HP DESKJET F4280 All In One has stop printing

I have checked cable, hub, and done everything that I can think of doing inculding updating drivers, software, windows but it still won't print even a test page. Everything that I send to print it shows error. How can I get my printer which worked fine Tuesday to work again?

Thanks for providing that information jasmineholt.
Since the black isn't printing on the self test page, it might be a hardware issue with the printer or the cartridge.
I have provided a couple of documents with some steps to try to see if that will resolve the issue.
Faded, Missing, or Dull Colors in Printouts.
'Print Cartridge Problem', 'Incompatible Cartridge', 'Incorrectly Installed Cartridge', or 'Print Ca... Disregard the title. It also provides the areas to clean on the cartridge. Just to make sure they are the areas you have already cleaned.
Do you have another black cartridge to try? Just to rule that out.
Are you using Genuine HP Cartridges?
What are the ink levels?
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Similar Messages

  • Deskjet F2235 All-In-One has stopped working

    Hi,
    My all-in-one has stopped working. I purchased it new at Christmas 2008 and have only printed 2 test pages, but now when I turn it on all the lights on the front panel light-up & my PC says the printer is off-line. I cannot even get it to turn off by the on/off switch... I have to pull the mains plug from the back.
    - I have un-installed & re-installed the software twice without improvement.
    - I have replaced the USB cable without improvement.
    My PC is a 2.4GHz Celeron 2 with 512 Mb RAM, XP Home SP3, 80Gb hard drive with 7Gb free.
    Any ideas ?
    Thanks in advance.

    seems like a hardware issue. can you please follow THIS document and see which lights are blinking, and do the corresponding troubleshooting and see what happens?
    Make it easier for other people to find solutions, by marking my answer with \'Accept as Solution\' if it solves your problem.
    Click on the BLUE KUDOS button on the left to say "Thanks"
    I am an ex-HP Employee.

  • My HP Officejet J5780 All-in-One has stopped printing

    My HP Officejet  J5780 All-in-One keeps sending the messge" Out of paper,load paper and  then press OK to start" even though I have paper already in my tray. It will not print and I don't know why. Can anyone please tell me what the problem might be to cause it to function this way and what I can do to fix it myself if at all possible? I would appreciate hearing from anyone that might be able to help me. Thank you and have a blessed day.Sincerely, Blesseda49

    Hi
    Try the steps here  'Out of Paper' Error Message Displays and the Product Does Not Pick Up or Feed Paper
    Does this solve the issue?
    Although I am an HP employee, I am speaking for myself and not for HP.
    Twitter: @Ciara_B_HP

  • HP OfficeJet Pro 8500A e-all-in-one has stopped printing from my computer

    My 8500e has been working fine for months.  My computer is an HP HPE Phoenix h9t.  I'm running Windows 7.  The printer is set up on the wireless network.  This week it just quit printing.  I have uninstalled, reinstalled, downloaded diagnostics.  You name it, I've done it.  Nothing in my network or computer setup has changed.  I can set up the wireless on the printer itself--it sees my wifi network, I enter the security code, I can print the wireless network test report from the printer itself, everything is pass and excellent. 
    Then when I install the software on the computer, tell it I have an IP address from the printer, which is connected wirelessly, I put in the IP address from the display screen on the printer and computer searches then says it can't find it.  I have also reset the printer to factory defaults.  No go.
    We are definitely on the same, secure home network.  However, now when I enter the IP address that the printer is giving me into IE, to see if I can see it that way, it can't find it.  Is that where the problem is?  How do I fix that?
    I am WAY beyond frustrated, my work is frighteningly behind, and my husband can't airprint from his iPad.  I have searched the forum and can't figure this out. 
    Thanks for reading through my litany of woes...

    Download and run this utility: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-104282-2&cc=us&dlc=en&lc=en...
    What does it say?
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • The HP Deskjet 3050A All-In-One J611 series printer I just bought is not compatible with my Mac Book Pro.  What do I need to do?

    I recently purchased an HP Deskjet 3050A All-In-One J611 series printer and it is not compatible with the version of the operating system on my mac book pro.  I am currently running on OS X 10.4.11 and the printer is compatible with v10.5 or higher.  What can I do to update the operating system on my Mac Book Pro? 

    10.5 will be harder to find & more expensive, I think I'd go for 10.6
    Leopard requirements/10.5.x...
        *  Mac computer with an Intel, PowerPC G5, or PowerPC G4 (867MHz or faster) processor
    minimum system requirements
        * 512MB of memory (I say 1.5GB for PPC at least, 2-3GB minimum for IntelMacs)
        * DVD drive for installation
        * 9GB of available disk space (I say 30GB at least)
    Apple no longer has it for sale.
    Snow Leopard/10.6.x Requirements...
    General requirements
       * Mac computer with an Intel processor
        * 1GB of memory (I say 2GB at least)
        * 5GB of available disk space (I say 30GB at least)
        * DVD drive for installation
        * Some features require a compatible Internet service provider; fees may apply.
        * Some features require Apple’s MobileMe service; fees and terms apply.
    Which apps work with Mac OS X 10.6?...
    http://snowleopard.wikidot.com/
    It looks like they might still have it...
    http://store.apple.com/us/product/MC573Z/A?fnode=MTY1NDAzOA

  • Upgrade Deskjet 3050 all in one J610 to print Apple AirPrint?

    Anyone knows if you can upgrade Deskjet 3050 all-in-one j610 to print AirPrint from my Ipad?
    Or in a way to work around printing to this J-model from my Ipad?

    The Deskjet 3050 does not support AirPrint.  AirPrint requires firmware in the printer that understands the AirPrint format.
    You can use the HP ePrint application,
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c02775166#N58
    https://itunes.apple.com/us/app/hp-eprint/id299531647?mt=8
    or
    Try the HP All-in-One Printer Remote application,
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c03561640
    https://itunes.apple.com/us/app/hp-all-in-one-printer-remote/id469284907?mt=8
    I am an HP employee.

  • HP DeskJet 1050 ALL-IN-ONE J410 series Printer Scanner stopped working suddenly

    About a month back Scanner in my printer-scanner (DeskJet 1050 All-In-One J410 series) stopped working with a message on screen " HP Deskjet 1050 J410 series was not found". But the Printer was working fine. I have so far taken following steps with results against each -
    a) HP Print & Scan doctor (HPPSdr.exe) showed HP Twain Scan faulty.
    b) On advice from HP helpline, tried HP Deskjet Full Feature Software & Drivers (DJ1050_J410_1313.exe). It required uninstalling before installing. But uninstalling failed to happen.
    c) Finally, with HP Printer Install Wizard (hppiw.exe) help it showed that Full Feature HP Software & Drivers is now installed. For its functionality, it called for its testing on 'print test page' and 'test scan'. After this, printer shows printing jobs in queue but will not print. At present it is limited to photocopying only without printing & scanning.
    d) I am caught in a loop, because at the end of hppiw.exe message is '...if tests are not successful, HP recommends using HPPSdr.exe to diagnose and fix any problem' i.e. back to point (a) above.
    Any solution to the above problem?

    Hi there @sukuma ,
    I can see that you have a thread open with @Futoji in regards to the issue however, no response. I would suggest completing his troubleshooting recommendations and reply back to continue the troubleshooting efforts. I hope that helps you!
    Here is the link to your other thread: Troubleshooting Thread
    Have a great day
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • Is it possible to connect HP DESKJET 1510 All-in-One series Wireless printer without USB cable?

    my mom recently bought me the HP DESKJET 1510 All-in-One series so i have an at home printer for school work. but when we bought it we did not know there was a certain USB that had to connect to the printer. so we bought the wrong one. now i have a project due and i cannot print. we have a small USB that fits it but its hard to connect it to the computer and printer because its so small. so if we can have it sent to the printer without the USB that would be perfect!

    Hi,
    No, in many cases printers won't come with USB cables. You need a cable which is similar to the following one:
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Download deskjet f380 all in one driver and printer

    windows 7  64   installed on my computer sucessfully.
    i was downloading hp deskjet f380 all in one  driver and software off HP website and
    lost electricity to computer before completed.   Then computer tried to recover
    cleanupprogress rollback and was removing unnecessary components and the computer
    appeared to  be working but stuck at 45% progress  for 2 hrs.    obviously something is wrong.
    any ideas what to do?

    Hello there Beezntrees,
    We have a great many bundles that offer our customers some savings when in need of purchasing multiple devices. With so many options to choose from, our sales associates should be able to direct you in the right direction to get you set up with devices that meet your needs. It is discouraging to hear that it took a few visits to the store with a couple exchanges to get you to where you should have been left after one.
    I am glad to hear that you were able to speak with a manager at the store, and that she offered you a resolution to this experience. I have some further information for you, which I would like to provide to you in a private message. You can check your private messages after you have signed into the forum by clicking the envelope icon in the top right corner of the page.
    Sincerely, 
    Tasha|Social Media Specialist | Best Buy® Corporate
     Private Message

  • My HP psc 1210 all-in-one, suddenly stopped printing any text. it will print the graphics.

    I believe I have tried everything. The HP psc 1210 series all-in-one refusses to print text. nor will it scan or copy. I have done all the troubeshooting that I can find. Still will not print from PC or copy. I think it will scan to the computer. Icon with gray circle around it, states it is offline, yet from the control panel, printer and faxes, shows it as being online and ready. What else can I do to remedy this problem? Thank you in advance.

    There may be 2 separate issues here.
    -For the offline portion, check this document out:
    Printer is offline
    -For just printing graphics, this would make me think that the Black cartridge is empty/low on ink/malfunctioning. Try printing a black and white picture. That would let you know if it is the cartridge or not.
    007OHMSS
    I was a support engineer for HP.
    If the advice resolved the situation, please mark it as a solution. Thank you.

  • My brand new HP Deskjet 1510 all-in-one series Cant print

    This new HP 1510 All in one series that I just bought is not consistent in printing and most of the times it picks the paper and makes a bipping sound and then stops. It will then give a printing error report and spit out the paper with no print. This is driving me crazy. I have uninstalled and installed a couple of times but the problem persists. At times it prints and at times it doesn't. you can barely tell when it is going to print and most of the times it doesnt. I really need suggestions please

    Hello there @Drawingston , welcome to the forums
    I read your post about your Deskjet 1510 not printing consistently from your Windows 8.1 system, and when it prints, the pages are blank. I will surely try to help you!
    I would suggest that you try a few things, they are:
    Run the Print and Scan Doctor. This diagnostic tool will check for any conflicts that could be causing the issue. The tool will show you a report at the end. Please send me the results in a screen shot or write them in a response.
    Try a different USB cable that runs directly from the back of the printer, to the PC.
    Click this guide and try cleaning the paper rollers: The Printer Does Not Pick Up or Feed Paper
    Reset the printer and make sure the printer is plugged in directly to the wall outlet, avoiding power bars and surge protectors.
    Try printing again from more than one program.
    Let me know all of the results
    Good luck!
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • Deskjet 3050 All-In-One J610 only prints blank pages

    Hi,
    All of a sudden, my printer stopped printing. The ink levels in the cartridges look fine in the HP utlity, and I did the self-cleaning steps, but when I print something, only a blank page comes out. There is some ink around the edge of the paper, though, but nothing on the actual page.
    Any idea how I can fix this?
    Thanks.

    Hello jennydel,
    Welcome to the HP Support Forums!
    Cleaning the printheads is a great way to resolve print quality issues on the Deskjet 3050. On the cleaning page, does anything print on it?
    In this HP document: Fixing Ink Streaks, Faded Prints, and Other Common Print Quality Problems you will see the full HP suggested troubleshooting steps. I hope they are able to help get the printer working again.
    Thanks for posting.
    JERENDS
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • I have a hp deskjet 2050 all-in-one j510 series printer wired it and ran cd still not printing what

    i have rechecked wires not sure what i did printer will not print please help

    Hi, Yesterday I bought the above printer and installed it on my Windows XP but when I click for the printer to print there is an error messsage that comed up bizsupport2.austinhp.. I have no idea what this means all I know is my printer is not printing
    Can someone please give me any help
    Thanks

  • My HP Officejet J6480 All-In-One has started printing multiple pages.

    All of a sudden my officejet J6480 printer is printing multiple pages every time I print.  I've made sure it is saying only 1 copy, but it still continures printing the extra pages.

    Disconnect the power cable and the usb cable from the computer. Restart both the printer and the computer. Clear the print que. Fan all the pages in the printer. Power on the printer connect the usb cable and try printing again. Happy Printing
    The HP Print and Scan Doctor will guide you through troubleshooting your network printer setup and connectivity problems.  It also provides you with a wealth of information regarding your network and, in some cases, automatically fixes network connectivity issues.
    The HP Print and Scan Doctor runs on Windows XP, Vista, Win 7, and Win 8.  You will need administrator privileges in order to run the utility.
    Get it here:  HP Print and Scan Doctor
    Say "Thanks" by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as "Accepted Solution"
    (Although I am employed by HP, I am speaking for myself and not for HP)

  • I have a HP deskjet 3050 All-In-one J610 series printer.

    How long do I have to wait for the printer to find the IP address? If I want to do it manually what are the 3 IP addresses?

    I would manually clean the contacts on the cartridges and inside the printer. That process is outlined for your model of printer in step three of this document here.  The rest of the document does not apply to your issue, but it does a great job on giving step by step instructions  on the manual cleaning process and lists the materials that one needs to use. The manual cleaning will help insure that build up on the contacts is not the cause of the print quality issue that you are having. I hope that this helps. 
    I am a former employee of HP...
    How do I give Kudos?| How do I mark a post as Solved?

Maybe you are looking for

  • ABAP and JAVA stack on different SP Level

    Hi We tried to move our XI System on SP 21 and we managed to do so for ABAP stack on 21, while Java is still in 19. Will it make a difference and any problem will occur, is there any Notes/Link in this regard for a matrix to prove that inconsistency

  • Reports in DMS

    Dear All, I wanted to know, what are all the reports (Std) available in SAP, For DMS, and related to it. Or where to find it. Regards Raghu

  • Displaying a graph in a seperate VI

    I want to display a graph in seperate window (VI) but I also like to enable/disable this window. Is there a possibility to switch on or of the VI's frontpanel from within the program? Johan van Hespen

  • Acrobat 8 - Where the window opens

    Is there a way to make Adobe open up a page in a different location than the upper left hand side? I read alot of drawings and need it to open up in the lower right hand side of a page? Thanks

  • Wrong Cost Estimate error

    Hi, While we are running Cost Estimate through tcode CK11N, amount seems to incorrect. In Material Master Moving price is showing differ than after showing Cost Estimate. If Material Master showing Moving price 100.00, then during cost run why it is