HP dv6-6188ca windows 7 pro 64b amd chipset 8G locks up copying files to/from external usb drive

When ever I try to copy a large (>2G) file to or from a external usb drive the computer starts the copy but gets stuck. It has to be powered off and the battery removed to get it to work again.

Please repost your inquiry in the Microsoft Windows 7 Performance Forum.
Thank you!
Carey Frisch
Microsoft MVP
Windows Expert - Consumer

Similar Messages

I am trying to restore my old Macbook Pro data using Time Machine on a new Mackbook Air from external hard drive, but when I install I get two different loggin accounts and I only want one loggin account

I am trying to restore my old Macbook Pro data using Time Machine to a new Macbook Air from an external hard drive, but when I restore I get two diferrent loggin accounts and I only wnat one loggin account to access all my data/files?

This web site might answer all of your Time machine questions:
http://pondini.org/OSX/Home.html
Ciao.

Can't copy my music from external hard drive to new MacBook Pro hard drive. "This operation can't be completed because you don't have permission to access some of the items."

I already tried going to "Get info" and "apply to enclosed items" but that doesn't work. I can copy over about 2gbs of music into my iTunes library but after that, it stops and I get the error. Please help. Any information that would lead to a solution would be great. Thanks!

Hi..
Best to post your topic in the iTunes for Mac community here.

Booting from external hard drive on intel-based MacBook Pro

Good day everyone. I know similar questions were raised in this community, but I still have some questions.
I have MacBook Pro(late 2011) with OS X 10.7.5 and external hard drive with Ubuntu 13.04, from wich i can boot succefully on my PC. But MacBook Pro will not boot from my external drive, no matter which key/combination i use during restart.
After googling I found some answers to my initial question, how to boot from external hard drive
https://discussions.apple.com/thread/1852633?start=0&tstart=0
http://www.everymac.com/systems/apple/macbook_pro/faq/macbook-pro-boot-from-exte rnal-firewire-or-usb-drive.html
http://support.apple.com/kb/ht1948
As I understand I need to format my external hard drive into GUID partition type and this will be enough to be able to boot from it on my mac?
With this new partition type, will I be able to install ubuntu again on my external drive?
Does GUID partition type supports NTFS, ext4 and FAT32, linux swap?(I use ntfs for big files, ext4 as partition for ubuntu and fat32, because i use windows, linux and osx)
Will I be able to boot from my pc from my external drive with this new partition type?
What are downsides, if any, to GPT?
here is info on my e-drive

LowLuster wrote:
The only OS that will boot from an external drive is Mac OS X or maybe Linux. For OS X to be installed on any drive it need to be formatted Mac OS Extended and have GUID partition table.
As for Linux I'm not that familiar with it but again for a Mac to boot it need an EFI partition on the drive and I don't think that is possible with NTFS or FAT32 let alone the native Linux format.
Went to wiki to learn more on efi but found artice on uefi.
Operating system loaders are a class of the UEFI applications. As such, they are stored as files on a file system that can be accessed by the firmware, called EFI System partition (ESP). Supported file systems include FAT32, FAT16 and FAT12, and supported partition table scheme is GPT only. UEFI does not rely on a boot sector, although ESP provides space for it as part of the backwards compatibility.[26]
Here is FAQ on official uefi website.
Can UEFI Secure Boot be adopted and implemented by a variety of operating systems?
UEFI specifications are platform-independent, supporting multiple platforms and architectures. In addition, UEFI specifications are designed to promote cross-functionality, as well as to support broad adoption across multiple operating systems, including Windows as well as Linux-based operating systems. The specifications are robust and can potentially complement—or even advance—other distributions, such as Linux-based distributions.
And here is wiki article on GPT expaining OS support.
It is obvious both uefi and GPT are ok with Linux and file systems such as FAT32, ext4 and NTFS.
I guess there is no much difference(or is that the same thing?) between uefi and efi used in Macs.
In your answer to Stark Industries you said that mac can boot linux from external hard drive, well this is not the info i got of official website and it is still my question, because your answer is very inconclusive and your info is partially incorrect

How can I transfer files off an external hard drive formatted for windows?

I just bought my first mac (yay!) and am trying to transfer my files off of my old pc. The problem is that I stored all my personal files on an external hard drive, which is of course formatted for windows. My mac will open it, but it is "read only." I tried plugging it back into my pc and using the Migration Assistant to transfer my files over, but it was not detected (rest of the pc was).
However, the second time I tried plugging it in to my pc, it told me it would need to be formatted first. Obviously my mac has changed something on it, and now all my personal files are on a hard drive that is unusable by either my old pc or my new mac!
Any suggestions would be appreciated! Heads up though, I am not especially computer literate, and my pc needs to stay intact as the husband needs it and some of the programs on it for school. Also, I have a second external hard drive that is brand new with nothing on it, if that will come in handy.
Thanks!

Format the extra HDD to EXFAT as previously indicated. There are two ways that can use to transferr the data.
1. Connect both drives to the PC and the copy the files to the newly formatted (EXFAT) drive from the HDD with the data . Then connect the EXFAT drive to the MBP and transfer the data to same.
2. Connect both drives to the MBP and open DISK UTILITY>RESTORE. Drag the drive with the data on it to the 'Source' field. Drag the EXFAT drive to the 'Destination' field. Click on the 'Restore' butt is on. After the transfer has been completed, close DISK UTILITY and place the data on the MBP where you want it.
Ciao.

I am a long time iTunes user but a new MacBook owner! :) I keep the majority of my music files on an external hard drive. I'm trying to view all those files on my MacBook through iTunes. With windows you would go to : File/Add To Library, and iTunes w

I am a long time iTunes user but a new MacBook owner! I keep the majority of my music files on an external hard drive. I'm trying to view all those files on my MacBook through iTunes. With windows you would go to : File/Add To Library, and iTunes would add all your selected files to your music library BUT WOULD NOT COPY THEM TO YOUR HARD DRIVE. In other words, if the external hard drive was connected, you could listen, drag/drop, and edit the files. When I tried the same thing with my new MacBook... it actually started coping the files to my MacBook harddrive. I don't want that, it's millions and millions of mp3's that I don't want to keep on my computer, only my external hard drive. Can anyone help? I'm sure it's something easy, I'm just so new to the Mac world. Being an iPhone owner for many many years I'm picking up things fast, but this is getting the best of me! Help !

In iTunes 11 uncheck the preferences setting in in the iTunes Preferences panel "Advanced > Copy Files to iTunes Media folder when adding to Library"

How can I move my project from external hard drive to my macbook pro?

How can I move my project from external hard drive to my macbook pro? every time I try to do some editing, the sequence is very slow, thanks in advance

Try here...
Setting-up a new Mac from an old one, its backups, or a PC

I would like to recover my bookmarks from my old hard drive that I now have as an external USB drive. The old OS was Vista; the new is Windows 7.

I recently had a new hard drive installed on my laptop; this hard drive has the Windows 7 OS on it.
At the same time, I had my old hard drive mounted in an SATB enclosure so that I could use it as an external USB drive. [I stupidly did not export my bookmarks before doing all of this]
Everything seems to work fine [I can see all of the files], but I cannot find out where my bookmarks are stored on the old hard drive.
Is it possible to find them and get them transferred over to the new hard drive??
Thanks!!

Bookmarks are stored in a file called places.sqlite inside the profile folder. You can copy that file from the old profile folder into your current profile folder. For details of how to find the profile folder see https://support.mozilla.com/kb/Profiles or http://kb.mozillazine.org/Profile_folder_-_Firefox
You can recover more than just the bookmarks - https://support.mozilla.com/kb/Recovering+important+data+from+an+old+profile

How to install Windows 7 from a USB drive!

This is even easier than installing Windows XP from a USB drive, and will also reduce the time taken to install Windows 7, it took me about 15 minutes!
The advice in the guide is also applicable to installing Vista.
You need basically:
a USB flash drive at least 4GB in size
a Windows 7 DVD
To sum up:
Format your USB drive, with the NTFS filesystem
Open Command Prompt as an administrator, and run the Bootsect.exe program off the Windows 7 CD to make the USB drive bootable
Copy the contents of the Windows 7 DVD to the USB drive
Restart your PC, press F11 (or whichever key it is) to access the Boot menu, and select your USB drive to boot from
Full guide here:
http://www.intowindows.com/how-to-install-windows-7vista-from-usb-drive-detailed-100-working-guide/

Quote from: bnborg on 16-February-11, 10:28:04
I have done this and it is simple.
I cleaned and (re)formated an 8GB flash drive under Windows7 using diskpart. I chose quick format and a fat filesystem. It doesn't need to be ntfs. I had diskpart mark the partition active. I copied the DVD contents to the flash drive. I also made a folder on it for motherboard drivers.
After that, I booted the drive on a new machine. Windows7 setup came up, and didn't find any hard drives, other than the USB flash drive. I clicked the button to load drivers, and pointed it to the folder I had copied them to on the flash. Windows installed without problems.
Hi bnborg..Do u mind sharing with me your motherboard driver folder? I have the MSI U135DX Netbook and each time I hit the button to install Windows 7 it asks me for some mobo driver...Think i might need it to get tru with a successful install..

How to run windows from an external usb drive

Hi,
I've just install windows using bootcamp. after that i restore that windows installed bootcamp volume to an GUID partitioned external HDD. Now it is shown in startup disc, but when i select that (external HDD) volume it is unable to start.
I don't know what to do? I just want to run windows from an external usb drive like i can run mac osx.
please help. thanks

Windows will not run from an external drive.

I want to dual boot Windows 8 on my 20-inch, Mid 2007 iMac, from an external USB drive.

I want to dual boot Windows 8 on my 20-inch, Mid 2007 iMac, from an external USB drive. The internal drive is completely dead, it doesn't even show up in Disk Utility. I'm running 10.8.2 from the external drive. When I start Boot Camp Assistant, at the Introduction page, when I press the continue button nothing happens. Do I have to have internal drive to run Boot Camp Assistant? Can anyone provide me with the steps to dual boot, with his setup? Thanks in advance!

Hi maczimillon,
Only follow these steps, it works for my:
Open "System Information" and note your "Boot ROM Version" (some like MBP51.007E.B06)
Navigate to "Utilities" in Finder and open the package contents of -BootCampAssistant.app- with right click. Duplicate the "Info.plist" file to the Desktop e.g. and open that with Text Editor.
You must locate the keys "DARequiredROMVersions"and "USBBootSupportedModels"
Add new strings with the information of your machine under booth keys (step 1), always respect the format, such as: <string>MBP51.007E.B06</string> for the frist key and <string>MBP51</string> for the second key.
Save changes and replace the original plist file (it may ask you to enter admin pass)
If you proceeded correctly you will see the checkbox "Create a Windows 7 USB install disk" enabled in Boot Camp Assistant.
Then you can follow the usual Boot Camp installation using your WIN8 DVD iso image . The assistant program will proceed resizing your disk partition and installing necessary drivers for your iMac.
I strongly recomends you to use thirld party's bootloaders like rEFInd (rEFIt) because of the Apple SMC versions of some old machines should not be able to boot properly from external devices like USB drives.

Does anybody knows how to install Windows 7 from a USB drive on 2010 MacBook Air running Lion?

Does anybody knows how to install Windows 7 from a USB drive on 2010 MacBook Air running Lion?

Tell my wife that!
This is the best I can do. This way you can use the 2011 MBA way to do things.
Look for the post from @jacktourist. (on page 2 about half way down) This seems to be the easiest.
There are a couple of more similar to this with pictures I've seen around but can't remember where.
Here's another search with added info. It's easier then it sounds.

How do i move my photos from external hard drive to my local mac book pro hard drive?

I have my iphoto files on an external hard drive. I need to move them to my local Mac Book Pro Hard drive and I want to do it accurately. Anyone have any advice?

THanks Niel.
In typical "me" fashion I asked the question and then did the leg work and researched the answer (instead of doing the research first!). I learned exactly what you have posted here. It sounds REALLY simple. Thanks!

Reducer error occurs - copy file fails from D to C while running recovery cd in windows 8,64 bit.

Sir I bought a new hp envy 15 j049tx on 25 October 2013 and it stopped working on 29 october 2013.Whrn I opened the laptop a blue screen appears written that "Your pc ran into an error and we are restarting for you. The laptop restarts and the same process keeps going on.
I told the Hp customer support, they asked me to run hard drive and memory tests. Both hard drive and memory test came out PASSED(both quick and extensive tests). Then they ordered hp recovery discs. When i received it while running the 1st cd an error came with label REDUCER-copy file failed from D... to C.... They then sent a technician who said that the recovery cd are faulty. Its Been a month and the problem still persists. They have ordered a new set of recovery cd. I hope to receive them by 22.I am very much worried. Its windows 8,64 bits os. Please reply. Is it recovery cd problem? Please tell what to do?

anyone found the fix for this?

How do you autorun a Flash Projector (Windows) from a USB drive?

I got a Windows Flash Projector (.exe) that I need to autorun from a USB drive. I just want the user to be able to plug in the USB drive to their machine and have it start running without any menus. I've been using the following with no luck:
[autorun]
open=KSF_USB_main.exe
The project is composed of a number of .swf files that load into the "KSF_USB_main.swf" file. There are also PDF and FLV links within some of the movies.
I have the "autorun.inf" file and all other files (including the .exe Projector file) on the USB drive. When I plug it in to a PC it brings up the "What Do You Want To Do?" window and doesn't autorun.
I've tried some 3rd party software that creates a menu file with no luck.
Any suggestions?

This feature may have been disabled in some versions of Windows and some types of USB drives:
http://support.microsoft.com/kb/971029
read carefully because it might be misleading at first glance.

HP dv6-6188ca windows 7 pro 64b amd chipset 8G locks up copying files to/from external usb drive

Similar Messages

Maybe you are looking for