Hp desktop a1742n will not startup it says no signal and i get a black screen
Hi everyone this is my first time posting here and I seriously need your help. I have an Hp desktop a1742n and everytime i turn it on I get a message that says no signal and i get a black screen. I know its not the monitor or the cord because i connected them to my laptop with no issue. i have checked the mouse and keyboard as well. I would hate to pay for a new computer when if this one can be repaired with a few steps from home. Also the fans are running the lights on the CD drive opens and closes and seem to respond when a disk is placed in there. and i don't hear any beeps can anyone help.
Hi,
If you are having startup problems, try following the steps in this guide: http://www.selectrealsecurity.com/fix-windows-startup/
It provides instructions on how to fix Windows startup problems. If you have any questions, just ask. I hope this helps you.
Brian
"An ounce of prevention is worth a pound of cure"
Similar Messages
-
My computer will not start up. It powers up, I get the gray screen with the apple, then the loading progress bar starts loading to about 25% the the screen goes black. what can I try to get my computer up and running?
Carolyn Samit wrote:
iMac, Mac OS X (10.7.1)
Use Command + R for Lion Recovery
Try restarting, when you hear the startup tone hold down the Option key. Then choose the Recovery Partition. -
can't get mail on dock to open when trying log off says quit mail and try again tried dozens of times quit mail try again but does not work
Pierre222,
Unfortunately you are not providing us with any useful information. We need to know what app you are using to email at the very least. However what I'd suggest you do is call AppleCare, you have 90 days of free telephone support (the number is in your owners manual) and they will be happy to assist you. They're open M-Saturday so you will need to wait until tomorrow.
BTW if you have not been exposed to these please bookmark them and begin using them. You may find your answer in one of the videos.
Switch 101, Mac 101, Find Out How Video tutorials & List of Useful URLs for switchers -
Videos created in iMovie on the new ipad will not play on PC with Quicktime after being exported to the Camera Roll and copied to the PC. Movie will play but with a black screen only. Audio ok. Was able to do before ios 6 but not now.
I'm having the same problem. All of the movies I export out of iMovie since upgrading to the latest version show up with no video, only audio, in Quicktime. Ironically the video place just fine in Windows Media Player and also in iTunes.
-
Do i need to change my windows file association? What is the extension?
Have you selected the content to sync to your iPad in your sync settings in iTunes. The content that you want to transfer must be selected (checked or "ticked") to sync out will not transfer when you sync.
For instance - if you want to sync music....
Connect the iPad to the computer and launch iTunes.
Click on the iPad name on the left side under devices.
Click on the Music Tab on the right.
Click on the albums or playlists that you want to sync - or the entire library if you like.
Click on the Sync Music Heading.
Click on Apply in the lower right corner of iTunes
This applies to all content that you want to transfer from iTunes to your iPad. Make the selections in the appropriate tabs in the iTunes window on the right. -
My i phone is stuck and will not let me turn on or off or get to regular screen
My phone is stuck. It will not let me turn on or off will not go back to regular screen
Apparently you already fixed it in under a minute. Congrats.
-
Could not Set Xmonad to Work Starts and Stops With a Black Screen
Folks I've installed xmonad here. So I edited 2 files:
cat .xinitrc
#exec startkde
#exec ck-launch-session gnome-session
# set the cursor
xsetroot -cursor_name left_ptr
# set German keyboard layout
setxkbmap -layout br
exec ck-launch-session xmonad
exec xmonad
and
cat .xmonad/xmonad.hs
import XMonad
main = do
xmonad $ defaultConfig
{ terminal = myTerminal
, modMask = myModMask
, borderWidth = myBorderWidth
-- yes, these are functions; just very simple ones
-- -- that accept no input and return static values
myTerminal = "urxvt"
myModMask = mod4Mask -- Win key or Super_L
myBorderWidth = 3
Thou when I start xmonad all I get is a black screen. What am I missing?karol wrote:Can you post /var/log/Xorg.0.log?
[ 6504.874]
X.Org X Server 1.10.3
Release Date: 2011-07-08
[ 6504.875] X Protocol Version 11, Revision 0
[ 6504.875] Build Operating System: Linux 2.6.39-ARCH x86_64
[ 6504.875] Current Operating System: Linux mordor 2.6.39-ARCH #1 SMP PREEMPT Sat Jul 9 14:57:41 CEST 2011 x86_64
[ 6504.875] Kernel command line: root=/dev/disk/by-uuid/8084cf06-452a-4e04-a89a-0f017461b727 ro
[ 6504.875] Build Date: 09 July 2011 07:52:32AM
[ 6504.875]
[ 6504.875] Current version of pixman: 0.22.2
[ 6504.876] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 6504.876] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 6504.877] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Jul 21 02:12:32 2011
[ 6504.877] (==) Using config file: "/etc/X11/xorg.conf"
[ 6504.877] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 6504.877] (==) ServerLayout "Layout0"
[ 6504.877] (**) |-->Screen "Screen0" (0)
[ 6504.877] (**) | |-->Monitor "Monitor0"
[ 6504.878] (**) | |-->Device "Device0"
[ 6504.878] (**) |-->Input Device "Keyboard0"
[ 6504.878] (**) |-->Input Device "Mouse0"
[ 6504.878] (==) Automatically adding devices
[ 6504.878] (==) Automatically enabling devices
[ 6504.878] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 6504.878] Entry deleted from font path.
[ 6504.878] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 6504.878] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 6504.878] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 6504.878] (WW) Disabling Keyboard0
[ 6504.878] (WW) Disabling Mouse0
[ 6504.878] (II) Loader magic: 0x7d3440
[ 6504.878] (II) Module ABI versions:
[ 6504.878] X.Org ANSI C Emulation: 0.4
[ 6504.878] X.Org Video Driver: 10.0
[ 6504.878] X.Org XInput driver : 12.2
[ 6504.878] X.Org Server Extension : 5.0
[ 6504.878] (--) PCI:*(0:1:0:0) 10de:1200:1462:2382 rev 161, Mem @ 0xfc000000/33554432, 0xd8000000/134217728, 0xd4000000/67108864, I/O @ 0x0000dc00/128, BIOS @ 0x????????/524288
[ 6504.878] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 6504.878] (II) LoadModule: "extmod"
[ 6504.879] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 6504.879] (II) Module extmod: vendor="X.Org Foundation"
[ 6504.879] compiled for 1.10.3, module version = 1.0.0
[ 6504.879] Module class: X.Org Server Extension
[ 6504.879] ABI class: X.Org Server Extension, version 5.0
[ 6504.879] (II) Loading extension MIT-SCREEN-SAVER
[ 6504.879] (II) Loading extension XFree86-VidModeExtension
[ 6504.879] (II) Loading extension XFree86-DGA
[ 6504.879] (II) Loading extension DPMS
[ 6504.879] (II) Loading extension XVideo
[ 6504.879] (II) Loading extension XVideo-MotionCompensation
[ 6504.879] (II) Loading extension X-Resource
[ 6504.879] (II) LoadModule: "dbe"
[ 6504.879] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 6504.879] (II) Module dbe: vendor="X.Org Foundation"
[ 6504.879] compiled for 1.10.3, module version = 1.0.0
[ 6504.879] Module class: X.Org Server Extension
[ 6504.879] ABI class: X.Org Server Extension, version 5.0
[ 6504.879] (II) Loading extension DOUBLE-BUFFER
[ 6504.879] (II) LoadModule: "glx"
[ 6504.879] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 6504.887] (II) Module glx: vendor="NVIDIA Corporation"
[ 6504.887] compiled for 4.0.2, module version = 1.0.0
[ 6504.887] Module class: X.Org Server Extension
[ 6504.887] (II) NVIDIA GLX Module 275.19 Tue Jul 12 18:31:51 PDT 2011
[ 6504.887] (II) Loading extension GLX
[ 6504.887] (II) LoadModule: "record"
[ 6504.887] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 6504.887] (II) Module record: vendor="X.Org Foundation"
[ 6504.887] compiled for 1.10.3, module version = 1.13.0
[ 6504.887] Module class: X.Org Server Extension
[ 6504.887] ABI class: X.Org Server Extension, version 5.0
[ 6504.887] (II) Loading extension RECORD
[ 6504.887] (II) LoadModule: "dri"
[ 6504.887] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 6504.887] (II) Module dri: vendor="X.Org Foundation"
[ 6504.887] compiled for 1.10.3, module version = 1.0.0
[ 6504.887] ABI class: X.Org Server Extension, version 5.0
[ 6504.887] (II) Loading extension XFree86-DRI
[ 6504.887] (II) LoadModule: "dri2"
[ 6504.887] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 6504.887] (II) Module dri2: vendor="X.Org Foundation"
[ 6504.887] compiled for 1.10.3, module version = 1.2.0
[ 6504.887] ABI class: X.Org Server Extension, version 5.0
[ 6504.887] (II) Loading extension DRI2
[ 6504.887] (II) LoadModule: "nvidia"
[ 6504.888] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 6504.888] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 6504.888] compiled for 4.0.2, module version = 1.0.0
[ 6504.888] Module class: X.Org Video Driver
[ 6504.888] (II) NVIDIA dlloader X Driver 275.19 Tue Jul 12 18:15:26 PDT 2011
[ 6504.888] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 6504.888] (--) using VT number 7
[ 6504.894] (II) Loading sub module "fb"
[ 6504.894] (II) LoadModule: "fb"
[ 6504.894] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 6504.894] (II) Module fb: vendor="X.Org Foundation"
[ 6504.894] compiled for 1.10.3, module version = 1.0.0
[ 6504.894] ABI class: X.Org ANSI C Emulation, version 0.4
[ 6504.894] (II) Loading sub module "wfb"
[ 6504.894] (II) LoadModule: "wfb"
[ 6504.894] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 6504.894] (II) Module wfb: vendor="X.Org Foundation"
[ 6504.894] compiled for 1.10.3, module version = 1.0.0
[ 6504.894] ABI class: X.Org ANSI C Emulation, version 0.4
[ 6504.894] (II) Loading sub module "ramdac"
[ 6504.894] (II) LoadModule: "ramdac"
[ 6504.894] (II) Module "ramdac" already built-in
[ 6504.894] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 6504.894] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 6504.894] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 6504.894] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 6504.894] (==) NVIDIA(0): RGB weight 888
[ 6504.894] (==) NVIDIA(0): Default visual is TrueColor
[ 6504.894] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 6505.241] (II) NVIDIA(GPU-0): Display (LG Electronics L196WTQ (CRT-0)) does not support
[ 6505.241] (II) NVIDIA(GPU-0): NVIDIA 3D Vision stereo.
[ 6505.242] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 560 Ti (GF114) at PCI:1:0:0 (GPU-0)
[ 6505.242] (--) NVIDIA(0): Memory: 1048576 kBytes
[ 6505.242] (--) NVIDIA(0): VideoBIOS: 70.24.11.00.00
[ 6505.242] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 6505.242] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[ 6505.242] (--) NVIDIA(0): Connected display device(s) on GeForce GTX 560 Ti at
[ 6505.242] (--) NVIDIA(0): PCI:1:0:0
[ 6505.242] (--) NVIDIA(0): LG Electronics L196WTQ (CRT-0)
[ 6505.242] (--) NVIDIA(0): LG Electronics L196WTQ (CRT-0): 400.0 MHz maximum pixel clock
[ 6505.281] (II) NVIDIA(0): Assigned Display Device: CRT-0
[ 6505.281] (==) NVIDIA(0):
[ 6505.281] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 6505.281] (==) NVIDIA(0): will be used as the requested mode.
[ 6505.281] (==) NVIDIA(0):
[ 6505.281] (II) NVIDIA(0): Validated modes:
[ 6505.281] (II) NVIDIA(0): "nvidia-auto-select"
[ 6505.281] (II) NVIDIA(0): Virtual screen size determined to be 1440 x 900
[ 6505.307] (--) NVIDIA(0): DPI set to (89, 87); computed from "UseEdidDpi" X config
[ 6505.307] (--) NVIDIA(0): option
[ 6505.307] (--) Depth 24 pixmap format is 32 bpp
[ 6505.307] (II) NVIDIA: Using 3072.00 MB of virtual memory for indirect memory
[ 6505.307] (II) NVIDIA: access.
[ 6505.311] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 6505.311] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 6505.311] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 6505.311] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 6505.311] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 6505.311] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 6505.311] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 6505.311] (II) NVIDIA(0): Config Options in the README.
[ 6505.313] (II) NVIDIA(0): Setting mode "nvidia-auto-select"
[ 6505.360] (II) Loading extension NV-GLX
[ 6505.411] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 6505.411] (==) NVIDIA(0): Backing store disabled
[ 6505.411] (==) NVIDIA(0): Silken mouse enabled
[ 6505.412] (**) NVIDIA(0): DPMS enabled
[ 6505.412] (II) Loading extension NV-CONTROL
[ 6505.412] (II) Loading extension XINERAMA
[ 6505.412] (II) Loading sub module "dri2"
[ 6505.412] (II) LoadModule: "dri2"
[ 6505.412] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 6505.413] (II) Module dri2: vendor="X.Org Foundation"
[ 6505.413] compiled for 1.10.3, module version = 1.2.0
[ 6505.413] ABI class: X.Org Server Extension, version 5.0
[ 6505.413] (II) NVIDIA(0): [DRI2] Setup complete
[ 6505.413] (==) RandR enabled
[ 6505.413] (II) Initializing built-in extension Generic Event Extension
[ 6505.413] (II) Initializing built-in extension SHAPE
[ 6505.413] (II) Initializing built-in extension MIT-SHM
[ 6505.413] (II) Initializing built-in extension XInputExtension
[ 6505.413] (II) Initializing built-in extension XTEST
[ 6505.413] (II) Initializing built-in extension BIG-REQUESTS
[ 6505.413] (II) Initializing built-in extension SYNC
[ 6505.413] (II) Initializing built-in extension XKEYBOARD
[ 6505.413] (II) Initializing built-in extension XC-MISC
[ 6505.413] (II) Initializing built-in extension SECURITY
[ 6505.413] (II) Initializing built-in extension XINERAMA
[ 6505.413] (II) Initializing built-in extension XFIXES
[ 6505.413] (II) Initializing built-in extension RENDER
[ 6505.413] (II) Initializing built-in extension RANDR
[ 6505.413] (II) Initializing built-in extension COMPOSITE
[ 6505.413] (II) Initializing built-in extension DAMAGE
[ 6505.414] (II) Initializing extension GLX
[ 6505.507] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 6505.507] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 6505.507] (II) LoadModule: "evdev"
[ 6505.507] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 6505.507] (II) Module evdev: vendor="X.Org Foundation"
[ 6505.507] compiled for 1.10.0, module version = 2.6.0
[ 6505.507] Module class: X.Org XInput Driver
[ 6505.507] ABI class: X.Org XInput driver, version 12.2
[ 6505.507] (II) Using input driver 'evdev' for 'Power Button'
[ 6505.507] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 6505.507] (**) Power Button: always reports core events
[ 6505.507] (**) Power Button: Device: "/dev/input/event1"
[ 6505.522] (--) Power Button: Found keys
[ 6505.522] (II) Power Button: Configuring as keyboard
[ 6505.522] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[ 6505.522] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 6505.522] (**) Option "xkb_rules" "evdev"
[ 6505.522] (**) Option "xkb_model" "evdev"
[ 6505.522] (**) Option "xkb_layout" "br"
[ 6505.522] (**) Option "xkb_variant" "abnt2"
[ 6505.543] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 6505.543] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 6505.543] (II) Using input driver 'evdev' for 'Power Button'
[ 6505.543] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 6505.543] (**) Power Button: always reports core events
[ 6505.543] (**) Power Button: Device: "/dev/input/event0"
[ 6505.579] (--) Power Button: Found keys
[ 6505.579] (II) Power Button: Configuring as keyboard
[ 6505.579] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0"
[ 6505.579] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 6505.579] (**) Option "xkb_rules" "evdev"
[ 6505.579] (**) Option "xkb_model" "evdev"
[ 6505.579] (**) Option "xkb_layout" "br"
[ 6505.579] (**) Option "xkb_variant" "abnt2"
[ 6505.582] (II) config/udev: Adding input device Genius Optical Mouse (/dev/input/event3)
[ 6505.582] (**) Genius Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 6505.582] (II) Using input driver 'evdev' for 'Genius Optical Mouse'
[ 6505.582] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 6505.582] (**) Genius Optical Mouse: always reports core events
[ 6505.582] (**) Genius Optical Mouse: Device: "/dev/input/event3"
[ 6505.606] (--) Genius Optical Mouse: Found 3 mouse buttons
[ 6505.606] (--) Genius Optical Mouse: Found scroll wheel(s)
[ 6505.606] (--) Genius Optical Mouse: Found relative axes
[ 6505.606] (--) Genius Optical Mouse: Found x and y relative axes
[ 6505.606] (II) Genius Optical Mouse: Configuring as mouse
[ 6505.606] (II) Genius Optical Mouse: Adding scrollwheel support
[ 6505.606] (**) Genius Optical Mouse: YAxisMapping: buttons 4 and 5
[ 6505.606] (**) Genius Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 6505.606] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.0/input/input8/event3"
[ 6505.606] (II) XINPUT: Adding extended input device "Genius Optical Mouse" (type: MOUSE)
[ 6505.606] (II) Genius Optical Mouse: initialized for relative axes.
[ 6505.606] (**) Genius Optical Mouse: (accel) keeping acceleration scheme 1
[ 6505.606] (**) Genius Optical Mouse: (accel) acceleration profile 0
[ 6505.606] (**) Genius Optical Mouse: (accel) acceleration factor: 2.000
[ 6505.606] (**) Genius Optical Mouse: (accel) acceleration threshold: 4
[ 6505.606] (II) config/udev: Adding input device Genius Optical Mouse (/dev/input/mouse0)
[ 6505.606] (II) No input driver/identifier specified (ignoring)
[ 6505.606] (II) config/udev: Adding input device USB-compliant keyboard (/dev/input/event4)
[ 6505.606] (**) USB-compliant keyboard: Applying InputClass "evdev keyboard catchall"
[ 6505.606] (II) Using input driver 'evdev' for 'USB-compliant keyboard'
[ 6505.606] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 6505.606] (**) USB-compliant keyboard: always reports core events
[ 6505.606] (**) USB-compliant keyboard: Device: "/dev/input/event4"
[ 6505.646] (--) USB-compliant keyboard: Found keys
[ 6505.646] (II) USB-compliant keyboard: Configuring as keyboard
[ 6505.646] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.1/usb4/4-2/4-2:1.0/input/input4/event4"
[ 6505.646] (II) XINPUT: Adding extended input device "USB-compliant keyboard" (type: KEYBOARD)
[ 6505.646] (**) Option "xkb_rules" "evdev"
[ 6505.646] (**) Option "xkb_model" "evdev"
[ 6505.646] (**) Option "xkb_layout" "br"
[ 6505.646] (**) Option "xkb_variant" "abnt2"
[ 6505.646] (II) config/udev: Adding input device USB-compliant keyboard (/dev/input/event5)
[ 6505.646] (**) USB-compliant keyboard: Applying InputClass "evdev keyboard catchall"
[ 6505.646] (II) Using input driver 'evdev' for 'USB-compliant keyboard'
[ 6505.646] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 6505.646] (**) USB-compliant keyboard: always reports core events
[ 6505.646] (**) USB-compliant keyboard: Device: "/dev/input/event5"
[ 6505.662] (--) USB-compliant keyboard: Found 1 mouse buttons
[ 6505.662] (--) USB-compliant keyboard: Found scroll wheel(s)
[ 6505.662] (--) USB-compliant keyboard: Found relative axes
[ 6505.662] (--) USB-compliant keyboard: Found x and y relative axes
[ 6505.662] (--) USB-compliant keyboard: Found absolute axes
[ 6505.662] (--) USB-compliant keyboard: Found keys
[ 6505.662] (II) USB-compliant keyboard: Configuring as mouse
[ 6505.662] (II) USB-compliant keyboard: Configuring as keyboard
[ 6505.662] (II) USB-compliant keyboard: Adding scrollwheel support
[ 6505.662] (**) USB-compliant keyboard: YAxisMapping: buttons 4 and 5
[ 6505.662] (**) USB-compliant keyboard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 6505.662] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.1/usb4/4-2/4-2:1.1/input/input5/event5"
[ 6505.662] (II) XINPUT: Adding extended input device "USB-compliant keyboard" (type: KEYBOARD)
[ 6505.662] (**) Option "xkb_rules" "evdev"
[ 6505.662] (**) Option "xkb_model" "evdev"
[ 6505.662] (**) Option "xkb_layout" "br"
[ 6505.662] (**) Option "xkb_variant" "abnt2"
[ 6505.662] (II) USB-compliant keyboard: initialized for relative axes.
[ 6505.662] (WW) USB-compliant keyboard: ignoring absolute axes.
[ 6505.663] (**) USB-compliant keyboard: (accel) keeping acceleration scheme 1
[ 6505.663] (**) USB-compliant keyboard: (accel) acceleration profile 0
[ 6505.663] (**) USB-compliant keyboard: (accel) acceleration factor: 2.000
[ 6505.663] (**) USB-compliant keyboard: (accel) acceleration threshold: 4
[ 6505.663] (II) config/udev: Adding input device USB-compliant keyboard (/dev/input/mouse1)
[ 6505.663] (II) No input driver/identifier specified (ignoring)
[ 6505.665] (II) config/udev: Adding input device PC Speaker (/dev/input/event2)
[ 6505.665] (II) No input driver/identifier specified (ignoring)
[ 6525.656] (II) USB-compliant keyboard: Close
[ 6525.656] (II) UnloadModule: "evdev"
[ 6525.656] (II) Unloading evdev
[ 6525.656] (II) USB-compliant keyboard: Close
[ 6525.656] (II) UnloadModule: "evdev"
[ 6525.656] (II) Unloading evdev
[ 6525.656] (II) Genius Optical Mouse: Close
[ 6525.656] (II) UnloadModule: "evdev"
[ 6525.656] (II) Unloading evdev
[ 6525.656] (II) Power Button: Close
[ 6525.656] (II) UnloadModule: "evdev"
[ 6525.656] (II) Unloading evdev
[ 6525.656] (II) Power Button: Close
[ 6525.656] (II) UnloadModule: "evdev"
[ 6525.656] (II) Unloading evdev -
Hi. Bought iwork family as a download rather than on DVD. Want to transfer to other macs in household. Apple told me to transfer to USB stick and then put on other macs. Doesn't work and get message saying "keynote cannot be opened due to a problem". Same problem for .pages and .numbers. I have reinstallled but same problem. Have checked system requirements and everything seems fine.Any one have any ideas how to solve this. Thanks
I'm an applications developer and also run a part-time videography business. As such, I require more than 3.12GB of RAM. That is the physical limitation of a 32bit system. Pointless to stay on 32bit if you plan on having more than that much RAM.
I'm also not about to pay someone to fix my PC when I can do it myself. I was originally hoping for someone who had experienced the problem before to point me in the right direction so I didn't have to spend so much time trying to figure out what the issue was for myself.
Basically, in the end the problem was caused because right at the point in time when I chose to uninstall, and reinstall; Apple released a new version of iTunes. This version in turn had a requirement of iOS 4.2 to sync with the iPhone. This is a pretty embarrassing for Apple that they would release software reliant on other software before said software was released.
Had I realised I was downloading a newer version at the initial point of installation, this wouldn't have been an issue. I could've easily have rolled back iTunes to the previous version and gotten on with my life.
Another issue is that iTunes is not actually a 64 bit application. It masquerades as one to allow installation on the 64 bit platform. -
OS: Windows XP
Numerous crashes out of Firefox in recent uses, before this latest catastrophic crash.
Installation is also stalled.
I cannot open any Firefox window and have it find the internet now, so am stuck using Internet Explorer to log in here.
Past crashes have been about once every 18 hours, not including some crashes of Flash roughly every 3-5 days.
Should add that I couldn't kill any Firefox process using the Windows Task Manager, which is a first. And, (re-)install hung for more than an hour now, not proceeding.
Norton scan showing no viruses, and it has the latest definitions. This seems confined to a problem in Firefox.
Trying again to install and get this running, trying to open Firefox again fails, using what I presume was the latest previous install. I can't re-install still.
I did briefly see a program called SysFader trying to run when I was opening the Firefox window (unsuccessfully), but just did a search in my hard drive for a file or folder named SysFader and there are no matches. I don't know if they are related.
Nearly a day later and no apparent progress.(Moved content to main question area.)
-
My ipod 4 apps will not open i try to update and i get cannot connect to itunes store
My ipod 4 apps wil not open. They blink on then off real fast. I try to update but get the message "cannot connect to itunes store"> New apps work. I recently upgraded to windows 7, but our other ipod works fine. I recently deleted some songs and apps and since then have had this problem. i've tried all the suggestions I can find on appe support, nothing works
If your country's iTunes Store allows you to redownload purchased tracks, I'd delete your current copy of the track and try redownloading a fresh one. See the following document for instructions:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Otherwise, I'd report the problem to the iTunes Store.
Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
Find the item that is not playing properly. If you can't see "Report a Problem" next to the item, click the "Report a problem" button. Now click the "Report a Problem" link next to the item. -
I have to actually force quit these applications for this to work. How do I fix this. I also upgraded to Firefox 3.6.13.
Hi there,
You're running an old version of Safari. Before troubleshooting, try updating it to the latest version: 6.0. You can do this by clicking the Apple logo in the top left, then clicking Software update.
You can also update to the latest version of OS X, 10.8 Mountain Lion, from the Mac App Store for $19.99, which will automatically install Safari 6 as well, but this isn't essential, only reccomended.
Thanks, let me know if the update helps,
Nathan -
i downloaded itunes but for some reason the desktop icon will not showup?
Downloaded or downloaded and installed?
-
I am trying to install a flash player update, it will not fully load, saying close safari and try again,
how do I close safari completely, looks like something may be running in the background, but cant seem to find it, any help please.Control + Click or Right Click on the Safari icon on the dock, and then click on Quit.
-
I am reinstalling W7 on my iMac and keep getting the black screen. I had installed W7 before when using Snow Leapord but W7 doesn't want to install with the latest drivers (v4.0). W7 was working with Lion but I had to uninstall W7 and now I cannot reinstall.
NOTE: Just discovered that Adobe is making a bigger mess than any previously.
They now have a 32-bit uninstaller for Flash '''''AND''''' a separate 64-bit uninstaller for Flash. You will need the 64-bit uninstaller for what you had installed above.
*32-bit uninstaller: http://download.macromedia.com/pub/flashplayer/current/uninstall_flash_player_32bit.exe
*64-bit uninstaller: download.macromedia.com/pub/flashplayer/current/uninstall_flash_player_64bit.exe -
Start firefox and get to homepage . When proceeding to another link or page firefox stops responding and I get a black screen with a colored border stating at the top of the page that mozilla is not reponding. Try to go back to home page and mozilla shuts down. Any help would be appreciated. Prefer to use firefox over internet explorer in which case the problem is not duplicated. IE9 works fine. Long time firefox user and hope to continue to be. Thanks
TedI created an account just to say that firefox is not what it used to be and I'm very disappointed in it and it's developers. I've been with firefox since the day of it's launch. Every new version after firefox 2 has been a let down--- what's the point when I get the same type of ridiculous crashes and freezes? What really annoys me is when I click "new" to create a new message to send within hotmail and it freezes for about 30 seconds to a minute. This happens every time without fail! I've updated a newer version 3 times and still the same thing. I've noticed that there have been more new releases, but I'm now convinced that it's only for show--- trying to stack up to Opera. Firefox copies off of Opera a lot, but it's too bad the developers can't copy it's stability. Who wants to have to read through forums looking for a fix... who has time for that? I don't want to, but I'm really considering leaving firefox for good. Please, get it together and FIX firefox.
Maybe you are looking for
-
Getting DOM Parsing Exception in translator while Dequeuing the message from JMS topic
Hi All, Hope you all doing good. I have an issue. I am running on 11.1.1.5 SOA suite version on Linux. In my aplication I have 4 projects which are connected by with topic/queue. But in one of the communication, the JMS topic throws me the below erro
-
Appraisal task not displayed in inbox of portal
Hi, I have checked that PDD forms have been prepared using phap_admin_pa and they have. I know of no reason why the two tasks are not showing in the Inbox -or- the four forms are not in the status overview in My Appraisal. above comment is from user,
-
Hi Experts, The package IHREP is not available in our server. How to include that package? Regards K Arasu
-
AS3 in timeline - variable changes value on its own
I've just started working with Flash CS4 and Actionscript 3 after being away from Flash for almost 10 years. I've set up a menu that allows users to select from five sections. When users select an option, flow goes to the corresponding section of the
-
I have a thinkpad with a ATI Technologies Inc M22 [Radeon Mobility M300] graphicscard. The card works fine, but when I try to play video in mplayer with the xv-driver I get this error: It seems there is no Xvideo support for your video card available