HP DV6-6001SA Screen Display is ALL RED/PINK!!!

Please hekp, screen is all shades of red and pink, but when i connect to my tv via hdmi all is fine?
Regards

Hi, thanks for the reply. I have tried another screen and it gives the same result, red/ pink display.

Similar Messages

HP DV6-3160ez screen Display is ALL RED/PINK..

HP DV6-3160ez screen Display is ALL RED/PINK sometimes it is all blank ...could you please help me with the issue.

Hi, thanks for the reply. I have tried another screen and it gives the same result, red/ pink display.

HT4061 My screen display is -- all of a sudden -- way large. I can't get it back to normal size?

My screen display on my iphone is too large. Can't get it to function... help!

Double Tap the screen with three fingers...
Then go to Settings > General > Accessibility and make sure Zoom is turned Off.
http://support.apple.com/kb/ts3129

Screen Display off with red Notification light

Dear Team I've BB Curve 9320 and am facing display off issue in my phone and regularly red notification light is blinking and keypad light is also lighting. I've visited East Delh(India) and Noida Sec 2 Service center but found there was no service center which address was mentioned there.I tried to update my software but failed into my attempt it's asking password everytime whenever I do a same.   Kindly resolve my issue and share valide contact no. to share my griviance with you people.

Hi and Welcome to the Community!
Please try this sequence...note that, throughout the entire 4h15m process, your BB must remain directly connected to a known-good wall charger (not PC USB, not a cradle):With the battery inside, connect your BB to the wall chargerLeave it alone for 2 hours, no matter what the LED or the display doesRemove the batteryWait 15 minutesInsert the batteryWait another 2 hours, no matter what the LED or the display doesThis has been known to "kick start" some BBs.
It is also possible that your battery or BB has experienced a problem...to test, this sequence is needed:Obtain an known good and already fully charged additional battery...use it in your BB and see what happensObtain access to a known good and identical BB...use your battery in it and see what happensThe results of this will indicate if it's your BB or your battery that has the problem. Note carefully please that "new" and "know good" are not necessarily the same things. While rare, a "new" battery certainly could be defective. Rather, the simplest (and least costly, btw) method to conduct this test is to find someone with an identical BB who has no issues...trade batteries and see what happens.  If possible, you could also attempt to boot into Safe Mode:KB17877 How to start a BlackBerry smartphone in Safe ModeIt may take you multiple attempts to get the ESC key sequence (press/release/hold) correct, so be patient. When/if successfully into Safe Mode, see what happens.
If the behavior ceases, then think carefully...what happened just before this behavior started? A new app? An update? A Theme? Something else? Think carefully as the smallest change could be causal...and attempt to undo whatever that was.
But if the behavior continues in Safe Mode, then you may need to consider more drastic actions -- WIPE, OS Reload, BBSAK Wipe/Reload, and the "Bare Bones" OS Reload Process. To prepare, you should be sure that you have a full backup to your PC...please review the Backup link in my auto-sig on this post for instructions.
You may also need the use of these tricks:KB10144 How to force the detection of the BlackBerry smartphone using Application LoaderKB27956 How to recover a BlackBerry smartphone from any statehttp://crackberry.com/blackberry-101-lecture-12-how-reload-operating-system-nuked-blackberryprateekasthana wrote:
Dear Team I've BB Curve 9320 and am facing display off issue in my phone and regularly red notification light is blinking and keypad light is also lighting. I've visited East Delh(India) and Noida Sec 2 Service center but found there was no service center which address was mentioned there.I tried to update my software but failed into my attempt it's asking password everytime whenever I do a same.   Kindly resolve my issue and share valide contact no. to share my griviance with you people.  Concerning your questions...refer:http://supportforums.blackberry.com/t5/Social-Lounge/How-This-Site-and-Formal-Support-Work/td-p/2540549This forum is a user-to-user community, so we have no information about service centers local to you.
Good luck and let us know!

Want screen display lighted all of the time---how can do ?

blackberry 8130 want to be able to adjust screen backlight to always on---rather then the 2 minutes max on time with the standard settings. HELP

To change the Backlight setting go to Options -> Screen/Keyboard -> Backlight Timeout: 2min/90sec/1min/45sec/30sec/20sec/10sec (any of these values).
tanzim
If your query is resolved then please click on “Accept as Solution”
Click on the LIKE on the bottom right if the post deserves credit

Why is my iMac computer screen displaying vertical blue and pink lines through it?, why is my iMac computer screen displaying vertical blue and pink lines through it?

My iMac which is but a few years old at this point is displaying vertical lines thru the computer screen, what is this and what can be done about it?

Do you get the same result starting in Safe Mode ?
As old as your iMac is, have you cleaned out the dust? Dust buildup can lead to over heating issues. Remove any and all things plugged into it including the power cord, Remove the RAM access grille. Vacuum all openings starting with the RAM access area (air intake). Vacuum all ports and plugs, DVD slot and the opening across the top of the rear of the body. Blow compressed air through all your openings and vacuum again to remove any dust you loosend. Reinstall the RAM grille. Plug in the keyboard and mouse if not blue tooth. Insert power cord...
You are now in a perfect position to do a
SMC RESET
http://support.apple.com/kb/HT3964
Shut down the computer.
Unplug the computer's power cord and ALL peripherals.
Wait 15 seconds.
Attach the computers power cable.
Wait another 5 seconds and press the power button to turn on the computer.
It is the 5 second timing that initiates the reset.
Here is a Widget to monitor your temps and other operations:
http://islayer.com/apps/istatpro/

New User: LR imports all Canon RAW's and jpgs Red / Pink

I'm not a guru or professional - I shoot alot with an XTi / 400 with various lenses - been successful using Canon's software. Downloaded LR and imported Canon RAW's and they're all red / pink - entirely red / pink. I have spent 3 to 4 hours reading forums / searching for answers and cannot find anyone else with this problem. I then tried importing jpgs from a Sony - they're also red / pink - very frustrating. Leads me to believe perhaps I have a driver / card issue on my computer.
I'm running a 2.8 P4 with HT, 1 gig RAM, video I think is an older nvidia 9600 (not sure I'm not at my computer this moment). Anyway, anybody with any tips on what to do? I have been through every menu item repeatedly looking for some kind of clue - heretofore the answer eludes me.
Appreciate any help / hints!
Trey

My usual suggestion it to start out by adjusting your monitor by eye using Norman Koren's calibration charts, after eliminating any monitor profile in the OS.
http://www.normankoren.com/makingfineprints1A.html
http://www.normankoren.com/makingfineprints1B.html#gamma_3lvl
If you are not satisfied with those results, you can move on to something like the Pantone Huey or Huey Pro, the ColorVision Spyder series, one another similar device.

HP pavilion dv6-6c01ej On-Screen Display not working

Hi, I have an HP pavilion dv6-6c01ej and I want to use the on-screen display, to see for example when the volume when I turn it up or down (also for brightness change and so..).
I looked in the Programs and Features in Control Panel and saw I have the last version of the driver (version 1.3.5).
I couldn't find the actual prgoram in the Start menu (I don't even know if it exists).
I wanted to download it again so I can try uninstall and install, but the file could not be found, using this link:
http://ftp.hp.com/pub/softpaq/sp55001-55500/sp55152.exe
From here:
http://support.hp.com/us-en/drivers/selfservice/hp-pavilion-dv6-6c00-entertainment-notebook-pc-serie...
I don't know if it's the same driver for all the pavilion dv6 pc's.
Also, I tried downloding the HP MediaSmart for that, but the download failed for some unknown reason.
So, How can I turn this feature on?
This question was solved.
View Solution.

Hi:
See if this version works...
http://h20566.www2.hp.com/hpsc/swd/public/detail?swItemId=ob_101310_2

My macbook pro's screen display has suddenly gone into a strange colour setting where everything appears in a kind of infrared colour palette an I can;t seem to change it back. It's the same for all icon and websites, does anyone know how to restore?

My macbook pro's screen display has suddenly gone into a strange colour setting where everything appears in a kind of infrared colour palette an I can;t seem to change it back. It's the same for all icon and websites, does anyone know how to restore?

Wow! I think I had this same issue just last night.
I was cleaning my macbook pro retina on the outside. Then I opened it up and was wiping dust off the monitor and I can't pinpoint exactly when, but the colors changed suddenly. It looked super strange, it was like green halo's and it looked worse when looking at it at an angle. Of course I took no pictures!!! I was freaking out that my 2 grand laptop was busted and I somehow removed a protective film or something.
But I digress... The image looked very green and spacey, it was almost a neat effect. After about 5 minutes it started to look a little more digital though. There were straight lines of this halo effect on the edges and top. After about 10 minutes it turned into a predominate issue with the blacks on screen. I could open a web browser and it was unnoticable on a white background. After about 15 minutes, you could only barely see the green cloud effect if you looked at the monitor from an extreme angle. After about 20 minutes, it was completely back to normal, I almost feel paranoid like I see a halo or something strange. But I believe that might be all in my head now.
So yerp, lemme know what you guys figure out.

I need to connect my Imac 27'' (newest version) up to 3/4 monitors (all 40'' LCD tv's with VGA and HDMI connections) with extended display to all external screens, not duplicate images. Is this possible?

i need to connect my Imac 27'' (newest version) up to 3/4 monitors (all 40'' LCD tv's with VGA and HDMI connections) with extended display to all external screens, not duplicate images. Is this possible?

I would suggest you visit an Apple dealer, preferably an Apple Store if there's one in your city, and ask for assistance in determining what you need. The questions and issues you bring up are rather complex to address in a technical support forum and would be better addressed in person where you and the salesperson can ask questions back and forth to arrive at the optimal setup.
Regards.

HT6093 the new thunderbolt display firmware NOW makes my screen go black all the time!!! how can I uninstall this last update?

the new firmware for the thunderbolt display now is making the screen go black all the time. _the fix created the problem!!!
how do I uninstall this update?
Jon

You can't. There is a long discussion in the Thunderbolt forum. Look there.

Ios8.....hate!'After upgrading my iPad will do nothing except refuse to take a charge display a black screen or a battery red line or the occasional apple logo. Have tried soft boot and hard boot and nothing!,!

After upgrading my iPad will do nothing except refuse to take a charge display a black screen or a battery red line or the occasional apple logo. Have tried soft boot and hard boot and nothing!,!

Hello there, Victoria.
Great job on troubleshooting on your own. The following Knowledge Base article offers up some great steps to review and additional recomendations:
iPhone and iPod touch: Charging the battery
http://support.apple.com/kb/HT1476
Resolving issues
If your battery doesn't charge, or if your device shows a low-battery image, black screen, or "accessory not supported" alert, follow these steps.
Inspect the connector at the bottom of the phone:
Make sure that there are no bent pins in the connector.
Make sure that the connector is free from debris.
If there are bent pins or debris, please contact Apple Support.
Otherwise, continue troubleshooting.
Make sure that the outlet you're using works.
Make sure that the Apple USB cable and Apple USB power adapter work.
Plug the device in to power and let it charge until your device turns on. This could take between 10 and 30 minutes. If you don't have an Apple USB power adapter, try connecting to a computer's high-power USB 2.0 port (not a keyboard). The computer must be on.
If the device still exhibits an issue, try turning your device off and then on again while connected to power.
If the issue persists, please contact Apple Support.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

When i try to switch on my Apple iPod Touch 2G 8GB , all i get is just the screen displaying " Connect to the iTunes " . What should I do?

WHENEVER I TRY TO SWITCH ON MY APPLE iPod TOUCH 2G 8Gb , ALL I GET IS JUST THE SCREEN DISPLAYING " CONNECT TO THE iTunes " . WHAT SHOULD I DO ???

Do just that. Connect it iTunes and restore it as it appears there is a software issue with the device.
B-rock

What happen on my 4GS screen display.all the app are diappear and have the background of the LED light inside the screen.can't see anything just only the line black and blue light

I JUST HAD A PROBLEM WITH MY IPHONE "4GS".THE SCREEN DISPLAY ARE BLANK.ALL THE APP ITS GONE.JUST HAVE ONLY "BLACK AND BLUE LINE"INSIDE THE SCREEN.ALL THE PHONE FUNCTION STILL ABLE TO RECIVED THE CALL BUT UNABLE TO MAKE PHONE CALL BECAUSE THE TAP ICON ARE GONE.

Not sure what the origin of the problem is, but you should try deleting iDVD's preference files.
First, close iDVD and go to your Home(YourUserName)/Library/Preferences/com.apple.idvd.plist
Drag this plist file to the trash. iDVD will automatically create a new fresh one when you reopen it.
Open iDVD.
See if the main screen is now visible.
Post back if that did not help.

The screen of my iPod has gone all red.

The screen of my iPod has gone all red and the whites have become blue rain like thing. Its one and a half year old iPad. Really disappointed

"Not to my knowledge."
Hmmm. Are you being completely open with us?
If it was dropped by friend or family, other threads here on this phenomemna indicate slapping it on the back a couple of times with increasing intensity caused the screen to return to normal....but no comment on how long it remained normal. Do a search on this forum for "red screen."
If you can state with certainty that it was not dropped, and if it is still under extended warranty, and if the Apple store believes you, they may give you a rebuilt one.

HP DV6-6001SA Screen Display is ALL RED/PINK!!!

Similar Messages

Maybe you are looking for