HP Device manager for C6100 series on macbook freezes after 1.1.1 update

Okay, I had this same issue on my Powerbook after the hp 1.1.1 update for my C6100 Photosmart printer/scanner and I Googled the answer but didn't save it - I now have the same issue on my MacBook Pro. When I try to scan via the HP Device Manager I get an error "the program may be unstable, it is recommended that the program be closed and restarted"
I know the resolution is to remove the 1.1.1 update but I can't remember how the heck to do this... anyone? Help! I know it's super easy and I'm stuck.
Thanks all!

That doesn't work. I ended up just using the uninstaller and removing the entire thing and then by the CD I reinstalled it again so it doesn't have the update 1.1.1. Of course it asks if I want to update when the updater runs I deselect it. Now I remember there is a simple way to make it skip this update every time too so I don't inadvertently install it again but I don't remember that simple task either.

Similar Messages

VMS 2.3 Device package for 3800 Series

hi
We are having VMS 2.3 installed which is not able to monitor or to perform any operations on 3800 series routers.
How we can add device pack for 3800 series routers ?
And from where to download the pack ?

The device pack is available for download on Cisco.com and you can get it if you have correct licence. After downloading the pack stop the cisco works deamon manager service and and apply the pack.

Free CiscoView Device Manager for Cat6500

Cisco Systems® announces the CiscoView Device Manager for the Cisco® Catalyst® 6500 Series Switch, Cisco Content Switching Module (CSM), and Cisco Catalyst 6500 Series SSL Services Module (SSL SM). CiscoView Device Managers are three management applications embedded in these products to offer extensive GUI-based feature management within a single chassis. For more information and to download these applications, visit www.cisco.com/go/cvdm

If you use the old link:
http://www.cisco.com/cgi-bin/tablebuild.pl/css11500-crypto
You'll get redirected to CVDM for the CSS11506. It's the same CVDM software as the CSS11501 and CSS11503. Don't know why only the CSS11501 link is broken.

My 3rd generation ipad even though my battery is at 100 % the screen goes black after sitting for more than 15 mins. The only way to get it to come is by resetting the ipad. Is there a fix for this. It all started after the last two updates.

my 3rd generation ipad even though my battery is at 100 % the screen goes black after sitting for more than 15 mins. The only way to get it to come is by resetting the ipad. Is there a fix for this. It all started after the last two updates.

Try a Reset...
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
If no joy... Try a Restore...
1: Connect the device to your computer and open iTunes.
2: If the device appears in iTunes, select and click Restore on the Summary pane.
3: If the device doesn't appear in iTunes, try using the steps in this article to force the device into recovery mode.
From Here
Unresponsive iPad
http://support.apple.com/kb/TS3281

Why has my camera stopped working on Skype on my macbook air after running a software update to 10.8.5?

Why has my camera stopped working on Skype on my macbook air after running a software update to 10.8.5?

See this thread:
https://discussions.apple.com/thread/5306216?tstart=0
FIX:
1. You need Time Machine
2. Go to folder /Library/CoreMediaIO/Plug-Ins/DAL/
3. Copy AppleCamera.plugin to good place (usb memory stick is the best place).
4. Go to Time machine in date that skype work fine.
5. Change AppleCamera.plugin with file from Time Machine
6. Restart system, Now skype need to work with camera.
If that doesnt pass,
Suggest looking here, much success has been found:
http://community.skype.com/t5/Mac/OS-X-10-8-5-broke-Video-on-MacBook-Air/td-p/18 91729/page/4

My MacBook freezes after log in

Help my MacBook freezes after I log in.

If you hold down the "shift" key on your keyboard when you log in, does the same thing happen?

[t431s] Code 28 in Device Manager for all external storage.

I'm using Windows 8.1 on a t431s. I'm having this problem where none of my external storage is being recognized. Under "Device Manager" any sort of external storage I plug in ends up under "Other devices". When I click on the device, I get Code 28 "The drivers for this device are not installed." Trying to update the driver brings me nowhere. The devices don't appear under disk management.
What's weird is that other USB peripherals such as mice and USB headphones don't have any problem.
Here's what I've tried so far:
Updated the BIOS.
Used Lenovo's SCCM package for Windows 8.1
Tried installing the individual drivers for each hard drive.
Nothing works! What's going on here?
Thank you in advance for any suggestions.
Solved!
Go to Solution.

Hi, Buggy
After doing a bit of research. It seems your not the only one with this issue. WD has had this issue with even Windows 7 since 2012 with other Passport models.
I honestly recommend seeking support with WD about this issue if you have not done so already as the ones who where able to fix this issue did so with updated drivers from WD.
IT Specialist and Consultant
Lenovo Tablet Evangelist
Current Machines: IdeaCentre A300, ThinkPad Tablet, IdeaPad U410, and Yoga 3 Pro Touch
Deutsche Community Comunidad en Español
Lenovo - the latest in DOtabs, DOpads, DOcentre's, DOstations and DOservers!

Search in device manager for driver updated on a certain date.

How do I search for a driver I updated on 06/13/2014 so I can roll it back ? I can't remember which one it is. I was trying to download a game. The update slowed my machine way down and the print is much smaller.

Hi,
I’m sorry to tell you that you can’t find the driver in Device Manager by the way you said.
You can open Control Panel\System and Security\Windows Update
and click View Update History, then find the update according to
Date Installed.
Also you can start computer and typing F8, then click
Repair Your Computer to perform System Restore to fix this issue.

Mds95xx device manager for os 5.2.8a and above

Hi
I am looking into Cisco site for Device manager download for os 5.2.8a or above.
Someone can help me?
Many thx
Walter

Hi Walter,
There are two ways to get Device Manager.
(1)Install DCNM and DM will also be installed.
(2)Point your browser at the IP address of the switch and download it from there. Then run the "jxpiinstall.exe" file to install DM. However, to install it from here, you must have Java 1.5 and 1.6 or you will just get a "Certificate Revoked" message.
Best regards,
Jim

Device manager for 6500

I just transferred a 6500 officejet from a Mac laptop to my Windows XL pc.
I noticed that on the laptop there was a HP Device manager at the bottom of the desktop area, but there is not one on the pc, either in the system tray or HP folder.
Since the installation disc was not available, I downloaded the needed software from HP's website.
How do I get the Device manager onto my pc?
Thanks
This question was solved.
View Solution.

Hi,
The HP Device Manager is the software for Macintosh computers only.
From the Start menu select Programs > HP > HP Officejet 6500 and open the HP Solution Center program, that is the one available on a Windows PC for your printer.
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Device manager for E 63 ???/

what is the concept of the Device manager ? how it is useful to theuser. how to configure? plz reply soon

Hi there, I see you have asked several questions regarding your E63. Have you considered to read the User Manual that you received with your phone?? Or if you have lost or misplaced it, download the PDF version from your regional Nokia website (in this case, Nokia India). It would save you a lot of time and hassle to read the manual.
To answer your question quickly, Device Manager is where the current firmware version of your phone is displayed, and where you can check online for firmware updates (if your device supports Firmware Over The Air, as E63 is FP1 phone I am not sure that it does). You usually do not need to configure the settings as the settings to connect to Nokia servers are usually pre-installed.
If you found this or someone's comments helpful or like what that person has to say, please give some Kudos to their post!

Unknown Device in Device Manager for Lenovo G780 laptop, Windows 7

Hails all. I am trying to figure out what the Unknown Device is under Other Devices in my Device Manager. I recently got rid of Windows 8 and put Windows 7 64-bit on my Lenovo G780 laptop. I installed almost everything from the Lenovo site --- all of the drivers and such, software, etc. I cannot figure out what this device may be. The only external device connected to the laptop is a Kensington usb mouse. Any ideas?
I did run the PCI test program and the Motherboard test program that Lenovo provides and it didn't find any errors. Windows Update hasn't found update/driver/software for the Unknown Device. The Lenovo Solutions software only tells me to open Device Manager.
Link to picture
Moderator note; picture(s) converted to link(s) About Posting Pictures In The Forums
Solved!
Go to Solution.

Welcome to the forum!
Since Windows Update didn't pick up any missing drivers, I'm guessing you are missing a driver for a device that would be propriatary to Lenovo. During the installation of Windows 7, did you install the One Key Recovery software ? If not, the One Key Recovery button maybe triggering that exclamation mark in Device Manager since there is no driver to tell Windows what to do with that button.
If that wasn't the problem you can try running Unknown Device Indentifier to see if that utility can indentify the unknown device. The free program can be found at the link below........
http://www.zhangduo.com/udi.html
OR
Use the Direct Download link at...........
http://download.cnet.com/Unknown-Device-Identifier/3000-2086_4-42618.html
Owner & Operator of the following:
● Lenovo Ideapad Z570 w/ Win 7 & Win 8.1 Dual Boot ● Lenovo Yoga 3 Pro w/ Windows 8.1 ● Toshiba A75-S206 w/ Win 7
● IBM Thinkpad T-23 w/ Win XP ● IBM Thinkpad T-22 w/ Win XP • As well as multiple desktops dual/triple booting XP, Vista and Win 7.
★ Find a post helpful? Thank that member by clicking on the ☆Star☆ to the left awarding them a Kudo.
★ Posting a problem and a reply is helpful and it answers your question, please mark it as an "Accepted Solution"
★ I'm not a Lenovo employee, just a volunteer geek who likes to help folks. Enjoy your time here, pay it forward by helping others !
★ Sorry, I don't answer questions via Private Messages. Posting in the appropriate forum is the best way to get assistance.

Device Manager for IDS/IPS 4215

I am trying to view my IDS throught the web browser Device manager but am having trouble. I configured the sensor through the CLI. We are using the standard/default port 443. When I enter the https://ip address all I get is "can't display web page" . Does anybody have any tips or something I might have overlooked.
Thanks

Do you have Java runtime enviroment enabled
Maybe IDM access is not working thanks Java problem
Try following download java 1.4.2_07
https://sdlc5b.sun.com/ECom/EComActionServlet;jsessionid=5BED10CBB25347782DC40CB6AE5ECDF1
Download and install
M.

Device Manager and Desktop Software fail to work after a profile migration

Hi there,
I have just moved in a Windows Domain so I had to change my IP configuration. I have done a moveuser to move my local profile to the domain's profile. My Device Manager and, therefore, desktop software are not responding anymore. I keep receiving a message of ApploaderWEBSL-Upgrade[1].msi missing in the network location.... after a couple of hundreds of cancels, it goes away.
I have tried reinstalling the BB Original CD as an Domain Administrator selecting "4 all users". I have tried downloading the Windows Installer Cleaner. I have also tried to upgrade my device's software directly from the WEB. Finally, I have tried to "promote" my Windows Account as a Domain Admin.... nothing.
The poing is that if i log in as a Domain Admin, my device is automatically recognized by the device manager.... but I can't sink cause it's not my profile...
Everything was working before my domain enrolement and IP changes.... can anyone help me?
Thanks a lot!
Marcos.
Message Edited by mmarin on 02-13-2009 10:44 AM

Hello, The most common thing to do after an update that results in issues is to perform an OS reload. Sometimes, the update processes have errors and such...with a reload often curing the issues. The official methods, which will be controlled as to what exact OS versions you are offered:http://supportforums.blackberry.com/t5/BlackBerry-10-Functions-and/How-to-Reload-your-Blackberry10-O...The unofficial methods, which are cleaner, and allow you to choose an OS version that perhaps your carrier (or whoever it is controlling your offers) has been slow to approve:http://supportforums.blackberry.com/t5/BlackBerry-10-OS-Device-Software/Upgrading-OS10-devices-using...http://forums.crackberry.com/bb10-leaked-beta-os-f395/bb10-os-archive-943672/Of course, before you started anything, hopefully you already took a good backup via LINK, a manual copy of your Device Memory to your PC, and full documentation of your configuration (account credentials, added apps, configurations, etc.). Sometimes, restoring from a backup returns to the device the very corruption one needs to eliminate, and reconfiguring from scratch can resolve that. Good luck!

MacBook freezes after shutting the screen closed down

Since some time ago, my MacBook freezes when I close the screen down for substantial time like a few hours or maybe even an hour, so that I have to kill the MB by pressing the power button for a few seconds. I did this almost everyday for maybe a few weeks now. Perhaps this is the after effects of a fall and there is no cheap cure for it?

Many here have reported no wake from sleep or failure to sleep, running 10.6.3 and other versions, on MacBooks and MBPro's, using Parallels and VMware. Some say deactivating the Sudden Motion Sensor and shutting down Parallels and VMware ,before sleeping, helped.
DALE

HP Device manager for C6100 series on macbook freezes after 1.1.1 update

Similar Messages

Maybe you are looking for