HP Deskjet printer won't print after 7.6 FW installed.
This used to work wth 7.5; after updating to 7.6 nothing gets printed; I have deleted/recreated the printer via Bonjour but no luck yet. Can anybody please shed some light?
Thanks!
Fernando
Hello , and welcome to the HP Forums, I hope you enjoy your experience! I see you're having issues with your printer. I would love to try and help you, but I do need a little information first. I am linking a few HP Support documents below that will show you how to find which operating system you are using. Also, if you're using Windows, please include whether your operating system is 32-bit or 64-bit.
Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
Which Windows operating system am I running?
Is the Windows Version on My Computer 32-bit or 64-bit?
Also, do you have any issues when you make a copy?
Are you experiencing any errors? Please let me know. Thanks for posting on the HP Forums!
Similar Messages
-
my iphone won't work after fatal error occurred installing iOS5.1 have followed allsteps to reconfigure software onto windows still no phone just a usb and itunes picture on screen
Connect the phone directly to the computer, not a hub.
Disconnect all other USB devices except keyboard and mouse.
Disable your firewall
Disable your antivirus
In iTunes if it recognizes the phone click "Restore"
If it doesn't recognize the phone:
Disconnect the phone from the phone end, leave the USB cable plugged into the computer
Hold the HOME and SLEEP buttons until the screen turns black, excactly 10 seconds, then release the SLEEP but continue holding the HOME (If an Apple logo appears you have held SLEEP too long; do it over)
While holding HOME connect the cable to the phone
As soon as iTunes recognizes the phone release the HOME button and it should restore.
If neither procedure works note the exact error message and post it. -
Xorg won't start after unsuccessfully trying to install bumblebee
Before i tried to install bumblebee I was just running on the integrated intel graphics chip (intel HD graphics 3000). During the installation of bumblebee, I first tried with the nouveu driver for the nvidia graphics card, but that resultet in an error when trying to run anything with optirun. Then i tried the proprietary nvidia drivers, but after a reboot the X server would not start.
I have removed both nvidia drivers, nouveu drivers, bumblebee and set graphics to integrated in the bios again, but the problem persists. Here is my Xorg log file:
[ 22.722]
X.Org X Server 1.14.2
Release Date: 2013-06-25
[ 22.722] X Protocol Version 11, Revision 0
[ 22.722] Build Operating System: Linux 3.9.7-1-ARCH x86_64
[ 22.722] Current Operating System: Linux eddie 3.9.9-1-ARCH #1 SMP PREEMPT Wed Jul 3 22:45:16 CEST 2013 x86_64
[ 22.722] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=95ccfb37-7f71-4703-8aa0-e3d7b53aba66 ro quiet
[ 22.722] Build Date: 01 July 2013 10:48:42AM
[ 22.722]
[ 22.722] Current version of pixman: 0.30.2
[ 22.722] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 22.722] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 22.722] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Aug 13 16:28:59 2013
[ 22.839] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 22.951] (==) No Layout section. Using the first Screen section.
[ 22.952] (==) No screen section available. Using defaults.
[ 22.952] (**) |-->Screen "Default Screen Section" (0)
[ 22.952] (**) | |-->Monitor "<default monitor>"
[ 22.952] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 22.952] (==) Automatically adding devices
[ 22.952] (==) Automatically enabling devices
[ 22.952] (==) Automatically adding GPU devices
[ 23.083] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 23.083] Entry deleted from font path.
[ 23.084] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 23.084] Entry deleted from font path.
[ 23.084] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 23.086] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 23.086] Entry deleted from font path.
[ 23.086] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 23.086] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 23.086] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 23.086] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 23.099] (II) Loader magic: 0x7fdc20
[ 23.099] (II) Module ABI versions:
[ 23.099] X.Org ANSI C Emulation: 0.4
[ 23.099] X.Org Video Driver: 14.1
[ 23.099] X.Org XInput driver : 19.1
[ 23.099] X.Org Server Extension : 7.0
[ 23.101] (--) PCI:*(0:0:2:0) 8086:0116:1025:0504 rev 9, Mem @ 0xb0000000/4194304, 0xa0000000/268435456, I/O @ 0x00002000/64
[ 23.122] Initializing built-in extension Generic Event Extension
[ 23.122] Initializing built-in extension SHAPE
[ 23.122] Initializing built-in extension MIT-SHM
[ 23.122] Initializing built-in extension XInputExtension
[ 23.122] Initializing built-in extension XTEST
[ 23.123] Initializing built-in extension BIG-REQUESTS
[ 23.123] Initializing built-in extension SYNC
[ 23.123] Initializing built-in extension XKEYBOARD
[ 23.123] Initializing built-in extension XC-MISC
[ 23.123] Initializing built-in extension SECURITY
[ 23.123] Initializing built-in extension XINERAMA
[ 23.123] Initializing built-in extension XFIXES
[ 23.123] Initializing built-in extension RENDER
[ 23.123] Initializing built-in extension RANDR
[ 23.123] Initializing built-in extension COMPOSITE
[ 23.123] Initializing built-in extension DAMAGE
[ 23.123] Initializing built-in extension MIT-SCREEN-SAVER
[ 23.123] Initializing built-in extension DOUBLE-BUFFER
[ 23.123] Initializing built-in extension RECORD
[ 23.123] Initializing built-in extension DPMS
[ 23.123] Initializing built-in extension X-Resource
[ 23.123] Initializing built-in extension XVideo
[ 23.123] Initializing built-in extension XVideo-MotionCompensation
[ 23.123] Initializing built-in extension XFree86-VidModeExtension
[ 23.123] Initializing built-in extension XFree86-DGA
[ 23.123] Initializing built-in extension XFree86-DRI
[ 23.123] Initializing built-in extension DRI2
[ 23.123] (II) LoadModule: "glx"
[ 23.206] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 23.376] (II) Module glx: vendor="X.Org Foundation"
[ 23.376] compiled for 1.14.2, module version = 1.0.0
[ 23.376] ABI class: X.Org Server Extension, version 7.0
[ 23.376] (==) AIGLX enabled
[ 23.376] Loading extension GLX
[ 23.376] (==) Matched intel as autoconfigured driver 0
[ 23.376] (==) Matched vesa as autoconfigured driver 1
[ 23.376] (==) Matched modesetting as autoconfigured driver 2
[ 23.376] (==) Matched fbdev as autoconfigured driver 3
[ 23.376] (==) Assigned the driver to the xf86ConfigLayout
[ 23.376] (II) LoadModule: "intel"
[ 23.416] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 23.511] (II) Module intel: vendor="X.Org Foundation"
[ 23.511] compiled for 1.14.2, module version = 2.21.14
[ 23.511] Module class: X.Org Video Driver
[ 23.511] ABI class: X.Org Video Driver, version 14.1
[ 23.512] (II) LoadModule: "vesa"
[ 23.512] (WW) Warning, couldn't open module vesa
[ 23.512] (II) UnloadModule: "vesa"
[ 23.512] (II) Unloading vesa
[ 23.512] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 23.512] (II) LoadModule: "modesetting"
[ 23.512] (WW) Warning, couldn't open module modesetting
[ 23.512] (II) UnloadModule: "modesetting"
[ 23.512] (II) Unloading modesetting
[ 23.512] (EE) Failed to load module "modesetting" (module does not exist, 0)
[ 23.512] (II) LoadModule: "fbdev"
[ 23.512] (WW) Warning, couldn't open module fbdev
[ 23.512] (II) UnloadModule: "fbdev"
[ 23.512] (II) Unloading fbdev
[ 23.512] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 23.512] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, HD Graphics,
HD Graphics 2000, HD Graphics 3000, HD Graphics 2500,
HD Graphics 4000, HD Graphics P4000, HD Graphics 4600,
HD Graphics 5000, HD Graphics P4600/P4700, Iris(TM) Graphics 5100,
HD Graphics 4400, HD Graphics 4200, Iris(TM) Pro Graphics 5200
[ 23.568] (++) using VT number 7
[ 23.668] (EE) No devices detected.
[ 23.668] (EE)
Fatal server error:
[ 23.668] (EE) no screens found(EE)
[ 23.668] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 23.668] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 23.668] (EE)
As you can see it appears that it can't find any screen.
I would try to reinstall Xorg, but for some reason i can't get internet access from the terminal neither wired nor wireless even though the wicd daemon is running as a systemd service.
Last edited by avh (2013-08-13 13:31:12)swaraj wrote:
See if this article helps you: https://wiki.archlinux.org/index.php/NV … IA_Optimus
I had the same problem and it certainly solved all my issues.
The thing is, it worked fine for me just using the intel driver. Now I have removed both nvidia and noveau drivers again, but it still dosen't work. Also graphics is set to integrated in BIOS. -
Keyboard won't work after attempted 2.1 install
I have XPSP2 installed on its on HD. I used Boot Camp Beta. When I upgraded to Leopard I installed BC 2.0 and everything worked perfectly. When BC 2.1 was announced, I made sure all firmware and other upgrades were in order and then ran the upgrade as an exe from the desktop. I got error messages concerning the apple keyboard (standard Mac). Subsequent to installation the keyboard would not work at all and Device Manager stated the keyboard drivers were not installed. After several failed attempts, I uninstalled 2.1 and attempted to reinstall 2.0 from the Leopard disc. The keyboard still does not work and Device Manager shows drivers not installed. I tried installing 2.0 and 2.1 in Safe Mode and I can't. I tried to repair the existing XP using the the install disc and that causes an error message. I am at a loss as to what to do.
HelpI have a similar issue. I updated to 7.1.2 last night. Now my Bluetooth audio doesn't work.
The iPhone appears to be paired with my Bluetooth enabled car stereo, but will not play any music.
Initially the stereo said 'Bluetooth connection failed' but then I disconnected and re-paired; now both the stereo and iPhone say 'connected' but still no audio.
If I press play on the phone or stereo, there's no response.
I can confirm that my Bluetooth keyboard pairs fine and I can type, change the brightness and volume but I cannot pause or play music.
My guess is that there was a change to the iOS Bluetooth Audio functionality. One that's introduced an incompatibility with one or several of the Bluetooth audio profiles: iOS: Supported Bluetooth profiles
Vid -
FCP won't open after I tried to install trial software
I downloaded a trial copy of master perfection suite and another Bias product just to check it out. Now Final Cut Pro won't open - it brings up a box that gives me the option to authorize, continue etc, but when i do anything, the box just appears again. I have to Force Quit FCP since everything's grayed out. I've trashed prefs, repaired permissions, restarted but it hasn't helped.
Come on, you've been on the board long enough, You should know better. When you have a stable OS/Application combo, clone your startup drive. This way you can quickly restore your system to it's previous state.<<<</div>
Actually, I didn't know this. I'll have to look into how to do this.
I called Bias tech support - they were great. The suggestion to remove the files from the plugin folder was close - there was a 'components' folder in there as well that needed to go. Once that was removed, I restarted and FCP opened without a problem. -
PowerMac won't boot after power failure during install
Hi, sorry if this has been asked. I searched, but I'm not quite sure how to phrase it.
I bought a used PowerMac from craigslist and went to install a newer version of OSX. I had a power failure in the middle of the install and now the computer won't boot up. How do I go back to a fresh re-install and get the computer to boot up?
Much appreciated!Did you use a retail install DVD? If you used a gray disc from another model Mac, that could be a problem.
Because of the power failure, suggest you reset the PMU. How long was the power Off? You may need to replace the PRAM battery.
Resetting Cuda/PMU on Power Mac G5, Power Mac G4, Power Macintosh G3
http://docs.info.apple.com/article.html?artnum=86760
Cheers, Tom -
ITunes won't start after Windows 7 Repair install
Hi there
I recently had to repair my Windows 7 64 bit Home Premium edition installation. It warned me before reinstalling that there could be some problems with iTunes following the repair but I followed the instructions to counter this and repair Windows 7. i.e. I uninstalled all iTunes software as outlined on Apples pages.
On opening Windows 7 again I ended up with a Blue Screen of Death - this pointed me to a faulty iTunes installation - I checked control panel and sure enough it was not listed as uninstalled. I therefore followed online instructions to completely remove iTunes and used Revo Uninstaller Pro to catch anything I missed. All looked good, I rebooted my machine and then went to install iTunes again. I chose the 64bit installer from the site and installed as normal. I have now tried to open iTunes (to sync my iPhone) and it thinks about it for a second and then never opens. On opening task manager I can see iTunes.exe*32 (does this mean 32 bit and if so why when I've DEFINITELY got the 64 bit installation), iTunesHelper.exe*32 and AppleMobileDeviceHelper.exe*32 all in Processes - they are not in open programs.
Even stopping these processes does not help. iTunes was working fine before my Windows 7 problems on this machine and all other software seems ok too following my repair. Can someone please assist me in getting iTunes to work again with my computer as this is very frustrating. This is not the first time it has happened to me - on my old Vista machine (different machine totally) this happened once or twice intermittently but then seemed to resolve itself. I have defrag, disk doctor and run just about every utility I have installed to get my system working ok and the only problem seems to be iTunes. I'd therefore appreciate help in resolving this.
Many thanksDid you try and update through itunes or download the installer from the apple website?
I've read some where its better to just download the stand alone installer from apple and
do it that way. -
Safari 1.3.2 won't open after QuickTime 7.2 install
Safari 1.3.2 had been working reasonably well until I updated to Quicken 7.2. Now when I try to open it, the icon and/or the open window shrinks and expands (or bobbles, jumps up and down, etc.). It will not open. (I've begun to notice a few other applications doing the "Safari bounce" when I try to open them. No, I didn't note the apps' names.) I've read all the posts and replies re this problem, but the bulk of the posts seem to be for OS X 10.4. I've repaired and verified the permissions; checked the Crash Log for Safari–– no current logs listed; and checked the System Profile's Console Log for Applications. A sample follows; if it's helpful, I'll give you the whole thing.
Aug 2 10:01:51 J-L-Pasalichs-Computer kernel: AppleNMI mask NMI
Aug 3 14:50:19 J-L-Pasalichs-Computer kernel: System Sleep
Aug 3 14:50:24 J-L-Pasalichs-Computer kernel: System Wake
Aug 3 14:50:24 J-L-Pasalichs-Computer kernel: Wake event 0020
Aug 3 14:50:24 J-L-Pasalichs-Computer kernel: AppleNMI unmask NMI
Aug 3 14:50:24 J-L-Pasalichs-Computer kernel: FWOHCI handleSelfIDInt - nodeID not valid (reset bus and retry 1)
Aug 3 14:50:34 J-L-Pasalichs-Computer mDNSResponder[166]: mDNSResponder Waking at 127000878
Aug 3 15:03:02 J-L-Pasalichs-Computer kernel: 0 0 AppleUSBCDCECMData: probe - provider doesn't want us to match
Aug 3 15:03:03 J-L-Pasalichs-Computer kernel: 0 0 AppleUSBCDCWMCData: probe - provider doesn't want us to match
Aug 3 15:03:03 J-L-Pasalichs-Computer kernel: 0 0 AppleUSBCDCACMData: probe - provider doesn't want us to match
Aug 3 15:03:03 J-L-Pasalichs-Computer kernel: InternalUSBModem::setPowerState(1)
2007-08-03 15:20:54.128 Safari[1167] Unable to load nib file: MainMenu, exiting
2007-08-03 15:20:58.825 Safari[1168] Unable to load nib file: MainMenu, exiting
2007-08-03 15:21:02.049 Safari[1169] Unable to load nib file: MainMenu, exiting
2007-08-03 15:55:30.713 Safari[1176] Unable to load nib file: MainMenu, exiting
Help! Help!Hi back to you.
Per your instructions, I downloaded the 10.3.9 combined update. (Thanks.) When I tried the dmg package this warning appeared: "The following disk images failed to mount: MacOSXUpdateCo no mountable file systems". Then I tried using Disk Copy to open the package and got: A red stop sign and "MacOSXUpdateCombo10.3.9.dmg failed to mount due to error 95. (missing plugin)". At this point, I have absolutely no idea what to do. Please advise. Many, many thanks. -
Weblogic Administrator Server won't start after a fresh WCC install
Hi guys, i followed this [install documentation|http://docs.oracle.com/cd/E23943_01/doc.1111/e14538/qiecm.htm#sthref8] to install wls and WCC on a OEL6 (64bit), all went relatively smoothly. Then when I get ready to start weblogic admin server for the first time, it errors out on me.
system:
-Oracle Enterprise Linux6 (64bit)
-WebLogic Server 12.1.1
-Webcenter Content 11g
-Oracle DB 11g
basic steps I've took:
1) RCU installed UCM, URM, IPM, and IBR schemas into 11g DB
2) installed wls, created a basic domain (base_domain) with Admin Server as a place holder
3) installed WCC, create new domain (wcc_domain) with Admin Server
4) start wls Admin Server: $WCC_DOMAIN_HOME/bin/startWebLogic.sh
5) error.......
[high level error msg]
Feb 12, 2013 10:27:07 PM oracle.security.jps.internal.keystore.file.FileKeyStoreManager openKeyStore
WARNING: Opening of file based keystore failed.
<Feb 12, 2013 10:27:07 PM CST> <Error> <Security> <BEA-090892> <The loading of OPSS java security policy provider failed due to exception, see the exception stack trace or the server log file for root cause. If still see no obvious cause, enable the debug flag -Djava.security.debug=jpspolicy to get more information. Error message: JPS-06514: Opening of file based keystore failed.>
<Feb 12, 2013 10:27:07 PM CST> <Critical> <WebLogicServer> <BEA-000386> <Server subsystem failed. Reason: weblogic.security.SecurityInitializationException: The loading of OPSS java security policy provider failed due to exception, see the exception stack trace or the server log file for root cause. If still see no obvious cause, enable the debug flag -Djava.security.debug=jpspolicy to get more information. Error message: JPS-06514: Opening of file based keystore failed.
weblogic.security.SecurityInitializationException: The loading of OPSS java security policy provider failed due to exception, see the exception stack trace or the server log file for root cause. If still see no obvious cause, enable the debug flag -Djava.security.debug=jpspolicy to get more information. Error message: JPS-06514: Opening of file based keystore failed.
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadOPSSPolicy(CommonSecurityServiceManagerDelegateImpl.java:1402)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1022)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)
at weblogic.security.SecurityService.start(SecurityService.java:148)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
Truncated. see log file for complete stacktrace
Caused By: oracle.security.jps.JpsRuntimeException: JPS-06514: Opening of file based keystore failed.
at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:167)
at oracle.security.jps.internal.policystore.JavaPolicyProvider.<init>(JavaPolicyProvider.java:369)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
Truncated. see log file for complete stacktrace
Caused By: oracle.security.jps.JpsException: JPS-06514: Opening of file based keystore failed.
at oracle.security.jps.internal.policystore.PolicyUtil.getDefaultPDPService(PolicyUtil.java:2855)
at oracle.security.jps.internal.policystore.PolicyUtil.getPDPService(PolicyUtil.java:3099)
at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:164)
at oracle.security.jps.internal.policystore.JavaPolicyProvider.<init>(JavaPolicyProvider.java:369)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
Truncated. see log file for complete stacktrace
Caused By: oracle.security.jps.service.keystore.KeyStoreServiceException: JPS-06514: Opening of file based keystore failed.
at oracle.security.jps.internal.keystore.file.FileKeyStoreManager.openKeyStore(FileKeyStoreManager.java:374)
at oracle.security.jps.internal.keystore.file.FileKeyStoreServiceImpl.doInit(FileKeyStoreServiceImpl.java:105)
at oracle.security.jps.internal.keystore.file.FileKeyStoreServiceImpl.<init>(FileKeyStoreServiceImpl.java:77)
at oracle.security.jps.internal.keystore.file.FileKeyStoreServiceImpl.<init>(FileKeyStoreServiceImpl.java:67)
at oracle.security.jps.internal.keystore.KeyStoreProvider.getInstance(KeyStoreProvider.java:157)
Truncated. see log file for complete stacktrace
[high level error msg]
steps I've took to tackle this problem:
1) removed $WCC_DOMAIN/security folder, then re-enter username/password
<result> can't find SerializedSystemIni.dat file
2) create a boot.properties file in folder
<result> same keystore error as above
3) re-generate a new SerializedSystemIni.dat file [described here|http://www.wikiconsole.com/wiki/?p=3041]
<result> same keystore error as above
4) tried modify cwallet.sso [described here|https://forums.oracle.com/forums/thread.jspa?threadID=2266436]
<result> can't modify, content in sso file is encrtyped
5) review message with debug option enabled
<result> it said error from LDAP [described here|http://docs.oracle.com/cd/E17904_01/core.1111/e10043/aptrouble.htm] but I don't have LDAP enabled/installed
6) create a key store based on WCC install doc (IRM section)
<result> same keystore error as above
none of the steps above work, only option left I can think of, is maybe install it with wls 10.3 (seems like that's what the installation doc used). I honestly hope it could be as simple as that, but if I'm missing anything critical, please let me know.
Thank you
p.s: please feel free to ask me to post the long lengthy debug outputHi ,
First and foremost I am not sure why you have used WLS 12c to be installed for WCC environment . That is currently a non-supported configuration .
Secondly you are starting the admin server from <domain_home>/bin ? If yes , then go up the directory and start it from <domain_home> itself .
Check if that works .
Thanks,
Srinath -
Encore was launching and working fine but,as many others before me, I had no content in the Library panel and downloaded the content files from the link Adobe provides. When I relaunched Encore it froze at the bottom of my screen. I have restarted the application, the computer, and even deleted the preferences file but Encore still freezes. I am using a Mac, OSX ver. 10.6.8., 6 gigs of ram. Any help would be appreciated.
Are you sure you meant to write CS5?
My understanding is that CS5 had a "self contained" installer that installed everything, and it was CS6 that required extra downloads from Adobe -
Mac won't boot after 10.4.6 install
I've just finally purchased Tiger. I did the install and now when it restarts it gets stuck at the apple and the twirling circle. I checked both the disk and permissions using the install disk utility. Everything was fine. So I reinstalled Tiger and ended up with a red circle with a line through it. So I reinstalled again and got as far as the apple and circle again. Can anyone tell me what is going on? I've used Macs since the Plus. Help! Thanks
Craig
PS - I'm trying to go from 10.3.9 to 10.4.6BTW my os9 disk boots and runs wonderfully. That said I have 25% free space and the memory is Kingston. I have a G4 400mhz with 384 meg ram that runs fine under osx 10.4.9. Perhaps the osx drive is about to die or I just need to erase it and start over. When booted verbose it gets to Launchd and stops with errno 2. The installer disk is a non specific family pak. Should work fine with this machine. I'm checking the hard drive today even though TTPro says it is ok. I'll post back.
Craig -
ITunes won't sync after Lion 10.7 install
I've looked around and it appears that this issue has been coming up in a few different iterations, I've tried some of the Apple Help hardwiring and nothing is working yet.
It's this simple. My iPhone and iPods synced up fine with Snow Leopard las week but do not open iTunes or appear when iTunes 10.4 are opened.
I've tried reinstalling iTunes and the old procedures under http://support.apple.com/kb/TS3540
Nothing working yet.Peter,
Let me be clear. When you say "I just deleted that one file…" it's a bit grey as to what you're referring to. When I try your first two steps…
Disconnect the device and quit iTunes.
In the Finder, locate iTunes in the Applications folder and drag it to the Trash. (This will not remove any of your iTunes media or your iTunes library.)
… I cannot drag iTunes to the trash without getting "iTunes can’t be modified or deleted because it’s required by Mac OS X"
Now, I cant find any reference to "AppleUSBCDC"
But I did get:
IOSurface: buffer allocation size is zero
IOSurface: buffer allocation size is zero
Kext com.apple.driver.AppleMobileDevice not found for unload request.
Kext com.apple.driver.AppleUSBEthernetHost not found for unload request.
Resetting IOCatalogue.
and:
en1: Supported channels 1 2 3 4 5 6 7 8 9 10 11 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140 149 153 157 161 165
USBF: 44638. 70 [0xffffff80130b5000] The IOUSBFamily is having trouble enumerating a USB device that has been plugged in. It will keep retrying. (Port 4 of Hub at 0x6000000)
USBF: 44641. 88 [0xffffff80130b5000] The IOUSBFamily was not able to enumerate a device.
2.3.11 m168efe17
Both of those seem fairly ominous… -
H9-1130 Won't boot after new graphics card install.
Alright, here we go.
I recently bought an EVGA 750 superclocked for my PC. The first time I installed it, I got a black screen. Popped in the old GPU and checked the BIOS. Ended up updating it.
Now, here's the interesting part: I install the EVGA back into my computer, and it ends up getting stuck at the HP boot logo. I went to another thread on this site regarding pretty much the same question, and the people there recommended checking the PSU and the graphics card. Well, I brought my GPU to a friend to plug into his computer, and it booted up just fine. I did check my PSU aswell, and all seems to be fine there. So, yeah, any suggestions on how I can get this card to work on my mobo?
SPECS:
AMD FX-8120
(old) GPU: AMD 7670
(new) GPU: EVGA 750 1gb Superclocked
PSU: HP 650w
mobo: Gigabyte 2AC8Hi,
I have no suggestions on how to get the EVGA GTX 750 to work in a HP PC that has a legacy version 7 bios (non-UEFI).
I do have one suggestion: Contact EVGA and ask for a remendy other than replacing the motherboard or buying a new PC. Don't expect HP to provide a version 8 UEFI BIOS update for your PC. HP didn't start producing UEFI BIOS consumer desktop PCs until the middle of October 2012.
You might try Sapphire as they offer both NVIDIA and AMD graphics that are designated UEFI and those that are not designated UEFI. You need a card that is non-UEFI designated.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT -
Printer won't work after installing mountain lion?
printer won't work after installing mountain lion?
Assuming you've first checked Software Update to see if there are any updated drivers and it's still not working, you could try resetting the printing system.
System Preferences>Print & Scan, Control+Click or Right Click on a printer on the left and select 'reset printing system'. All printers will be deleted and need to be added again. -
8500A Plus Won't print after idle 20 mins
Windows 7, 64 bit, no service pack yet. Tried updating firmware, but by computer grays out the printer option. This is my THIRD printer from HP (exact same model) that has had the exact same issue. Must be a software issue, but can't find it. Printer won't print after idle for 20 mins. Goes into printer que, but doesn't complete. Issue started Jan 2, no big changes to computer at time. Has anyone had this issue that can help? I'm about ready to go buy a Brother. Thanks
The first thing I would do is follow step six in this document to set a static IP: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02790693&cc=ad&dlc=en&lc=en&jumpid=reg_r1002_us...
When it askes for DNS information, enter in Google's DNS. Preferred DNS = 8.8.8.8 Alt DNS = 8.8.4.4
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
Maybe you are looking for
-
Adding Fields to New Hire SAP Script, Text ID PAMA
Hi there, I have successfully created a sapscript email to be sent via Dynamic Actions for the notification of New Hires and Terminations. This has been accomplished via feature M0001 (we have created two new features u2013 M00NH & M00TM), dynamic a
-
Dvacore.dll error between CP5.5 and PS5.1 using colour picker
Hi all. If I have CP 5.5 (or 5) open at the same time as PS5.1 (not sure about other versions) and I use the colour picker (eye dropper) in CP, all is fine until I move the mouse icon onto the live PS window when I get the following error. Has anyone
-
i cannot update my software on my ipod
-
No sound after installing windows 7 on HP Pavilion dv1710us Notebook PC
I recently helped my uncle install windows 7 on his HP Pavilion dv1710us Notebook PC and there was no sound after installation.. i downloaded several drivers for the realtek high definition audio driver (R2.39, 38, 37, etc) then i tried the original
-
Hi We have a below requirement We are using IW56 for creating service notification. In the service notification,header tab,we use service order function,create to do autamatic service order creation iw31 . We would require to use this function in act