Hp device manager
As per my understanding to add a printer after it is connected first I have to install the hp plugin using the hp device manager. Hp setup later asks for the file or it will download a .run file from internet.
But I dont see in my system where it gets saved. Because I have another computer which is not connected to internet. SO that I can use this file and install the hp plugin.
Or can any one suggest where can I download the hp1008 hp plugin .run file.
First time I tried in the following manner for hp laserjet P1008
I installed cups hplip and foomatic etc as per the wiki
Added user to lp group. Then connected the printer to usb and restarted and printer is shown in lsusb
Then I opened cups local and went to administrator and did find new printers.
It showed my printer "HP_LaserJet_1020_USB_JL09AMB_HPLIP"
Then I did next and it showed a list of all printers. But it automatically selected hp laserjet P1008 hplip related ppd.
Then next is it says printer installed. Then when I do test page it shows status of printing as stopped and some error with the printer.
So some one suggested to install the hp-plugin for 1008 from hpsetup.
After hpsetup I deleted the previousy added printer in cups and again added the printer as above. Then the test page started.
So I felt that first use hp-setup and install the printer related plugin which is downloaded from hp website. That download is not saved in file system I think .
Then using cups add the printer. then it looks it works.
Similar Messages
-
Ipod 5th Generation 80 GB / Device Manager / Driver not Installed / Code 28
Well, where do I begin! Got my 1st Ipod 2 days ago & still unable to use it! I have installed & uninstalled the itunes 7 software numerous times. On phone w/ Apple for 1 hour...followed by online chat help w/ Dell.
I've tryed 4 different USB ports on my computer. The device Manager shows the Ipod w/ a ? and a ! in yellow. The add new hardware tells me, "Drivers for this device are not installed. Code 28." My computer reconizes that the ipod is plugged in, but will not do anything. There is no communication between the 2. Keeps telling me to insert cd for software for ipod.
Help! Does seem that other people are having similar issues. I think a software cd should of been provided w/ the ipod....not sure if that would of corrected my problem.Hi,
Click Start > All Programs > Accessories > Run. the Run dialog appears,
Type %temp%, then click OK.
locate and enter into the HP Installation temporary folder, start with the 7Z characters.
If you can see several folders starting with 7Z, locate the latest one.
Click the Address bar area, then the full address path will appear,
Copy the full path location by clicking CTRL + P while the path is selected.
Enter the Device Manager.
Right click the printer name with the error mark, then click Update Driver.
Select the second option to manually locate the driver.
Paste the temporary folder path and click Next (Keep Include Sub Fulders marked), the driver should be updated.
Please let me know of any change,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution -
IPod is not recognized by Windows, iTunes or Device Manager
I'm running Windows XP with external hard drive. When hard drive is connected, iPod will not sync and I get message stating "USB Device Not Recognized. One of the USB devices had malfunctioned..."
When disconnect, iPod will sync. However, iTunes is on external drive; therefore musc is not syncing onto iPod. I've attempted the 5 R's as well as searching for iPod in Device Mananger. When iPod is conncected, it is listed in Devce Manage as "Unknown Device." Articles to solve recommend relettering device, bu how do I get it to be recognized by Device Manager?I HAVE A SIMILAR PROBLEM TO THAT I JUST BOUGHT MY 30GB IPOD VIDEO ABOUT 4 HOURS AGO, SINCE THEN I HAVE BEEN REALLY STRUGGLING TO INSTALL IT. A SOON AS I GOT IT, I DID EXACTLY WHAT IT SAID, I WENT TO WWW.APPLE.COM/IPOD/START AND DOWNLOADED THE NEWEST ITUNES VERSION. THEN I PLUGGED IN MY IPOD TO MY COMPUTER, AND ALL THAT HAPPENS IS A LITTLE BUBBLE OPENS UP AND SAYS "FOUND NEW HARDWARE" WHEN I CLICK THAT, IT OPENS UP, AND I CLICK "INSTALL THE SOFTWARE AUTOMATICALLY" WHERE IT SAYS IT, THEN I CLICK NEXT AND WAIT. AFTER, IT SAYS "THE HARDWARE WAS NOT INSTALLED BECAUSE THE WIZARD CANNOT FIND THE NECESARRY SOFTWARE".AFTER I WENT TO WWW.APPLE.COM TO FIND OUT WHAT THE PROBLEM WAS, I'VE LOOKED THROUGH AND READ EVERY ARTICLE THAT CAN PERTAIN TO MY SITUTAION, BUT NONE HAVE HELPED ME I AM DISPLEASED TO SAY, THE LAST ARTICLE I READ WAS THIS ONE:
http://docs.info.apple.com/article.html?artnum=305136
BUT EVEN THAT DOES NOT HELP ME BECAUSE WHEN I GET TO STEP 8 WHICH SAYS "Locate the iPod in this list. In some cases one of the entries will have "iPod" in its name. If no such entries are present, the iPod is most likely represented by "USB Mass Storage Device." I LOOK FOR WHERE IT SAYS "IPOD" OR "USB MASS STORAGE DEVICE" UNDER "UNIVERSAL SERIAL BUS CONTROLLERS, AND CANNOT FIND EITHER THING..I HAVE RESTARTED MY COMPUTER A NUMBER OF TIMES, I HAVE EVEN UNISTALLED ITUNES THEN REINSTALLED IT I HAVE STRETCHED EVERY OPTION AND NOTHING HAS WORKED..CAN SOME ONE PLEASE HELP ME??..I HAVE BEEN TRYING TO SOLVE THIS PROBLEM FOR 4 HOURS STRAIGHT STOPPING ONLY TO GO TO THE BATHROOM AND GRAB A BITE TO EAT.. -
[solved] Digital Camera not recognized in device-manager
My digital camera "Canon Powershot SX120 is" is not recognized by the devicemanager. I have read Digital Cameras.
$ groups
wheel storage users printadmin
The "camera"-Group isn't needed anymore and this group doesn't exist on my system.
The Powershot SX 120 has a MTP/PTP connection mode (as the manual says). But:
# mtp-detect
Unable to open ~/.mtpz-data for reading, MTPZ disabled.libmtp version: 1.1.6
Listing raw device(s)
No raw devices found.
gphoto succeed:
$ gphoto2 --auto-detect
Modell Port
Canon PowerShot SX120 IS usb:002,019
A gphoto --summary could be found here
There is no udev-rule for this camera. If i create one while copying a rule from a similar camera from /etc/udev/rules.d/69-libmtp.rules, and store it into /etc/udev/rules.d/69-canon.rules, the device-manager shows up. My udev-rule:
# Canon PowerShot SX120AX (PTP/MTP mode)
ATTR{idVendor}=="04a9", ATTR{idProduct}=="31e0", SYMLINK+="libmtp-%k", ENV{ID_MTP_DEVICE}="1", ENV{ID_MEDIA_PLAYER}="1"
The device-manager shows me only the option to open with a file-manager. Doing so will result in an error:
The file or folder udi=/org/kde/solid/udev/sys/devices/pci0000:00/0000:00:02.1/usb2/2-8/ do not exist.
With my udev-rule:
solid-hardware listen
Object::connect: No such signal org::freedesktop::UPower::DeviceAdded(QDBusObjectPath)
Object::connect: No such signal org::freedesktop::UPower::DeviceRemoved(QDBusObjectPath)
Listening to add/remove events:
Device Added:
udi = '/org/kde/solid/udev/sys/devices/pci0000:00/0000:00:02.1/usb2/2-8'
Without the active udev-rule, "solid-hardware listen" produces nothing, but
udevadm monitor
monitor will print the received events for:
UDEV - the event which udev sends out after rule processing
KERNEL - the kernel uevent
KERNEL[5077.662572] add /devices/pci0000:00/0000:00:02.1/usb2/2-8 (usb)
KERNEL[5077.662655] add /devices/pci0000:00/0000:00:02.1/usb2/2-8/2-8:1.0 (usb)
UDEV [5077.681178] add /devices/pci0000:00/0000:00:02.1/usb2/2-8 (usb)
UDEV [5077.693035] add /devices/pci0000:00/0000:00:02.1/usb2/2-8/2-8:1.0 (usb)
Don't know what to do ... is a udev-rule necessary to bring up the message from device-manger? Or is the Camera not recognized as a mtp-device (the Camera has no such settings)? How could i figure it out?
With Digikam i could import Fotos, but i would do so with gwenview. I've tried to check it out with gwenview_importer:
$ gwenview_importer --udi '/org/kde/solid/udev/sys/devices/pci0000:00/0000:00:02.1/usb2/2-8'
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
gwenview_importer: Missing required source folder argument.
(don't care about the different udi, i took this example from a former try) but i don't know, how to find out where the "source folder" is ...
Last edited by quiqueck (2014-02-26 20:10:25)I have solved this by making an extra udev-rule for my camera. See my adventure on forum.kde.org for details
-
my webcam in my Dell Inspiron 3521 was working fine with Windows 8. After updating to Windows 8.1 the Webcam in my computer is gone and the 'Imaging devices' is missing in the Device Manager. how can I get the Webcam back?
thank you very much.I don't see anything specific to your webcam issue but there are a number of Windows 8.1 related drivers listed on the Support site.
http://www.dell.com/support/home/us/en/04/product-support/product/inspiron-15-3521/drivers
The Dell Update utility will recommend drivers that are needed specific to your model.
http://www.dell.com/support/home/us/en/04/Drivers/DriversDetails?driverId=860YD&fileId=3374847033&osCode=WB64A&productCode=inspiron-15-3521&languageCode=EN&categoryId=AP
Good luck!
bill
Regards, Bill Moore @BMooreAtDell -
Problem With Device Management in Campus Manager
hi , there are 474 devices in common services device managemant which I grouped them to userdefinedgroups .
then I applied the auto allocation mode in Campus manager to apply all managed devices , when I click apply it mentioned that it would add 474 devices . but after data collection was finished just 461 devices was added and the rest of those are now in the Include devices under device management !!!
why does it hapened ?
thank you .Hi Marian,
Could you please provide me with details on how to setup test workbench reporting. I have a BW system external to Solution Manager. I have setup the RFC conncections and all is okay. I have also setup the source system in BW and installed the web templates. However, when activating the content via solman_workcenter - test management - settings, I get the following error:
Content Activation Log
Log for Setup ID 20100819135323
20100819 135323[ERROR ]: Current Status: ERROR
20100819 135323[INFO ]: Job CCMS_BI_SETUP successfully scheduled
20100819 135323[ERROR ]: Incorrect system setting: standard transport is active
20100819 135323[ERROR ]: Change system settings or set user parameters RSOISCONTENTSYSTEM and RSOSTANDARDCTOACTIVE
20100819 135323[ERROR ]: Prerequisites check failed
20100819 135323[ERROR ]: Jobname/count: CCMS_BI_SETUP 13532300
I am sure there is something wrong in my setup but I cannot figure out what it is. A step by step help on how to do it will be greatly appreciated.
Regards,
Rue. -
[In Windows 8.1] When I access the Device Manager, it does not list my wireless adapter as one of the devices available. I have attempted to manually install the drivers from the BootCamp 5.1.5621 file.
I've spent several hours attempting to remedy this but have only found threads explaining how to solve the problem if the 802 adapter is already listed in the device manager.I recently had some BT issue's in Win8 so I wrote a topic about this subject. Maybe you need to replace the Broadcom drivers as well.
Please have a look here:
Apple Wireless Keyboard Windows 8 problem
Good luck.
Marcel -
Unable to open 2 9509 switches at the same time in Cisco Device Manager
Dear Friends,
There are a pair of MDS 9509 switches whose management addresses are 172.16.2.197 and 172.16.2.198.
When we try to manage these Devices through Cisco device manager, the first device opens up without any problem, but when the second 9509 is opened in Cisco Device Manager, it fails giving the following error message:
"Open udp transport failed: Address already in use: Cannot bind"
To get around this issue, if we close the first interface to the 9509 switch, then we are able to open up the second 9509 in Device Manager.
We have this problem only in Cisco device manager. If we open one switch in Cisco device manager and the other switch in Cisco Fabric Manager, it works.
Also, we can telnet to both the devices successfully at a time.
The device manager in use is 4.1.
Please find enclosed the sh version outputs for your kind reference.
Can you please help me understand the cause of this issue?
Thanks a lot
GautamIs it always the same MDS that fails to open, or can you open either one first, and then the second one poses the problem (no matter which one is second)?
Can you try from a second work station and see if you can open DM to both switched at the same time? I suspect the address it is complaining about is the local workstation IP, not the MDS IP.
If you open the FM map, then you click on the MDS ICONs, can you open DM to both MDS?
- Mike -
Questions on mobile device management
Hi All,
I'm not sure where to post this question since I couldn't find a forum specific to Afaria, so thought someone here might be able to help.
1. Afaria mobile device management solution claims that data and content is backed up and can be deleted if a device is stolen or lost. Can this deletion be done if the mobile is switched off of the SIM card has been removed? What is the mechanism of the data deletion process when the device is either ON/OFF?
2. How does Afaria handle online and offline user authentication? If a mobile app is opened, can Afaria be configured to force the user to enter credentials for authentication? Or should there be a separate login page as a part of the mobile app? (The user's credentials are needed to find his role from LDAP and the rest of the app to work properly, which is y the question).
Thanks & Regards,
VaishnaviThis forum is fine for Afaria discussions and questions, no worries.
1. If mobile device is switched off or not network connected then Afaria is not able to do anything with that device. The content though would be secured, encrypted etc. so that there should be no risk as long as the device is switched off. The "kill device" command that can be sent from Afaria will work if device is turned on and connected to a network.
2. Afaria can force quite a lot of things and one of them is regarding the device itself, forcing a password/pin type of unlocking. The mobile app normally has it's own mechanism for authentication, user name and password. That is a SUP function and has little to do with Afaria, I don't believe Afaria can force that part of authentication.
You can get a good overview of the technical part of Afaria here: [Afaria Technical White paper|http://www.sybase.com/files/White_Papers/Afaria-Technical-WP.pdf] -
After upgrading to mountain lion,my HP device manager can't find scanner
I have an HP Photosmart C5550 All-in-One printer scanner.
The HP device manager can't find the scanner. Printer works fine.
I upgraded from Lion to Mountain Lion and this is my problem now.Try the HP Photosmart C5500 series app in /username/Library/Printers/, HP Utility->Devices in /Library/Printers/hp/Utilities/, Image Capture, or Preview->File->Import from scanner option.
-
I have an IPod Touch that has been formatted for a Mac. All instructions I have been able to find use ITunes or Device Manager to reformat the device for Windows. This cannot be done if Windows doesn't recognize the device. Is there another way to set the device back to the factory settings directly on the device without using ITunes?
Ipod touch is not formatted one way or the other at all.
Just sync it to the new computer using itunes.
iPod touch User Guide (For iOS 5.1 Software) -
The Ultimate Guide to Resolving Profile and Device Manager Issues
The following article also applies to issues after re-setting the severs' hostname. It also applies to situations where re-setting the Code Signing Certifictateas described by Apple has not resolved the issue.
Hello,
I have been plagued with Profile Manager and Device Manager issues since day one.
I would like to share my experience and to suggest a way how to resolve issues such as device cannot be enrolled or Code Signing Certificate not accepted.
I shall try to be as brief as possible, just giving an overview of the steps that resolved my issues. The individual steps have been described elsewhere in this forum. For users who have purchased commercial SSL certs the following may not apply.
In my view many of these issues are caused by missing or faulty certificates. So let us first touch on the very complex matter of certificates.
Certificates come in many flavours such as CA (Certificate Authority), Code Signing Certificate, S/MIME and Server Identification.
(Mountain?) Lion Server creates a so-called Intermediate CA certificate (IntermediateCA_hostname_1") and Server Identification Certificate ("hostname") when it installs first. This is critical for the operation of many server functionalities, including Open Direcory. These certs together with the private/public keys can be found in your Keychain. Profile and Device Manager may need a Code Signing Certificate.
The most straightforward way to resolve the Profile Manaher issues is in my view to reset the server created certicates.
The bad news is that this procedure involves quite a few steps and at least 2 hours of your precious time because it means creating a fresh Direcory Master.
I hope that I have not forgotten to mention an important step. Readers' comments and addenda are welcome.
I shall outline a sensible strategy:
1. Clone your dysfunctional server to an external harddrive (SuperDuper does a reliable job)
2. Start the server fom the clone and shut down ALL services.
3. It may be sensible to set up a root user access.
4. Back-up all user data such as addess book, calendar and other data that you *may* need to set up your server.
5. Open Workgroup Manager and export all user and workgroup accounts to the drive that you using to re-build your server (it may cause problems if you back-up to an external drive).
6. Just in case you may also want to back-up the Profile Manager database and erase user profiles:
In Terminal (this applies to Lion Server - paths may be diferent in Mountain Lion !)
Backup: sudo pg_dump -U _postgres -c device_management > $HOME/device_management.sql
Erase database:
sudo /usr/share/devicemgr/backend/wipeDB.sh
7. Note your Directory (diradmin) password for later if you want to re-use it.
8. Open Open Server Admin and demote OD Master to Standalone Directory.
9. In Terminal delete the old Certificate Authority
sudo rm -R /var/root/Library/Application\ Support/Certificate\ Authority/
This step is crucial because else re-building you OD Master will fail.
9. Go back to Server Admin and promote the Standalone Directory to OD Master. You may want to use the same hostname.
10. When the OD Master is ready click on Overview and check that the LDAP and Keberos Realm reflect your server's hostname.
11. Go back to Workgroup Manager and re-import users and groups.
NOTE: passwords are not being exported. I do not know how to salvage user passwords. (Maybe passwords can be recovered by re-mporting an OD archive - comments welcome! ).
12. Go to Server App and reset passwords and (not to forget) user homefolder locations, in particular if you want to login from a network account!
If the home directory has not been defined you cannot login from a network account.
13. You may now want to restore Profile Manager user profiles in Terminal. Issue the following commands:
sudo serveradmin stop devicemgr
sudo serveradmin start postgres
sudo psql -U _postgres -d device_management -f $HOME/device_management.sql
sudo serveradmin start devicemgr
14. You can now switch back on your services, including Profile Manager.
In Profile Manager you may have to configure Device Management. This creates a correct Code Signng Certicate.
15. Check the certificate settings in Server App -> Hadware -> Settings-> SSL Certificates.
16. Check that Apple Push Notifications are set.(you easily check if they are working later)
17. You may want to re-boot OS Server from the clone now.
18. After re-boot open Server App and check that your server is running well.
19. Delete all profiles in System Preferences -> Profiles.
19. Login to Profile Manager. You should have all users and profiles back. In my experience devices have to be re-enrolled before profiles can be pushed and/or devices be enrolled. You may just as well delete the displayed devices now.
20. Grab one of your (portable) Macs that you want to enrol and go to (yourhostname)/mydevices and install the server's trust profile. The profile's name should read "Trust Profile for...) and underneath in green font "Verified".
21. Re-enrol that device. At this stage keep your finger's crossed and take a deep breath.
22. If the device has been successfully enrolled you may at last want to test if pushing profiles really works. Login to Profile Manager as admin, select the newly enrolled device. Check that Automatic Push is enabled (-> Profile -> General). Create a harmless management profile such as defining the dock's position on the target machine. (Do not forget to click SAVE at the end - this is easily missed here). If all is well Profile Manager will display an active task (sending) and the dock's position on the target will have changed in a few seconds if you are on a LAN (Note: If sending seems to take forever: check on the server machine and/or on your router that the proper ports are open and that incoming data is not intercepted by Little Snitch or similar software).
Note: if you intend to enrol an Apple iPhone you may first need to install the proper Apple Configuration software.
Now enjoy Profile and Device Manager !
Regards,
TwistanHI
1. In Action profiles, logon to system and recheck correcion are available in action definition as well in condition configuration and the schedule condition is also maintained. but the display is not coming(i.e in the worklist this action is not getting displayed).
You can check the schedule condition for the action and match the status values...or try recreating the action with schedule condition again....for customer specific ....copy the standard aciton with ur zname and make a schedule condition and check the same.
2, In suppport team of incident when i give individual processor it throwing a warning that u r not the processor. but when i give org unit it is working perfectly. Could anyone guide on this.
You need to have the empolyee role for BP ..goto BP and got here dropdown for ur bp and choose role Employee and then enter ur userid
also make sure that u have the message processing role
Hope it clarifies ur doubt and resolve ur prob
Regards
Prakhar -
IPod charges, but doesn't show up as a drive, nor does it show up in iTunes or the Device Manager.
I was given in iPod Touch 8GB (used) for my birthday on the 8th, but I still haven't been able to get any use out of it it. When I plug it into the laptop it charges, but it isn't recognized as a drive, doesn't show up in the Device Manager, and is not recognized by iTunes. I've tried plugging it into a different computer, using a different cord, re-installing drivers, re-installing iTunes - everything! It's also stuck in recovery mode, and I can't do anything to get it out. I've tried restarting it, but it goes right back into recovery mode, telling me to connect it to iTunes. It's driving me batty! If anyone can tell me how to fix this, it would be greatly appreciated. Thanks! c:
See if placing the iPod in DFU mode will allow a restore.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
If not then it is time for an appointment at the Genius Bar of an Apple store. -
Qosmio X770: 4 nVidia HD audio devices in device manager
So i have a few questions...
In my device manager i have [this (screenshot)|http://i.imgur.com/NfH5E7p.jpg].
So i have (!) 4 nvidia hd audio and 1 hd realtek audio.
I usually update my nvidia video driver and nvidia hd audio driver is updated every time with it.
But not long ago i decided to find any other updates to my drivers, cause bloody toshiba (we call it that way in Russia) is too lazy to support their laptops. And [found this:(realtek hd R2.70 codec driver )|http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=24&PFid=24&Level= 4&Conn=3&DownTypeID=3&GetDown=false].
Installed it, everything is working fine so far. It is for realtek alc269 (and also many other devices, but for us only alc269 matters) which is the real name of realtek hd audio device in x770 laptops (i checked in program aida64, previously known as everest).
So now i have [this (screenshot)|http://i.imgur.com/6HM5mLj.jpg]: version 6.0.1.6662 date 19.06.2012
The previous version that lazy toshiba was glad to provide us with - 6.0.1.6360 [(screenshot)|http://i.imgur.com/dUQiPA0.jpg]
So the questions are:
1. Why i have FOUR nvidia hd audio devices in device manager?
2. How can i make nvidia hd audio my primary audio device? Or maybe they are some kind of virtual devices or smth like that.
3. Do you think the idea of installing driver directly from realtek website was bad? There is a disclaimer on their site: To be sure you obtain the full features/customizations provided in your original audio product, please download the latest drivers from your system/motherboard manufacturer's website.
So i invite everyone to test this audio driver with me :)
And a few more things.
In one topic i found this info: moreover, myself and other users of this forum have overclocked their cards from 657/1300/1200 to 800/900/1600 and are very pleased with the results, so try not to overexaggerate
(it is a quote). So I will be happy if someone gives me link to some kind of manual about overclocking 560m gt from our beloved x770.
Also I found a lot of topics about nvidia drivers with angry customers. I don't remember when i first updated video drivers, but i've never had problems with them. When the situation changed? As far as i can understand in 2011 you could't install nvidia drivers directly from nvidia website.
P.S. sorry for my english, i'm from Russia. Also there is some russian on screenshots, hope it won't make your eyes bleed.At first i want to "thank" moderator about renaming my topic. Original name was: realtek vs nvidia hd audio x770 + update r2.70 question. Where is 2.70 part in the current name? Ok.
Second. To Tonny: I'm not lame user, no need to explain me obvious things).
> {quote:title=Tonny wrote:}{quote}
> > How can i make nvidia hd audio my primary audio device?
> I dont understand why you want to make an device primary?
> What is the purpose for that?
>
> If you want you can set the sound devices as default device in Control Panel -> Sound -> Playback tab
> Click on the device and choose default.
If there is nvidia hd audio device and it's not some kind of virtual device or controller, i want to test it like primary audio device. Simple curiosity. I love flac etc.,
So I always try to improve sound. And alc269 we have in x770 is also installed in my ANCIENT asus eee pc, so it's very depressing. Also your advice about control panel - sound is not working, i think you know why... There's only speaker device working on realtek hd audio.
> {quote:title=Tonny wrote:}{quote}
> You can use the driver from Realtek since the sound chip is from Realtek.
Yep, of course, but it's my 5th laptop and also i have 2 netbooks (i'm speaking only about portative devices, not pc). I tried to update drivers manually numerous times on my previous devices, and I learned a lesson, that if you install new driver (not from you laptop/whatever support page, but directly from device manufacter's website ) and even if you are absolutely sure that driver is compatible with you device there can be problems. For example, as i've already said realtek alc269 is installed in my qosmio x770 and in my super old asus eee pc. And driver is the same.
Also realtek driver support page has disclaimer: To be sure you obtain the full features/customizations provided in your original audio product, please download the latest drivers from your system/motherboard manufacturer's website. (already was in op-post).
So I only tried to hear from those who has already installed r2.70 realtek update or maybe tested it some way. But the moderator made it impossible renaming the topic. -
PCI bus and memory ranges in Device Manager.
Hello,
I looked in device manager on my netbook that has no dedicated graphics card (so no dedicated VRAM) and uses shared system RAM as
it’s video buffer, the following memory ranges have been assigned to the on board card -
If I then change the view in device manager to ‘Resources by type’, Windows shows the following memory ranges to be on the PCI bus
Basically all the memory ranges that have been assigned to the card are shown to be also on the PCI bus. I would understand this with
a dedicated graphics card where data needs to be forwarded onto the PCI bus but I know my netbook is using system memory as the frame buffer which then I assume the card reads from there.
Do you know why these addresses are shown to be on the PCI bus, is it just because the card is a PCI device so it’s easier for Windows
just to display them as if they were on that bus, and anything written to these address will still go into system memory?
I know it’s a bit of a random question but I’ve been trying to find an answer online and can’t seem to find anything.
Any help would be appreciated,
Thanks.Hi,
For your question: Do you know why these addresses are shown to be on the PCI bus, is it just because the card is a PCI device so it’s easier
for Windows just to display them as if they were on that bus, and anything written to these address will still go into system memory?
Yes.
You can check the hardware memory usage via Resource Monitor.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. -
BB 8130 Error while Updating OS in Device Manager
OK, Hi everyone say hey to the new guy, now help him out! I was just trying to update my BB 8130 with the Alltel 4.5 OS and Device Manager 4.7, But while the program was in the stage of "Reconnecting to JVM," it closed the updater and said Error: Could not reconnect to Blackberry. MY PHONE WON'T DO ANYTHING!!! It's stuck on a screen with a window with some shapes in it and a huge crossed-circle over it. It won't leave this page! When I try reconnecting to the computer, Device Manager doesn't recognize it as a phone. It does nothing. Has anyone else had this issue? I am using XP 32-bit. If anyone can help me out, please do so. Thanks!
Hi and welcome to the forums!
Try this procedure, you will have to join the other forum to get the utility.
Thanks,
Bifocals,
http://blackberryfaq.com/index.php/How_do_I_wipe_the_BlackBerry_using_Jl_Cmder%3F
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.
Maybe you are looking for
-
Okay my Apple TV is now asking me to go,to iTunes on my computer and verify my payment information. I only ever redeem iTunes cards and currently have a credit of dollars 26. I want to purchase but cannot because of this. In addition it is taking fo
-
Why can't I download or update apps?
My IPhone 4 will not let me download any new apps or update my current ones. It just says that the apps could not be downloaded at this time. It's been saying that for 3 days now. What's wrong with my phone? I have plenty of memory left.
-
I just returned one of my ipad, can I get some credit back on 2 years contract apple care?
I bought an iPad 2 for my mom, she couldn't use it because the windows keep running away from her. that's why i have to return it
-
I am trying to figure out which new mac I should get. I have a macbook right know but I am in school and working to get a cad technology degree. So my current set up will not cut it for lots of cad work so...I going to get a new one. I thought abou
-
Impossible to enter IBAN code for Serbian vendor
Hi, I want to enter the IBAN code for a vendor from Serbia (Country code: RS), but I get the message BF00016: generation not possible/ The bank details are: IBAN: RS35160053020009138705 BIC: DBDBRSBG Banca Intesa a.d. Beograd Milentija popovica 7b 11