HP Director software won't work since I installed Linksys Wireless Print Server

I have an HP 5510 Office Jet all in one. It comes with bundled software called HP Director that enables scanning, printing, and faxing. The software worked fine while I had the printer connected to my pc with a USB cable.
To give myself flexibility I installed a WPSM54G Linksys Wireless G Printserver. There is no direct connection between my printer and pc anymore.
Printing still works fine. This is being handled by the Linksys software.
The HP Director no longer can find the printer. When I try to scan (for example) using HP Director, I get a message that "an error occurred communicating with the printing device...". It presumably is looking for a direct USB connection, and not finding one.
I can't find a fix on the HP site, but I imagine there must be one. Wireless print servers have been around for quite a while. Is there a download that will solve this problem?
Thanks for your help.

kts0347 wrote:
...My printer interfaces wirelessly through my print server. So, HP Director doesn't see the printer, and fails to run the tasks it is offered for - scanning, photos, faxes....
Exactly my point. These services: scanning, photos and faxes will never work through a print server.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Similar Messages

FaceTime won't work since ios7 installed

FaceTime won't work since iOS 7 got installed. Settings have not changed.

powercycly and keep trying, it will let u get through eventually.

HP Laserjet M1005 MFP won't work with a DLINK DPR-2000 Print server.

I have an HP Laserjet M1005 MFP and am trying to connect it to a DLINK DPR-2000 Print server. After the setup no matter what I do the Laserjet shows up as offline on the print server. The print server recognises it as the correct model it's just always offline aned hence I can get nothing to print.
I have done the latest firmware upgrade on the printer to 20120910.
Any ideas?

Sounds like you are having an issue getting this printer to be recognized fully on the network the print server is set up on. First of all, what all can you tell me about the network environment it is operating on? I would suggest that you try installing the PL6 drivers fro this laserjet after removing the original software and see if that gives you greater control over the machine and its functions :
http://h20000.www2.hp.com/bizsupport/TechSupport/ProductList.jsp?locale=en_US&taskId=135&prodTypeId=...
Let me know how that goes!
I hope you are having a wonderful week, and I hope that the weather where you are located is as beautiful there as it is here!
-Spencer

Fingerprint Software won't work after re-installing

I have uninstalled and re-installed the Fingerprint Reader, version 3.2.0.341 - 4/20/09. When I try to enroll a fingerprint, I get the message from "Fingerprint Enrollment: FPApp.exe - Unable To Locate Component" saying "This application has failed to start because css_banner.dll was not found. Re-installing the application may fix this problem."
I have re-installed, choosing repair, but I still get the error. However, I see css_banner.dll in \Program Files\Lenovo\Client Security Solution.
How can I fix this problem?
Update: I uninstalled version 3.2.0.341 and installed version 3.2.0.116. I have the same problem.
Message Edited by mhedstrom on 05-13-2009 11:38 AM
Solved!
Go to Solution.

I've solved the problem: I had to repair the Client Security Solution.
I noticed that if I tried to open Client Security Solution, I got a similar error about css_banner.dll being missing, followed by a message that CSSLauncher.exe had encountered an error and would close. So I decided that since the css_banner.dll is part of Client Security Solution, it made sense to try to reinstall or repair this application. I downloaded version 8.2 from Drivers and Software and it offered a 'repair' choice. After doing the repair, my Fingerprint Reader application worked. I upgraded the Fingerprint Reader back to the new 4/20/09 3.2.0.341 version and that one seems to be working fine.

My music software has stopped working since I installed ios7,what to do?

When i downloaded the ios7 some of my music has stopped working and come up with a red square and a circle around it, I've tried the suggestions but none of them have worked so far any advice??

Un-sync all your music to remove it from the device, then restart (hold down the home button along with the sleep/wake button until you see the apple, then let go). Now re-sync your music.

HTC DNA Backup Assistant won't work since 1/1/13

HELP! No matter what we've done - hard reset and GOT A BRAND NEW HTC DNA - still backup assistant won't work since 1/1/13. This is NOT anything to do with Facebook.
This all started with that same 1/1/13 error that so many of you got. The tech also had me clear the contact storage. That worked for the error. But since then I don't have contacts. I have talked to at least 7 Verizon techs, one HTC tech, then spent 2.5 hours in the Verizon store today. Ended up with a brand new HTC DNA (mine was only one week old) for free.. and we immediately tried to sync to Backup ASsistant and it still won't work on the new phone. I have 521 contacts stored online in My Verizon Backup Assistant and they will not, no matter what we try, sync to my phone. So frustrated. Anyone else experiencing this?
~Tami

After all my hell- after so many calls and trips to Verizon...as well as getting a new phone..... guess what FINALLY worked:
http://www.droidxforums.com/forum/droid-x-faqs/10144-migrating-contacts-phone-backup-assistant-google-contacts.html
Now I finally see ALL my contacts in "people" when I select my phone icon and people. But now I'm trying to test it out by composing a new text message and all these people aren't showing up there. Does it just take a lot of time!?!? Since I did import 524 contacts from BUA to Google?... will it just take time for these contacts to be available for me to text!?!? HELP.. (again).

Lighting effect won't work since downloading photoshop cc.

lighting effect won't work since downloading photoshop cc.....i use a 1 yr old alienware laptop so am sure the graphics card is plenty robust enough. any ideas?

Hi,
Can you post your info from here: Help> System Info...
regards,
steve

FaceTime won't work since iso 6 updated to Iso 6.

FaceTime won't work since iso6 update. Every time since I have updated to Iso 6, FaceTime will not work. When I try to FaceTime, after about 30 seconds it tells me that the connection is lost! My iPad is wifi only. Help!!!!!

Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime: Set-up, Use, and Troubleshooting Problems
http://tinyurl.com/32drz3d
iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting
http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet
http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Microsoft Office. Epson Scan, Canon software won't work with Lion OS

Microsoft Office. Epson Scan, Canon software won't work with Lion OS

Microsoft office 2008 and later work fine on Lion. Office 2004 is a PowerPC application. PPC apps are no longer supported and Lion does not include Rosetta, which was required to run them on OS X. I imagine the Epson / Canon software you are trying to use is the same. Check with them to see if updates are available.

[THUNDERBIRD] The hiperlinks won't work after new install

The hyperlinks won't work. Firefox was install after my hardrive was formatted since then the links won't work
Firefox is installed on windows XP 32 bit computer
Any ideas!
Martin Freeman

Hi John99
Yes the shortcut works fine both open & closed
Can I ask a question, who is AFAIK ?
Martin

Mac Powerbook with HP 5510 printer. Scanner doesn't work since I installed Lion

Mac Powerbook with Lion. Scanner doesn't work since I installed Lion

What kind of computer is it? Powerbooks can't run Lion. MacBook perhaps?
With Lion, all scanning is performed through Preview. Use Preview.

Compressor 4 doesn't work since I installed Mavericks and I can't export a video normally on FCPX either.

Compressor 4 doesn't work since I installed Mavericks and I can't export a video normally on FCPX either.
Can someone help me?
Thank you!

Got the phone direct from the Apple website, so I assume it was unlocked, and it had been on giffgaff ever since but I don't see why that's a problem?
The carrier was automatically selected as Free and is up to date.
There seemed to be no problem that the SIM was being used in an iPhone 4 and my friends in exactly the same situation (e.g. arriving in France and moving over to the Free network with iPhone 4's) have had zero problems with their 3G network; it just seems to be me.
The Free Mobile Network is included on this list which I guess means that they are Apple-approved? iPhone: Wireless carrier support and features
How do I find out whether or not I would need to manually configure an APN? I'm not even sure I know what that is.

Mac laptop (OS X) trackpad functions don't work since I installed new firefox (but works on Safari)

My trackpad functions such as using 2 fingers to enlarge or decrease size of page do not work since i installed the upgraded firefox on my Mac laptop (OS X - Ver 10.5.8). Installed new version on May 5, 2011. Please help!

You don't have to disable any addons or extentions!!!You guys are not going to believe this I figured out the problem it's really dumb...ok here goes the attachment uploader loads seperate so I got to thinking it's a popup so I went to options content and under block pop ups there is an option exceptions click on that and in the box type firefox.com and hit allow pow its fixed!!!!! :-)

Safari won't open since I installed Firefox.

Safari won't open since I installed Firefox. I keep getting a window that asks me if I want to "Reopen" Safari in a large window that includes error messages, lots of them. I click on "Reopen" and a smaller window opens up with the same option to "Reopen", but Safari just goes back to the large window again; the one with all the error messages.

Quit the application. Force quit if necessary.
Relaunch it by holding down the shift key and clicking its icon in the Dock. From the menu bar, select
Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data
to get rid of any cookies or other data left by the server. Open your Downloads folder and delete anything you don't recognize.

My laptop's internal speakers have stopped working since i connected my wireless beats through bluetooth

My laptop's internal speakers have stopped working since i connected my wireless beats through bluetooth. It's as if it no longer recognises any other audio output, even when i have disconnected the headphones

System Prefernces > Sound > Output
Internal Speakers selected?
"Mute" enabled? Disable it
Reset PRAM. http://support.apple.com/kb/PH4405
If this does not help, try resetting SMC.
Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
Best.

HP Director software won't work since I installed Linksys Wireless Print Server

Similar Messages

Maybe you are looking for