HP DESKTOP ?

I wil be purchasing a new desktop in a couple weeks but I have a few questions. Currently I am looking at the HP Pavillon i3 processor with 8 GB memory what is the difference in processing speed Vs. the HP AMD Athlon11 Quad core processor?
Is the HP-20" widescreen flat panel LCD monitor model S2031 compatible with the HP pavillion i3 processor model p7-1030.
Thanks
Bill

Hi,
Thanks very much for considering an HP desktop. NoNoBadDog, thanks as usual for your expert response. There was a second inquiry--regarding a monitor's compatibility with the new desktop. Since S2031 monitor was introduced in 2010 my initial response is yes it is compatible with the p7-1030. I have now checked the specs of the monitor in case it is something "different" and it should work: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02190464&cc=us&dlc=en&lc=en&jumpid=reg_R1002_US....
For ready reference, here are the specs for the computer: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02858518&tmp_task=prodinfoCategory&lc=en&dlc=en.... Since I am not the technical expert, let's wait for NoNoBadDog to confirm.

Similar Messages

PhotoShop CS2 Bridge caused strange loss of desktop visibility/memory ??

I have a G5 (Duel) running Tiger 10.4.6. Just lately the Bridge in Photoshop CS2 has not been working too well - it became very slow and sometimes didn't "see" my images. Yesterday I could get it to find my image folders at all. Then all my desktop started to look weird - even when I wasn't using the Bridge. So I closed all the applications and restarted the computer. To my horror all my desktop and preferences (dock, safari, desktop picture, folders etc.) had been lost. At first I thought I had somehow lost all my image folders but using spotlight I found them all there - distribted in places I had never put them. I sorted everything out again and re-did all my customised stuff but it was scary! At no time did the computer give me any warning of any trouble. It did not crash or anything. I was running QuarkXpress 5 (classic 9) as well and had a Skype window open (although I wasn't using it to talk at the time) Does anyone have any suggestions as to why this happened - has it happened to anyone else ? Thanks for any help.. Diana
Mac G5 Mac OS X (10.4.6) Duel 2.3 1.5 GB DDR SDRAM

windscape wrote:
Hi jamba,
I think the issue is that your output of lspci shows no Audio device. Perhaps it got disabled in the BIOS? dmesg output may indicate something else afoot with your audio hardware.
Hope that helps.
I'll check out dmesg output. also still need to check if something got disabled in the BIOS.
!snd_intel8x0m <- is your problem. Your sound module got blacklisted so un-list it. Modprobe it then try sound again or just reboot and it should work.
moonswan. snd_intel8x0 is the sound card (I think), in the alsa wiki it said it was recommended to blacklist snd_intel8x0m as a quirk fix.
No sound with or without it blacklisted still :-(
thanks

Download error in (osx) adobe desktop app (corrupted download link).

Here is a discription of the problem. Please consider that some of the wording might not be correct, as I do have to translate the error message from German into English.
Using OSX 10.9.2, when clicking inside the adobe desktop app (top of the screen bar) on the tap "apps", the following screen (screenshot) appears, which states, translated from top to bottom:
download error
download error. Please contact support.
(link) contact support
(link/button) download creative cloud -> This button unfortunatly leads to the following error page "http://www.adobe.com/special/errorpages/404.html"
All apps, like Bridge, Photoshop, Lightroom, etc. are installed and work just fine. So no problem here. I seem however unable to redownload the desktop app (in order to reinstall). As stated above the provided link inside the desktop app itself is coruppted and within the (online) web-based download centre (user logged in) I am only adviced to use the desktop app. This is a dead end and I do not know what to make of this error, let alone solving it. Please help!

I am sorry Romsinha but this doesn't really help.
I already restarted the desktop app and while I am obviously online and connected the problem (error message) remains the same. Information within the "home" tap is recieved/loaded (little blue spinning wheel) stating that various apps recently have been updated. Yet the same loading wheel within the "apps" tap results in an error. My best guess is that some internal link within the app is corrupted, leading to a source on a server that can not be reached.
UPDATE
I clean uninstalled adobe creative cloud as discribed in the article you provided (using the cleaner tool) and even uninstalled the browser plugin. After downloading and reinstalling creative cloud the problem however remains the same. "Apps" tap still shows the same problem. "Home" tap now displays the following:

ADOBE CLOUD ON MY DESKTOP WILL NOT WORK. IT LOADS UP BUT NOTHING FILLS THE WINDOW

ADOBE CLOUD ON MY DESKTOP WILL NOT WORK. IT LOADS UP BUT NOTHING FILLS THE WINDOW

BLANK Cloud Screen http://forums.adobe.com/message/5484303 may help
-and step by step http://forums.adobe.com/thread/1440508?tstart=0
-and http://helpx.adobe.com/creative-cloud/kb/blank-white-screen-ccp.html

Adobe Cloud is installed on my desktop and one laptop computer. Upon noticing updates were available yesterday, I successfully installed them on my laptop. Today, I cannot get Abobe Cloud to open on my desktop.

Adobe Cloud is installed on my desktop and one laptop computer. Upon noticing updates were available yesterday, I successfully installed them on my laptop. Today, I cannot get Abobe Cloud to open on my desktop.

We don't know what Apple plans on doing to change this (and it may not be just Apple but more likely the publishers, since Apple would, of course, do whatever it could to maximize sales/profits). Right now you can only read Apple books on mobile devices. Sure, buy them from Amazon if you want to read them on the computer. We don't work for Apple so we're pretty impartial on this kind of advice.
You might also see what your library can offer. My wife can browse the county library from her iPhone, borrow e-versions, and read books on it too. Free!

ALL MY DESKTOP APPS CONVERTED TO PDF FILES.

After sending an urgent email attachment in Adobe PDF to Government Offcom, all my Desktop applications in windows 7 64 bit have been converted to PDF files and cannot be opened.   The attachment used was sent to me by my Secretary remotely using an old MAC.
I can return my laptop to normal operation by un installing my Adobe Reader 11 app, but the problem returns when I re Download Adobe Reader
11 again.     After discussing this with Adobe Technical in London they advised me to raise this issue with your Adjudicators in this Forum.
Please assist asap as this is very urgent right now for several genuine reasons.
Many thanks.   Derek Horder.

See if anything in here helps: https://helpx.adobe.com/acrobat/kb/application-file-icons-change-acrobat.html

I can't save downloads to documents folder, only to desktop...

Only desktop saves are allowed. The message states, "Word cannot save or create this file. This disk may be full or write protected..." The disk isn't full, so I'm not sure what to do. I'm having to save everything to the desktop and then move files into document folders in Finder. Any advice on how to save directly to documents or what may be wrong? Thanks so much!.

Back up all data now.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. If none of this is meaningful to you, you don't need to worry about it.
Step 1
If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. You can demote it back to standard status when this step has been completed.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Drag or copy — do not type — the following line into the Terminal window, then press return:
sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -R $UID:20 ~ $_ ; chmod -R -N ~ $_ 2> /dev/null
Be sure to select the whole line by triple-clicking anywhere in it. You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. You don't need to post the warning. If you don’t have a login password, you’ll need to set one before you can run the command.
The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
Step 2
Boot into Recovery by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
When the OS X Utilities screen appears, select Utilities ▹ Terminal from the menu bar. A text window opens.
In the Terminal window, type this:
resetpassword
That's one word with no spaces. Then press return. A Reset Password window opens. You’re not going to reset a password.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select  ▹ Restart from the menu bar.

Memory modules not working on HP Touchsmart 600-1050sc desktop - update BIOS ?

Hi
I just bought 2 x 4GB DDR3 PC3 12800 memory modules from Cruical (see http://eu.crucial.com/eur/en/touchsmart-600-1050sc/CT5311446)
The modules does not work on my HP Touchsmart 600-1050 sc desktop. Acc to HP specs it should support 2 x 4GB (max 8 GB in total).
But the computer does not start (I have installed the modules correct). The manufacturer advises me to update my BIOS.
I wanna ask you guys, before I try suhc a thing, is there any chance this could help?
Thanks

Hi,
Its specs:
Memory upgrade information
Dual channel memory architecture
Two DDR3 SO-DIMMs (200-pin) sockets
SO-DIMM type-PC3-10600 (DDR3-1333)
Non-ECC memory only, unbuffered
Supports 2 GB DDR3 SO-DIMMs
Maximum memory only if using 2GB DDR3 DIMM modules.
Supports up to 8 GB on 64-bit PCs
Supports up to 4 GB* on 32-bit PCs
Please try PC-10600 RAM
Regards,
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

IMac running 10.7.3 stuck on rainbow wheel right after desktop launches and google chrome trying to restore a previous browsing session

Hello All - thanks in advance for your help with this.
The problem I'm encountering is on an iMac 24" from 2008, Intel Core 2Duo 1.3 GHz processor. I'm running 10.7.3 but have yet to install the client combo update.
My computer would not wake from sleep this morning after having been left on all night. The last two apps I had been running last night before this morning's freeze up were Google Chrome and iTunes. I restarted the computer and noticed at the login screen that one of the login accounts that is normally set up for use had disappeared. Once I logged in to my account, which had not disappeared, and arrived at the desktop, Chrome automatically tried to relaunch and restore the previous session with a note indicating that the browser had not been quit properly.
iTunes was running as well but had no functionality - non responsive to mouse click commands, etc. About thirty seconds later the rainbow wheel appeared and began spinning.
Tried force quitting both applications applications respectively but the finder was non-responsive as well. The dock would pop up when moused over but I was not permitted to select any of the icons. Restarted the computer and essentially the same thing occurred but I was able to quit out of iTunes this time before the rainbow wheel started.
Tried restarting with all peripheral hardware disconnected. No change. Tried booting up in safe mode - didn't work. Rebooted in disk utility mode - ran disk verification and was told all was well. Ran permissions verifications and was told there were problems. Repaired the permissions issues successfully. Rebooted again but same issue with desktop/apps freezing up. Rebooted into Disk Utility mode and tried a reinstall of lion - reinstall successul but upon normal reboot desktop still frozen once I launched Chrome and attempted to get to apple site to download the 10.7.3 patch.
Tried rebooting in disk utility mode to restore from a time machine back up - the external hard drive where my back ups are stored did not appear as a restore source even though I had reconnected the USB cable.
I then rebooted again into disk utility mode and tried to use safari to navigate to the apple site and download the 10.7.3 client combo update. No dice - received error messages saying the download could not be completed because there was insufficient memory available.
Called Apple - rep said I should take the computer in to the store - refused as of the time of the call because I had already wasted half the day on this and didn't want to flush the remainder down the toilet hanging around at the Apple store. So much for that - the day is now totally wasted any way.
Another couple of bits of information which may or may not be helpful:
When I'm in disk utility mode the disk image icon at the top of the list of disk images/mounts on the left hand side of the utility window is in red text: 320.07 GB WDC WD320...and the main dialogue box says: "This drive has a hardware problem that can't be repaired. Back up Data and see Apple dealer for help." One might conclude that my computer is therefore dead...not exactly. This happened once before after trying to set up a bootcamp partition using XP instead of windows 7. XP is not supported by Lion but I was trying a work around. Soon thereafter I upgraded my OS to 10.7.2 (or.3 can't remember) using software updater instead of a full native download from the Apple Support site and the computer went bananas. After the upgrade I was getting the CUI ???? errors which have since become infamous. While working with Apple phone support on the CUI issue and using disk utility on that issue, that same red text disc image came up and the note about my hardware having failed as described above. Apple told me I was cooked and my machine was finished. They were wrong. I can't remember what I did but I worked on the problem a bit more and was eventually able to upgrade my OS from the native download and get my machine back in order and runnign fine.
I recently attempted the bootcamp partition (stupidly) work around for XP again without success - last week before all of the latest drama set in. YES I have learned my lession and will not attempt this again.
So that's what's going on - sorry for the Moby Dick lenght description but I figured the more details available the more likely some one is to know how to fix the problem.
Any thoughts, suggestions, HELP please!!!
Thanks.

Hello All - thanks in advance for your help with this.
The problem I'm encountering is on an iMac 24" from 2008, Intel Core 2Duo 1.3 GHz processor. I'm running 10.7.3 but have yet to install the client combo update.
My computer would not wake from sleep this morning after having been left on all night. The last two apps I had been running last night before this morning's freeze up were Google Chrome and iTunes. I restarted the computer and noticed at the login screen that one of the login accounts that is normally set up for use had disappeared. Once I logged in to my account, which had not disappeared, and arrived at the desktop, Chrome automatically tried to relaunch and restore the previous session with a note indicating that the browser had not been quit properly.
iTunes was running as well but had no functionality - non responsive to mouse click commands, etc. About thirty seconds later the rainbow wheel appeared and began spinning.
Tried force quitting both applications applications respectively but the finder was non-responsive as well. The dock would pop up when moused over but I was not permitted to select any of the icons. Restarted the computer and essentially the same thing occurred but I was able to quit out of iTunes this time before the rainbow wheel started.
Tried restarting with all peripheral hardware disconnected. No change. Tried booting up in safe mode - didn't work. Rebooted in disk utility mode - ran disk verification and was told all was well. Ran permissions verifications and was told there were problems. Repaired the permissions issues successfully. Rebooted again but same issue with desktop/apps freezing up. Rebooted into Disk Utility mode and tried a reinstall of lion - reinstall successul but upon normal reboot desktop still frozen once I launched Chrome and attempted to get to apple site to download the 10.7.3 patch.
Tried rebooting in disk utility mode to restore from a time machine back up - the external hard drive where my back ups are stored did not appear as a restore source even though I had reconnected the USB cable.
I then rebooted again into disk utility mode and tried to use safari to navigate to the apple site and download the 10.7.3 client combo update. No dice - received error messages saying the download could not be completed because there was insufficient memory available.
Called Apple - rep said I should take the computer in to the store - refused as of the time of the call because I had already wasted half the day on this and didn't want to flush the remainder down the toilet hanging around at the Apple store. So much for that - the day is now totally wasted any way.
Another couple of bits of information which may or may not be helpful:
When I'm in disk utility mode the disk image icon at the top of the list of disk images/mounts on the left hand side of the utility window is in red text: 320.07 GB WDC WD320...and the main dialogue box says: "This drive has a hardware problem that can't be repaired. Back up Data and see Apple dealer for help." One might conclude that my computer is therefore dead...not exactly. This happened once before after trying to set up a bootcamp partition using XP instead of windows 7. XP is not supported by Lion but I was trying a work around. Soon thereafter I upgraded my OS to 10.7.2 (or.3 can't remember) using software updater instead of a full native download from the Apple Support site and the computer went bananas. After the upgrade I was getting the CUI ???? errors which have since become infamous. While working with Apple phone support on the CUI issue and using disk utility on that issue, that same red text disc image came up and the note about my hardware having failed as described above. Apple told me I was cooked and my machine was finished. They were wrong. I can't remember what I did but I worked on the problem a bit more and was eventually able to upgrade my OS from the native download and get my machine back in order and runnign fine.
I recently attempted the bootcamp partition (stupidly) work around for XP again without success - last week before all of the latest drama set in. YES I have learned my lession and will not attempt this again.
So that's what's going on - sorry for the Moby Dick lenght description but I figured the more details available the more likely some one is to know how to fix the problem.
Any thoughts, suggestions, HELP please!!!
Thanks.

Unable to delete file from desktop

I'm trying to delete a .mp4 file from my desktop. On doing so I'm first prompted to enter the password in a window 'Finder wants to make changes. Type you password to allow this'. After doing so I get the msg 'the operation can't be completed because you don't have permission to acess some of the items'.
I have checked the permissions in the get info tab and it has read and write acess.
Kindly help me with the issue.

Hi Niel,
Thanks for the quick reply. M sorry by mistake i clicked on 'This helped me' .. hw can I change it to 'this solved my question'.
Well I was stuck as I was trying to lock unlock general properties of the file whereas my desktop general properties was in locked state.
Quite new to the mac..getiing used to it.. thanx a ton !!..

Cannot delete file from desktop

I dragged this file to my desktop (off a flash drive or something) a few weeks ago and since then, it will NOT delete. Whenever I try and drag it to the trash it won't let me because it's locked.
Here's the file icon and the message I get: http://tinypic.com/view.php?pic=2gt3dr5&s=3
Any help appreciated. Thanks.

http://docs.info.apple.com/article.html?artnum=25554

When I login, all of my desktop items are gone, the "Finder" icon is bouncing and a message asking to restore windows is blinking but unresponsive. I can't exit out of it. What do I do? I've tried force quitting, and it doesn't get rid of it.

When I login, all of my desktop items are gone, the "Finder" icon is bouncing and a message asking to restore windows is blinking but unresponsive. I can't exit out of it. What do I do? I've tried force quitting, and it doesn't get rid of this message. When I login to my husband's account, this message does not appear.

Hey sunnyday7!
Here is an article that can help you address this issue:
OS X: How to quit an unresponsive application using Force Quit
http://support.apple.com/kb/ht3411
Additional Information
OS X automatically relaunches the Finder when it is quit. If the Finder is unresponsive, use Force Quit to relaunch it. Select Finder in the Force Quit Window or Dock, then click Relaunch.
Thanks for using the Apple Support Communities. Have a good one!
-Braden

When I login to Horizon View, it shows me the list of desktops to connect to. If I'm entitled to only one desktop then can View auto connect me to that desktop instead of me clicking on Connect?

When I login to Horizon View, it shows me the list of desktops to connect to. If I'm entitled to only one desktop then can View auto connect me to that desktop instead of me clicking on Connect.

Yes you certainly can.
Right click any desktop in the list > Settings > in the left pane select the desktop you want to auto connect to > check "Auto connect to this desktop".

Frontrow left running @ 100% after returning to Desktop - bugfix required

Tonight my wife and I were watching iTunes TV Show Videos on our living room TV using her black Macbook with lid closed for about 4-1/2 hrs. I had downloaded these TV videos with iTunes on my PowerMac G5 and shared them to the Macbook. The Macbook was connected to the TV using the Mini DVI to video adapter and a sound connection from headphone jack on Macbook to the TV sound L/R inputs. The Magsafe power was connected all the time. The TV videos played just fine and we paused the Front Row periodically.
When we were done watching the videos I powered off the TV and disconnected the Mini DVI and the sound connections and removed the Magsafe power. I the opened the Macbook lid and the fans started to pick up and make a fair amount of noise.
I launched Terminal.app and launched top to see what was running and found Frontrow was running at around 100% cpu with its resident memory growing at an alarming rate. I watched this for about 5 mins and Frontrow climbed to just over 500 MB with the cpu use still at around 100% all this time.
I used the remote to see if I could get the attention of the Frontrow process that was using 100% cpu and memory bloating but to no avail. The rcd (remote control daemon) process did launch when pressing the remote's Menu button but it did nothing.
I then decided enough was enough and I quit the top display and issued a 'kill 508' where 508 was the Frontrow PID. Frontrow was killed and when using the Remote the Frontrow restarted as it should.
Thought I should post this Frontrow anomaly in case others may be wondering why their Frontrow doesn't quit as it should when returning to the Desktop mode.
I will also send feedback to Apple about this mis-behaving Frontrow.
Anyone else experience this Frontrow behaviour ?

I forgot to mention a couple of things.
The communication for sharing the iTunes TV Videos between the PowerMac G5 and the Macbook was via Airport Express which was located some 25 feet away from the MacBook and the signal strength was at max.
I was also running 10.4.7 on both the PowerMac G5 and the Macbook.
The Macbook is equipped with 2gig RAM also.
No other Apps were running with Frontrow on the Macbook other than iTunes for accessing the PowerMac's shared iTune's Video files.
There was one moment during watching the videos on the TV when sharing stopped. This was because the PowerMac was set to sleep via Energy Saver at 1 hour of zero activity. THis was resolved by waking the PowerMac G5 up and configuring it to never sleep.

HT4241 Mini DVI to HDMI adapter. Not gettint desktop to show on TV

I have the Apple mini to HDMI adapter. When I plug my late 2008 Mac 13" up to my TV, it doesn't show my desktop. It acts like a 2nd screen. I can drag stuff from my Mac desktop over to the TV. Is there a setting I am not finding I need to change?

You have the display set in Extended Desktop mode with the MacBook as the main screen. The Menu Bar and Dock will be on the MacBook display and your background screen on the TV but you can move the cursor onto the TV screen.
In System Preferences>Display on the MacBook screen there should be an Arrangement tab when you have the MacBook hooked up to the TV and both screens working. When you click the Arrangement tab do you see two monitors side by side? One of them will have a Menu Bar at the top. Just click on the Menu Bar and drag it to the second monitor. That will make the second monitor your main screen.
The TV will now have the Dock and Menu Bar and windows will open on it. But you can move the cursor to the MacBook screen and move windows from the TV over to the MacBook screen.
You can now use your MacBook in Clamshell Mode with a wired or Bluetooth keyboard and mouse. http://support.apple.com/kb/HT3131 When you disconnect from the TV your Menu Bar will automatically change back to the MacBook.
Or if you want to work on the MacBook screen while showing it on a TV you can check the Mirror Display box on the lower left hand side of the Arrangement tab under the two monitors box. That will give you the same screen at the same resolution on both the MacBook and the external monitor.

IOS Remote Desktop app and computers connected to SBS 2008--can't get it to work

I can connect directly to the server without a remote resource in the IOS app.
But I'd like to be able to connect to computers in the office like we can through RWW. RWW works fine, but not from my phone. (Yes I can connect to the server and take over computers from the phone but I don't want other people in the office to log
into the server first!).
I can never get the remote resources section in the app to connect. I usually get "Unable to locate any remote resources for the URL". error in the resources section. I've tried a simple "https://remote.domain.com", "https://remote.domain.com:987",
etc.
We have a self-signed certificate. I can't think of anything in the server setup that is anything other than normal.
I can do direct connect using "Remote Desktop Connection" in windows 7. In the remote desktop server settings I just put remote.domain.com and "Ask for password (NTLM)" for the login method. Then on the general tab I have just the
simple computer name and the domain\username. That's all I had to setup to get that to work.
Any suggestions?

Hi Michael,
Thank you for posting in Windows Server Forum.
Have you setup RD Gateway server in your environment? Are you trying to access the RWW through it?
On server side you can choose “Bypass RD Gateway server for local addresses” under RemoteApp manager and check the result.
For more information, you can check below links for detail.
Remote Desktop Client on iOS: FAQ
http://technet.microsoft.com/en-us/library/dn473015.aspx
Getting Started with Remote Desktop Client on iOS
http://technet.microsoft.com/en-us/library/dn473013.aspx
Hope it helps!
Thanks.
Dharmesh Solanki

HP DESKTOP ?

Similar Messages

Maybe you are looking for