HP Digital Imaging Monitor not seeing Photosmart C6280 on network.

I have put my Photosmart C6280 All-in-One printer on my wired network, and the HP Digital Imaging Monitor does not see the printer any longer. Why?

Hello! Could you please provide more information regarding the issue, such as which operating system you are using? Any additional information will be helpful in resolving your issue. Thanks!
Help the community by marking this post as a solution if it solved your issue!.
If my post helped you in any way, please click the blue KUDOS star under my name! It would mean a great deal.

Similar Messages

What is the HP Digital Imaging Monitor? Does it apply to my OS, Windows 7?

What is the HP Digital Imaging Monitor? Does it apply to my OS, Windows 7? I want to delete the icon from the task tray (tool bar in lower right hand corner of screen) as I never use it.
This question was solved.
View Solution.

Hi,
Digital imaging monitor is a part of the HP software that communicates with your HP printer. This program enables you to read the inklevels, get an out of paper message, scan from the unit to the comuter and so on. Its not neccesary, but it will limit the printers use if you remove it.
Say "Thanks" by clicking the Kudos Star in the post that helped you.
Although I work for HP my posts and replies are my own
Please mark the post that solves your problem as "Accepted Solution"

HP Digital Imaging Monitor Continually Pops Up

It's getting real annoying. The HP Digital Imaging Monitor continually pops up when the wireless c4385 printer is turned on saying "...is connected....is disconnected...is connected...." I've tried changing the power saving settings in Windows/System for the Root USB hub, didn't help. Tried shutting down the HP services in services, no help. Finally I just turned off the printer and then next time my mouse went over the tray icon it finally turned off and disappeared. What's going on here?

I have a similiar problem running ... Vista Home premium ..... I find when it appears that it is my startup menu .... remove from the startup menu.....In my case it wants to install the fax software for my all in on L7500 ..... Removing it from the start will only work if you go and install the fax software and leave the fax printer in your selections .... if you remove the sucker from your installrd printers because you do not want it or need it ... the message reappears ... in my case install the unwanted fax software then remove from startup quick start menu. Hope this helps.
Drypowder

Digital Imaging Monitor fails to open

Using officejet 1315 all-in-one with newer PC and just upgraded to Windows 7 drivers. Performed complete install with current program from the HP site. I can print and scan from the printer dialog box.
However the digital imaging monitor does not start. It appears in the task bar but when I click on launch/show monitor, I get a Window default beep and nothing further happens. I've tried as administrator and ensured permissions are set. Any idea what is preventing the imaging monitor from launching?
Thanks.

Hello Ross-WM,
Welcome to the HP Support Forums! I understand the HP digital imaging monitor does not start, you are still able to print and scan with your PSC 1315.
Did you ever have another HP printer installed on this computer, do you get any error messages on the computer regarding the HP digital imaging monitor?
I would like you to start here and run the HP Print and Scan Doctor- It was designed by HP to provide users with the troubleshooting and problem solving features needed to resolve many common problems experienced with HP print and scan products connected to Windows-based computers.
I will watch for your reply.
Thanks,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

HP Digital Imaging Monitor gone

My HP Digital Imaging Monitor is gone.
I tried reinstalling the printer using the CD but it didnt install the HPDigital Imaging Monitor. How do I reinstall it?

Problem solved. Clicking on the HP Digital Imaging Monitor icon on the task bar previously launched HP Digital Imaging Monitor, which I expected; but it didn't see the 6500. However, clicking the same icon now launches HP Solution Center without overtly updating or loading anything else. HP Solution Center does see the 6500, and I can scan and save in PDF as before. I suspect HP Solution Center was being launched in the past vice HP Digital Imaging Monitor. Before posting the original post, I rebooted my PC several times, checked for Windows and HP updates (there were none), disconnected power from the 6500, and searched specifically for Win 10 version of HP Digital Imaging Monitor all to no avail.

I have a Apple Power Mac G5 Dual 2.3 GHz/6GB RAM/500GB HDD/Superdrive PowerPC Desktop and just bought an Airport Extreme card for it. The card is recognized but will not see the in-house network. This is a pre-intel computer. Do I need an antennae?

I have an Apple Power Mac G5 Dual 2.3 GHz/6GB RAM/500GB HDD/Superdrive PowerPC Desktop and just bought an Airport Extreme card for it. The card is recognized but will not see the in-house network. This is a pre-intel computer. Do I need an additional antennae? If so, which one because my research is confusing me about what is supposed to work with this computer.

Please check out the following Apple Support article to see if your particular Power Mac model supports an external Wi-Fi antenna.

Hi folks, you might know how to fix this: my wifi shows (no hardware installed) then I went to system preferences and deleted the wifi connection, I went also to system information and I can not see wifi listed on Network, how can I create a new wifi ?

Hi folks, you might know how to fix this: my wifi shows (no hardware installed) then I went to system preferences and deleted the wifi connection, I went also to system information and I can not see wifi listed on Network, how can I create a new wifi or simply solve this, I have tryied shotdown pressing keys like P and R, option, etc. Please help me .

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

Why does Image Capture not see my scanners?

I have two multi-function printers - a Canon MF4350d and a HP Officejet J4550 - both connected to my iMac and both printing properly. But when
I open Image Capture it does not see either device. How do I get my scanners functional?

Check this thread: https://discussions.apple.com/thread/5540452?start=0&tstart=0
It would seem there are updated drivers for (some) HP scanners. Doesn't appear to be the case for Canon.

[SOLVED] 2010.05 images do not ´see´ my CDROM after initial boot.

Hi, all.
I was pleased to see the new release images of 2010.05 appearing. I thought i´d try a fresh install, but on my 800mhz machine, the installer could not see the IDE CDROM on the second part of the booting process. I get the Arch menu and then when the installer looks for the CDROM to install Arch, it waits for 30 seconds and then can´t find it. Obviously the CD is readable because it booted initially. I´m guessing that whichever modules are loaded for this bit of the install, it hasn´t loaded the one I need. I can confirm that the latest cut of Debian Squeeze does not have this problem.
Can anyone help?
Thanks,
Chris.
Last edited by chris_debian (2010-05-23 07:51:23)

chris_debian wrote:
Hi, all.
I was pleased to see the new release images of 2010.05 appearing. I thought i´d try a fresh install, but on my 800mhz machine, the installer could not see the IDE CDROM on the second part of the booting process. I get the Arch menu and then when the installer looks for the CDROM to install Arch, it waits for 30 seconds and then can´t find it. Obviously the CD is readable because it booted initially. I´m guessing that whichever modules are loaded for this bit of the install, it hasn´t loaded the one I need. I can confirm that the latest cut of Debian Squeeze does not have this problem.
Can anyone help?
There are a few IDE controllers that are not supported properly yet by the new Linux libata subsystem. In old images, we offered an option to use the old "ide" subsystem instead of libata, support for that has been removed.
However, I doubt that you have one of the very few controllers that still don't work with libata. There is no way to tell unless you provide more details about your hardware - specifically, the mainboard chipset and/or ide controller.
A stupid, yet possible workaround: Write the image to USB too. Boot from the CD and have the USB inserted at the same time. It will start booting from the CD, but mount the file system from the USB afterwards and keep running from there.

IPhone 4 does not see my home WiFi network anymore.

All of a sudden, a few days ago, my wife's iPhone 4 (initially with iOS 6.0.1, now with iOS 6.1) does not see anymore my home WiFi network (created by a Time Capsule), to which it connected automatically.
This has worked flawlessly for years but now the home network (nothing has been changed to its configuration) does not appear in the list of networks seen by the iPhone 4 (mine, iPhone 5 - iOS 6.1 - has no problem at all) and when trying a manual connection I get an error message saying that the network was not found. When I tested, I was a feet away from the Time Capsule.
I have turned the iPhone off and on again twice, to no avail. Just to try something, I created a new WiFi network from my iMac and it was immediately seen by the iPhone 4.
I don't see what could explain these symptoms and what would be the cure.
Help welcome
Thanks
Jacky

No luck. It changed nothing to iPhone behaviour.
Thanks anyway.
Jacky

Mac's can not see or connect to network resources

Our company network is a windows network. We have a couple of remote users with Mac's. The Mac's connect to the network over a VPN. They can connect to the network through the VPN but can not see or connect to any network resources. What settings am I missing?

My problem is that once the VPN is established and I am on the network, none of the shares or resources are visible or able to be connected to.
VPN gets you connected to the network as if you were physically present in the office, but nothing more. Once you have successfully connected via VPN, you have to perform a seperate step to actually login to the server.
Also, some of the "it just works" aspects, like seeing all the things you can login to, before actually logging in to them, is a feature of Bonjour, which doesn't pass over VPN. You'll probably have to use the Finder Menu GO -> Connect to Server, and then type the server's IP address in manually.

Replace old router with WRT110 and now I can not see shared printer on network

Replaced a BEFW11S4 with a WRT110. Now I can not see a shared printer on the network any more. I have not changed anything on the computer that has the printer shared. I can see the internet on all the computers, but not the shared printer. can you help?

First which you need to check, is your printer is working Offline on your computer. In this case you need to Re-map your Printer on your Computers back again. First check if you have any Firewall or Antivurs Installed on your computer try to disable it and check if you are able to print from your computer. If not then try to Remap the printer on your computer.
Go to Network connections window and if you are able to see your computer name on which the printer is installed, then right click on the Printer and click on "Connect" or "MAP" once done you will be able to print from your computer.
Note down the IP address of the Computer on which you have Installed the Printer. (Click on Start - Run - CMD and click Ok, now in the command prompt type "ipconfig" and note down the Ip address, Then go to your other computer and Click on Start - Run - CMD and click Ok and now in the Command prompt type "ping (IP address of your main computer) and hit enter and check if you are getting any replies. If yes, then again click on "Start - Run - type ( \\ip address of your main computer) and click Ok, and now you will be able to see your printer name then right click on it and click on "Connect" or Map, once done, now check if you are able to print from your computer.

IMac can not see Windows machine on network

Hi guys,
Before the AirPort Extreme Update 2007-02, my iMac can connect and share with my Windows machine. However, after installing the AirPort Extreme Update 2007-02, my iMac can not see my Windows machine work-group anymore. How to fix this problem ?
Im using 20' iMac running on Mac OS X 10.4.8
Please help.
DeathNote
iMac 20' inch Mac OS X (10.4.8)

If reinstalling the current update doesn't work, perhaps that is because the update was completed properly, but in the process has messed up configuration settings files and preferences. If you can't find any problems in your settings through System Preferences, then there are probably hidden errors in the .plist files and the way to correct that is by manually wiping out all your network settings files and redoing everything in Network preferences may be a quicker fix than brain surgery. Try deleting these files, then reboot and redo your network settings appropriately..
These are all in the folder /Library/Preferences/SystemConfiguration:
com.apple.airport.preferences.plist
com.apple.nat.plist
NetworkInterfaces.plist
preferences.plist
Note, this will wipe out all network-related settings, and force the OS to rebuild default preference settings files for the built-in network devices. This is sometimes the only thing that will clear up bizarre networking issues, but generally speaking, it works well.. just don't forget to thoroughly note all your proper network settings including wireless network passwords and all that before you perform this house cleaning for reference as a precaution.

Airport not seeing base station or network

Hi all,
I have almost three years of happy and almost trouble-free Airport Express use under my belt, but have encountered a problem I can't fix. Here is the situation:
(1) My Airport does not see my base station, nor the wireless network that I have been using for a long time.
(2) I have (after trying many other things) now done a factory default reset, and the problem still continues.
(3) Interestingly, my wife's computer (a Vaio) CAN see the base station and the wireless network. (Because of the reset I did, it is now a network which has the factory default settings.)
(4) Even more interestingly, my computer CAN see other wireless networks in the area, just not mine. So it seems that only my base station is invisible, and only from my computer!
(5) When I try to log in to the base station manually through Airport Admin Utility, using the address I have always used and the default password, I get the message 'The Airport Admin Utility was unable to read the configuration of the selected base station. An error occurred while reading the base station.'
My setup (which has been working just fine until now) is:
- cable connected to cable modem,
- cable modem connected AE
- two computers on the network: my Powerbook G4, and my wife's Vaio.
I don't consider myself stupid, but I am stumped! So grateful for any help,
Andrew

OK, I seem to have solved the problem. In case anyone else is having a similar problem, here is what I did:
- after browsing through the discussion forums here, I discovered that I could connect to my base station by plugging the ethernet cable from the base station to the computer. I did that, and my computer was finally able to see the base station.
- that was the key. Once I could open the base station in Airport Admin Utility, I played around a little with the settings. The key was to change the 'channel' setting for the network to '1' from 'Automatic'. (I suspect it need not have been '1', but it was moving it off Automatic that seemed to matter.)
That solved the problem. I have no idea why the Automatic setting worked before and not now (something to do with the most recent software upgrade??), but at least it is solved now.
Cheers,
Andrew

Photosmart D7560 blank digital image monitor. Also device services not available.

XP pro and current Flash.

I had the same problem with my Radeon Mobility U1.
The solution is to downgrade the xf86-video-ati driver to the version 6.7.195-3 and it should work flawlessly.
Make sure pacman and/or yaourt don't upgrade this driver inadvertently to this latest, buggy version, until a fix is released.

HP Digital Imaging Monitor not seeing Photosmart C6280 on network.

Similar Messages

Maybe you are looking for