HP DJ1510 AIO Printer-CAN SCAN BUT NOT PRINT

I installed SW & HW as per HP instructions on my comp (WinXP-SP2). Scanning worked but cannot print as the printer driver (which may be missing or faulty on the CD and also in installation files downloaded from HP web site) does not get installed.
HP, India has not come up with any solution to this issue despite my spending many hours with them since 20/9/14.
HP needs to give me a patch for installing printer driver in my OS, which should not be difficult for a company like HP.
I am now frustrated with this HP product & its service. All promises but nofollow up or even phones are not picked up
Who will help me or should I throw away this HP printer.
BM Shah

Hi @bmsprinter,
Welcome to the HP Forums!
I understand that your HP Deskjet 1510 can scan but not print with Windows XP (Service Pack 2). I am happy to help!
According to your printer's specifications, found at this website, HP Deskjet 1510 and Deskjet Ink Advantage 1510 All-in-One Printer Series Product Specifications. This printer is only supported on Windows XP (Service Pack 3) and above. You can select System requirements, and then Windows system requirements, once you have visited that website.
Also, please take a look at this reply, Re: cannot find priner, by my colleague @Jamieson, from your older post, that will help you upgrade your Windows XP Service Pack.
Hope this information is helpful, and have a wonderful day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Similar Messages

Can i find a file that was scanned but not renamed?

can i find a file that was scanned but not renamed?

Hi johnathong,
Did you scan the file directly into Acrobat, but didn't save it? If so, the file is most certainly lost, and would need to be rescanned.
If I misunderstood your question, please let me know.
Best,
Sara

Hp photosmart c4480 using with mac OS X 10.9.4 will scan but not save or send

hp photosmart c4480 using with mac OS X 10.9.4 will scan but not save or send. says: could not be written to check the properties for the file to make sure it is not read only.

Hello @JoScan , and welcome to the HP Forums, I hope you enjoy your experience!
I see you are experiencing scan issues. I would like to help.
I would suggest deleting the printer from your print system, using this document: Uninstalling the Printer Software.
Once you have deleted it, I would suggest verifying and repairing the disk permissions: About Disk Utility's Repair Disk Permissions feature.
I would also suggest running your Apple updates: OS X: Updating OS X and Mac App Store apps
After the updates, I would recommend readding the OS X v10.9 Mavericks: Installing and Using the Printer on a Mac.
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Can send but not retrieve emails using Thunderbird and Windows 8.1

Hi, I am not able to get Thunderbird to retrieve emails on a new laptop.
Last week I purchased a new laptop due to an imminent hard disk failure on my old laptop. I will call them "Old" and "New" laptops. (Old laptop is still working for the moment...)
The Old laptop is nearly 3 years old, and I have been using Thunderbird on it since new without any problems.
I have downloaded and installed Thunderbird on the New laptop, and can not get it to retrieve emails.
As the Old laptop is still working (at the moment), I am able to directly visually compare and check settings on both computers.
THE PROBLEM
Using Thunderbird on the New laptop, I am able to send emails, I can see all my old emails restored from the Old laptop using Mozbackup, but clicking Get Mail on the New laptop does not retrieve new
emails.
When I click Get Mail, the status message in the bottom left corner says "connected to .....<ISP>..." but does not actually get the emails. However, the Old laptop is still able to get emails as it always has.
My ISP is a large Australian telco that I have used for many years and I have not changed anything with my account. The ISP is POP3.
WHAT HAVE I TRIED
I deleted the email account created by restoring from Mozbackup, and attempted using the Thunderbird new account wizard, however Thunderbird did not recognise my ISP and would not create the account - even though it is working perfectly at the same time on the Old laptop.
All Firewalls I can find have been configured to allow Thunderbird, with the same configuration settings on both machines.
How do I know I can send but not Get emails from Thunderbird on the New laptop?
I have sent test emails to myself from the New laptop. Thunderbird sends successfully, I am able to preview the test emails via Mailwasher on the New laptop, and can read, reply, etc, to the emails if I log into my ISP webmail service. However I can NOT get Thunderbird to retrieve and download these emails on the New laptop. If I go to the Old laptop, Thunderbird works perfectly, retrieves and downloads all new emails, including these test emails.
I am now at the point where I do not know what else to try and would appreciate any suggestions.....
I have spent many hours over the last 3 days surfing the net, forums, Mozilla Support, etc, and tried everything suggested, without success. The only thing I have NOT tried is starting windows in Safe mode (as per some suggestions), as it is not a viable long term solution.
OTHER INFO
Computer Details;-
"Old" laptop;-
Windows 7 Home Premium - continuously updated with all Critical and Important updates. 64 bit version.
Antivirus = Bitdefender Total Security (subscription and licensed). Up to date.
MailwasherPro 2012 (subscription and licensed). Up to date.
Thunderbird 24.5.0 working perfectly. Up to date.
"New" laptop;-
Windows 8.1 - up to date with all Critical and Important updates. 64 bit version.
Antivirus = Bitdefender Total Security (subscription and licensed) - downloaded and installed. Up to date.
MailwasherPro 2012 (subscription and licensed) - downloaded and installed. Up to date.
Thunderbird 24.5.0 - downloaded and installed.
Note: I 'downloaded and installed' the Windows 8.1 version of these programs to avoid any potential compatibility problems restoring or copying from a Windows 7 backup version of the programs.
1) New laptop came with pre-installed with McAfee - which has been Uninstalled due to running Bitdefender (Windows searches for 'McAfee' return nothing found suggesting the Uninstall was successful).
2) Thunderbird has been added to both Bitdefender and Windows 8.1 firewalls on the New laptop.
3) Bitdefender and Windows security settings are identical on both laptops - as near as I can determine, I may be missing something - but have checked all settings 3 times by doing a side-by-side visual comparison.
4) Thunderbird settings are also identical and I am using the same email address and ISP that I have been using for many years.
5) I migrated Thunderbird settings, accounts and emails from the Old laptop to the New laptop using Mozbackup, then visually checked and compared all settings in Thunderbird between the two machines.
6) For info, I have used Mailwasher for many years as a simple way to preview and wash mail before running email programs such as Thunderbird - might be overkill, but I have also never had a virus or malware problem, so will keep doing this.
7) I have Uninstalled and re-installed Thunderbird on the New laptop twice, and done the same with Bitdefender once.
8) Any config changes I try on the New laptop, I either restart Thunderbird and / or restart the New laptop, or both.
9) I have not created a Windows 8.1 account and am not using SkyDrive.
10) Only other software I have installed on the New laptop is Google Chrome, Office Home 2013 and iTunes - all are working.
Thanks in advance....

Well there is not much left. If telnet works then the path is clear and there is no hardware firewall blocking ports.
All that is left is software, so try windows safe mode with networking. A very handy way to eliminate software. it also actually disables most anti virus resident features and is preferred here because anti virus/security programs do not always disable or turn off when they say they have.
You might also try the McAfee removal tool. https://community.mcafee.com/thread/52788 I notice the rep said yes to both, they did not say not required.
Finally you could try creating a new profile, and see if it works just to exclude corruption of your existing profile. ( I doubt it but I am at the anything goes point)
Just as an aside, I have never had an email borne nasty and I for many years never even had an email virus scanner. So yes I think your a bit over cautious with mailwasher, if that is what your using it for. Thunderbird does not support scripting languages or flash, or most plugins in the email sandbox. The result is getting a virus from a mail in Thunderbird is really only possible, for all practical purposes, if you open that password protected zip from the young Russian woman and that is what the anti virus should be blocking anyway when the temp file is written.

Using osx 10.7.5 can send but not receive emails. Mail server support rep tried everything

Using iMac with OSX 10.7.5. Can send but not receive emails. No problem with internet account. Server rep tried everything and suggested perhaps a corrupted file in the op syst. Any ideas?

You may have a corrupt preference. Mail - Preferences - Accounts - click the offending account and re-enter all prefereneces. Also you can use Apple's OS X Mail: Troubleshooting sending and receiving email messages located at:
http://support.apple.com/kb/ts3276

I can send but not receive email

Hello All. I know this is a highly posted topic but I cannot find a solution. Any help is greatly appreciated.
Basic Problem- I can send but not receive email.
My ISP is. Yahoo SBC Global
I have a 3rd party email provider: 1and1.com
I have set my preferences according to the specifications of 1and1.com
The error I get is this: The server error encountered was: The attempt to read data from the server "pop.1and.com" failed.
I have a Macbook Pro, running 10.4.9. My account with the 3rd party email provider is new and only has 1 or two emails in the account. I know this because I can log on via the internet and use their website to check the emails in the inbox. So the "email" address is working. I just can't get it to forward to my laptop.
I'm wondering if it has something to do with port 110 being blocked by my ISP. But I really don't think they are blocking that port. Due to the fact that my previous computer was a dell, and I used a similar 3rd party provider to email, the account used port 110 and things worked fine.
Thanks to all.

Ok. I've got it working.
All I did was delete my account information from the preferences. Before, I was editing it.
I entered a completely new POP account and it started working. I have a hard time believing that I entered information incorrectly prior to this because I checked it, rechecked it had a friend check it and it all looked OK. I was copy and pasting information anyway.
However, once I deleted and re- entered a brand new account, it worked fine.
Ernie, thanks for replying to my emails! I appreciate it.
-Fraky

2nd gen A TV I can hear but not see on the TV when trying to stream TV from the iPad2

2nd Gen ATV I can hear but not see on the TV when trying to stream TV from the iPad2

You can look at the ipad under settings, general, about and see if it's 4.3.3.
Or when you connect the ipad to the computer with itunes, it'll tell you on the first tab if you need an update.

2nd gen A TV I can hear but not see when trying to stream from the iPad2, 2nd gen A TV I can hear but not see when trying to stream from the iPad2

2nd gen A TV I can hear but not see on the TV when trying to stream TV from the iPad

What are you trying to stream? Some websites have not enabled the video part of airplay... BBC iplayer for example.

TS3276 Anyone experiencing problems sending mail using TalkTalk - can receive but not send - was ok up until pm 24/08/12 - have recently loaded Mountain Lion patch could this be the problem?

Anyone experiencing problems sending mail using Apple Mail viaTalkTalk - can receive but not send - was ok up until pm 24/08/12 - have recently loaded Mountain Lion patch could this be the problem?

jag157 wrote:
"I managed to solve the problem. Under smtp settings (mail preferences/accounts/edit smtp) I set the outgoing port to 25 (as recommended by Talktalk), no authentication (set to none) and unchecked SSL. I found that until I set the port to 25 and authentication to none I was unable to uncheck SSL. One I had done this I was able to send from my main email and other email adddresses set up under my account."
Superb advice R&W! My email sending block using TalkTalk started 2 months ago using Snow Leopard, continued when I upgraded to 10.8.2, and has been persistent on my wife's new iPad (IOS 6.1). Implementing your wise words has fixed all that, and now enables me to call her on FaceTime — previously only she could call me. Thank you so much; this will save hours of further fruitless searching and phoning.
Please remember that your email is now insecure, if you wish to have a secure connection SSL must be on and port 25 should be avoided.

I think a firewall is interfering with my mail program - I can receive but not send. Please help!

I think Firefox may have installed a firewall that is interfering with my email program - I can receive but not send mail.
== This happened ==
Not sure how often
== Firefox updated with ALOT

Firefox does not install a firewall.

I can't send emails via mail. I can receive but not send. I have set up gmail on mail. Any ideas?

I can't send emails via mail. I can receive but not send. I have set up gmail on mail. Any ideas? No problems with the set up previously to this.

Go to Mail Preferences- Accounts and confirm you are providing Gmail what they require to send and receive mail. And DON'T specify Secure Socket Layer. Some mail accts don't like SSL
Good Luck to you.

SPA112 - Can receive but not make calls

I have just setup an SPA112 at home behind a NAT router and have configured it to a state where I can receive but not make calls.
It registers fine and remains registered.
The Line 1 Status indicates a State of "invalid" and a Tone of "reorder" when the call fails.
I believe I have fiddled with the dial plan sufficient to ensure that the number is not being rejected based on it. My current dial plan is as follows:
     (*xx|000S0|0[2-9][69]xxxxxxxS0|[69]xxxxxxxS0|04xxxxxxxxS0|xxxxxxxxxxxx.)
I have tried with and without an outbound proxy.
I have attempted to debug the issue, enabling full DEBUG level logging and setting "SIP debug option" to "full", but all I get in the log when making a failed call is the following:
     Jul 23 21:35:29 SPA112 kern.warning [17339229.112000] In cordless Driver Codec 18 and str G.729/8000 chan 0
     Jul 23 21:35:29 SPA112 kern.warning [17339229.112000] In cordless Driver Codec 8 and str PCMA/8000 chan 0
     Jul 23 21:35:29 SPA112 kern.warning [17339229.112000] In cordless Driver Codec 0 and str PCMU/8000 chan 0
     Jul 23 21:35:29 SPA112 kern.warning [17339229.112000] In cordless Driver Codec 2 and str G.726/8000 chan 0
     Jul 23 21:35:29 SPA112 kern.warning [17339229.112000] In cordless Driver Codec 100 and str NSE/8000 chan 0
     Jul 23 21:35:29 SPA112 kern.warning [17339229.112000] In cordless Driver Codec 112 and str encaprtp/8000 chan 0
     Jul 23 21:35:29 SPA112 daemon.notice msgswitchd[310]:   MSGSWD RTCP Reqt len 12 Data 2,17,7304,0
     Jul 23 21:35:29 SPA112 kern.warning [17339229.268000]
     Jul 23 21:35:29 SPA112 kern.warning [17339229.268000] #### RTP STOP Flag set in this channel break ####
     Jul 23 21:35:29 SPA112 kern.warning [17339229.272000] ###### sock_sendmsg return 172
I have been unable to find any information about these warnings on th net.
I can successfully make calls with soft phones configured with similar settings behind the same router.
What am I missing?
Any suggestions appreciated, thanks.

Thanks for the post.
To clarify, I have been testing the connection by attempting calls to and from my mobile phone. If I use my mobile to call the number linked to the VOIP account that the SPA112 connects to, the call is received fine and the call works perfectly; I can hear voice at both ends fine.
If I attempt to call the mobile from the phone behind the SPA112 I immediately get a reorder tone as soon as the number is dialed by the SPA112 (i.e. immediately if it matches a number in the dial plan followed by S0 or after the short wait period otherwise etc.)
On the other hand, if I use a softphone (I've tried MicroSIP and Blink) I can place calls to the same mobile through the same VOIP account from the same LAN behind the same NAT as the SPA112, and the calls are received and bidirectional voice comms works just fine.
I'm not sure if I can make calls internal to my LAN with this setup... I only have the one VOIP account, and have no SIP server on the LAN (if that's the right terminology, I'm new to this).
Unfortunately I'm not sure what you're refering to when you talk about ACL and COR. The topology is very straight forward: the SPA112 (along with a couple of PCs) on a LAN behind a NAT router with an internet connection on the other side. The SPA112 is configured as a DMZ, though I don't believed this had any impact for better or worse. In no test for either SPA112 or softphone have I forwarded any ports or changed any router configuration at all (with the exception of the DMZ).
So the question is why the softphone can place calls fine, but the SPA112 can only receive calls. The dial plan is an obvious answer, but I'm fairly certain I've ruled this out.
If someone can tell me how to get more detailed logging out of the SPA112 that would be very useful as well.

E6 (Belle) - Phone can sent but not receive emails

Hello,
I have set up a 2nd mailbox. The first mailbox functions fine. But with the second mailbox I can send, but not receive emails.
Has anybody an idea how to solve that?
Many thanks

One more try. The problem here is that I don't have hands-on experience with Belle. Some backtracking... I assume that
1) Your firmware is up to date.
2) Even manually syncing email doesn't work.
3) You are not seeing any error messages that would help us track down the problem.
I did a web search, and found other Belle users complaining about Gmail support, but mostly that push doesn't work reliably. Manually syncing (or polling every X minutes) still does. It's a long thread, but you might want to read http://discussions.nokia.com/t5/Messaging-Email-Browsing-and/E-mail-doesn-t-sync-automatically-after... in case any comments help you.
If none of that helps, try enabling logging. Within Nokia Email, I have a logging option under Settings -> Global Settings -> Log Output. It writes at least two files to Phone Memory -> Logs. In my case, one file logged only GUI calls...and so was useless, and the other file was always empty. (A third file applied only to Mail For Exchange.) But give it a try and check the files later for references to Gmail or IMAP. Read them from a computer if that helps, and then post any relevant portions here. Also turn off logging when you're finished.
Again, good luck!

I can receive but not send emails with my skynet account - what am I doing wrong ?

I can receive but not send emails with my skynet account - what am I doing wrong ?
I have no problems with my Yahoo account but I can not send emails with my skynet account.
Actually in iPhone :
Outgoing Mail Server > SMTP "relay.skynet.be"
Primary server > Not Configured > Off
Thank you ...

When you set them up, did you set up both the incoming and outgoing email servers separately, and did you enter the correct SMTP server name, and enter your userid and password even though it says "optional"?
Something else to try, if you haven't, is delete the accounts, connect the iPhone to iTunes, on the Info tab check the box to sync mail server settings, then sync. This should duplicate the settings from your computer to your iPhone.

Can generate, but not view CHM R8, Windows 7

Please help.
I can generate but not view or open a CHM file. I'm using R8 and Windows 7.

Hi there
And where exactly is the CHM when you are trying to open it?
Local C drive?
Network?
If it's on a Network, CHM files don't work well on networks and the content is generally blocked.
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7 or 8 within the day - $24.95!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

HP DJ1510 AIO Printer-CAN SCAN BUT NOT PRINT

Similar Messages

Maybe you are looking for