HP drivers not working for Windows 8.1

Hi,
I've been given this laptop and it came pre-installed with Windows 8, touch screen and every driver works fine on Windows 8 till I've upgraded it to Windows 8.1, touch screen no longer works installed the latest driver from the HP website and the own built in HP support assistant and verified it works for 8.1 and it still does not work. Any help would be much appreciated.
Regards.

Hi there @DuskHunter
Welcome to the HP Support Forums!
I understand that you updated to windows 8.1 , and now some devices are not working correctly. You did not specify the exact product you have , but I did find the support page for the closely related 14-n033tx, so you can give the drivers there a try.
HP Pavilion TouchSmart 14-n033tx Ultrabook Drivers
If not, then please post the full product number for your notebook. See the following, if you need help in finding that.
How Do I Find My Model Number or Product Number?
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

Similar Messages

M1522 nf scanner is not working for windows 8.1

till windows 7 scanner & printer is working.
windows 8.1 scanner is not working.
i tried all the softwares in page http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdHome/?sp4ts.oid=3442754&spf_p...
please update your softwares that are not working for windows 8.1

Hello Nani134,
To get your issue more exposure I would suggest posting it in the commercial forums since the HP LaserJet M1522nf is a commercial product. You can do this at HP Enterprise Business Community.
The support page for your product may be helpful in the meantime:
HP Support Center.
I hope this helps!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Activesync not working for Windows Phone with certificate

We have a new Exchange Server 2013 setup and using activesync. We have setup a policy to require simple password and to send an email to provision a device when it connects. Activesync is setup to use self signed certificates, this was
tested first on the Ipad. Certificate installed entered the settings and the device appeared in the quarantined devices list awaiting to be approved. This was also done on the Iphone and worked.
When putting the same certificate on the windows phone device it errored with there is a problem with {as.domain-name.net} and does not appear in quarantined devices screen.
I tested again with another Ipad and an android device and they work without an issue. Tested with a Windows RT device and got the same issue. If I look in the IIS log files I can see the windows device making a connection then when I presume
to be the error 500 at the end of the line.
This is not a user issue as I can use the same user on the various devices. The windows devices just do not want to connect. We have looked at the certificate but if it works for apple and android devices why does it not work for windows?
Is there any additional security settings that need to be turned on or off for windows phones? Is there something specific on the certificate what windows devices need that others ignore?

I did inital think it might be a widows phone issue but there are no other settings for me to use. I have also tested using a windows 8 surface and I get the same issue.
I have raised the event log level on the exchange server to expert and I have seen 2 messages when I try to connect.
I get Event ID 1100: Exhcnage ActiveSync device requests for your uses are being blocked. This problme frequently occurs when HTTP OPTIONS method is not allowed.
I know it is allowed as the test exchange connectivity worked and passed that test.
The other error Event ID 1309 ASP.NET warning. Part of the exception messge is DeviceTypeMissingOrInvalid
I have come across a comment that says for certificates to work you need to use windows intune or SCCM which we don't have. Do we know if this is true?

Java 7 U25 work around does not work for windows 8

I'm working on a java application which uses the statistical software R. This line Process p = Runtime.getRuntime().exec(C:\Program Files\R\R-2.15.1 + "/bin/" + "R CMD BATCH " + "./data/rJava.R"); in the application started throwing an error after the java 7 u25 update, but it was fixed by using the work around setting jdk.lang.Process.allowAmbigousCommands to true. This fix however does not work in windows 8, although the command does not error out with "cannot create process = 2" it just executes the line, but does nothing. But if I typed the command (R CMD BATCH " + "./data/rJava.R) directly into the commandline, it works perfectly. I've tried disabling the work around, and actually using suggested solutions in the release notes (see below), all worked in windows 7, but no success with windows 8. Any suggestions would be great
Process p = new ProcessBuilder("c:\\Program File\\foo.exe").start();
Process p = Runtime.getRuntime().exec(new String[] { "c:\\Program File\\foo.exe" });
Process p = Runtime.getRuntime().exec("\"c:\\Program File\\foo.exe\"");

avancentcisco - Win7 works fine with SSL VPN. But since we all were migrating to Win8, this was of no use to us. So we ditched SSL VPN all together.
IPSec VPN with Cisco VPN Client (version 5.0.07) works absolutely fine on Windows 8. Once you get the set up right, everything works fine (we are using full tunnel) including internet access.
If you struggle to get it working then let me know and I can help you out. There's not much info out there on the internet. I had to do it the hard way.

X201 Tablet: Drivers not working for Network controller on Windows 7 Pro x64

Hello,
After downloading and installing all LAN and WLAN drivers for X201 Tablet, I couldn't find one that works on Windows 7 x64.
How can I proceed?
Thank you in advance
Solved!
Go to Solution.

I fixed it by downloading this drivers:
https://downloadcenter.intel.com/download/18713/Network-Adapter-Driver-for-Windows-7-
And after installing them and restarting, searching for them manually from the Device Manager.
Cheers

Sound & Graphics Drivers not working for Qosmio F15R

I was granted this Laptop with nothing more than AC Adapter. I didn't need the information contained in it and didn't want to deal with its configuration issues either, so I started planning formatting it. Looking for model number label at the bottom found it says "Qosmio F15R". I couldn't found this model number at support website for drivers, closest model was F-15AV201, figured it out by watching its pictures in detailed specs documentation. Everything but Bluetooth seemed to be available, so I formatted and reinstalled Windows XP Pro SP3 and then downloaded all drivers. Touchpad, Ethernet, Wireless, Flash memory, TV-FM and DVD-RAM worked just fine. On the other hand Sound, Display and Modem didn't work at all.
While installing Sound driver I got this error message:
http://img21.imageshack.us/img21/5075/sounddriver.png
(it says: "couldn't find driver, reboot and reinstall")
After installing Display driver checked display adapter properties and found this:
http://img402.imageshack.us/img402/5171/vga.png
(no information available and even scrolling on web browser is crappy)
After installing Modem driver realized it was not identified:
http://img237.imageshack.us/img237/4613/devicemanager.png
(Sound, Display, unknown device, Modem)
I thought I was using drivers for wrong model, so I downloaded PC Wizard, a freeware that identifies hardware configuration:
http://img262.imageshack.us/img262/6452/pcwizard.png
wich gave me chipset, processor, video card and-
http://img175.imageshack.us/img175/4121/soundr.png
-sound card: 82801FB ICH6 AC'97.
I couldn't find any proper driver nor for sound nor display, so I tried a shareware, Everest:
http://img337.imageshack.us/img337/6199/everesth.png
wich showed me the same chipset, video card and sound card model numbers than PC Wizard.
I realized that chipset, and display model didn't match detailed specs documentation. I thought that hardware was not working properly, so I downloaded and installed a Linux distro (Kubuntu 9.10 RC i386), and fount out that display and sound were working just fine but I need it to work properly with Windows XP.
Can anyone tell me where can I get sound and display drivers (and even Bluetooth if possible) for this laptop? Thanks in advance. Regards.

I have the same problem with audio driver. I can send you the graphic driver that works with Qosmio F15R if you need. My email: [email protected] Toshiba is so bad in supporting with their products.

HP Probook 4440s WIFI Drivers Not Working After Windows 10 Update

I updated my Hp ProBook 4440s from windows 7 32 bit to Windows 10 32 bit, everything is working except for my WiFi it says 'Windows did not detect any networking hardware' Can you please provide me with the compatible wifi drivers for Windows 10 Pro 32 bit. I hope you can help

Hi: I guess what I meant to say is that you may want to play around with some of the advanced settings for the card in the device manager. It seems that reading the article you posted, that procedure may have been for folks that have Cisco software to allow for Virtual Private Networking (VPN) and I don't think the drivers you have include any Cisco extensions. You can see if there is Cisco networking software by going to the Programs menu in the control panel and see the list of programs installed. There are usually 2-3 Cisco networking software items listed if you do. Sometimes tweaking those advanced settings help. Here is an article that explains what some of these settings are for. http://superuser.com/questions/342759/can-somebody-explain-about-wi-fi-device-manager-settings-and-power-settings-in-w The ones I normally change are: Enable WMM. Set Roam tendency to conservative. Roam decision to optimize distance. I had to change some setting on an old Intel 5300 wireless card to allow it to connect in W10. The drivers were there, etc but when I went to connect to a network, it did nothing.

HP Envy 700-214 desktop drivers not ready for Windows 10 Prime Time

Really disappointed in HP for not being ready for W10 rollout. I upgraded my HP Envy desktop PC 700-214 and after the upgrade, I could not connect to the internet. Didn't recognize the networking hardware. Went to HP Support (on different computer) and found out here aren't W10 drivers yet for this machine. Very Poor.My wife has a Dell laptop and we have another older Dell that upgraded no problem. Why because Dell is on top of their $__t when it comes to this stuff.Won't by HP again.

MrDimplz wrote:
Really disappointed in HP for not being ready for W10 rollout. I upgraded my HP Envy desktop PC 700-214 and after the upgrade, I could not connect to the internet. Didn't recognize the networking hardware. Went to HP Support (on different computer) and found out here aren't W10 drivers yet for this machine. Very Poor.My wife has a Dell laptop and we have another older Dell that upgraded no problem. Why because Dell is on top of their $__t when it comes to this stuff.Won't by HP again.Did you not try to reinstall the last support Drivers into Windows 10 to see if it works? Also with the lastest Windows HP will probably not support redoing drivers for older system as that will be cost prohibited to do. And it will be up to the Endusers to find the right drivers and software that matches their system to work with Windows 10 assuming they work with Windows 10. As to Dell that is something only Dell can answer that question and since we don't know if this is Dell Consumer or Business product since this falls outside of HP forums to discuss. You can't expect to have drivers if your system is too old to support Windows 10.

Jabber client's click to dial feature is not working for Windows 7 Proffessional OS

Hi,
Currently running UCM 9.x and CUP 9.x. There is no AD intigration for UCM.
Problem i am facing is that the Jabber client is working properly for Click to dial feature on Windows 7 enterprise OS and it is not on Windows 7
Professional OS.
The Jabber client which is logged on to Windows 7 enterprise OS, works
fine but if same user can logged on to the Windows 7 Professional OS will
not work click to dial.
Please help us to resolve it.
Thanks & Regards,
Krishna

Hi John,
Thanks for your reply but I can't see the option to reach the "deployment" perspective. Its not available for me.
Btw, I'm using SAP NetWeaver 7.1 Composition Environment SP12 PAT0000 Build id: 201105061501.
Also, I have checked a few SDN posts about using the "undeploy" tool after connecting using telnet, but I can't use that method too as telnet ports are blocked by firewall. We use different method to connect to the OS, if required.
Any other suggestions?
Thanks,
Deoraj.

Serial Number for CS5.5 Production Premium that I received for Mac download not working for Windows

My ProductionPremium CS5.5 serial number for my Mac is not working when I download and install ProductionPremium CS5.5 on my windows machine. Do I need to deinstall on my mac or get another serial number issued?

This is expected. Serial numbers are platform specific and platform swaps only apply to current versions. You need to upgrade to CS6 and make the switch.
Mylenium

Drivers Not available for windows 7 64 bits

HP Pavilion G6-2302ax Drivers not available
1. Graphics
PCI\VEN_1002&DEV_6840&SUBSYS_184A103C&REV_00
PCI\VEN_1002&DEV_6840&SUBSYS_184A103C
PCI\VEN_1002&DEV_6840&CC_030000
PCI\VEN_1002&DEV_6840&CC_0300
2. Bluetooth Controller
PCI\VEN_1814&DEV_3298&SUBSYS_18EC103C&REV_00
PCI\VEN_1814&DEV_3298&SUBSYS_18EC103C
PCI\VEN_1814&DEV_3298&CC_0D1100
PCI\VEN_1814&DEV_3298&CC_0D11
3. Ethernet Controller
PCI\VEN_10EC&DEV_8136&SUBSYS_184AEC103C&REV_05
PCI\VEN_10EC&DEV_8136&SUBSYS_184AEC103C
PCI\VEN_10EC&DEV_8136&CC_020000
PCI\VEN_10EC&DEV_8136&CC_0200
4. Network Controller
PCI\VEN_1814&DEV_3290&SUBSYS_18EC103C&REV_00
PCI\VEN_1814&DEV_3290&SUBSYS_18EC103C
PCI\VEN_1814&DEV_3290&CC_028000
PCI\VEN_1814&DEV_3290&CC_0280
5. SM Bus Controller
PCI\VEN_1022&DEV_780B&SUBSYS_184A103C&REV_14
PCI\VEN_1022&DEV_780B&SUBSYS_184A103C
PCI\VEN_1022&DEV_780B&CC_0C0500
PCI\VEN_1022&DEV_780B&CC_0C05
6. UNIVERSAL Serial Bus (USB) Controller
PCI\VEN_1022&DEV_7812&SUBSYS_184A103C&REV_03
PCI\VEN_1022&DEV_7812&SUBSYS_184A103C
PCI\VEN_1022&DEV_7812&CC_0C0330
PCI\VEN_1022&DEV_7812&CC_0C03
7.
UNIVERSAL Serial Bus (USB) Controller
PCI\VEN_1022&DEV_7812&SUBSYS_184A103C&REV_03
PCI\VEN_1022&DEV_7812&SUBSYS_184A103C
PCI\VEN_1022&DEV_7812&CC_0C0330
PCI\VEN_1022&DEV_7812&CC_0C03
Need to install these drivers for windows 7 64 bit
This question was solved.
View Solution.

Hi:
First download and install the amd chipset drivers and reboot.
http://support.amd.com/en-us/download/chipset?os=Windows%207%20-%2064
Graphics:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-103954-1&cc=us&dlc=en&lc=en...
Audio:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-103764-1&cc=us&dlc=en&lc=en...
Bluetooth Controller:
http://h20565.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=5229463&swItemId=ob_113004_1&swEnvOid=405...
Network Controller:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-111781-1&cc=us&dlc=en&lc=en...
Ethernet Controller:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-103913-1&cc=us&dlc=en&lc=en...

Network drivers not working and Windows Error Recovery Message issues

I have a ThinkPad laptop T530 series in which about five of my network adapters are showing the exclamation mark in a yellow triangle next to them. When clicking on properties, it states that" this device will not start--code 10." I have tried the network sharing troubleshooter and this has not worked.
The second issue I am having is that upon starting my computer I am constantly getting a Windows Error Recovery message which I have to press on the proceed to Windows as the startup repairs do not seem to rectify the issue.
I would very much appreciate if someone could help me resolve these issues

I don't have a solution to your main problem, but I have one for the error message.
If I am right, then Airport is causing the problem. 192.168.1.1 is the address that the Airport Base Station will take right away. To fix this, you need to go into Airport Admin Utility. Click on your base station and click "Configure." Click on the "Network" tab. Now it should look something like this:
http://i198.photobucket.com/albums/aa187/adam_0/Network%207-28-07/Picture2.png
The problem is that the Airport is using the same IP number set as the router that you have. If you disconnect or unplug the Airport, then that would fix it easily, but if you want to keep your Airport connected, then all you need to do is pick one of the other number formats, like this:
http://i198.photobucket.com/albums/aa187/adam_0/Network%207-28-07/Picture4.png
Now, I'm no expert on this stuff, but from what I understand, this could get you one step closer to your destination. Good luck!

Photo Stream not working for Windows 7 iCloud

I am using an iPhone 4 and Windows 7--I have downloaded iCloud but when I take a new picture on my iPhone it does not show up in my "Uploads" folder. Am I doing something wrong?

Hi,
I suggest you try the following:
1. Boot into
Clean Boot Mode and try updating again.
2. Run the Microsoft Fixit and see how it works.
Fix the problem with Microsoft Windows Update that is not working
3. Try System Update Readiness tool by referring to
What is the System Update Readiness Tool?.
4. Run
System File Checker tool and see how it works.
Hope this helps.
Vincent Wang
TechNet Community Support

Elements 5.0 not working for Windows 8. What to do?

Of course, Elements 5.0 is ancient, but I was still happy with it. Can I upgrade to a more recent version, for working in windows 8.1?

Which version of windows 8 do you have?
If you press the Windows Logo key plus the Pause/Break key, what does it say on the screen that is displayed?
Or right click on the lower left corner of the screen and click on System.

Printer Software not Working for Windows 8.1 and Drivers not Working with USB 3.0

We have a HP CM1312 MFP. We recently got two new windows 8.1 machines. We tried downloading and installing the windows 8 64 bit software, but everytime we tried installing the software the software program would exit abruptly.
We then tried just downloading the printer drivers and installing these. They installed ok, but when we tried to connect the printer via USB it said the printer did not support USB 3.0 which are the only ports we have on the new computers.
Is there a solution to either of these problems? Without the software we cannot use the fax or scanner.
Thanks.

Can you connect USB 2.0 data drives?
What make/model are the computers?
Please mark the post that solves your issue as "Accept as Solution".
If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
I am not a HP employee.

HP drivers not working for Windows 8.1

Similar Messages

Maybe you are looking for