HP dual layer DVD Burner with Lightscribe

Does OSX 10.4.7 and my MDD FW800 support this drive? Thanks, WillL

In answer to both questions I am looking at the HP dvd840i internal. I have Disclabel which in version 3 supports Lightscribe capability. Regards, WillL

Similar Messages

Using an external dual layer DVD burner with iDVD??

I created a 3 hour iDVD file on a dual 2.0 G5 desktop with a dual layer DVD Superdrive. I have since migrated to a MacBook Pro. Now, when I open the iDVD file, it says there is no DL Superdrive on my system and that it will convert the file to single layer or something like that, with the option to cancel or proceed. If I purchase an external DL DVD burner will iDVD detect it and allow me to continue working with the file?? Or do I have to get a whole other Mac with a DL Superdrive (iMac or 17" MBP)?? The error specifically stated 'Superdrive', so I am not sure if just an external DL will work. Thanks for any help.

Sorry to have to post this here, but your topic "How can I see the bitrate while playing a DVD?" in the DVD SP forum.
http://discussions.apple.com/thread.jspa?threadID=325516
has been archived and no one can reply to it.
Thank you so much. Using VLC 0.8.5 to view bitrate was an excellent discovery for those who don't have the cash to buy the DigiGami poducts.
Perhaps you should re-open a new topic for others to respond to.

Unable to burn Dual Layer DVD's with Toast

Hi all,
I'm having issues trying to burn dual layer dvd's with either Toast 10.0.8 or 11.0.1. I keep getting the Interface -50 error and sense key 0x02 error saying media is incompatible.
I have tried dvd's by DataWrite and Elite M and they both show error. It's strange though as I have been using previously purchased Elite M dual layer dvd's of the same spec as these newly purchased ones, and they worked fine!
My dvd drive is a standard OPTIARC AD-7170 that came with the Mac Pro as spec'd.
I am able to burn single layer fine, and dual layers are read. I'm just unable to write dual layer at the moment.
Any ideas? I'm stuck on what to do and what manufacturer's dual layer dvd's will work with this drive. It can just do +R DL.
Could it be I've been unlucky to have had 4 bad batches? I brought 2 x 2 (25 disc) tubs of DataWrite and same by 50 disc tubs Elite M.
Please help.
Thanks,
Ash
P.s. I have tried creating a new admin user account to see if I am able to burn under that. I get the same errors.
P.p.s. "Hopefully" this is just a media issue and I can find some that works again. If not and it is a drive fault what can I do? What writers spec'd same are available internal for my Mac Pro?
Message was edited by: AshleySmith06

Grant Bennet-Alder wrote:
If think you may be using the wrong speed-range media for that drive's capabilities. As I mentioned, there are two ranges, and 8X media cannot be written in a 2.4x (sometimes referred to as 4x) drive.
When you get an error message that actually tells you something concrete, you should listen to it:
CANNOT WRITE MEDIUM - INCOMPATIBLE FORMAT
... is pretty unambiguous. It's a problem with the Media.
Off-Brand media is the next weak link in the chain. One of their many problems is that they vary wildly from batch to batch. Verbatim media are thought to be the "gold standard". Get a small number of Verbatim Media and see if you can make ONE master on the best in the market. If you can, the problem is in the Media. If you can NOT, the problem is in the process.
Like I mentioned I have never had issue with Elite M before, and I always set Toast to burn "Best" under the recorder settings.
Here's what system profiler says for the disc and drive...
OPTIARC DVD RW AD-7170A:
Firmware Revision: 1.N8
Interconnect: ATAPI
Burn Support: Yes (Apple Shipping Drive)
Cache: 2048 KB
Reads DVD: Yes
CD-Write: -R, -RW
DVD-Write: -R, -RW, +R, +R DL, +RW
Write Strategies: CD-TAO, CD-SAO, CD-Raw, DVD-DAO
Media:
Type: DVD+R DL
ID: UMEDISC DL1
Blank: Yes
Erasable: No
Overwritable: Yes
Appendable: Yes
Write Speeds: 1x

Dual layer dvd burning

Hi,
I need some help regarding dual layer dvd burning.
I never burned a dual layer dvd before and am going to in the next few days for a big movie screening. So I better get this right.
How do I set the layer break? do I just set it to be automatic or should I set a chapter in the track? if yes, then where do I suppose to put the chapter.
Is there any advise regarding dual layer burning ? so that I have less possibilities of messing things up.
Its a 115 mins movie. Im planning to encode it with 6.5 avg 8 max.
Is it safe to put a lot of chapters in?
I won't have dvd menu. I will just set it to play straight away.
thanks.
Jack

I'm not an expert in the least but I have worked with duel layers and let me tell you than can be a real s.o.b. I'm not sure what the scoop is on them but they tend to glitch out while your burning. I made three and 1 worked perfect the other two not at all and for some reason the 1 that did work only played on about half of the DVD players they were played on. When I got it into a DVD player that worked the chapter markers were not a problem. I had four seperate segments that were linked up and played fine. We used this for a screening in front of about 400 people.
Our feature was about the same length as yours so after the screening we decided to just take the quality down a little (which you can't even tell) and put it on a normal DVD R. We saved a ton in duplication.
Setting the Duel Layer is pretty easy, it's all in the inspector under the disc/volume tab but make sure that in your outline window the main DVD at the top is highlighted. I don't think it matters if you have a chapter in the middle of the footage or anything like that. You can just link up one long stream if needed. Be sure to try out the DVD on the actual player you are going to use. Good luck.

Dual layer DVD burner any time soon?

I have an old PowerBook 1.33ghz. I'm itching to replace it with a MacBookPro. I upgraded this PowerBook with a dual layer DVD burner, and I use it a lot. I moved to the US from the UK and send many DVD's back to family and friends in the UK. I can't live without the dual layer DVD writer, plus backing up requires less DVD's and hence less space on my shelves.
Anyone here know when Apple will release a model with a dual layer DVD writer? I refuse to buy an external.
This old G4 has better DVD support than Apples flagship portable computer, doesn't seem right does it. I keep thinking I can live without dual layer, but its just such a step back.
Anyone know of when this may change and MacBookPro will get a dual layer burner? I dont know how long I can wait to get my hands on the new MacBookPro . . .

As soon as the industry can make one (so thin). I'll be buying one to replace it on my MBP. Might be Blu-ray

Recommendations on Dual Layer DVD Burner Purchase

Anyone have any recommendations on a Dual Layer DVD burner to purchase to replace the old superdrive?

Nope - both formats are for both platforms, but there was a spate of +R players and discs made available on PCs when Apple were only using -R. However, I have two or three PC burners that were -R only (and are now sitting on a shelf somewhere) from those days. The capacity of both is so close as to not be an issue, although +R does hold slightly more data. The gross capacity of a DVD-R is 4.7GB, which is in fact 4.372GB when used in a computer. For DVD+R the gross is 4.73GB which converts to 4.377GB on your computer. I guess for some folk that additional capacity might be necessary, but it isn't really worth worrying too much about, IMO.
Using dual format drives is a good idea, as you can then use either type of disc... however if you read into the background of the formats you'll see that -R is slightly ahead of +R in the compatibility stakes, although more and more players are able to deal with both equally well.
When it comes to burning a DVD in your superdrive, the slower you burn the better the compatibility is likely to be, however some folk report 100% success with fast burns every time (I've had my share of problems with faster burners). As long as you get an Apple compatible drive you should be OK, if faster burning is what you want to do.
Layer break points - on a dual layer disc there comes a point when the laser in the player has to switch from the first to the second layer in order to access the data written there. The point at which this happens is controllable by the DVD author and is called the layer break point. However, on some media (specifically dual layer DVD-R) there is no point in setting this up as the first layer will get written until full, no matter what. There will then be an automatically set break point. When this occurs the change over is flagged as 'seamless' which is intended to make a smooth switch over but there are some players which cannot handle this kind of switch and it needs to be flagged as non-seamless. Other types of media (DVD+R DL) will allow you to set the break point where you want it and will allow you to set it as non-seamless. This helps increase the compatibility of your disc when playing back in set top players.
In DVDSP this means it is probably better to use DVD+R DL media when creating a DL sized project.

Can a G4 eMac take a dual-layer DVD burner?

I've been told it can't, but I'd like a second and third opinion.
Anyone know?
Thanks.
Kurt

Thanks, JMVP. But Neil's thread doesn't really answer my question. What I meant was; I intend to buy an external dual-layer DVD burner and leave the original PowerDrive in the eMac. I want the dual burner to be able to burn dual layer DVD-R disks. Somebody told me that a G4 eMac hasn't got the something-or-other to operate any kind of dual layer burner.
What you're saying is, the right kind of dual layer burner will be compatible with an eMac, OR, the right kind of eMac drive will be compatible with a dual burner?
Sorry to be dense, this is unchartered territory for me.

Dual-layer DVD burner in HP Pavilion 15-p245sa?

Can anyone tell me if the Pavilion 15-p245sa has a dual-layer DVD burner? I'm trying to find out for a friend who has to make a purchasing decision this week, so any speedy replies would be much appreciated!
Thanks
This question was solved.
View Solution.

Hi,
Yes it has.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

How do I burn a dual layer DVD video with Premiere Elements?

I am trying to burn a video from Premiere Elements to a dual layer DVD. I choose "DVD" -- and it seems to recognize my disc -- then I "fit to disk" (the video is one hour -- then I attempt to burn -- and nothing happens. I have tried it on my internal DVD and on my external BluRay --neither seems to work

rross43
If you insert a DVD double layer single sided disc in the burner tray, Premiere Elements recognizes that as such with Publish+Share/Disc/DVD disc. If you insert a DVD standard in the burner tray, Premiere Elements recognizes that for what it is.
The only time you see a distinction for double layer vs standard disc is in the burn to folder.
Both DVD disc types use the same max bitrate 8.00 Mbps. But, the DVD standard capacity is 4.38 GB not really 4.7 GB, and the DVD double layer single sided is 7.95 GB not really 8.5 GB. That has to do with the disc capacity labeling and not Premiere Elements.
Good job with the burn to folder. In a time crunch, you can take the VIDEO_TS Folder from the saved folder and take it to DVD-VIDEO on DVD double layer single sided disc using the ImgBurn program.
But, back to burn to disc....the successful burn to folder is pointing to the burner or the disc itself. What brand disc are you using?
What is the mode of failure for your burn to disc....you say nothing happens. Does that mean you hit the burner button and nothing happens?
We could look at deleting the Adobe Premiere Elements Prefs file or do a program uninstall, free ccleaner run through, reinstall with antivirus and firewall(s) disabled. But, let us review the burner and discs situation first.
Thanks.
ATR

Trouble burning dual layer dvd's with my superdirve

Hello, my question is regarding burning dual layer dvd's on my macbook pro. After finishing up a 5.6 GB movie in DVDSP4, i exported as an image (burned it as a .img) and then opened it up in disk utility for burning. Upon execution, i received an error message that said " the device failed to calibrate the laser power level for this media." I then tried burning the .img via DVDSP4 as well as the standard drag to disk on my desktop, all with the same luck. When trying the standard drag, drop and burn method (burn folder on my desktop), i received the error code 0X80020022.
After having no luck, i tested my super drive with standard CD's and single layer DVD's which it burned to just fine. I then tried switching media from memorex dvd dl +r's to sony dl + r's, but unfortunately it just refuses to burn to dual layer.
Any ideas as to what might be the problem?
Thanks.
Terry

Great Job

Burning dual layer dvd+rs with a pioneer dvd-rw dvr-112 with firmware 1.15

can i do this? i have tried once before and failed, if i have to update firmware do i follow the same instructions as for the dvr-109 as in the below thread/topic? i always us verbatim dvds so that shouldn't be an issue. i notice that dvd-r dual layer dvds are getting scarce and are pricey...... exact instructions would be very helpful if i have to update the firmware would be very very much appreciated as i've heard updating firmware is tricky and risky if not done right proper!!! cheers in advance......

Hi-
Welcome to Discussions!
OS X 10.4 supports DVD+R DL burning.
So does the Pioneer.
DVD-R DL isn't supported in OS X10.4, but is in OS X 10.5.
i have tried once before and failed,
What was the failure? Error reported? What method was used?
Firmware versions up to 1.24 are available, though 1.15 had the improvements for DL burning. 1.21 adds for specific media, and 1.24 improve CD-R support.
http://wwwbsc.pioneer.co.jp/product-e/ibs/devicee/dev00002r_e.html#f112
If you consider updating the firmware, the method is exactly the same as for other drives, using DVRFlash.

Media write error for dual layer DVD burn

I am having a problem burning a dmg to a dual layer DVD using the internal DVD writer. I have tried both Disk Utility and SimplyBurns.
Both program s go through the preparation for the file, and when it attempts to burn the disk I get a 'media write error'. I am using Memorex DVD +R DL disks. I have successfully burned both CDs and regular DVDs with the drive.
Does anyone have a suggestion on how I can fix this?
Thanks

I am using Memorex DVD +R DL disks.
Try Verbatim DVD+R DL discs.

Playing dual layer dvd's with iBook superdrive

I've burned a couple of dual layer DVD's (8.5GB) with my iBook G4 and an external Lacie DVD burner.
I used Toast 7, experiencing no problems at all.
The DVD's play perfectly using the Lacie driver itself, or my Sony DVD player, or even a 10-year-old Pioneer DVD drive on my PC.
But... my iBook Superdrive refused to even read them.
The disk just makes a couple of turns and then the superdrive ejects it with no message.
The superdrive plays perfectly the commercial dvd's, which I know are usually double layered.
Does that mean that superdrive is not compatible with burned dual layer dvd's?
iBook G4; iPod 60GB v1.2.1; iTunes 6; Airport Xpress Mac OS X (10.4.4)
iBook G4; iPod 60GB v1.2.1; iTunes 6; Airport Xpress Mac OS X (10.4.4)

I don't believe the SuperDrive for the iBook is set
up to read/write the dual layer DVD's.
I didn't expect it to write DL DVD's, that's why I used an external burner.
The problem is when reading the burned dvds
Go to your Apple Menu and select "about this mac".
Click on the "more info" button and navigate to the
Disc Burning label. Select it.
If your SD is dual layer compatible you'll see "+R
DL".
It says generically that SD reads DVDs
What speed were you burning the Dual DVD's on the
LaCie?
don't know, really, but Toast is set to burn disks at the best speed:
one was a DL DVD+R 8x, the other a DL DVD-R 4x
it's IMPOSSIBLE that SD can't read dual layer DVDs: commercial DVDs are 6-7GB, they MUST be DL and they play perfectly.
and if it really can't play burned DL DVDs, that's really a shame! >:-Z

Usb dual layer dvd burner

i'm wanting to purchase a usb dual layer dvd-r burner for my macbook. does anybody know of one that will work with idvd, as i've read that there are compatibility issues with them.

Use Patch Burn.
http://www.patchburn.de/
The new MBPs use a MATSHITA DVD-R UJ-857D as an optical drive. It's the same model number as in the MacBook, only with a "D" added for DL. If it's physically the same size, it may work without any modification.
-Bmer
Mac Owners Support Group
Join Us @ MacOSG.com
ITMS: MacOSG Podcast
 An Apple User Group 

Dual Layer DVD Burner

Not to duplicate any other post, but can I burn dual layer DVD's? iDVD asked me to put in a Dual Layer DVD but that doesn't always mean that it is passable. Just can't find anywhere where it states that my G5 iMac with iSight built in has a dual layer burner.
Thanks for the info.

Run System Profiler. Look under the information about the optical drive. It will list all of the drive's capabilities.

HP dual layer DVD Burner with Lightscribe

Similar Messages

Maybe you are looking for