HP DESKJET INK ADVANT K209a-z, extraction fialed : error message "0 cannot open output file"

D/Sir,
I have extracted hp deskjet int advant k209a-z driver using 7zip.
I was getting the error "Extraction Failed: Cannot Open Output File".  
On extract with 7-zip, I get the message: 
    0 can not open output file "<folders>/Autorun.inf" 
I am on business laptop with Windows XP but tried with Admininstrator login as well.
Please help me. How to extract it sucessfully?

That type of error message may be indicative of a bad file. Did you download it on the web? If so, try again, but do not use a download manager or program to do it, those can occasionally cause problems with compressed files.
It could be possible, also, that some sort of security program on your laptop is blocking the extraction process. If that is the case you should be able to find some error in the Windows event viewer through the control panel.
007OHMSS
I was a support engineer for HP.
If the advice resolved the situation, please mark it as a solution. Thank you.

Similar Messages

  • "Extraction Failed: Cannot Open Output File" error message when installing new drivers

    Hello, I'm trying to install new drivers for my HP Photosmart C4385 Printer.  I downloaded the full feature drivers for Windows XP 32-bit, and when I start to install (extract), I get the error message:
    Extraction Failed
    Cannot Open Output File
    And the process closes.  It happens at about 85% extraction every time.
    Any idea why?  I called HP but since it is out of warranty they wanted money, which I think as absolutely ridiculous - won't even give me basic support??  Poor, poor customer service.
    This question was solved.
    View Solution.

    Hi,
    If you haven't still got the  Full Feature software installer, download it from the link below and save it to your Desktop.  If you already have it, place it on your Desktop.
    ftp://ftp.hp.com/pub/softlib/software10/COL20274/mp-53147-4/100_228_PS_AIO_02_Full_USW_enu_NB.exe
    Make sure the Printer is disconnected from your PC.
    Download and install 7-ZIP.  Once installed, right click on the software installer for your printer, select 7-Zip and choose extract files, then click Ok.
    Open the newly extracted folder and double click the setup application to start the installation ( the setup application will probably have the same icon as the original software installer you downloaded ).  Connect the printer to your PC when the software asks.
    Hope this helps.
    Best wishes,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • I just tried to update Firefox to version 9.0.1. It got to 13% extracting, then I got an error message, Cannot Open Output File. Can you please help me?

    I just tried to update Firefox to version 9.0.1. It got to 13% extracting, then I got the error message, Cannot Open Output File.

    The file could be downloaded incorrectly. Could you redownload it again from [http://getfirefox.com http://getfirefox.com]?

  • Firefox setup 9.0.1 exe won't extract (cannot open output file)

    I downloaded firefox 9.0.1 and it won't extract and install on a win7 computer. It says cannot open output file. I had previous versions of firefox for 10 years. I tried disabling AV and firewall also. Please help. Nate

    Thank you! My solution was slightly different, but in the end, seeing what was going on in the Help menu in the browser did the trick. Turned out I had been stuck for who knows how long "downloading" a version 3! Also had a toolbar to disable but not the Ask.

  • Tried to install Firefox but an error message "Extraction failed - cannot open output file" always pops up, without a reason. Why's this happening?

    Tried to install Firefox but an error message "Extraction failed - cannot open output file" always pops up, without a reason. Why's this happening?

    Try to disable your anti-virus software temporarily to see if that makes it work.
    You may need to delete the temp folder (%TEMP%) to remove the old files.

  • Trying to update - extraction failed; cannot open output file

    firefox working fine; tried to update; lost FF, now receiving this error message.

    Hi,
    If you haven't still got the  Full Feature software installer, download it from the link below and save it to your Desktop.  If you already have it, place it on your Desktop.
    ftp://ftp.hp.com/pub/softlib/software10/COL20274/mp-53147-4/100_228_PS_AIO_02_Full_USW_enu_NB.exe
    Make sure the Printer is disconnected from your PC.
    Download and install 7-ZIP.  Once installed, right click on the software installer for your printer, select 7-Zip and choose extract files, then click Ok.
    Open the newly extracted folder and double click the setup application to start the installation ( the setup application will probably have the same icon as the original software installer you downloaded ).  Connect the printer to your PC when the software asks.
    Hope this helps.
    Best wishes,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • HP Deskjet Ink Advantage K209a-z - driver for Windows 8 Consumer Preview

    1. Product name and number: HP Deskjet Ink Advantage K209a-z, CH368
    2. Operating system: Windows 8 Consumer Preview (64-bit)
    3. Error message: "The driver for Deskjet Ink Advant K209a-z is not installed. Install the latest driver for the device."
    4. Any changes made before: Computer has been in repair and new operating system was installed (Win8 CP). I worked on Windows XP before repair and printer was going without any troubles.
    5. I'd like to know when the driver will be available for Windows 8 Consumer Preview.

    Hey Krzyskos,
    I suggest using the HP Windows 8 Install Utility for the best chance to get the printer working on Windows 8 preview. As for the drivers, the release of the Windows 8 drivers are expected to be after the office release of Windows 8. 
    The above link will direct you to the Windows 8 section where you should address any further Windows 8 questions.
    Take care!
    Sean
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

  • HP Deskjet Ink Advantage K209a Driver not found when installing windows 8

    MY  PRINTER " HP Deskjet Ink Advantage K209a"  OPERATING SYSTEM  Windows 8 32 bit
    Driver not found when installing windows 8 .So,please give me a suggestion & give me new driver for win 8.
    [Personal Information Removed]
    Please give me a suggestion

    Hey 101214,
    I see you have a Windows 8 PC and a Deskjet Ink Advantage All-in-One printer (K209a).  I also see that you need a driver link for this OS and Printer.  Please follow the link below to download the driver for this printer/OS combo.
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=al-109242-1&cc=us&dlc=en&lc=en...
    If you need information on how to perform the USB installation on your Windows 8 PC please click here.
    I wish you the best!
    Jason
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
    I am not an HP employee.

  • Deskjet ink advantage k209a-z

    I have a deskjet ink advantage k209a-z printer. Pl.inform is there any procedure to print from android mobile... I have moto-e mob...Thank you..
    -Varma

    Hi Verma,
    The answer to yoru question is No.
    The K209 model is a USB only printer:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01664517&cc=us&dlc=en&lc=en&product=3811365&que...
    As you may find listed below, printing from a mobiel device is only supported for pritners with network support, a such is not avaiable for your printer:
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c03679829&lc=en
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • I downloaded 4.0 but it won't install. It keeps saying Extraction Failed Can not open output file. HELP!

    Download of the new 4.0 won't install. It keeps saying Extraction Failed Can not open output file.

    Oh? That's "reset youtr laptop"?
    Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. 

  • While extracting file during restore, device disappear from iTunes; then error message "device cannot be found" pop up

    After failing to update iphone OS, now iphone is in restore mode
    Device Manager recognize USB is connected to iphone with Location: Location 0 (Apple Mobile device (recovery mode))
    IPhone in "connect to itunes" screen
    After connect to itunes, message "itunes has detected iphone in recovery mode. You must restore this iphone before it can be used with itunes." appear.
    In Device -> iphone screen, after clicking "Restore" button, itunes status become "Extracting software..."
    During extracting software process, iPhone change from "connect to itunes" screen to just "apple logo", then go back to "connect to itunes" screen; but at the same time device-iphone disappear from itunes; once itunes complete extracting software, error message comes out "The iphone "iphone" could not be restored. The device cannot be found"
    Tried again few times with all USB device removed & turn off all the anti-virus software and all other non window / non-apple softwares; but same thing happened.
    so now I'm stuck.... please help.

    after reading loads of forum, I didn't find anyone with the exact issue as mine. But I've followed some of the restore issue solution and now I've fixed my phone. Yeah! maybe not all the steps are necessary, but here was what I've done to fix it:
    1.     update itunes
    2.     Ensure Apple Mobile device driver is updated and work (i.e. iphones is detected in device manager)
    3.     run "msconfig", ensure all other non microsoft / non apple softwares are off
              - Services: only enable all microsoft services, apple mobile device and bonjour service
              - Startup: only enable QTTask & iTunesHelper
    4.    Restart computer
    5     turn on itunes
    6.    connect iphones via USB.
    7.     itunes show iphone in device column, but iphone still stay in "connect to itunes" screen
    8.     Hold Sleep button + Home button until the screen goes dark (iphone disappear from itunes device column at the same time), then just keep holding the home button (without holding the sleep button)
    9.     first time, though itunes showa iphone in the device column again, but iphone screen go from apple icon straight to "connect to itunes" screen and stay there again.
    10.     I repeat step 8, this time though itunes show iphone in the device column again, but the iphone screen stay dark showing nothing (instead of showing "connect to iTunes" screen)
    11.     then I click restore in itunes, this time it manages to finish extracting software without iphone restarting itself during the process; itunes find the iphone and complete the restore.
    12.     As I do backup all the time, now I just need to sync all the files / setting back to iphone, everything back to normal again.
    still not sure what happened to my phone, but now it's fix =>

  • Core dump when starting extract, no error messages

    Hello,
    This is a basic one way replication, Data Pump and Replicat start but Extract stops at once.
    In ggserr.log there's only a message: EXTRACT EORATE02 starting, nothing else. In ggsci it can be seen that it's stopped.
    CHECKPARAMS didn't give the message "Parameters processed successfully", neither did it give error messages
    when starting the extract.
    There are no old Oracle processes which could prevent Extract from starting.
    There's EORATE02.pce in dirpcs, although EORATE02 is not running. If I delete it and try to start the extract,
    the extract will immediately stop.
    A core file has been created in GG_HOME when trying to start the extract. I haven't been able to find out how to read it.
    Source and target are on Aix 6100-06. The source database is Oracle 10.1.0.5, target database is Oracle 11.2.0.3.
    The installation files are V32435-01.zip for db 10.1.0.5 (ggs_AIX_ppc_ora10.1_64bit.tar), V32437-01.zip
    for db 11.2.0.3 (ggs_AIX_ppc_ora11g_64bit.tar). This is GoldenGate 11.2.1.0.1.
    The db:s are on Asm.
    There's only 1 table in source, 1 in target, they are identical and empty.
    There's enough space in the OS.
    If I run the extract in OS (extract paramfile dirprm/eorate02.prm), it ends like this without more information:
    TRANLOGOPTIONS ASMUSER ggs_owner@HOSTNAME:1521/+ASM , ASMPASSWORD *********
    Abort(coredump)
    This happens in both ways of extract described below.
    (1)
    EXTRACT EORATE02
    USERID ggs_owner, PASSWORD [PASSWORD]
    EXTTRAIL ./dirdat/data02/te
    TRANLOGOPTIONS ASMUSER ggs_owner@HOSTNAME:1521/+ASM , ASMPASSWORD [PASSWORD]
    TABLE USER.myobjects2;
    (2)
    EXTRACT EORATE02
    USERID ggs_owner, PASSWORD [PASSWORD]
    EXTTRAIL ./dirdat/data02/te
    tranlogoptions COMPLETEARCHIVEDLOGONLY ALTARCHIVELOGDEST /backup/arch_log/abcd/ABCD/archivelog
    TRANLOGOPTIONS ASMUSER ggs_owner@HOSTNAME:1521/+ASM , ASMPASSWORD [PASSWORD]
    TABLE USER.myobjects2;
    Here's more information on this setup and commands which have been used:
    add extract EORATE02 tranlog begin now, threads 1
    add exttrail ./dirdat/data02/te, extract EORATE02, megabytes 5
    EXTRACT EPMPTE02
    PASSTHRU
    RMTHOST HOSTNAME, MGRPORT 13447
    RMTTRAIL /u01/app/oracle/gg11210/for_11g/dirdat/data02/tr
    TABLE USER.myobjects2;
    ADD EXTRACT EPMPTE02 EXTTRAILSOURCE ./dirdat/data02/te
    ADD RMTTRAIL /u01/app/oracle/gg11210/for_db11/dirdat/data02/tr EXTRACT EPMPTE02, MEGABYTES 5
    Target
    REPLICAT RORATE02
    USERID ggs_owner, PASSWORD [PASSWORD]
    HANDLECOLLISIONS
    ASSUMETARGETDEFS
    DISCARDFILE ./dirrpt/RORATE02.DSC, PURGE
    MAP USER.MYOBJECTS2, TARGET USER.MYOBJECTS2;
    add replicat RORATE02, exttrail /u01/app/oracle/gg11210/for_11g/dirdat/data02/tr
    add checkpointtable ggs_owner.ggschkpt
    Grants
    Source:
    grant connect, resource to ggs_owner;
    grant select any dictionary, select any table to ggs_owner;
    grant create table, alter any table to ggs_owner;
    grant flashback any table to ggs_owner;
    grant execute on dbms_flashback to ggs_owner;
    grant execute on utl_file to ggs_owner;
    grant create session, alter session to ggs_owner;
    Target:
    grant create session, alter session, resource, connect, select any dictionary to ggs_owner;
    grant select any table, insert any table, update any table, delete any table to ggs_owner;
    grant create table, alter any table, lock any table to ggs_owner;
    Source
    ALTER DATABASE ADD SUPPLEMENTAL LOG DATA (ALL) COLUMNS;
    ggsci add trandata USER.myobjects2
    mgr.prm
    --GoldenGate Manager parameter file
    PORT 13346
    Target
    GLOBALS
    CHECKPOINTTABLE ggs_owner.ggschkpt
    mgr.prm
    --GoldenGate Manager parameter file
    PORT 13447
    Thanks for reading this far. Possible comments will be much appreciated!
    Best regards
    Edited by: user11323660 on 14.6.2012 6:39
    Edited by: user11323660 on 14.6.2012 6:41

    Hello,
    Could you wrap your process definitions in proper code brackets so its easier to understand.
    Also I'm not sure what your problem is other then you are receiving core dumps. I'm happy to help.
    Two small comment though regarding your ASM config
    1 . Dont not use ggs_owner as the asm user
    TRANLOGOPTIONS ASMUSER ggs_owner@HOSTNAME:1521/+ASM , ASMPASSWORD *********2. Create a TNSNAMES entry for your ASM instance and tehn use the following:
    TRANLOGOPTIONS ASMUSER SYS@ASM, ASMPASSWORD *****Also here is an example of an extract process that I've setup on RAC database with ASM
    EXTRACT EWFMMTLP
    EXTTRAIL ./dirdat/ew
    USERID GGATE@MY_DB, PASSWORD ggatehcc
    DDLOPTIONS ADDTRANDATA RETRYOP RETRYDELAY 20 MAXRETRIES 5 REPORT
    TRANLOGOPTIONS EXCLUDEUSER ggate
    TRANLOGOPTIONS ASMUSER SYS@ASM, ASMPASSWORD ****
    TRANLOGOPTIONS ALTARCHIVELOGDEST /u02/oracle/fast_recovery_area/MY_DB/archivelog
    TRANLOGOPTIONS PURGEORPHANEDTRANSACTIONS
    STATOPTIONS RESETREPORTSTATS
    REPORT AT 00:01
    REPORTROLLOVER AT 00:01
    REPORTCOUNT EVERY 60 SECONDS, RATELet me know if that helps
    Jan S.

  • Cannot extract fonts error message even after fonts outlined

    will not allow me to attach screen shot from grab. Image not allowed is error message

    Grab saves files to tif format, you need a web format (jpg, png, gif) to post to these format. Rather than grab use preview app.
    preview application >> file >> take screen shot >> save as file type png
    Now the cannot extract fonts error, could be fixed possibly by an illustrator free update, don't know the verison you are on
    http://www.adobe.com/support/downloads/product.jsp?product=27&platform=Macintosh
    Reset your illustrator your prefs.
    Does this happen to all files, or is this just a certain file. You may have a font in a symbol or opacity mask.
    Save a copy of the document, keep deleting items, unitl the error goes away. This will identify the problem item, of which we better help you by narrowing the variables down.
    When fo you get thgsi error, upon opening the file?

  • Deskjet 6940 - multiple black cartridge 96 installation error messages

    I have a new Deskjet 6940.  I installed the black 96 cartridge.  Printer keeps saying it is not installed correctly.  I cleaned the cartridge, ran the jet/bubble test.  Finally I replaced the cartridge, same installation error message.  I do not get the error message for the color 97 cartridge. Is this problem common to the 6940?  Not sure what my options are.  Thanks

    have the same problem. We installed cartiridge and did a test page by holding power and cancel buttons at same time. Nothing is showing up for the black cartridge. Maybe cleaning something would help, but I can't find any information on how to access the information using Vista.

  • Hp deskjet ink advantage k209a-z

    how do i scan a set of papers continously in one file please help me with regard to this.

    Hello sudhasubramani2,
    Welcome to the HP Forums.
    I see that you are attempting to scan a multiple page document into one file.
    I do have a steps that we can take to get this issue resolved however, I am going to need the operating system you are using on your computer.
    Please respond with which Operating System you are running:
    Which Windows Operating System am I running?
    Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
    Write me back when you have time and I will be happy to help.
    Cheers,  
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

Maybe you are looking for