HP Deskjet F2280 always queue..

hi
my mom bought a hp desktop f2280 from KSA.. I installed all the drivers and softwares needed and seem's going smooth.. then when the time i was going to print, it always queue at the spooler.. i tried all the solutions like updating drivers and many more solutions in your site.. but still it doesnt work at all.. i even try the diagnostic tool but its the same problem..
specs:
OS: windows vista ultimate 32bit
need help..

Thanks for the reply Bar100!
Since it appears to be the hardware that is the issue, I will still recommend that you plug the printer directly to a wall outlet (if you're able to) just to make sure it isn't the powerbar causing it to be super slow in the printing.
If you're not able to plug it to a wall, or it doesn't seem to change anything, please have a look through this HP Privacy Statement and then proceed to check your inbox for the reset instructions. If you are not sure how to check your forum messages this post, has instructions
Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
**MissTeriLynn**
I work on behalf of HP

Similar Messages

  • Printing problem on Deskjet F2280 connected to JetDirect en3700 (Scanning works)

    Hi,
    Recently acquired a JetDirect en3700 and after updating it to the latest firmware release (V.28.22.FF?) hooked up my trusty Deskjet F2280 to it. The printer is detected by the print server and I can scan pages using the Web UI but I can't print anything, even the test page button (the physical button on the en3700) doesn't produce any output.
    I've installed the network printer on Windows 8.1 x64 and Debian Wheezy and while they can both see the printer, no output is produced when I send pages down to it.
    When I connect the printer to both machines using USB I can print pages without an issue.
    Here's the main page on the Web UI, stating that the printer is 'Online':
    And the full configuration page:
    Any thoughts/comments?
    Thanks.

    Hi,
    Follow the HP Print and Scan doctor by selecting Fix Printing and check if that may make any difference.
    The tool can be downloaded from the following link:
    http://h20180.www2.hp.com/apps/Nav?h_pagetype=s-92​6&h_lang=en&h_client=s-h-e016-1&h_keyword=dg-PDU
    I would also suggest trying the following Fixit by Microsoft and check if that may help resolving the issue:
    https://support.microsoft.com/en-us/mats/printing_​problems/en
    If the issue persists follow these steps and check if that may help:
    Unplug the USB cable.
    Uninstall the printer by following Start > Programs > HP > HP Deskjet 2645 > Uninstall.
    Click both the Windows Logo and the R keys of your keyboard. the Run dialog appears.
    Type Spool and press OK.
    Open the Drivers folder.
    Open the x64 folder.
    Open the 3 folder.
    Rename the HPBXPSRENDER.DLL file into HPBXPSRENDER.OLD
    Reinstall the HP software and try printing again
    Hope that helps,
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • HP Deskjet F2280 - are the inks fade resistant?

    Hello
    I was wondering if anyone knows if the HP Deskjet F2280's inks (21 & 22) are fade resistant?
    I'm printing some cards with simple, block colours (thick, coloured stripes) on matte paper (not HP) and they need to be fade resistant.
    Any help is appreciated, thank you

    Hey @keaton87 ,
    Thank you for taking the time out of your day to ask that question on the HP Forums today!
    Yes they are fade resistant.
    Hope that makes it simple. 
    I worked for HP.

  • Need to re install Deskjet f2280 but mislaid my CD -rom ?

    I have HP Deskjet F2280 All in one. I bought a new computer recently which has Windows 8 installed. I want to reinstall Hp F2280 but I have lost the Software CD and I can't use the Deskjet without it. Please help.
    This question was solved.
    View Solution.

    Hi Armatic,
    Welcome to the HP Forums.
    I see that you are attempting to install the printer on to you Windows 8 computer.
    If you have the printer connected to the computer with a USB cable, please remove the cable from both printer and computer and leave it disconnected until further notice.
    Please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
    I am going to give you a link to the HP Deskjet F2200/F2224 All-in-One Printer series Full Feature Software and Driver. Please save the download to the Desktop on the computer so that it creates it's own Icon.  This will make it easy to find when the download is complete. 
    Double click the new Icon and follow the instructions that appear on the screen.  The installation will prompt you as to when to connect the USB cable so please do not connect it before hand.
    If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
    Thank you for your time.
    Cheers,  
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • Why is my HP Deskjet 970C  Print Queue Status  "Stopped" and won't change?

    I recently installed 10.5 Leopard. Hooked up my old HP-970C Deskjet. Used the link: http://www.linuxfoundation.org/en/OpenPrinting/MacOSX/foomatic to get the new HP Driver as recommended. Set up printer with this driver.
    Each time the print command is given (Word Doc or .pdf file) nothing happens. The job is shown in the Print Queue with the Status says "Stopped." Clicking the resume button does not start the printer. Twice more and I get a message that says "Operation Could not be completed. client-error-not-possible."
    Any thoughts on how to work around this?
    Tried the six steps listed at: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01462601&lc=en&dlc=en&cc=us &lang=en&softwareitem=bi-54970-4&os=219&rule=5837&product=3435684
    Even those great steps did not help. Any other ideas? Thanks!!!

    The short answer is that you have an older HP printer, and have just been bitten by HP's abandonment of older printers on both Leopard and Vista.
    The foomatic drivers should work, though; I used foomatic drivers on my old HP MFD for years. They gave better output than the ones HP shipped, and actually worked in Leopard. I put the HP onto a machine running XP because scanning didn't work anymore on either Vista or Leopard and HP had no intention of fixing it.
    When I see the error you quoted, there are usually three possible causes:
    1 the printer itself has a hardware problem. The fix for that is to buy a new printer, it's not economic to repair a DJ970.
    2 the HP drivers are present on the system and are interfering. The fix for that is to remove the HP drivers and just have the foomatic drivers installed.
    3 the USB cable is bad or loose. The fix for that is to get a new USB cable and make sure that it is securely plugged in.

  • HP deskjet F2280 printing problem..

    Good day guys! here's my problem. when i tried to print a document, this message will always appear --->
    i try to fix this problem. but when i checked the printer, there's no paper jam...i found out that my cartidge wasn't moving..can you give me idea how to fix this?..thanks in advance.. ^_^

    Does this occur with every line printed or only on the last line of the page?
    If you change the print quality to "best"  does that clear up the issue?
    If the answer to either is "yes" then try cleaning the cartrdige contacts as shown here.
    Regards,
    Bob Headrick, Microsoft MVP Printing/Imaging
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • How to Scan document on HP deskjet F2280 to PC

    Hi there how can i scan a document from printer HP F2280 on to  the pc,  when i press the scan button it blinks for a few seconds then nothing happens, the Printer works great..

    Hello urbantigerMALC.
    Please, download and run the HP Print and Scan doctor from http://www.hp.com/go/tools
    Cheers!!
    Wixma.
    I am an HP employee.
    Say thanks by clicking the Kudos star in the post.
    If my reply resolved your problem, please mark it as as Accepted Solution so that it can be found easier by other people.

  • Deskjet f2280 no printing new cartridges​, new drivers

    i have tried everything i know. new print cartridges colour & black, re-dowloaded drive package from hp.com.
    will only print colour in copy mode, no black. have tried cleaning the heads as well.
    please help
    thanks Brian

    Hi there,
    Could you provide the community with a little more information to help narrow troubleshooting? What operating system are we using?
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • Installing HP deskjet F2280 on windows 7

    installation disk only good for windows XP 2000 and vista this computer is windows 7 any info you have would help.
    This question was solved.
    View Solution.

    Hi,
    Just wanted to say a very big thank you

  • I use hp deskjet f2280 and i cant print from my ipad2

    My printer is pluged to the network hub, looking for some apps
    Take Carey

    This is the list of AirPrint compatible HP printers that will work wirelessly via WiFi. If yours is not on the list it will not work with AirPrint. There are third party apps available that will allow you to print via WiFi with virtually Amy printer. Search the app store or perform an internet search to find them.
    AirPrint-enabled printers
    HP Envy e-All-in-One series (D410a)
    HP Photosmart Plus e-AiO (B210a)
    HP Photosmart Premium e-AiO (C310a)
    HP Photosmart Premium Fax e-AiO (C410a)
    HP Photosmart e-AiO (D110)
    HP Photosmart eStation (C510)
    HP LaserJet Pro M1536dnf Multifunction Printer
    HP LaserJet Pro CM1415fn Color Multifunction Printer
    HP LaserJet Pro CM1415fnw Color Multifunction Printer
    HP LaserJet Pro CP1525n Color Printer
    HP LaserJet Pro CP1525nw Color Printer
    HP Officejet 6500A e-AiO
    HP Officejet 6500A Plus e-AiO
    HP Officejet 7500A Wide Format e-AiO
    HP Officejet Pro 8500A e-AiO
    HP Officejet Pro 8500A Premium e-AiO
    HP Officejet Pro 8500A Plus e-AiO

  • HP Deskjet F2280 won't work with Airport Express

    Hello.
    When I try to add the printer, plugged into the Airport, in the settings, it says "because of a network error it could not get the software." One time it seemed to have worked, but then I could not print. So I deleted the printer again, and now I cannot install the software again.
    I cannot print anything on my iPad through airprint, because there are no printers found... What can I do?

    I thought I could plug in any printer there and print over the air to the airport express's usb printer...
    Not all printers are compatible with the USB port on the AirPort Express....and....AirPrint is a completely separate matter. This is a separate Apple feature that allows an iPad or iPhone to print to an AirPrint compatible printer using wireless.
    The printer has to connect to the network using wireless for AirPrint to work....not USB. You might be able to use a separate App like Printopia to allow the iPad to print when the printer is connected to the USB port.
    There is a free trial for Printopia, so you will know if it will work before you buy.
    Printopia - AirPrint to Any Printer - Print from iPad - Print from iPhone ...
    But, first things first.  You need to see if you can get printing to work normally first from your Mac....and then try Printopia to see if it will allow the iPad to print.
    But the main problem is that it won't download any software... Even when I plug in the printer into my Macbook, it says "searching for software" and then "Cannot download software now, there is a network problem." But I'm clearly connected to the internet so...
    Have you tried powering off the MacBook and the AirPort Express?
    Have you contacted HP Support to ask them about whether they still support your printer....and whether there any new printer drivers that you could manually download and install?

  • Trojan.spatet - Deskjet F2280 - HP Solution Centre

    Hello. This is my very first post here so I hope it's in the correct place!
    I recently had my new-look HP Solution Centre updated. This morning I scanned a document and had problems when I tried to print it - a lengthy delay. In the end, I had to delete the print request.
    I ran Malwarebytes just now and it found two trojans. Under the heading 'Vendor' appeared Trojan.Spatet and two entries, one a file -   (C:\Program Files\HP\Digital Imaging\help\player\FlashPla.exe) and the other a corresponding Registry Value.
    Is it just a co-incidence that the trojan appeared just after the Solution Centre Update? Or is this a false positive viz the trojan is in fact part of the HP Solution Centre software?

    and now another problem! When I powered up just now, there was a window "SolutionCenter".
    Its message was "The feature you are trying to use is on a network resource that is unavailable. Click OK to try again, or enter an alernate path to a folder containing the installation package 'SolutionCenter.msi' in the box below."
    The box was titled "Use source" and it it were the wordsCALS~1\Temp\7zS0463\setup\SolutionCenter".
    Clicking OK took me back to the first window. Clicking Cancel, brought up another Message Box that said "(Exclamation mark in yellow triangle) An installation package for the product SolutionCenter cannot be found. Try the installation again using a valid copy of the installation package 'SolutionCenter.msi."
    Clicking OK brought up a message "Please wait while Windows configures SolutionCenter - gathering required information." After a few minutes of this repeating itself, I hit Cancel. After several hits on Cancel, the blasted message went away.
    Can anyone from HP help me please?

  • HP F2280 ALL IN ONE DESKJET

    Hello i have one hp f2280.
    I had to work with it a couple of months.i lost th drivers cd and i tried to download them from the hp site.
    I found the right one for my printer but my pc doesnt recognize it as a printer but as an uknown usb device connected.
    Do you have any idea of what i can do to make it work again?
    Some times all the leds are blinking and the E letter appears on my printers screen

    Hi Kerkyraios,
    Welcome to the HP Forums!
    I understand that your pc doesn't see your HP Deskjet F2280, and that sometimes all the lights blink. I am happy to help you with this issue!
    Let's start by going through this blinking lights guide. Blinking Lights.
    Also what is the Operating System on the PC? If you do not know the Operating System you are using, please visit this website. Whatsmyos.
    Hope to hear from you, and have a nice day!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • I am trying to download F2280, but when I click on that option it downloads F2200-. Why??

    After downloading the latest updates, my printer would not work (yet again).  In the past, I have simply gone on line and downloaded for my F2280 printer and all was satisfatory.  This time however, when I click on the F2280 option, it brings up the F2200 series with an option to click on F2280, but when I chose the F2280 option it downloads F2200, repeatedly!
    This will not work for me so what am I doing wrong?

    Hi,
    The HP Deskjet F2280 is a part of the F2200 series, the installer is intended for the entire series and is correct.
    What issue you experience? ay the isntaller won't respond once connecting the USB cable?
    Please ensure the USB is no longer than 2 meters long, try plugging it to other ports of your OC once the installation prompts to do so.
    Be sure to connect it directly, not through any USB hub or extensions which may prevent a proper connection, if the same pesists I suggest trying a different USB cable and check again.
    Hope that help,
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • Printer f2280 not printing after replacing ink

    I have replaced ink cartridges on my deskjet f2280,but indicator showing empty. Followed few ideas of pressing power and cancel to reset and replugged cable but no change. Covered ink cartrige at the back to reset ink still no change???Kindly advise plz

    Hello sergent6013,
    Welcome to the HP Forums.
    I see that after changing the inks in your Deskjet F2280 that the printer is still showing they're empty. I will try and assist you with this issue.
    Here is a document: Blinking Lights, that may be of use to you. It would guide through steps and causes as to what my be going on based on indicators on your printer.
    Also, this document: Faded or Dull Colors in Printouts, has a few steps that might be helpful too.
    Try a combination of both, and see how things go. If you need further help, or have questions please let me know.
    Thank you for posting on the HP Forums.
    I worked on behalf of HP.

Maybe you are looking for