restored default and set up from scratch. Wireless network results printout - no problem found, congratulations on successful setup of your wireless printer. I try to send documents from tablet, message box confirms number of pages being sent then nothing

Hello Aljones,
Welcome to the HP Support Forums!
I see that you have been working hard trying to get the Deskjet 3050a working once again on your Tablet. What is the type of Tablet and the Operating System installed on it?
Are you able to print with the HP ePrint Mobile App? Getting Started with HP ePrint Mobile Apps<---
Cheers,
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Similar Messages

  • HP 2050 deskjet all in one -- will scan but won't print from this computer

    My deskjet 2050 will scan from both of my macbook computers, but will only print from one.  It gives an "on hold" message whenever I print from this computer.  Then I hit "resume" and it says "nothing is being held."  I have already downloaded and re-installed the driver, and it didn't make any difference.
    It prints fine from the other computer, but it's a pain to have that limitation.
    Thanks in advance for your time.

    Hello @CazzoInMano , and welcome to the HP Forums, I hope you enjoy your experience!
    I see you're running into print issues.  I would like to help with that!
    What version of mac are you using?
    I would suggest deleting the printer from your print system, using this document: Uninstalling the Printer Software.
    Once you have deleted it, I would suggest verifying and repairing the disk permissions: About Disk Utility's Repair Disk Permissions feature.
    I would also suggest running your Apple updates:  OS X: Updating OS X and Mac App Store apps
    After the updates, I would recommend reinstalling the HP Deskjet 2050 All-in-One Printer.
    Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
    Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
    Jamieson
    I work on behalf of HP
    "Remember, I'm pulling for you, we're all in this together!" - Red Green.

  • Have Photosmart Premium All-in-one, model c309a. Will not print a test page as the default printer.

    Have gone through all diagnostics offered online by HP, but to no avail.  Am hooked up wirelessly and all connections say OK.  The print queue just keeps building up until i clear it.  Have checked ink cartridges, power reset procedure and also the Embedded Web server, print driver and port,verified that is not paused or offline, restarted the print spooler, checked the software program and removed and reinstalled the HP software.  It just will not print.  Will copy but not print.  Help!!

    I have exactly the same problem here.
    The printer is connected wirelessly to my router, which is connected with cable to my WinXP computer.
    I can see the web server, all pages report everything is normal and ready. 
    I can ping from my computer to the printer.
    I had no success getting the HP software on the CD to install, but the ~ 200 MB download version installed at least. However when the software probes to see what printers are available, it just doesn't see the printer (even though I can access its web server).
    I finally got my wife's computer (Win 7 64 bit) to connect, but don't know exactly what I did to make that happen.
    I noted that HP has a new version of firmware for the printer, so that will be tomorrow's project.

  • All in One HP Office Jet 6600 - not printing

    Just installed new ink cartridges, still recieve message "replace cartridges".  Is there any way to "reset" the printer? 

    Hello retiredfromwork,
    Welcome to the HP Forums!
    I understand you just replaced new ink cartridges, but it's still stating 'Replace Cartridges". I will do my best to assist you! Please try these steps in order to reset the printer:
    1) Make sure this printer is plugged into a direct wall. not a surge protector
    2) Take out all of your ink cartridges, close the door
    3) Remove the power cord at the back of the printer
    4) Try cleaning the copper contacts on the ink cartridge by following this HP document here
    5) Wait 60 seconds or more, then plug it back in
    6) Wait for the printer to turn on completely, then install the ink cartridges
    Please let me know if you're receiving the same message. Looking forward to hearing from you.
    I worked on behalf of HP.

  • HP 5610v All in One continually showing 'error; and not printing

    Have uninstalled and reinstalled in last couple of days but goes back to same 'error' failure to print.

    Hello Aljones,
    Welcome to the HP Support Forums!
    I see that you have been working hard trying to get the Deskjet 3050a working once again on your Tablet. What is the type of Tablet and the Operating System installed on it?
    Are you able to print with the HP ePrint Mobile App? Getting Started with HP ePrint Mobile Apps<---
    Cheers,
    JERENDS
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • HP Deskjet all-in-one F4440 will not print

    My HP Deskjet all-in-one- F4440 will not print.  I have put in a new color and a new black cartridge.  It clanks loudly when it moves back and forth.  Finally it stops and then pulls plain paper through as though printing on it - does this two or three times.  then it pulls plain paper halfway through and stops.  I have to tug and carefully pull halfway paper back out towards front to remove.

    Hi there,
    Could you provide the community with a little more information to help narrow troubleshooting? Are there any error messages or flashing lights? What operating system are you using?
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • DeskJet All in One printer cartridge compatibility

    Hi there. I hope you can help me. So my dad gave me this wonderful printer, the DeskJet 2544 all in one. Unfortunately, the tri. Color cartridge ran out. I was about to shop online on the HP website but there was no 301 tri color CH562E like the one installed on mine. I was thinking if I can buy other cartridges that can be an alternative? For example, the deskjet 2540 all in one uses HP 61 cartridge. Can I order and use that?&lt;br&gt;&lt;br&gt;Also, what is the difference of a deskjet all in one printer and a DESKJET INK ADVANTAGE all in one printer? Can I use cartridges from that?&lt;br&gt;&lt;br&gt;Thank you. Looking forward for someone to help.

    Was the printer purchased on one country but you are in another?  If so you will need to Contact HP to request a "Regionalization Reset". There should not be any charge for this, it is covered as part of the cartridge warranty. You will need to have access to your computer and printer while on the line with HP. You will also need to have a set of cartridges for the new region, once the reset is complete cartridges from the original region will no longer work.  HP's web page on the subject is here.
    You can find the correct cartridges for your area from the HP SureSupply site.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • HT3669 hp deskjet all in one 4488 printer software downloaded from apple does not work

    The printer software for HP Deskjet all in one F4488 downloaded from Apple support for OS 10.8.2 does not work. The problem is that the software is not available at the HP support site only.

    Your apparently older Model needs to use Apple's "Print & Scan" which is found in Applications>System Prefernces>Print & Scan.  There you will follow the following instructions from the HP Support site to Scan, for instance:
    Place the item that you want to scan on the scanner glass, or load it into the automatic document feeder (ADF) if your printer has one.
    Click the Apple menu ( ), and then click System Preferences .
    Click Print & Scan ( ).
    Click your printer in the left pane.
    Click Scan , and then click Open Scanner .
    Click Show Details . The details of the scan display, including options to change scan settings.Figure 4: Example of the Show Details scanning screen
    Change any scan settings as necessary, and then click Scan .NOTE: Make sure to select either the Flatbed mode or the Document Feeder mode, depending on your printer and how you plan to scan.
    Hope this helps

  • How to reset Deskjet All in one printer 2645 to its default setting?

    how to reset Deskjet All in one printer 2645 to its default setting?So I can change the paper size.

    We have difficulty in using the printer for "photocopy" purposes. This is because our printer doesn't have "specific options" for paper sizes. When copying, the only option default in our printer was : A4 plain, A4 photo & 4 x 6.. Our question is, how can we have the "specific options" for paper sizes ( legal, letter, or A4 size )? Do we need to "restore to defaults" our printer? Can you give us a step-by-step instructions to deal with our problem? Thanks.

  • My photosmart C7250 all-in-one used to allow me to print black and white only, now it won't

    My photosmart c7250 all-in-one used to allow me to print in black and white only if I changed properties to print in grayscale, black and white only.  Now it says it won't print until I replace one of the empty color cartridges.  I do no understand why the color cartridges are running out when I only use my black cartridge. 

    I still don't understand the difference between what I used to be allowed that I'm not allowed now.  I was able to bypass the empty color cartridges by changing my print property to "grayscale" and "black only".  Now I'm not allowed to bypass???

  • My hp 100 mobile printer will only print one page then quits. will not print all of the pages.

    my hp 100 mobile printer will only print one page then quits. will not print all of the pages.  i have rebooted, new install, and reset. still the same thing. when i look it shows that it is printing but there is nothing happing. i use this with my lap top.

    Hello colt1,
    Are you using Bluetooth or USB cable to connect to the printer?  Did you install from the disc, or from the online program?  When it sits there and doesn't print, does it eventually give error messages, lights flashing, etc.? 
    Thanks,
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • HT201465 I have installed software for a HP Deskjet 1510 printer but it will not print

    I have OS X Yosemite 10.10.3 and I just purchased a HP Deskjet 1510 all-in-one printer.  I have installed the software and my computer is picking up the printer but it will not print.  I have restarted the computer and it still will not print.

    Hello jamesettafromfl,
    If you continue to have issues setting up your new printer in Yosemite, you may find the information and troubleshooting steps outlined in the following articles helpful:
    OS X Yosemite: Add or remove a printer
    OS X Yosemite: Printing troubleshooting
    Sincerely,
    - Brenden

  • I have 5 devices all on one itune account.i have not activated icloud because i dont want it to sync all our information together. is there a way to set it up to only sync the music together and not the contacts photos messages etc

    i have 5 devices all on one itune account.i have not activated icloud because i dont want it to sync all our information together. is there a way to set it up to only sync the music together and not the contacts photos messages etc

    Unless you subscribe to iTunes Match, iCloud doesn't sync music.  Just set up every person's devices on a separate iCloud account and your iCloud data and photo stream will remain separated.  Each iCloud account will need a separate ID, but it does not need to be the same as your iTunes ID.  You can continue to share the same iTunes ID and maintain separate iCloud accounts with separate IDs for iCloud.
    You'll also want to use separate IDs for each person for iMessage and FaceTime.  This will keep your text messages and FaceTime called separated as well.  The easiest way to do this is to have everyone use their iCloud ID for these two services as well.

  • I just installed a multifunction Lexmark Pro905 printer and it will not print from Firefox, but will from Explorer????

    I just installed a multifunction Lexmark Pro905 printer and it will not print articles from Firefox, but will from Explorer??? Are there settings in Firefox to solve this??

    When you initiate printing with {Ctrl + P}, are you able to select that printer in the Printer - Name box?
    http://kb.mozillazine.org/Problems_printing_web_pages

  • Samba cups and windows 8: printer spools but will not print.

    Hello,
    I have samba and cups setup. I have been trying to connect to my windows printer. Here is my setup
    Arch linux linux-3.12.1-3
    samba-4.1.2-1
    cups-1.7.0-2
    Windows 8.1
    no firewalls
    Samba config
    [global]
    security = user
    #passdb backend = tdbsam
    #username map = /etc/samba/smbusers
    workgroup = Bobshouse
    encrypt passwords = yes
    wins support = yes
    log level = 1
    max log size = 1000
    read only = no
    #disable netbios = yes
    printing = cups
    printcap = cups
    [homes]
    browsable = no
    map archive = yes
    [Shared]
    browsable = yes
    read only = yes
    path = /home/bob/Share
    for cups some things I have tried are
    lpd://hostname/printer
    smb://username:password@hostname/printer_name
    I can see the printer with smbclient
    So the printer spools, but will not print. the paper does not move I just hear the printer. Also when I watch the print queues in windows and linux. Cups shows that it sent the document, but when I watch the windows queue it shows the document, but the size of the document stays at 32 kb out of 1.8 mb and says printing. I hope this makes sense. I am just trying to keep things very simple at this point. I just want to understand what the problem is and build on it.

    Please provide the following relevant information so someone can help including:
    Printer Model - done
    Complete and Detailed Problem Description -
    Operating System of computer (including service pack revision) - done
    Connection Method - USB, Hardwired LAN, Wireless? -
    Make and model of router and modem? -
    Error messages - on printer screen and/or computer, any blinking light patterns?
    If wireless, when the problem occurs, what is status of Blue Wireless light on printer, on, off or blinking? –
    Power off printer and router. Power on router and wait 3 mins, power on printer. Does it connect to the router now? Do you have a valid IP address?

  • I am having trouble printing I have a connection to my printer wirelessly but does not print out the correct page I want.When I do print I get a bunch of pages more than is needed and also get a code and symbols please help I am jammed at work

    I am having trouble printing I have a connection to my printer wirelessly but does not print out the correct page I want.When I do print I get a bunch of pages more than is needed and also get a code and symbols please help I am jammed at work

    This can be the result of selecting the wrong driver. An older, unsupported laser printer will sometimes work with the generic Postscript driver.

Maybe you are looking for

  • VO with Adobe Acrobat 9 Pro

    Can someone please give me a hint on how to get VO to focus on the document pane in Acrobat? I cannot get VO to read a PDF in Acrobat. It reads the Bookmarks/Pages pane just fine, but will not go to the documents pane. Even when I close the other pan

  • From ArrayCollection to Array in DataBinding

    Hi, I am trying to use somebody else's visual component (have src code of that mxml), which uses Array items as a DataSource. In my program I use ArrayCollection to hold my data (from the data feed - changes in real time). I need to pass some data fr

  • Where is the "show duplicates" command in iTunes 11?

    I can't find the "show dupicates" command in iTunes 11 and I have a number I want to delete.

  • Steps should be taken to make a client copy say from dev to test using BDLS

    Some one help to write up on real situation at any client site...by BASIS group for SRM box.. Say client num in Dev is 100 and we want to copy all that to a test box where the client number is 101... initially client 100 SRM box is pointing to R/3 sa

  • Migration assistant did not recover my mail even though it is there

    My iMac Power supply failed a few days ago and I decided to migrate my important data to my MacBook Pro until I get my iMac back. Both machines have been running Mavericks for a while and are up to date with the latest everything. I used Migration As