HP Deskjet f 380 windows 7 32 bit .

i am new to these boards and have just gone from Windows xp to Windows 7. and downloaded the latest download for my printer. Still trying to get used to both.
i am not a computer techie. What is the best format in scanning a letter, which i want to send to email.  In my printers older version I could open up in the Paint programme and because of it's size,  downsized it to a 1/5th. 
 any simple instructions please.
This question was solved.
View Solution.

Hello there Pat4750, Welcome to the Forums! I hope you enjoy your experience
I noticed your post about how you have just switched from Windows XP to Windows 7 and have some scanning inquires. I have found some really helpful instructions that I am hoping will work for you.
Click on the link then choose How to scan with HP software and then How to attach a scan to an email.
How to Scan: Windows 7
I hope my post helps you!
Have a terrific Tuesday
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Similar Messages

  • Trouble installing HP Deskjet 722c on Windows 7 64-bit on a network

    Hi,
    I have a Windows 7 64-bit system and am trying to connect to an HP Deskjet 722c through a home network. My other Windows 7 PCs can connect and print to this printer (it is shared on the network via an old WinXP box) but when I try to install the printer on my 64-bit machine, it says it is trying to download an update and it fails to do so. Please help!

    Hello fladavpam,
    Sometimes it can be tricky to share a printer from XP to 7. Check out the following links for instructions on how to do so:
    http://goo.gl/4Eun
    or
    http://goo.gl/cSrER
    If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

  • Cant print banner on Deskjet 6122 with Windows 7 64 bit (with driver HP 990c). Please help

    As a teacher, I frequently print banner with my HP Deskjet 6122.  I just got a new computer that has Windows 7 64 bit as the operating system.  THere is no Deskjet 6122 driver for Windows 7 64 bit and I therefore used the HP 990c driver (recommended on the HP site).  While the HP990c driver works fine for regular printing, I cannot print banners as 'banner paper' is no longer available in the paper option for printing.
    Is there any way I can print banners with my HP 6122 using WIndows 7? Any help would be greatly appreciated.
    THanks

    Hi @crobin678 , and welcome to the HP Forums!
    I understand you are running into compatibility issues.  I would like to assist.
    I would recommend following this document on Installing an Alternate Print Driver in Windows 7 for a USB Cable Connection.
    Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
    Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
    Jamieson
    I work on behalf of HP
    "Remember, I'm pulling for you, we're all in this together!" - Red Green.

  • How clean print head or install toolbox on hp deskjet 940c using windows 8 64 bit

    I want to change the ink cartrige and clean the head and re-align it.
    I also want to know the quantity of ink in the cartriges.
    How can I install the toolbox?
    I have Windows 8 64 bit.
    Thank you!

    Hi rgauthi,
    I am sorry to say your printer does not have full feature software and drivers. You are using an in-OS driver and HP Solution Center and HP Toolbox are not supported by the in-OS driver. You can use the workarounds in the following link. Learn how to use your HP printer with the new Windows 8 operating system.
    Hope this helps.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • In need of Printer drivers for HP Deskjet 930C for Windows 7 32 bit Enterprise?

    Have been Online in HP support and folllowed all steps and that didnt work.  Called HP rep and that didn't work.  Hp still sell the cartridges, so not sure why I can't get drivers for my printer. 

    You may need to talk to your system administrator.  Many IT departments restrict what drivers or devices can be added by standard users.   
    If the driver is not available try the following:  Start, Devices and Printers, Add a Printer, Local Printer, LPT1: (for now, will address this later), Next, Windows Update and wait for the list to repopulate.  This will take a few minutes, but at this time the Deskjet 930/932/935 should be available under manufacturer HP (not Hewlett-Packard).  At this point hit cancel, then connect the printer's USB and it should be installed automatically.
    You could also download the driver from the Microsoft Catalog site.  You will need to use IE for this, other browsers are not supported.  The driver you will want for a 32 bit system is the one 11.4Mb in size.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • HP deskjet 710c and windows 7 64 bit serial port configuration

    Hi computer people,
    Please help, I can't get my Hp deskjet 710c to print with Windows 7 professional 64 bit computer via non usb i.e I am using the serial port connections via computer and printer. Any solutions as to why it won't print ?

    Hello PeterB91,
    Welcome to the HP Forums, I hope you enjoy your experience!
    I have read your post on how you are not able to  print on your Windows 7 computer, and I would be happy to assist you in this matter!
    Unfortunately, the only way to update the drivers for your printer on your computer is to connect the two devices with a USB cable. This will allow the installation of Plug-and-Play drivers. According to the Product Specifications for your printer, the only available connection-type is for the IEEE cable.
    As a workaround, you may be able to use a USB to IEEE adapter, but this option is not guaranteed. 
    I hope this helps!
    Best Regards  
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

  • Deskjet printer for Windows 7 64 bit

    I have a laptop loaded with OS Windows 7 Home edition 64 bits. Can I use any HP Deskjet Printer like DJ100 , D2600 etc ? Please respond so that I can buy immediately

    Hi,
    No Windows 7 support for DJ 100:
      http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=82208&locale=en_us&ta...
    You can use drivers from the following link for the D2600 and install to your Windows 7 machine:
      http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=3742935&cc=mx&taskId=...
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • I need a driver for HP Deskjet 882C for Windows 7 64 Bit

    Although Windows 7 does not officially support an old printer like HP deskjet 882C, is there some driver which would work for black and white printing?

    The Deskjet 882c is supported in Windows 7, install the driver as described here.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Driver for HP deskjet 1180c on Windows 7 64-bit

    Thanks Bob.  Your help meant I was able to get the 1180c printer up and running after installing Windows 7.  Would not have known where to even start looking for a solution without finding your "fix".  Thanks again. 

    I am glad I could help.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Why can't I print on my Deskjet 710C in Windows 7 - 64 bits.

    I don't have a parallel port on my PC, therefore my printer is connected to a PCI parallel card. It is visible in "Devices and Printers" and my PCI card is also visible in "Control Panel". Both, my printer and card are configured to LPT1. Note that my printer was detected by Windows when it was connected. My printer is not the culprit since it prints on another PC with a integrated parallel port.
    Despite no conflict in Control Panel or Printers/Devices, I can't at all print using this printer. When I try to print a "Test Page" from the printer's properties, the page is set to the printer, however no document is present in the spooler.
    Can someone help? I find it a shame to throw away a perfectly good and working printer.
    Thanks,

    Try to delete and re-download the app. log in and try again.

  • HP Deskjet 1280 Printer intallation in 64 bit Windows Server 2012

    We are not able to get suitable driver for 64 bit Windows server 2012 for printer HP Deskjet 1280. The same printer is working in Windows 2003 server.  Printer manufacturer has not developed their driver fro WS-2012. Kindly help in resolving the issue.

    Hi,
    Can you please go through below Technet thread.
    http://social.technet.microsoft.com/Forums/windowsserver/en-US/122542f7-19c2-417a-ade9-1211d4f96d13/cant-add-the-x86-drivers-of-hp-deskjet-1280-to-windows-2008-64-bit-server
    Regards,
    Manjunath Sullad

  • Hp deskjet 5940 drivers for windows xp 32 bit

    hello!
    who can help me find a driver for windows xp 32 bit for my hp deskjet 5940?? the drivers that you download from hp website is for xp 64 bit!
    thanks
    Ans

    thanks for your help!
    I tried this but it does not work for my windows xp 32 bit!
    I have tried many a driver but I can not find anyone!
    I do not know what to do ...

  • HP Deskjet 3920 driver for Windows 7 64 bit not available anywhere

    Printer HP Deskjet 3920
    No drver software is available for operating system Windows 7 64 bit
    This is the 4th week since I started search.
    This question was solved.
    View Solution.

    Hello I am an employee at HP and I just replied to another person on the same type of problem.  I don't know if you already did this but I had the same problem on a different printer and it worked for me.  You have to have the printer turned on and hooked up to your PC and then do a Windows Update.  With Win7 update the process will see that you have the printer and need a driver and should give you the option to download it.  You can then select it and download it and it should work.  Here is also the text from the HP website.  I hope this works for you.
    NOTE:When you connect the USB cable to the printer, and then to the computer, Windows 7 activates Windows Update. Windows Update searches online for the most recent product driver on the Windows Update site. If the online driver is more recent than the driver stored in Windows 7, the computer downloads and installs the updated driver.The Windows Update process takes place automatically. Therefore, you might not notice that the process is in progress.

  • HP Deskjet 6122 Driver Compatible with Windows 7 32-bit

    I need to find out how to update the driver for my HP Deskjet 6122.  We upgraded to Windows 7 32-bit and the only instructions I can find show using a USB cable from the printer to the computer, and the HP Deskjet 6122 does not have a USB cable nor does it have anywhere to plub on in?  Is there another way?

    It should work OK, since PSE is a 32-bit application, and Win7 can run applications in "Compatibility Mode" using the settings for earlier versions of Windows.
    Ken

  • Print panel on hp deskjet in windows 7 64-bit

    Hi!
    My customers had problems with print.panel to printer method in windows 7 64-bit so I made a simple standalone application which prints a VI panel to default printer (zipped project is attached). I'm using Developer Suite with Labview 12.0f3 (32 bit) on Windows XP. The application has been deployed to computers running windows 7 (64 bit) and windows XP (32 bit) and tested with different printers: local and network. There is a list of printers where the application does not print the panel on windows 7 (64 bit): HP DeskJet D4360, HP DeskJet 5550, HP DeskJet 5652, HP Photosmart C3180 and PDF Complete (an application which converts document to PDF). The application does not report any error, everything seems normal. The document is sent to the printer, usually printer heads start to move for a moment, in one case the paper is taken from the drawer and that's all. There's no need to say that all this printers work normally with Winword, Notepad, Excel, ...
    My application prints a VI panel in Windows 7 (64 bit) without any problems if I use: Canon IR2200, Toshiba e-STUDIO 2500c, Samsung ML-2240, HP LaserJet 5L, HP LaserJet P2050, PDFcreator, ....
    ALL printers, including HP DeskJet models, work normally  in Windows XP (32 bit).
    According to the post here  the printer margins in my application are set to a value of 3 cm because it might solve the problem but it does not help.
    Any other suggestion?
    Ljubo.
    Attachments:
    _proj_PRN_test.zip ‏14 KB

    Dear Ljubo!
    I'm glad that it has worked for you, I hope your clients will have the same success. As I've found, incompatible printers on Windows 7 64bit is a known issue, and will hopefully be fixed in a later version of LabVIEW. I'll be sure to include your input (which printers worked and which did not) on the case. 
    Also, it seems to me that both the Invoke Node and the Library Call use the same function to accomplish printing; however, the Node sets the "show print dialog" input automatically to false, hence the lack of printing options (this makes sense from a programming perspective, since if we want to print programmatically, additional user input at every print job is most likely unwanted). Please get back to me when your customer has results, if something is still not functioning, we might explore some other workarounds.
    Kind regards:
    Andrew Valko
    National Instruments 
    Andrew Valko
    National Instruments Hungary

Maybe you are looking for

  • Persist does not throw any exception in a JUnit test

    I am implementing a JUnit test using Toplink as JPA provider. I must be missing something because I try to persist two times the same entity and no exception is thrown. Neither PersistenceException nor any other type of exception. The code cannot be

  • Error checking....channel encoder

    Hello I want to ask how I can make in labview something like error checking...maybe channel encoder...it is possible...because | want to chcecks errors by sending data through serial port...it is good choice channel encoder?? and if yes...how I can m

  • Getting my application domain

    Been searching all morning trying to find a example of the ApplicationDomain funciton in Flash AS3. So far none have given me the desired result. I am trying to retrieve the domain my swf is running in only. I need to set variables (STRINGS) accordin

  • Extract a video from thumbdrive that was created in idvd

    I copied a movie from a friends idvd to my thumb drive and I am not able to open and play it on my Macbook Pro. Is there a way to extract this video from idvd on the thumbdrive and save it in a different fomat?

  • When I restore my IPAD 2 from backup, I lost all Emails. what to do?

    Following instruction I restore and reload my Ipad2. Everything seems OK but all emails were gone. Is there a way to recover? This give me no confident that everything can be restore after a hardware failure.