HP Device Manager T610 Update Agent Fails

I am trying to clone an image from a T610 Thin client.  I can't update the agent or image.  I am using HP Device Manager Version 4.4.3. I get the following log.
2014-01-08 15:17:05 Successfully sent task to the Device Management Gateway
2014-01-08 15:17:09 Task has been retrieved by the Agent.
2014-01-08 15:17:13 Fail to execute task.
2014-01-08 15:17:13 ErrorCode: -1

Hi DavidApx,
Welcome to the HP forum. 
I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at http://h30499.www3.hp.com/hpeb/ .
I hope this helps.
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Similar Messages

  • Intel RAID error in Device Manager after updating Intel Matrix Storage Console

    The latest in my catalogue of problems arose after updating Intel Matrix Storage Console (IMSC) ...
    Lost my RAID volume, but both drives were OK. However, IMSC seemed to be freezing, so I thought I'd install the latest version from Intel. Once installed, it gave me errors saying a plug in was not found, followed by messages saying that the SATA and RAID drivers were not installed. Device Manager thinks the drivers are OK, but the yellow triangle with the ! is shown against the Intel RAID driver. Tried un-installing and re-installing the controller, updating the drivers, different versions of IMSC and still get the yellow triangle with the !
    I have been having trouble with the RAID0 set up for weeks so wonder if it has finally died? I'm out of ideas. Can anyone help?
    This post gives more details of the history and PC configuration: https://forum-en.msi.com/index.php?topic=121960.0

    Quote from: NovJoe on 23-March-09, 14:53:31
    Why don't you want to follow up with your previous thread?
    It'll be confusing when you started multiple threads linking to the issue.
    Sorry, I haven't posted here much so I'm not familiar with the protocols. I just thought it would be less confusing to make this a separate issue. I linked them to avoid duplicating info on my config & h/w

  • Device Manager and Desktop Software fail to work after a profile migration

    Hi there,
    I have just moved in a Windows Domain so I had to change my IP configuration. I have done a moveuser to move my local profile to the domain's profile. My Device Manager and, therefore, desktop software are not responding anymore. I keep receiving a message of ApploaderWEBSL-Upgrade[1].msi missing in the network location.... after a couple of hundreds of cancels, it goes away.
    I have tried reinstalling the BB Original CD as an Domain Administrator selecting "4 all users". I have tried downloading the Windows Installer Cleaner. I have also tried to upgrade my device's software directly from the WEB. Finally, I have tried to "promote" my Windows Account as a Domain Admin.... nothing.
    The poing is that if i log in as a Domain Admin, my device is automatically recognized by the device manager.... but I can't sink cause it's not my profile...
    Everything was working before my domain enrolement and IP changes.... can anyone help me?
    Thanks a lot!
    Marcos.
    Message Edited by mmarin on 02-13-2009 10:44 AM

    Hello, The most common thing to do after an update that results in issues is to perform an OS reload. Sometimes, the update processes have errors and such...with a reload often curing the issues. The official methods, which will be controlled as to what exact OS versions you are offered:http://supportforums.blackberry.com/t5/BlackBerry-10-Functions-and/How-to-Reload-your-Blackberry10-O...The unofficial methods, which are cleaner, and allow you to choose an OS version that perhaps your carrier (or whoever it is controlling your offers) has been slow to approve:http://supportforums.blackberry.com/t5/BlackBerry-10-OS-Device-Software/Upgrading-OS10-devices-using...http://forums.crackberry.com/bb10-leaked-beta-os-f395/bb10-os-archive-943672/Of course, before you started anything, hopefully you already took a good backup via LINK, a manual copy of your Device Memory to your PC, and full documentation of your configuration (account credentials, added apps, configurations, etc.). Sometimes, restoring from a backup returns to the device the very corruption one needs to eliminate, and reconfiguring from scratch can resolve that. Good luck!

  • 2 exclamations in device manager.

    I have 2 xclamations in device manager and system update is unable to find the drivers for it. Even windows update could not find them. but I dont have any issues with my laptop though. Just one problem CAPS lock doesnt glow but its functioning well. Please suggest if any ideas if it drivers issue.

    Actually the last time I checked the Ricoh drivers won't install on windows Seven, you need to extract the drivers, then go to device manager and update each device that is unrecognized manually by directing it to where you extracted the drivers.
    If you're using 64bit windows, then one of the devices needs to be pointed towards one of the sub-folders that has "64" iin it's name. You'll know which one when it cannot fint the proper driver and there are two folders that have "64" in the name. I forget which you need, but it's easy enough to figure out, one works, the other doesn't.
    ThinkPad W-510 i7-820QM(1.73-3.06GHz) Quad Core... ThinkPad T500, T9900, 8gb SSD...FrankNpad T-60p/61p (X9000 2.8ghz) 8gb SSD ips FlexView...ThinkPad T-61p (T9300 2.5ghz) 8gb ram...Thinkpad X-61 Tablet 4gb ram...ThinkPad A-31 (1.9ghz P4 1.5gb ram)

  • 6630 device manager update failed.

    Device Manager of 6630 failed to update/synchronise .Server not responding is my feedback I recieved.I have everything correct in my profile settings.Please can someone help me.
    Solved!
    Go to Solution.

    Hi amuana, 
    In order to fix this issue, I advise you to perform a soft reset on your phone: type *#7780#. Default lock code is 12345. If the issue persists, perform a hard reset. First of all, back up your data using Nokia Suite (Tools > Back up). Once your data is fully backed up,  type *#7370# on the keypad. 
    Alternatively, you may also check for updates on Nokia Suite (by going to Tools > Updates).
    Let us know how you get on and feel free to post any other questions you may have. 
    Regards, 
    astra2025
    Press the 'Accept Solution' icon if I have solved your problem, Kudos my post if my advice has helped you!

  • IOS Update via Device Manager - 2960 S and X Series Succeed, Others Fail

    Hello,
    I am doing a round of IOS updates on a small LAN with a mix of 2960, 2960S, and 2960X switches.  I have been using the built-in Device Manager, selecting the Software Upgrade option on the toolbar.  So far the 'S' and 'X' series switches have upgraded successfully.  The 2960 (WS-C2960-24TC-L) series have thus far all failed. 
    With this failing switch type I select the appropriate .tar, as usual, click the Upgrade button, and wait.  In every case the process hangs at step 1. 'Loading the tar file to the switch'.  I am trying to upgrade this failing switch type to 15.0.2-SE7.  The switches to be upgraded are currently at firmware versions ranging from 12.2.(50)SE1 to 12.2(55)SE7.
    Is anyone aware of any known issues with this series of switches that may cause IOS upgrades to hang in this fashion?
    Thank You,

    Please use [ code] tags https://bbs.archlinux.org/help.php#bbcode
    like this
    or [ quote ] tags instead of [ ins ] tags - that bright yellow if hard on the eyes.

  • Device Manager HP Printer ! Symbol, Windows "failed to connect" Sound- Yet Printer Works

    Every startup, I hear the Windows "device failed to connect" sound.  How can I get rid of this?
    I have an HP J6480 Printer with WIn 7.  Device Manager is not recognizing the printer driver. 
    Under Device Manager, the printer is listed with the ! error symbol.  No other devices have an error symbol.  Yet the HP Solution Center and printer work.
    1)  I have tried fresh installs of the current HP Full Feature Software. 
    2) I have tried the HP Uninstall program, going through all five Uninstall programs two times.
    3) I have run CCleaner to clear registry issues.
    4) I have tried deleting the Device Manager "Officejet ! J6400 series" entry.  The Solution Center and the printer then do not work.  Apparently, Device Manager recognizes the printer but not the driver.  I have to go to "Programs", "HP", then "Officejet J6400 Series" to reinstall the software. 
    5) I have tried to get Device Manager to recognize the software.  When I click on "! Officejet 6400 series",  I get the message "the drivers for this device are not installed (code 28)".  If I then click on "Update Driver" and select" Browse my computer for driver software" then click on "Browse "C:\Users\Myname\Downloads", where I have both the HP 13.0 Full Feature Sofware Software and the Basic Print and Scan Driver files, it says "Windows cannot find driver software".   If i click on "Search automatically for driver software" I get the same message.
    I would very much appreciate any ideas!  Thank you!
    This question was solved.
    View Solution.

    Friendlycomputr,
    Your persistence is admirable! I totally understand you just want it working properly. I really appreciate the updates, I am going to look into this and get back to you as soon as I can!
    Thanks again
    HevnLgh
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • Fatal Error with Java ME Device Manager and SDK Updates

    I recently installed the Java ME 3 EA SDK Platform which looks promising. Everything seem to work fine. In the process of new updates and the desire to remove some older versions of Java, I installed a new Java versions (1.6.0_11) and removed some old ones (1.6_0_04 and 1.6_0_10).
    Following this whenever I startup my machine, following the attempted start of the Java ME Device Manager, I get a "Fatal Error: Cannot start child. Error code: 0" dialog.
    Following this I get an exception indicating:
    java.net.ConnectException: Connection refused: connect
         at java.net.PlainSocketImpl.socketConnect(Native Method)
         at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333)
         at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195)
         at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182)
         at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366)
         at java.net.Socket.connect(Socket.java:519)
         at java.net.Socket.connect(Socket.java:469)
         at java.net.Socket.<init>(Socket.java:366)
         at java.net.Socket.<init>(Socket.java:180)
         at sun.rmi.transport.proxy.RMIDirectSocketFactory.createSocket(RMIDirectSocketFactory.java:22)
         at sun.rmi.transport.proxy.RMIMasterSocketFactory.createSocket(RMIMasterSocketFactory.java:128)
         at sun.rmi.transport.tcp.TCPEndpoint.newSocket(TCPEndpoint.java:595)
    Caused: java.rmi.ConnectException: Connection refused to host: localhost; nested exception is:
         java.net.ConnectException: Connection refused: connect
         at sun.rmi.transport.tcp.TCPEndpoint.newSocket(TCPEndpoint.java:601)
         at sun.rmi.transport.tcp.TCPChannel.createConnection(TCPChannel.java:198)
         at sun.rmi.transport.tcp.TCPChannel.newConnection(TCPChannel.java:184)
         at sun.rmi.server.UnicastRef.newCall(UnicastRef.java:322)
         at sun.rmi.registry.RegistryImpl_Stub.lookup(Unknown Source)
         at com.sun.jndi.rmi.registry.RegistryContext.lookup(RegistryContext.java:97)
    Caused: javax.naming.ServiceUnavailableException [Root exception is java.rmi.ConnectException: Connection refused to host: localhost; nested exception is:
         java.net.ConnectException: Connection refused: connect]
         at com.sun.jndi.rmi.registry.RegistryContext.lookup(RegistryContext.java:101)
         at com.sun.jndi.toolkit.url.GenericURLContext.lookup(GenericURLContext.java:185)
         at javax.naming.InitialContext.lookup(InitialContext.java:392)
         at javax.management.remote.rmi.RMIConnector.findRMIServerJNDI(RMIConnector.java:1871)
         at javax.management.remote.rmi.RMIConnector.findRMIServer(RMIConnector.java:1841)
         at javax.management.remote.rmi.RMIConnector.connect(RMIConnector.java:257)
    Caused: java.io.IOException: Failed to retrieve RMIServer stub
         at javax.management.remote.rmi.RMIConnector.connect(RMIConnector.java:323)
         at javax.management.remote.JMXConnectorFactory.connect(JMXConnectorFactory.java:248)
         at com.sun.jme.toolkit.remoting.client.rmiimpl.ObjectServerConnectionImpl.connect(Unknown Source)
         at com.sun.jme.toolkit.remoting.client.rmiimpl.ObjectServerConnectionImpl.start(Unknown Source)
         at com.sun.jme.toolkit.remoting.client.rmiimpl.ObjectServerConnectionImpl.lookupMBean(Unknown Source)
         at com.sun.jme.toolkit.remoting.client.rmiimpl.ObjectServerConnectionImpl.findObject(Unknown Source)
         at org.netbeans.modules.javame.common.container.devicemanager.DevicemanagerHelper.openConnection(DevicemanagerHelper.java:56)
         at org.netbeans.modules.javame.common.container.devicemanager.DevicemanagerHelper.getDeviceManager(DevicemanagerHelper.java:73)
         at org.netbeans.modules.j2me.cdc.platform.jme_sdk.autoinstaller.AutoInstaller.ensureDMStarted(AutoInstaller.java:228)
         at org.netbeans.modules.j2me.cdc.platform.jme_sdk.autoinstaller.AutoInstaller.restored(AutoInstaller.java:65)
         at org.netbeans.core.startup.NbInstaller.loadCode(NbInstaller.java:419)
         at org.netbeans.core.startup.NbInstaller.load(NbInstaller.java:340)
         at org.netbeans.ModuleManager.enable(ModuleManager.java:888)
         at org.netbeans.core.startup.ModuleList.installNew(ModuleList.java:428)
         at org.netbeans.core.startup.ModuleList.trigger(ModuleList.java:364)
         at org.netbeans.core.startup.ModuleSystem.restore(ModuleSystem.java:276)
         at org.netbeans.core.startup.Main.getModuleSystem(Main.java:163)
         at org.netbeans.core.startup.Main.start(Main.java:315)
         at org.netbeans.core.startup.TopThreadGroup.run(TopThreadGroup.java:110)
    [catch] at java.lang.Thread.run(Thread.java:619)
    When I try to start the SDK itself, I also get "Cannot find java.exe in specified jdkhome. Neither E:\java\jdk1.6.0_10\jre\bin\java.exe or E:\java\jdk11.6.0.0_10\bin\java.exe exists. Do you want to try to use default version?". This also happens with I try starting Netbeans as well.
    When I say No, it appears to not start at all. When I say Yes, it appears to try to start but I continually get errors as listed above for the Java ME Device Manager startup error.
    After reinstalling the _10 version, things started to work again, so I suspect this is due to my removal of the an older version of the JDK.
    How is the proper way to "update" without causing similar errors? Are the environment variable JAVA_HOME, JAVA2_HOME, or some other variable used to specify the JDK/JRE in use? I would rather not be forced to change my startup each time to specify a -jdkhome related parameter.
    Should I install the new version, find install the "Java Platform" in the SDK/Netbeans, set it as
    Also...
    How do you set the default version from within the SDK/Netbeans?
    And is there a way to prevent the Device Manager from starting?
    Eric

    You can try this link to see if it solves your problem.
    [http://java.lillegutt.com/?p=3]
    Cheers,

  • After updating to Windows 8.1 the Webcam in my Inspiron is gone and Imaging devices missing in Device Manager

    my webcam in my Dell Inspiron 3521 was working fine with Windows 8.  After updating to Windows 8.1 the Webcam in my computer is gone and the 'Imaging devices' is  missing in the Device Manager.  how can I get the Webcam back? 
    thank you very much.

    I don't see anything specific to your webcam issue but there are a number of Windows 8.1 related drivers listed on the Support site.
    http://www.dell.com/support/home/us/en/04/product-support/product/inspiron-15-3521/drivers
    The Dell Update utility will recommend drivers that are needed specific to your model.
    http://www.dell.com/support/home/us/en/04/Drivers/DriversDetails?driverId=860YD&fileId=3374847033&osCode=WB64A&productCode=inspiron-15-3521&languageCode=EN&categoryId=AP
    Good luck!
    bill
    Regards, Bill Moore @BMooreAtDell

  • I have three iPhone 4 models purchased in late 2010 that all share the same iTunes account (apps, music, etc), but I can only update the software on one of the three iPhones. What is the best solution to manage these devices for software updates, apps?

    I have three iPhone 4 models purchased in late 2010 (for my family) that all share the same iTunes account for access to apps and music, but each phone/user still has his/her custom contact list, email accts, and select lists of apps and music from the one iTunes acct library.  The problem is I can only update the software on one of the three iPhones – the primary phone I used to setup the iTunes acct. What is the best solution to manage these devices for software updates, apps? This is probably a common problem with families wanting to share apps and music without realizing the issues created by this approach. As it stands today... the first (primary) iPhone associated with the iTune acct has been updated with the latest software version 5.1.1 and sync'd up with all the apps, music, etc from the one iTune acct, while the other two iPhones are still running on the original software version 4.0.2 and are experiencing problems now. I was advised by AT&T back in January that it would be necessary to setup separate iTunes accts for the second and third iPhones in order to receive system updates. The problem would be how to keep all the apps, etc from being deleted off the second and third phones that were originally loaded from the one iTunes acct. Since this AT&T advice was prior to iCloud coming out, would iCloud be a better solution or at least part of the solution? I really don't yet understand how iCloud works. Hopefully, someone out there can help me??  Please?

    I have three iPhone 4 models purchased in late 2010 (for my family) that all share the same iTunes account for access to apps and music, but each phone/user still has his/her custom contact list, email accts, and select lists of apps and music from the one iTunes acct library.  The problem is I can only update the software on one of the three iPhones – the primary phone I used to setup the iTunes acct. What is the best solution to manage these devices for software updates, apps? This is probably a common problem with families wanting to share apps and music without realizing the issues created by this approach. As it stands today... the first (primary) iPhone associated with the iTune acct has been updated with the latest software version 5.1.1 and sync'd up with all the apps, music, etc from the one iTune acct, while the other two iPhones are still running on the original software version 4.0.2 and are experiencing problems now. I was advised by AT&T back in January that it would be necessary to setup separate iTunes accts for the second and third iPhones in order to receive system updates. The problem would be how to keep all the apps, etc from being deleted off the second and third phones that were originally loaded from the one iTunes acct. Since this AT&T advice was prior to iCloud coming out, would iCloud be a better solution or at least part of the solution? I really don't yet understand how iCloud works. Hopefully, someone out there can help me??  Please?

  • My updates are failing.  Adobe application manager may be damaged.  I have downloaded and installed a new copy and the problem persists.   Please help.

    I am trying to update Photoshop CS6 in order to read my camera's RAW files.  It is a camera that is supported by Adobe Photoshop CS6.  However, when I try to get the Adobe Application Manager to update the software, it fails to do so.  (The spinning wheel tells me it is checking for updates and then quits, saying that "Update Failed - Updates could not be applied.  Adobe Application Manager may be damaged.  Download and install a new copy of Adobe Application Manager.")
    I have tried to reinstall the Adobe Application Manager 8.0, which gives me the following error message "We've encountered the following issues.  Installer failed to initialize.  Please download Adobe Support Advisor to detect the problem."  However, when I go to the link provided to download the Adobe Support Advisor, this piece of software NO LONGER EXISTS. "
    The Adobe Support Advisor has been discontinued
    The Adobe Support Advisor tool was used to analyze installer log and system information associated with installation errors. The tool has been replaced with improved installation support mechanisms. Please visit Adobe Support section for Knowledge base articles around Installation."
    So, I have gone to the forums and took the recommended step to update my software manually - getting the update Photoshop_CS6_13_0_6upd-2.dmg.  However, this update also fails stating that my Adobe Application Manager may be damages.  Download and install a new copy of Adobe Application Manager.  Which puts me right back where I started.  
    I have also taken the step of completely reinstalling Photoshop CS6.  This did not solve the problems outlined above.  
    Please help!

    reset your preferences:
    dreamweaver:  http://helpx.adobe.com/dreamweaver/kb/restore-preferences-dreamweaver-cs4-cs5.html
    flash:  http://helpx.adobe.com/flash/kb/re-create-preferences-flash-professional.html
    indesign:  https://forums.adobe.com/thread/526990
    lightroom:  http://www.lightroomforums.net/showthread.php?14226-Resetting-%28or-Trashing-%29-the-Light room-Preferences-file
    photoshop:  https://forums.adobe.com/thread/375776
    if that fails, uninstall ps, clean (Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6) and reinstall.  then use the manual updates.

  • BB 8130 Error while Updating OS in Device Manager

    OK, Hi everyone say hey to the new guy, now help him out! I was just trying to update my BB 8130 with the Alltel 4.5 OS and Device Manager 4.7, But while the program was in the stage of "Reconnecting to JVM," it closed the updater and said Error: Could not reconnect to Blackberry. MY PHONE WON'T DO ANYTHING!!! It's stuck on a screen with a window with some shapes in it and a huge crossed-circle over it. It won't leave this page! When I try reconnecting to the computer, Device Manager doesn't recognize it as a phone. It does nothing. Has anyone else had this issue? I am using XP 32-bit. If anyone can help me out, please do so. Thanks!

    Hi and welcome to the forums!
    Try this procedure, you will have to join the other forum to get the utility.
    Thanks,
    Bifocals,
    http://blackberryfaq.com/index.php/How_do_I_wipe_the_BlackBerry_using_Jl_Cmder%3F
    Click Accept as Solution for posts that have solved your issue(s)!
    Be sure to click Like! for those who have helped you.
    Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

  • I am getting the following error messages Extension Manager 6.0.8 Update Installation failed. Error Code: U44M1P7

    When I tried to install latest updates to Lightroom I am getting the following error messaage:
    Extension Manager 6.0.8 Update
    Installation failed. Error Code: U44M1P7
    Ca you explain what I need to do to resolve this?

    Jjmarmour please see Installation failed. Error U44M1P7 | Updates - http://helpx.adobe.com/creative-suite/kb/error-u44m1p7-installing-updates-ccm.html for information on how to resolve the U44M1P7 error.

  • Photoshop CS6 could not update successfully.  Error codes Adobe Photoshop 13.0.1.3 Installation failed. Error Code: U44M1P7  Extension Manager 6.0.8 Update Installation failed. Error Code: U44M1P7  Please help me figure out how to call customer service. 

    Photoshop CS6 could not update successfully.  Error codes Adobe Photoshop 13.0.1.3 Installation failed. Error Code: U44M1P7  Extension Manager 6.0.8 Update Installation failed. Error Code: U44M1P7  Please help me figure out how to call customer service.  I would prefer to talk to someone directly.

    Are you using any disk cleaner or optimization tools like CleanMymac or Mackeeper?
    Regards,
    Ashutosh

  • HP Device manager for C6100 series on macbook freezes after 1.1.1 update

    Okay, I had this same issue on my Powerbook after the hp 1.1.1 update for my C6100 Photosmart printer/scanner and I Googled the answer but didn't save it - I now have the same issue on my MacBook Pro. When I try to scan via the HP Device Manager I get an error "the program may be unstable, it is recommended that the program be closed and restarted"
    I know the resolution is to remove the 1.1.1 update but I can't remember how the heck to do this... anyone? Help! I know it's super easy and I'm stuck.
    Thanks all!

    That doesn't work. I ended up just using the uninstaller and removing the entire thing and then by the CD I reinstalled it again so it doesn't have the update 1.1.1. Of course it asks if I want to update when the updater runs I deselect it. Now I remember there is a simple way to make it skip this update every time too so I don't inadvertently install it again but I don't remember that simple task either.

Maybe you are looking for