HP Deskjet D1560, Need Part numbers for power supply parts

I have an HP Deskjet D1560 still in the box. Does not have power adapter and power cord. (My daughter took them for her printer.) Where can I find the part numbers for the power supply parts? I live in the U.S., so I need the power cord that will fit in a U.S. outlet. The power cords in the product section are for the Middle East, Europe, and England. I need the one for the U.S. Where can I find that part number?

The power supply is part number 0957-2231 and the associated US cord is part number 8121-0889. I usually pick these up on eBay if I need a power supply, see the listings here. Make sure the power cord is included, it may be listed as a seperate item.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Similar Messages

Need adobe flash for power book g4 OS X 10.5.8

need adobe flash for power book g4 OS X 10.5.8

I fould a hack that makes the sites think you have the latest (Intel) version of Flash installed. So I installed it & it works with Firefox, TenFourFox & Safari. Here's the info.
Download this http://www.steelbin.com/FPforFBPPC.zip to your desktop, unzip it, and replace the current Flash Player plug-in which is in your main/Library/Internet Plug-Ins folder, (not the user Library). Save the old one just in case this one doesn't work.
 Cheers, Tom

Test Equipment for Power Supply

Hi ,
I want to develop a test software for power supply using LabVIEW which we can use for our mass production.
We are currently using the following for the development stage.
1. Digital Multimeter(Topward 1330)
2.Oscilloscope(Agilent DSO 6054A)
3.Programmable AC Source(Chroma 6430)
4. DC electronic Load (Chroma 63030)
We are using GPIB as the programming interface.We also use NI-VISA, NI-488.2 from LabVIEW to communicate.
Since I am new to this domain, I need an expert help in programming this software.
Thanks

Dennis_Knutson wrote:
And for follow up questions, please don't post to this board. You have nothing related to NI's pxi chassis/boards.
p.s. And after the test specification is complete, perform the tests manually. You can't understand a programmatic approach if you don't understand the instruments and their capabilities.
"You can't automate what you can't do manually" is one of my favorite maxims.
Now is the right time to use %^<%Y-%m-%dT%H:%M:%S%3uZ>T
If you don't hate time zones, you're not a real programmer.
"You are what you don't automate"
Inplaceness is synonymous with insidiousness

Searching Dock with for Power supply and Audio Out for iPhone 3GS

Hello,
I am rather new to Apple stuff but I now have an iPhone 3GS which I would like to use with my Yamaha Pianocraft.
The Yamaha has an optional iPod Dock. As far as I know, this would allow me to do things like pause, next track etc. via the Yamaha remote. However, I don't really need this and I would also like to be able to play audio from apps such as internet radio apps (e.g. 977)
So the Yamaha also has an AUX/Audio In connector on the back where I can simply connect my iPhone 3GS. Then I will just hear everything not through the iPhone speakers but through the Yamaha A/V Receiver.
However, this option would require me to have a cable connect at the top (headphone jacket) and at the bottom (connector for power supply), which does not look that good.
So I would like to have an iPhone 3GS dock that provides audio out as well as power supply. I have found three products for this (German Sites because I live in Germany):
Apple iPhone 4 Dock:
http://store.apple.com/de/product/MC596ZM/A?fnode=MTY1NDAzOQ&mco=MTgxNTkwOTg
Apple Universal Dock:
http://store.apple.com/de/product/MB125G/C?fnode=MTY1NDAzOQ&mco=MTA4NDc4NDA
Amazon:
http://www.amazon.de/Dockingstation-Apple-iPhone-Audio-Out-wei%C3%9F/dp/B003UP77 HQ/ref=wlit_dpo?ie=UTF8&coliid=I18C98SXGWLNIF&colid=29EKL14S3VRAN
As far as I am aware, the iPhone 4 Dock from Apple cannot be used with the iPhone 3GS. Is that correct? Is there any solution or an "iPhone 3GS Dock" available?
Can these docks also provide the audio from apps via audio out?
I hope you can help me.

Well on the backsite this product has audio out but not power, only the iphone connector.
If I want to use this station in one place only and not for syncing, I will have to buy another iPhone USB cable and another wall to USB adapter (altough I have come at home from other products).
Is there no dock that will not require some special iPhone cable?

HT5219 I have a macbook air (mid 2012) and a thunderbolt display. Do I absolutely need to connect the power supply together with the thunderbolt cable ? I found that the screen won't wake up if only the thunderbolt connection is plugged.

I have a macbook air (mid 2012) and a thunderbolt display (27'').
Do I absolutely need to connect the power supply together with the thunderbolt cable ?
I found that the screen won't wake up if only the thunderbolt connection is plugged. Is this normal ?

I just got my ATD and late 2011 MBP up and running. I've not tried running without the power adapter from the ATD plugged in, but I just tried and didn't have any problems with the display not waking. You may want to take your query to the ATD forum - https://discussions.apple.com/community/peripherals/thunderbolt_display - perhaps someone there has experienced a similar issue.
Good luck,
Clinton

I need help finding a power supply

I need to find a power supply that is compatible with my Compaq Presario SR5816F
It needs to have a minimum output of 12v @ 18 amps and have at leaast 350 wattts...
thanks.
This question was solved.
View Solution.

See my reply to your later thread:
http://h30434.www3.hp.com/t5/Desktop-Hardware/Will-this-power-supply-work-with-my-PC/m-p/4292292#M85...
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Want to Buy - G3/G4 Hex Screws for Power Supply.

I am looking to Buy - G3/G4 Hex Screws for Power Supply ( 3 ) These are the ones
that secure the PSU through the case in the rear.
Im not sure which other screws will fit and look like they belong.
If anyone has 3 lying around let me know the price so I can finish a project im working on.
Thanks,
Daryl G

Hey Jeff,
I think you meant a #6-32 hex drive cap screw.
Well I thought so at first but when I really looked at it and put it in my tap guide:
http://s291.photobucket.com/albums/ll306/spudnuty/?action=view&current=G3-G4PSUs crew.jpg
it's a #6-40. BTW that screw is from a G3 B&W it's the same as the one from the Sawtooth and that's a #6-32 next to it.
I think they're fairly easy to find. You could retap the holes to #6-32 but that would run the risk of metal chips floating around the power supply.
Richard
Message was edited by: spudnuty

I get power cuts in France. I need a ups emergency power supply. What spec do I need and what is the best manufacturer?

I get power cuts in France. I need a ups emergency power supply. What spec do I need and what is the best manufacturer? I have a Mac Pro from 2007 2 x 3 ghz dual core intel xeon. I would like a machine which will work with a replacement Mac Pro which I will be getting in the next few months. Alan Boyle

1500VA 865Watt
APC in some/most countries
Cyberpower - what I used to replace APC
You do not need pure sine-wave or SMART series which are top price but considered besr may be over-kill

Do I need an antenna for Power Mac G5 Wifi?

From the last 30 minutes I've spent surfing the interent about this subject I have learned that I need an AirPort Extreme Card.
Do I need the wifi antenna also? I think I read that without it the wifi is pretty weak but my router is just across the hall.
Also, let me know if there ANY other options to get wifi please!

You need an antenna for all G5 towers from 2003 to early 2005 models.
The T shaped antenna is easily found on the web.
2 hacks are listed in my post here:
https://discussions.apple.com/message/18677374#18677374

Intel Xserve Blower for Power Supply 1 Out drops to 0 RPM momentarily

10.5.6 Server. Machine is less than a year old. Yesterday I configured Server Monitor for the first time and have received two notifications of the blower for the Power Supply Out changing to zero RPM. It is momentary and goes back to normal.
Everything else is in the normal range -- temp, voltage.
Is this normal or indication of future failure?

Hi Forum folks.
I've had a 6-month (ish) Xserve doing the same thing. Every day, at least once a day, I'd get an email / SMS, saying the power supply or blower was having a momentary problem.
After shutting down the server, I pulled out the Power Supply Units, and checked them out.
Turns out, one of them had a slightly damaged heat sink (damage visible without opening the PSU). So, I swapped it for a spare I'd purchased. And then got the damaged unit (damaged internally at factory by the look of it) replaced by my Apple Reseller.
Note: the newer Intel XServes (early 2008) have a 750w PSU, compared to a 650w PSU, in the 2006 Intel XServes. The older PSUs fit in the newer Xserves, but they DO NOT function. (You'll get an error in Server monitor).
Hope that helps,
Cheers,
Derek

Need help fixing my Power Supply (delta 710W)

My Power Mac G5 had been acting strange lately in the form of not turning until I waited a day after turning it off. Thankfully, I have determined the cause to be the power supply after using the apple hardware test and reading other posts. When I press the power button before waiting, it clicks twice and turns off. If I do wait, the computer works normally (im actually typing on this computer right now!). Given the fact that I am a financially impaired diy technician, I want to fix it my self. Do be aware that I will be taking the necessary precautions while working on this thing because I am aware of the danger it involves. I think it could be a VERY basic issue, so any ideas would be helpful. Thank you.

Have you tried measuring the voltages of the PSU?
http://macosx.com/forums/hardware-peripherals/298426-how-test-g5-power-supply.ht ml
http://www.insanelymac.com/forum/lofiversion/index.php/t105113.html
http://www.applefritter.com/node/6561

Need invoice numbers for material masters.

Dear experts,
I have a list of approx. 200 PO numbers (not SO numbers) and material masters. I need to find invoice# for each PO#. Could you please help me what is the fastest way to find the invoice# using the data mentioned above? I do not want to enter each order separately and check document flow in order to find invoice, would like to find some faster way to do this
Hope you can help me!
Thank you in advance!!

Hello Abc,
Apart from the above suggestions, I would like to point out that if you are searching for this as a one time activity this is feasible. But sounds like this would required in future also. To make this very transparent you can consider my view which is described below;
Process Flow:
The PO no mentioned in sales order in VA02 will be copied to the billing document in VBRK header when you create billing from a delivery. This PO no will appear here in the Assignment field (VBRK-ZUONR) which will further goes to accounting document of RV in FI which can easily been identified in FBL5N.
SPRO Configuration:
In VTFL use the option A-Purchase Order no in the Assignment field.
2. This will copy the value to VBRK-ZUONR like below;
3. Finally you can see this from the account side also in standard reports only in FBL5N like below
So by this way you will be able to manage it by standard configuration as well as in standard reporting ZERO ABAP inputs required here and users can easily learn how to track this requirement from Sales side as well as from Finance end.
Thanks,
Suman

Satellite A135-SP4088: Need XP drivers for power management and Hotkey utility

Hello
I couldn't find drivers for the toshiba A135-SP4088, we bought 3 of them for the office and it's almost impossible to use with vista, so we go to XP SP2, and manage to get almost all of the drivers from other models, but i cannot find 2 utilities that work with this machine, they are:
Toshiba Power Management (the bulb in the task bar, remember?) :D
Hotkey Utility (so I can change Screen brightness, and go to hibernation (Fn+F4)
I have al the rest working, quite nicely but these two are a real problem, none of the ones I tested worked, some even crash the XP and have to go back to a previous restore point.
also, I didn't install any ACPI drivers, are they required?, which ones show I look for? since the model doesn't exist in csd.toshiba.com site.
Now, How one of the greatest notebooks manufacturers in the world can build such a nice computer without making drivers for the most widely used operating system?, can anyone explain me this because i sincerely don't understand it.
thanks a lot!.
Indkt.

Hi
The Satellite A135-SP4088 seems to be designed for the US market so you should use the Toshiba US driver page for the driver download!!!!
But why you need the Toshiba power saver for XP? The XP supports an own power options and also the hibernation option. This option must be enabled in the control panel -> power options -> hibernate tab
> didn't install any ACPI drivers, are they required
Toshiba page does not provide any special ACPI drivers. The OS uses own Microsoft drivers and the installation of any 3rd applications is not necessary!!!!
regards

CDC API for power supply and standby

Hi to all,
i have to wake up a java application developed under CDC when the PocketPC is under standby. Example: i have a timer, operator turn standby on pocket pc, and after that time i have to wake up the pocket pc. I do not have problems to develop in C++ and with JNI, so can anyone give me some information to resolv that problem?
Thanks,
Muzero

Well on the backsite this product has audio out but not power, only the iphone connector.
If I want to use this station in one place only and not for syncing, I will have to buy another iPhone USB cable and another wall to USB adapter (altough I have come at home from other products).
Is there no dock that will not require some special iPhone cable?

I need help picking the correct power supply for my HP Pavilion a1000

Hello,
I need to replace my power supply on my HP Pavilion a1000. It currently has the original (A Bestec Model: ATX-300-12Z CDR. The HP P/N is 5188-2625.
I found one on ebay that has the same numbers but instead of CDR, it says DDR. I don't really know what that means. The listing is below. Will this work? If not, could you give me a link that would work?
Thanks ahead of time for your help!!
http://www.ebay.com/itm/Not-Noisy-Replacement-PC-Power-Supply-fo-Bestec-ATX-300-12Z-DDR-HP-P-N-5188-...
This question was solved.
View Solution.

jimmycaps wrote:
Hello,
I need to replace my power supply on my HP Pavilion a1000. It currently has the original (A Bestec Model: ATX-300-12Z CDR. The HP P/N is 5188-2625.
I found one on ebay that has the same numbers but instead of CDR, it says DDR. I don't really know what that means. The listing is below. Will this work? If not, could you give me a link that would work?
Thanks ahead of time for your help!!
http://www.ebay.com/itm/Not-Noisy-Replacement-PC-Power-Supply-fo-Bestec-ATX-300-12Z-DDR-HP-P-N-5188-...
Hi,
Yes the PSU will be ok. It's a desktop so you don't have to use exactly the same PSU. It can be even more powerful but make sure there are all compatible connectors. It looks like the CDR version is only 300W and the DDR 400W. The connectors are the same..
http://www.newpowersupply.com/bestec_atx_300_12z_cdr_300w_300w_24_pin_ps2_replacement_power_supply_p...
Dv6-7000 /Full HD/Core i5-3360M/GF 650M/Corsair 8GB/Intel 7260AC/Samsung Pro 256GB
Testing - HP 15-p000
HP Touchpad provided by HP
Currently on Debian Wheeze
*Please, help other users with the same issue by marking your solved topics as "Accept as Solution"*

HP Deskjet D1560, Need Part numbers for power supply parts

Similar Messages

Maybe you are looking for