HP Desktop All in one F4235 Error, wont print

Printer Problems HP Desktop All in one F4235
I keep getting E & Blinking.
Cant get Printer to work
Can someone give me a step by step guide in easy to follow instructions,
To fix this problem.
Thankyou for your help.
<edited to clarify title>
Message Edited by WendyM on 08-23-2009 09:36 AM

Hello,
Please see my response in your other thread:
http://h30434.www3.hp.com/t5/Printer-All-in-One-Install-Setup/hp-deskjet-2540-in-windows-8-not-print...
Thanks,
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Similar Messages

HP Officejet 4500 Desktop All-in-One Printer - G510a and Windows 8.1

The drivers for this do not seem to work on Windows 8.1. Whilst I can print no problem I cannot access the solution centre from my new laptop and i cannot scan. It gives me the message No scan options refer to device documentation to troubleshoot. It works fine on my old laptop which has Windows XP installed.
NB i have tried installing from your website and when i click on install it runs for a few seconds then sends the error message that it cannot find the file.
Does this mean that the HP Officejet 4500 Desktop All-in-One Printer - G510a is not fully compatible with Windows 8.1. Help please I am getting very frustrated.

Hi amp229,
Welcome to the HP Forums!
I see that your are getting the specified file cannot be found error, during the installation.
Please try the following:
1.) Check that IE pop-up blockers are turned off before downloading the installer. Internet Explorer Pop-up Blocker: frequently asked questions.
Then try the install.
2. If you're running McAfee Live Safe or any other firewall, please temporarily disable the "real time scanning". Turn off real-time scanning.
Then try the install.
3. Go to the start screen (you may also press the windows key + R to open the run box) and type %WINDIR% this should show the windows folder.
Click on the folder and scroll until you see files. Look for a filed named "HPWINS*.DAT" (the * is for a number that varies) remove this file and try the installation.
Then try the install.
Hope this information helps, and have a great day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Error code B81AA24C on my officejet pro L680 all-in-one ... can printer be fixed? how??? thanks..

error code B81AA24C on my officejet pro L680 all-in-one ... can printer be fixed? how??? seems to not power up ...thanks..

Hello
Is it possible to do a reset on the unit? Via: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00841912&cc=us&dlc=en&lc=en&product=2512009&tmp...
To try to get it in default mode
Kind regards
Best regards,
Say "Thanks" by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"
Although I work for HP my posts and replies are my own .....

HP Deskjet all-in-one F4440 will not print

My HP Deskjet all-in-one- F4440 will not print. I have put in a new color and a new black cartridge. It clanks loudly when it moves back and forth. Finally it stops and then pulls plain paper through as though printing on it - does this two or three times. then it pulls plain paper halfway through and stops. I have to tug and carefully pull halfway paper back out towards front to remove.

Hi there,
Could you provide the community with a little more information to help narrow troubleshooting? Are there any error messages or flashing lights? What operating system are you using?
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Any suggestions for an all-in-one "cable modem router print server" (N)

any suggestions for an all-in-one "cable modem router print server" (N)?

If that's a problem with your cable company, change the company.
If your cable company is not able to provide you with a cable modem which gets you full performance for their service why would you bother with that company or try to make it better than them?
If you subscribe to a 100 Mbit/s service they must be able to provide you with a modem that does 100 Mbit/s and be able to demonstrate you 100 Mbit/s on your cable.
If they are unable to provide you with a modem which does 100 Mbit/s and thus cannot demonstrate that the service they have installed in fact can do 100 Mbit/s but only give you a 50 Mbit/s because that's the best they have, why bother buying yourself a better modem to find out whether or not their service does what it promises or not??
In addition, an integrated device won't get you better performance. On the contrary, consumer devices are generally single CPU (and core) devices. It's usually running some Linux or similar. If a single process gets overloaded it can drag down the performance of the whole device. For instance, let's say there is a bug in the print server software of the router. You print something and it hangs and the print server process on the router runs wild. Now the CPU is fully loaded and the routing performance will go down. If there is a bug in the routing software it will bring down the whole device and you can't even print.
You'll get the best performance if you use dedicated devices because then one device cannot overload another. Get a modem. Get a wireless ethernet router. Get a printer with integrated print server. That's far better.
It's like the all-purpose audio device compared to components...

IHP F2210 all in one deskjet, need to print in black, but prints in color

My HP F2210 all in one deskjet, is having printing issues. When I set it to print in draft in black ink only, it then prints in color, I just don't understand WHY, can anyone offer assistance?
thank you
miricro

Hi there miricro,
This article should cover the issue you are experiencing. Give the steps outlined a shot and let us know if it helps.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

I keep trying to print an adobe pdf-and today all of a sudden they wont print and instead opens a "save-as" MS word window

i keep trying to print an adobe pdf-and today all of a sudden they wont print and instead opens a "save-as" MS word window prompting me to do that instead of simply printing

Look in the print menu (more than likely under "Advanced") and deselect the box that says "Print to file".

C7250 All in One "Disconnected" error when trying to use Solution Center

This C7250 All in One is connected via USB to our home desktop, and we also connect wirelessly when using laptops. From my laptop when printing from various programs or e-mail the printer works fine. However, when I open Solution Center to attempt scanning or managing documents Solution Center says "Printer Disconnected" and will any functions through this program. Any ideas?

Hi All,
I got this resolved by myself. I have used a static text in my report with html code. HTML code contains &nbsp for space. And the issue was that I did not terminate &nbsp with a semicolon. That caused the error.
Solution: If you are using html for leaving space between sentences, then always terminate like this -
:) J
Edited by: user10735873 on Oct 1, 2009 5:24 AM

HP Officejet 7410xi All-In-One shows error 0x07a74dds while powering-on and then stops

When I press the power-on button of my HP Officejet 7410xi All-In-One, the printer screen lights-up and shows the following:
Error 0x07a74dd6 at the top of the screen and 1959:lib_barracuda.c at the middle of the screen.
At the front panel, the following lights stay flashing:
(1) Auto Answer (2) ! and (3) On
After that, none of the buttons operate. The printer is connected through USB cable to the computer. My system is Windows 7.
I already searched for answers in the forum and didn't find a solution. I unplugged the USB cable and plugged again. I unplugged the power cable and when I plugged it back the same thing happens again, as described above. Please, let me know if there is a solution. Thanks.

HI again,
I am attaching a document that has additional steps to troubleshoot these 0x type error codes.
See if additional troubleshooting from this document helps you.
0x error code troubleshooting
Say Thanks by clicking the Kudos Star in the post that helped you. Please mark the post that solves your problem as Accepted Solution.
I am employed by HP

Photosmart C5280 all-in-one Cartridges error message

hi, I have a Photosmart C5280 all-in-one. It's been good until today when I got an error message:
! Print Cartridges refer to printer documentation.
I've only ever used genuine HP cartridges. I have the correct ones in - 75XL tricolour and 74XL black.
I've taken them out, reseated them several times to no avail, the error message will not leave and the printer will not function. Any ideas please?

Hi there Crouch11,
Welcome to the Forums
I noticed the issue you are having with your Photosmart C5280 now showing you an ink cartridge error. I suggest following the guide below to see if this can be resolved for you.
'Incompatible Cartridge' or 'Cartridge Failed' Message Displays on the Computer in Windows After Ins...
Feel free to reply with any issues you may have and I will do my best to help.
Thanks,
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Hp1510 all in one scan error

I have just buy this printer but it shows scanning error. i have already used hp print scan dr. but issue does not ressovle.When I open Start>all programms>HP>HP scan.......then it shows "hp 1510 series was not found" AND I am Install all Software drivers which is said by HP print scan dr.I am use xp sp2 having ram 768mb and intel 1.7ghz processor.

I'm facing a similar problem with an HP Photosmart C4380 All-in-one. Having scanned well at the start, it now tells me that it "cannot allocate memory or system resources to complete operation." HP said it was an Apple problem and would not help. I've tried re-installing CD etc. but message still comes up and it won't scan. Can anyone help? Thank you.

HP all in one C309a: Error message: Wireless Radio is not functioning. Contact HP support

Today all of a sudden, a 2 year old HP Photosmart C309a All-in-One printer is not longer connecting to my local Wireless Home Network. There is no change to network configuration to the TLink 3000 hub that I was using. All other clients (Mac OX, Vista, Ubunta 11.1, various versions of iOS and Android Icecream Sandwich) have no problem connecting to the same hub. No change to the network configure on the Printer. The machine have been standing as a stand alone machine and connected wirelessly to the network since day one in the corner of my office. Its within range of my router. I ran Wireless Network Test report to see what's going on. The title says "The Wireless Radio is not functioning. Contact HP Support" . Any number of reboot cycle didn't help. Out of frustration, I press "reset back to Factory Setting" on the printer. I did that, and then press "Wireless Network Wizard", and it was on "Searching for Wireless Router" forever... What opinions do I have? Get a new printer? or use good old 10-base T network cable to hook up the machine?

My HP C309a had exactly the same problem. Everything I found on the internet said that the printer could not be fixed and the only solution was to buy a new printer. The printer report said the wireless radio was not functioning. A factory reset did not fix the problem either. I had a problem with my HP Pavilion dv6000 laptop with the video graphics IC. The solution for that fix was to do a solder reflow of the graphics IC. Did it and fixed the problem. I figured maybe the same fix would work on my printer as I didn't have anything to lose at this point. I located and removed the wireless radio board in the printer (on the left side upper right corner). I then did a solder reflow on BOTH sides of the board. I put the board back into the printer and wa-la, it connected immediately to the network. It has been functioning with no problems now for at least four weeks now (knock on wood). Hope this helps.

HP Officejet 5610 all in one Communication Error Message on Mac with 10.10.2

Hi,
I got a new MAC computer running 10.10.2 Yosemite. I own the HP 5610 Officejet all in one printer. The new computer doesn't recognize the printer or scanner. I went to my applications folder and tried to uninstall the HP software but the printer doesn't show up there. I also downloaded the 3.0 software driver and tried to install it.
I can print from a document without a problem but I can't scan.
Any ideas on how to solve this/
Thank you.

Hey @PRLady ,
Welcome to the HP Support Forum. I understand that you're having scan to Mac issues with your HP Officejet 5610 All-in-One Printer. I would like to assist you with enabling scan to Mac OS X 10.10 Yosemite.
My colleague @X-23 has assisted another HP printer user with essentially the same issue in another Forum post. Click here to access troubleshooting steps that may resolve your scanning issue.
As HP has not released a Full Feature driver available that's directly compatible with Mac OS X 10.10 Yosemite, my colleague has outlined the steps in which you may add your printer into the Mac. (In this type of setup you would be using the built-in HP drivers that are available through Apple).
Please respond to this post in regards to your troubleshooting result. Best of luck with your setup!
E-roq
I work on behalf of HP.
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

C6280 All in One ink error message

Hi there,
I have the HP photosmart C6280 All in One printer that recently requested that I replace the Magenta ink. I did so but when I attempt to print I get the following message.
To print in color, instal the following cartridges:
Magenta
To print with black only, click black only. to begin printing on certain products, press the Resume button on the printer control panel. the printer will replace colors wit grayscale.
To cancel, press the cancel button on printer.
If empty ink cartridge is not replaced soon, all printing will stop.
I have had this issue before and someone told me how to fix it but I can't find the original message or email for it at all but it work fabulous and I think it involved a reset. Can anyone assist me with this, perhaps explain how to reset the C6280.
Thank you

For resetting the printer ink system, try this document:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01709782&cc=us&lc=en&dlc=en&product=3194498
Removing the ink/power reset procedure can eliminate the cartridge message.
For missing colors in the output, try this document:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01124477&cc=us&lc=en&dlc=en&product=3194498
NOTE: step 8 has a hyperlink that is no longer valid. The cleaning of the printheads will affect your color output greatly.
I hope this will help you.
007OHMSS
I was a support engineer for HP.
If the advice resolved the situation, please mark it as a solution. Thank you.

HP ENVY 114 all-in-one d411c and wireless printing.

I have a HP ENVY 114 all-in-one d411c printer connected wirelessly and a HP Pavilion HPE h8-1237 which is also connected wirelessly to my NetGear N750 Wireless Dual Band Gigabit Router. The problem is that the printer, according to the desktop computer, is constantly going OFFLINE. I have tried reinstalling printer software, ran the Print and Scan Doctor, etc. with no luck. I think the problem is with the desktop computer because I also have a HP Pavilion dv7 notebook which is also connected wirelessly and it can print all day long with no problems, never goes OFFLINE. I don't know what else to do. I recently upgraded both computers to Windows 8 Pro. The printer worked fine when I was using Windows 7 Ultimate. I need some suggestions, Please. Thank You in advance.

Sounds like you are having issues with your printer going offline? Now is this actually inhibiting your printing? Because if the printer is in sleep mode it will register as offline. If you ARE having issues with printing, then we can check some of the setting on the router. Here are its specs :
http://reviews.cnet.com/routers/netgear-n750-wireless-dual/4507-3319_7-34467825.html
Here I can see that there are potential hazards, I would recommend contacting Netgear and making sure that the router is broadcasting on the 2.4GHz range, and that it is set for 802.11g and not 802.11n wireless. These could effect your printer's responsiveness.
Run this diagnostic tool :
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c03286146
And as a last bit, you might want to consider setting the printer up with an Ethernet-network connection and seeing if the issue is with the method of communication.
Let me know and I will get right back with you!

HP Desktop All in one F4235 Error, wont print

Similar Messages

Maybe you are looking for