HP Deskjet Ink Advantage3545 all-in-one printer....Print Filter Pipeline Host Error

I have HP Deskjet Ink Advantage 3545 all-in-one printer
It has encountered _Print Filter Pipeline Host Error .
What should be done as a remedy ..............

Hi Rish
I found this and thought it might help
http://h30434.www3.hp.com/t5/Printer-All-in-One-Install-Setup/Print-filter-pipeline-host-stopped-wor...

Similar Messages

  • Deskjet 3056A E-all-in-one not printing black ink properly

    Hello, I've had my Deskjet 3056A E-all-in-one printer for 2 years and didn't have any problems until about 3 months ago. My black ink cartridge suddenly stopped printing properly. It started to seem like I needed to replace the ink, so I did, but that did not fix the problem. It still seems like the ink level is really, really low sometimes, but it's a brand new cartridge. I couldn't even align the printhead because the black ink wouldn't print. Then I cleaned the printhead and cleaned the ink smear. When the test papers printed after the cleanings the black ink would only print half of the line of letters or numbers, or it was just choppy and faded. I checked the ink levels and it says both of my ink cartridges are almost full still. I was thinking about replacing the cartridge again, but I don't want to waste the money if it won't fix the problem. The color cartridge works completely fine, just to clarify.

    If the black cartridge is in warranty you could contact HP Phone Support
    Although I am an HP employee, I am speaking for myself and not for HP.
    Twitter: @Ciara_B_HP

  • Print filter pipeline host error

    Having installed an HP 1510 All-in-One printer on a pc running Windows XP SP3 I have been unable to print anything as every attempt produces the following error message:
    Print filter pipeline host has encountered a problem and needs to close.
    As such the printer is unusable. I have since tried to install the printer on someone else's pc which also has XP SP3 running and got the exact same error.
    Is this printer REALLY compatible with XP SP3 as it doesn't look like it.

    Hello again EdwardTrunk,
    I would like to apologize for the confusion on the driver issue.
    I have located a "HP Deskjet 1510 e-All-in-One Printer series Full Feature Software and Drivers" for this product.
    Please make sure that you disconnect the usb cable from the printer and from the computer and leave it off.
    Uninstall any software for this printer that you have already attempted to install.  Once it has been removed, reboot the computer.
    When the computer is back on, please click on the above link and download the Full Feature driver to the Desktop of your computer so that it creates it's own Icon. 
    When the download is complete, double click the icon and follow the instruction. 
    Please DO NOT connect the USB cable.  The installation will Prompt you when to connect the USB cable.
    Once again I do apologize for the confusion and the inconvenience.
    If you require any additional assistance, please feel free to write me back and I will be more than happy to help.
    Thank you once again for your time.
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • HP Deskjet 3520 e-All in one printer trouble with scanning network, connection and very slow print

    Dear all
    I bought two days ago HP Deskjet 3520 e-All-in one printer serie, but i have some really bad issues with the scanner! I have searched on the internet and i couldn’t find anything to solve the problem. 
    I have installed the printer according to the book of the printer, so everything did go well(i think), except that i can’t connect the scan to my computer, a Mac OS X (i am connected with the printer). I get directed to the website where i can connect the scanner, but every time i try to connect it with wi-fi, i get two notification, one from my computer (from HP Itility (Dutch) program) that the connection is off and second from the website that i have to make sure that i’m connected with internet (which i am) and to check the IP address if it is the same with my computer (which is the same). 
    Obesely something did go wrong, but i can’t find the problem. 
    Beside when its copy or prints a document (no matter how many pages) it’s very slow. It takes 10 -15 minutes till the printer starts. Has it something to do with the problem i’ve got with the scanner or is the printer always so slow? Because the very first time, when i installed the printer, it printed very fast.
    By the way i also print the test-results to check if there is a problem, but according to test-results there are no problems at all. 
    I hope that someone recognize this problem and can help me to solve it. 
    Regards, 
    Esra

    Hello chesterpascual,
    Welcome to the HP Support Forums!
    Regarding the Deskjet 3520 and the error to use setup cartridges, you will need to call HP's Technical Support to see about sending some to you.
    Click here to locate the contact information.
    Regards,
    JERENDS
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • Hp - photosmart e-all-in-one wireless printer cn731a- nothing prints??

    HP - Photosmart e-All-in-One Wireless Printer  (CN731A)
    Went through setup on Windows 7 64-bit, printed the test photo, came out great.  Thought everything was good to go.  Later, when trying to print a document, it wouldn't print.  Computer popped up a message saying "Successfully printed" but when I went to the printer, there was nothing there.  I tried running a wireless network test on the printer's screen, and once that page printed with the results, immediately after that, the document I was trying to get finally printed.  This was an early Christmas gift for my parents, & my mom just informed me that she tried to print again today, but nothing happened on the printer.  I am out of town now and am not able to troubleshoot on my own on the printer like I did a couple days ago so came here for advice.. Any idea what the issue might be? Did I maybe miss a step after doing the test print of the photo?  Any ideas would be appreciated!

    Hello,
    Try the below steps ..
    While the printer is ON, Unplug the power cord from back of the printer.
    Disconnect all the cables that are connected to the printer.
    Wait for 30 seconds.
    Plug in only the Power Cord. ( Printer would Power on ).
    Try making a standalone Color copy of a document . If it fails to print a copy, then it could either be an issue with the Ink cartridges  or the Printer .
    Regards,
    Jabzi
    Help the community by marking this post .
    Was your question answered? Mark it as an Accepted Solution!
    See a great post? Give it a Kudos!
    I work for HP
    Regards,
    Jabzi
    Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
    Click "Accept as Solution" if it solved your problem, so others can find it.
    Although I am an HP employee, I am speaking for myself and not for HP.

  • How to connect my iPad to wireless dest 3511e all in one HP printer

    How to connect my wireless printer to my iPad HP dest jet 3511e all in one SN [Personal Information Removed]

    Hi Alicerief,
    Welcome to the HP Support Forums. I understand that you would like to know how to print from your iPad to your Deskjet 3511 printer.
    Your printer is AirPrint and ePrint capable so you should be able to use either method to print once your printer is connected to your wireless network. The instructions on connecting your printer to your wireless network can be found in your user guide. You can designate it as a wireless printer during the setup as detailed in the section "Traditional wireless connection" on page 32.  If you have already installed your printer onto your computer using a USB connection, the instructions to switch to a wireless connection can also be found on page 32 in the section titled "Change from a USB connection to a wireless network". 
    I have included several reference documents for you. The first one reviews printing from an Apple mobile device to your printer. I have also included the document on how to setup ePrint and customize the printer's ePrint email address. There are two mobile apps available from HP that will allow you to send print jobs to your printer, the HP ePrint mobile app and the HP All-in-One Printer Remote app. The AiO app will also allow you to scan from your printer to your iPad. I have included the FAQ documents for both apps.
    HP Deskjet 3510 e-All-in-One Series User Guide
    http://h10032.www1.hp.com/ctg/Manual/c03471705.pdf
    Printing from an Apple Mobile Device
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c02796271
    Setting Up a Custom Email Address for ePrint
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c02940150
    HP ePrint Mobile App FAQs
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c01923321
    HP All-in-One Printer Remote Mobile App FAQs
    https://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c03561640
    Regards,
    Happytohelp01
    Please click on the Thumbs Up on the right to say “Thanks” for helping!
    Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
    I work on behalf of HP

  • HP 6500 wireless ALL-in-one e709n Printer front panel not responding at all

    Hi there,
    I have got a HP 6500 wireless ALL-in-one e709n printer.
    I have been using it with my pc with windows vista on it for nearly 2 years and it has been great.
    1 month ago, the front panel of the printer stopped responding, ie, when i press any buttons, the lcd screen on the printer does not change, it always show the ink level.
    The printer turns on, shows that its preparing, then goes to idle state with ink level icons on the screen.
    If i try to print any documents, it works with ethernet cable connected to my pc (which i used to do it wirelessly) , the cable-connected printing function still works, but wireless printing does not work anymore. 
    However if i try to scan something, on the pc when i open the hp scan app, it shows that 'scanner is not available'.
    Also because the front panel doesnt work, no buttons respond, i cannot scan or copy.
    I have tried unplug everything and reinstall all drivers and programs.
    No damage to printer or my pc, it just stopped working all the sudden.
    Can any one help me out please?
    cheers,
    Charlie

    Hi Charlie,
    Try going throgh the steps listed below and check if that may help:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02716803&cc=us&dlc=en&lc=en&product=3795406&tmp...
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • HP Deskjet 3520 e-All-in-O​ne Printer. Help tells me to connect to computer with USB cable

    I cannot scan anything at the moment despite the fact that I was able to do so several weeks ago.  I went to the HP online support site and downloaded a scan doctor programme.  It tells me that I do not have the proper scan software on my system and to download it from the HP website.  It does't take me to the specific software I need but to a list of things I don't have so I downloaded all of this.  I am half way through the setup process for one program and it is asking me to connect the printer/scanner to my computer using a usb cable so that "the settings of your wireless network can be communicated to the printer".  I don't remember getting a usb cable with the printer but if I did I have no idea where it now is.  What are the chances that finding this/buying this will actually solve my problem and is there a way to solve them without the cable?  Any advise would be greatly appreciated.

    Hi @translator82,
    Welcome to the HP Forums!
    I noticed that your HP Deskjet 3520 is telling you to connect it to the computer with a USB cable. I am happy to help you with this connection issue!
    To download the software, please visit this website, HP Deskjet 3520 e-All-in-One Printer Drivers, if you are using Windows 7 or above, it is recommended to use the HP Printer Install Wizard for Windows. If you do not know the Operating System you are using, please visit this website. Whatsmyos.
    In the meantime, page 33 of your printer's user guide has all the options of how to connect this printer. User Guide. For the traditional wireless setup you will need a USB printer cable. Otherwise, you can always try Wireless Direct.
    Hope this helps!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • Hp 6110 all-in-one always prints in color on Windows 8

    I would like to print some color documents in grayscale. But I am finding that no matter what settings I use in the Print dialog panel, my documents always come out in color. I am in Windows 8.1. For example, in Microsoft Word, if you go to File->Print, the Settings list contains options for which pages to print, one-sided or two-sided, collated, etc., but there is nothing for color vs. grayscale. So, if you then click a "Printer Properties" link, you get the detailed 6110 dialog panel with multiple tabs containing the full range of printer options. Within that, if you select the "Color" tab, you can check the "Print in Grayscale" box. Click "OK" to close the detailed printer dialog, which brings you back to the Microsoft Word printer dialog, where you can then click "Print". Document still comes out in color. I have verified a similar behavior when priting color PDF documents - there is no way to make them come out in grayscale.
    I suspect the driver is also not respecting my specification to use "Fast Nornal" print quality.
    So, a very clever strategy for HP to sell more ink! Can you please provide a fix?
    Thanks

    Hi @UsedToWorkInHPL,
    Welcome to the HP Forums!
    I understand that your HP Officejet 6110 all-in-one always prints in color on Windows 8. I am happy to look into this for you!
    According to your printer's specifications found at this website, Printer Specifications for HP Officejet 6100 Printer Series. This printer is only supported for these Operating Systems: Windows 98, Windows 98 SE, Windows 2000, Windows Me, Microsoft(R), Windows XP.
    There is no full feature software and drivers for Windows 8.1 for this printer.
    One option to try and get around this, is to assign an alternate driver, please see this post, How to Assign Alternate Print Drivers in Different Versions of Windows, by @Shane_R.  
    Otherwise, I would recommend to please call our phone support at 800-474-6836 for your upgrade options to a printer that has the software and drivers available for Windows 8.1. If you live outside the US/Canada Region, please click the link below to get the support number for your region. Country-language selector.
    Hope this information helps, and have a great day!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • Question for Deskject 3520 e-all in one re: printing fonts and one sheet preference

    For a Deskjet 3520 e - all in one - printing from Ipad -How do I adjust fonts and make my printer print one side only ?

    HI millchea,
    Are you printing from an app or printing using airprint ? 
    What exactly are you trying to print ? ( email, webpage, ect....)
    Here is an article about how to change font size and enable screen zoom. You can only change font size for mail, calendar, and notes app. For other applications you need to change font size directly from the app itself. Listed in this article are directions and screenshots to help you do this. 
    If I helped you at all it would be great if you clicked the blue kudos star!
    If I solved your post please mark it as solved to help others.
    I'm a printer tech with HP.

  • Where is the IP number for a HP deskjet 3520 e-all-in-one, needed to install into windows 7?

    Where is the IP number for a HP deskjet 3520 e-all-in-one, needed to install into windows 7?

    Hi - You can print a test page to get the IP address for your printer.  Follow these instructions:
    On the printer control panel, press the Wireless button ( ), and then press the button ( ) next to Settings .
    Press the Down Arrow ( ) to select Print Report , and then press OK .
    Press the Down Arrow ( ) to select Test Report , and then press OK .
    The printer prints the test page.
    Hope that helps.
    Say Thanks by clicking the Kudos thumbs up. Please mark the post that solves your problem as an Accepted Solution so other forum users can utilize the solution.
    I am an HP employee.

  • My 4215 all in one HP printer error message suddenly reads "remove and check right cartridge" .

    My all in one 4215 printer suddenly is flashing an error message in the screen saying "remove and check right cartridge"...For what I am checking it is unclear. I have removed and reinstalled the cartridge and it looks OK to me...It is not empty, and the last thing it printed was fine...Help!
    This question was solved.
    View Solution.

    I'm betting that the contacts inside the printer or on the ink cartridge are dirty. This happens over time. The document below will walk you through cleaning the contacts. Let me know what happens.
    http://goo.gl/9oXc9
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

  • Can I share HP PSC 1610 All-In-One series printer through Bonjour?

    I have an iBook G4, and a Mac Mini (10.4.11- Tiger) with a HP PSC 1610 All In One series printer connected to it by USB. On my iBook G4, the printer comes up under Shared Printers in the Printer Setup Utility but when I click on it, and press Show Info it freezes.. so I was wondering, is there a way to connect to the printer wirelessly with the correct driver (because the driver doesn't show up in the driver list... and the driver is installed.)

    Hi my printer psc 1610 hp not picking paper

  • The HP C4480 all in one series PRINTER that I got free with my i-Mac is printing TINY print despite that my computer is set at 13 font Helvetica. How to reset the printer to normal print?

    The HP C4480 all in one series PRINTER that I got free with my i-Mac is printing TINY print despite that my computer is set at 13 font Helvetica. How to reset the printer to normal print?

    Is the Paper Size: set to US Letter and Scale: set to 100%
    Dennis

  • Problem with drivers for HP B109 a-m all-in-one, have printer working but not scanner in windows 8

    Still have a problem with the drivers in Windows 8 release preview, for my HP B109 a-m all-in-one, have printer working but not scanner, is there any chance of a fix before final release of Windows 8 ?.

    Review my post here:
    http://h30434.www3.hp.com/t5/Windows-8-Release-Preview/SOLUTION-Get-Win-7-Printer-Drivers-HP-Solutio...
    And see if something similar will work for you.

Maybe you are looking for